Scribd
Upload
239 views2 pages

GMN International GMBH - Pulsation and Burst Pressure Test Stand (ISO 4548-5 & ISO 4548-6)

This document describes a test stand used to test hydraulic filters' ability to withstand pressure and determine burst pressure according to ISO 4548-6 and test filter durability to pulsation according to ISO 4548-5. The automatically controlled test stand gradually increases pressure and monitors filters' performance under pulsating and increasing static pressure loads.

Uploaded by

roooyy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
239 views2 pages

GMN International GMBH - Pulsation and Burst Pressure Test Stand (ISO 4548-5 & ISO 4548-6)

This document describes a test stand used to test hydraulic filters' ability to withstand pressure and determine burst pressure according to ISO 4548-6 and test filter durability to pulsation according to ISO 4548-5. The automatically controlled test stand gradually increases pressure and monitors filters' performance under pulsating and increasing static pressure loads.

Uploaded by

roooyy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

10/10/2016 GMN International GmbH: Pulsation and burst pressure test stand (ISO 4548­5 & ISO 4548­6)

Pulsation and burst pressure test stand (ISO 4548­5 & ISO 4548­6)

This kind of test stand is mainly used for testing hydraulic filters for their ability to withstand an internal pressure and for
determining their burst pressure according to  ISO 4548­6 standard as well as for testing the hydraulic pulse durability of filters
according to ISO 4548­5.

In order to detect such characteristics of a filter element, the testing pressure is gradually increased to determine how much
overload a filter element can endure before breaking completely. Pulsation test is performed by means of a cold start
simulation. This method of testing defines the ability of filters to withstand an internal pressure surge such as occurs when an
engine is started from cold.

This test stand is automatically controlled by the computer, the flow chart and all the test parameters are displayed on the
screen, either in form of data or in form of a curve. Data handling and generation of reports according to ISO 4548­5 and ISO
4548­6 standards are included.

Applicable tests
The test stand is designed as a pulsation and burst pressure test stand acc. ISO 4548­5 and ISO 4548­6 as a part of the filter
manufacturing process and quality monitoring center.

Following tests can be performed with the test stand:

Pulsation test acc. ISO 4548­5
Burst pressure test acc. ISO 4548­6

This test stand can be also configured and quoted according to your individual specifications.

Data Sheet (Example)

Filter type: hydraulic, oil fuel filters (other types are also possible)
Filter diameter: 70 ­ 140 mm
Filter height: 40 – 350 mm
No. of test stations: 3 parallel stations
Pulsation pressure: 0 ­ 50 bar, max. frequency 3 Hz
Pulse wave: trapezoidal, sinusoidal, special waves controlled by PLC
Burst pressure: 0 ­ 100 bar
Hydraulic fluid: Castrol Magna 100
Oil temperature: 30 ­ 80°C

© 2013 GMN International GmbH ­ All rights reserved.

http://www.gmn­gmbh.net/pulsschlag­berstdruck­pruefstand.html?&L=1&print=1&cHash=2e57f37d7cad783e70baa34a87c83286 1/2
10/10/2016 GMN International GmbH: Pulsation and burst pressure test stand (ISO 4548­5 & ISO 4548­6)

http://www.gmn­gmbh.net/pulsschlag­berstdruck­pruefstand.html?&L=1&print=1&cHash=2e57f37d7cad783e70baa34a87c83286 2/2

You might also like