A794516R0
DX-790-960-65-16.5i-M-R
EasyRET Single-Band Antenna with Integrated RCUs-2.0m
Antenna Specifications
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 12 , continuously adjustable
0° 6° 12° 0° 6° 12° 0° 6° 12°
Gain (dBi)
16.2 16.3 16.0 16.3 16.5 16.3 16.6 16.8 16.4
Side lobe suppression for first side 0° 6° 12° 0° 6° 12° 0° 6° 12°
lobe above main beam (Typ.) (dB) 17 19 20 17 19 20 18 20 17
Horizontal 3dB beam width (°) 69 68 65
Vertical 3dB beam width (°) 10.1 9.8 9.2
VSWR < 1.5
Isolation between ports (dB) ≥ 30
Front to back ratio, copolar (dB) Typ. 28
0° Typ. 25
Cross polar ratio (dB)
±60° ≥ 10
Max. power per input (W) 500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
Squint (°) Avg. 1.5
Tracking (dB) Avg. 1.0 (within 10dB HBW)
Impedance (Ω) 50
Grounding DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1936 x 259 x 135
Packing dimensions (H x W x D) (mm) 2255 x 305 x 190
Antenna weight (kg) 13.5
Clamps weight (kg) 2.5 (2 units)
Antenna packing weight (kg) 22.2 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
1936
1285
Frontal: 665 (at 150 km/h)
Wind load (N) Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 2 x 7/16 DIN Female
Connector position Bottom
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0B01 Mechanical downtilt: 0 - 16 ° 1.4 kg 1 (Separate packing)
1
A794516R0
DX-790-960-65-16.5i-M-R
EasyRET Single-Band Antenna with Integrated RCUs-2.0m
Integrated RCU Specifications
Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 5 (motor activated, 12V)
Power consumption (W)
< 0.5 (stand by, 12V)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 μs)
Lightning protection (kA)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol swi tching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: HWMxxx…...r
r - Red
790 - 960 MHz
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com
Any previous datasheet issues become invalid. 2 Issue: 2014-04-22
