Service Bulletin Priority IV
Construction Technique Service
1. General information
ACCIPX v3.14 updated with CAT- and Mercedes driven
compressors build before 2007
Publication Number : SB APP 2848 rev 1
Priority : IV
Applicable to : GAC41 OIA
PGC : 410,411,412,413,414,419
Responsible person : Kristine Vandebosch
2. Document overview
This document describes the following:
1. General information ........................................................................................................................................................ 1
2. Document overview ........................................................................................................................................................ 1
3. Revision History.............................................................................................................................................................. 1
4. Reason for this bulletin ................................................................................................................................................... 2
5. Description ..................................................................................................................................................................... 2
6. Application ...................................................................................................................................................................... 2
7. Required parts ................................................................................................................................................................ 2
8. Planning ordering parts at distribution center ................................................................................................................. 3
9. Reimbursement criteria .................................................................................................................................................. 3
10. Reporting ........................................................................................................................................................................ 3
11. Safety precautions .......................................................................................................................................................... 3
3. Revision History
REVISION DATE REVISION SUMMARY AUTHOR
01 14/2/2017 Update on application for ACCIPX v3.14.3 Kristine Vandebosch
00 2/2/2016 First issue Kristine Vandebosch
This is an Atlas Copco internal document. It is not to be shared with distributors, dealers or customers!
14/02/2017 Page 1 of 3
4. Reason for this bulletin
A number of programming issues with ACCIPX v3.14.3 (9822927800) have been reported.
5. Description
ACCIPX v3.14.3 9822927800 is NOT compatible with software versions v5.xx and v6.xx
ACCIPX v3.14.3 9822927800 is ONLY replacing ACCIPX v3.08 and is ONLY compatible with software version v3.xx
(S1.5) and v4.xx (S2).
For software versions v5.11 and v6.02 ACCIPX v3.14 remains applicable.
Both ACCIPX versions require a Windows 7 laptop.
6. Application
All machines with the old type of controller:
1) T2 Mercedes + CAT driven machines with sw versions v3.xx and v4.xx ACCIPX v3.14.3 (9822927800)
2) T3 CAT driven machines with sw versions v5.11 and v6.xx ACCIPX v3.14 (9822100513)
7. Required parts
Description File Nr.
ACCIPX v3.14.3 9822 9278 00
ACCIPX v3.14 9822 1005 13
Description Pn
CAN - USB converter
1626 8046 00
(Peak IPEH-002021)
For other hardware part numbers please refer to “Service Tools” doc. nr. 2915 6616 00 published on GBP.
New ACCIPX utility software (ACCIPX v3.14.3 document nr 9822 9278 00; ACCIPX v3.14 document nr 9822 1005
13) can be found on the Business Portal.
This is an Atlas Copco internal document. It is not to be shared with distributors, dealers or customers!
14/02/2017 Page 2 of 3
8. Planning ordering parts at distribution center
Utility software available for download from the Construction Technique Business Portal.
9. Reimbursement criteria
N/A
10. Reporting
To be reported via WOL as a Service report.
11. Safety precautions
The operator must employ safe working practices and observe all related local work safety requirements and regulations.
Maintenance must only be performed by authorized and trained personnel.
Before starting any work on the equipment, stop the equipment, switch off the voltage, and press the emergency
button. In addition, the power isolating switch must be opened and locked.
Refer to the Instruction book and/or workshop manual for any additional safety precautions
Disconnect any remote start controller
A ‘Work in progress; do not start’ warning sign shall be attached to the starting equipment.
All maintenance work shall only be undertaken when the equipment has cooled down.
Effectively isolate the machine from all sources of pressure and / or electrical power and relieve the entire system of
pressure.
Use only the correct tools for maintenance and repair work.
Observe cleanliness during maintenance and repair. Cover parts and exposed openings.
Make sure that no items are left behind in or on the equipment.
All regulating and safety devices shall be maintained to ensure correct functionality.
They will not be put out of service.
Always wear personal protective equipment (Work clothing, safety shoes, safety goggles, ear protection, safety
gloves,…)
This is an Atlas Copco internal document. It is not to be shared with distributors, dealers or customers!
14/02/2017 Page 3 of 3
