ICR–3231, ICR–3231W
INDUSTRIAL IoT 4G LTE ROUTER & GATEWAY
+ 4G LTE Cat.4 VPN Gateway for Industrial IoT applications
+ Powerful CPU with 1.3 GB storage to host customer SW applications
+ 2× SIM with cover, eSIM ready
+ 2× Ethernet 10/100, 1x RS232, 1x RS485 and I/O
+ Optional Wi-Fi 802.11ac using MU-MIMO technology
+ Optional GNSS receiver
+ Robust metal cover with DIN and Wall mount options
+ Operational temperature range from -40 °C to +75 °C
+ Backup real time clock
+ Sleep mode & Power ignition
The ICR-3200 LTE gateway is the perfect way to connect IP or serial devices to a cellular The ICR-3200 places intelligence at the network edge with an extremely powerful
network. Industrial M2M and IoT applications include kiosks, industrial PCs, HMIs, traffic Cortex A8 CPU at 1GHz, 512 MB RAM and 4 GB EMMC FLASH memory in pSLC mode for
controllers, meters, UPS systems, and much more. a long-lifetime and critical industrial applications. 1.3 GB of memory space is allocated
for customer SW applications and data. With open Linux platform and wide posibilities
With LTE Cat.4 upload speeds of up to 50 Mbps and download speeds of up to 150 Mbps, of programming customer SW applications in Python, C/C++ or browser-based flow
the router provides ample bandwidth for high data demand applications such as CCTV or editor Node-RED the ICR-3200 offers a real open development platform for Industrial
public Wi-Fi hotspots. IoT applications. The Advantech existing app library (User modules) with apps already
developed to enhance specific router functionality including industrial protocol
In addition to its two independent or switched Ethernet ports, serial ports RS232 and conversions and support of IoT platforms such as MS Azure, Cumulocity, ThingWorx and
RS485, ICR-3200 has built-in digital I/O connectivity, backup real-time clock and sleep others are supported on the router.
mode support. The device has two SIM readers protected by metallic cover for carrier
failover redundancy. As an addition the router is ready to use internal eSIM. ICR-3200 is easy to install using WebAccess/DMP, a full featured configuration and
monitoring tool for mass deployment. The router also supports additional traffic and
Optional built-in GNSS chipset provides information about the accurate position of the health monitoring software R-SeeNet.
router. An optional built-in Wi-Fi module is also available, with 802.11a,b,g,n,ac modes and
MO-MIMO support is appropriate for on-board Wi-Fi transport applications.
The router supports VPN tunnel creation using various protocols to ensure safe
communications. The router provides diagnostic functions which include automatic
monitoring of the wireless and wired connections, automatic restart in case of connection
losses, and a hardware watchdog that monitors the router status.
ORDERING INFORMATION – Antennas & Power Supplies Sold Separately
RS232 LTE WI-FI
MODEL NO. - ORDER CODES REGION 2× ETHERNET RS485 GNSS I/O ANT + DIV 2× SIM 802ac 2x MIMO
ICR-3231 EMEA
ICR-3231W EMEA
* Check availability of another models for various world regions at our corporate website or with your local distributor.
All product specifications are subject to change without notice.
www.advantech-bb.com / Enabling an Intelligent Planet ICR3231 - February 7, 2019 10:10 AM
ICR–3231, ICR–3231W
INDUSTRIAL IoT 4G LTE ROUTER & GATEWAY
ACCESSORIES - INCLUDED ACCESSORIES - SOLD SEPARATELY
DESCRIPTION ORDER CODE DESCRIPTION
Wall mount kit BB-GA.110.101111 Antenna LTE, Magnet Mount
DIN clip BB-DIN-ICR32 BB-TG.10.0113 Antenna LTE, Terminal
Serial / IO connector BB-CON-ICR32-10 BB-AW-A2458G-FSRPK Antenna Wi-Fi 2.4 & 5.8 GHz
PWR connector BB-CON-WR2 BB-AP-AGNSS-SMA Ant GPS/GLONASS, magnetic, cable 3m, SMA-M
Quick Start Guide BB-RPS-v2-WR2-AUS Wall mount Power Supply 12V/1A, AUS plug
BB-RPS-v2-WR2-EU Wall mount Power Supply 12V/1A, EU plug
BB-RPS-v2-WR2-UK Wall mount Power Supply 12V/1A, UK plug
BB-RPS-v2-WR2-US Wall mount Power Supply 12V/1A, US plug
SPECIFICATIONS
NETWORKING
Network and Routing DHCP Server, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, DMVPN, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup
Routers, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack
Security HTTPS, SSH, VPN tunnels, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
VPN Tunnelling Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, IPSec with IKEv1 and IKEv2
Configuration Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server,
Backup configuration, Restore configuration
Firmware Management Automatic firmware updates from the server, locally via LAN or remotely via WAN (HTTP, HTTPS), Over-the-Air cellular module firmware updates
Diagnostic One CLICK report - current configuration / factory identification / system log / kernel log / reboot log /
routing table, Remote diagnostics possible via SSH
Status Network Status, DHCP Status, IPSec Status, Statistics history for last 60days
Log System Log, Reboot Log, Kernel Log
Controlling and Diagnostic SMS, SNMP v1/v2c/v3, Statuses
Event Engine StartUp script & Up/Down script (Bash, Python), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature. Report Types: SMS, email, SNMP Trap
Industrial Protocols Modbus RTU/TCP gateway, IEC 60870-5-101 to 104 gateway, DF1, DNP3
Applications Development Open Linux, Python, BASH, C/C++, Node-RED
PORTS, LED, ANTENNAS CPU, MEMORY
2× Ethernet RJ45, 10/100 Mbps CPU power 2 DMIPS per MHz
2× SIM Mini SIMs (2FF) RAM 512 MB
LED indicators PWR, SIGNAL, DAT, SIM1, SIM2, USR, ETH 2× 256 MB FW
Flash memory 512 MB - User data storage
2× ANT SMA connectors 838 MB - Space for User Modules
GNSS (GPS, GLONASS) - *optional SMA connector
2× MIMO WiFi antenna - *optional R-SMA connector MECHANICAL
1× RS232, 1× RS485 (10-Way Terminal block) Metal case, Metal DIN rail, Wall mount kit Metal
I/O 1x Digital Input (On Voltage: 2.7V to 36VDC) Enclosure Dimensions 55 × 97 × 125 mm (150mm including DIN)
1x Binary Output (10-Way Terminal block) Weight - ICR-3231 477 g
Weight - ICR-3231W 497 g
CELLULAR MODULE PARAMETERS
LTE: Cat.4, 3GPP E-UTRA Release 11
FDD frequencies: 700 MHz (B28A), 800 MHz (B20), 900 MHz
(B8), 1800 MHz (B3), 2100 MHz (B1), 2600 MHz (B7)
TDD frequencies: 2300 MHz (B40), 2500 MHz (B41), 2600 MHz (B38) Supported frequencies: 900 MHz, 1800 MHz
LTE parameters EDGE parameters
LTE FDD bit rates: 150 Mbps (DL) / 50 Mbps (UL) Data throughput: max. 236.8 kbps
LTE TDD bit rates: 130 Mbps (DL) / 35 Mbps (UL)
Supported bandwidths: 1.4 MHz, 3 MHz, 5 MHz, 10 MHz,
15 MHz, 20 MHz
HSPA: 3GPP R8 DC-HSPA+
Supported frequencies: 900 MHz, 1800 MHz
HSPA+ parameters Supported frequencies: 900 MHz, 2100 MHz GPRS parameters
Data throughput: max. 85.6 kbps
Bit rates: 42 Mbps (DL) / 5.76 Mbps (UL)
Supported frequencies: 900 MHz, 2100 MHz
UMTS parameters
Bit rates: 384 kbps (DL) / 384 kbps (UL)
ICR–3231, ICR–3231W
INDUSTRIAL IoT 4G LTE ROUTER & GATEWAY
SPECIFICATIONS - CONTINUED
POWER, CONSUMPTION, ENVIRONMENTAL, IP COVER WI-FI
Power Supply 9–36VDC (2-Way Terminal block) Antenna Connector 2× R-SMA – 50 Ohms (MU-MIMO)
Power Consumption with WiFi - Idle / Average / Peak / Sleep Mode 2.5 / 4 W / 11 W / 10 mW Supported WiFi Band 2.4 GHz to 2.495, 5.15 GHz to 5.825 GHz
IEEE 802.11ac Wave 2, 802.11d, 802.11e,
Temperature Range – Operating / Storage -40 to +75 °C / -40 to +85 °C Standards
802.11h, 802.11i, 802.11r
Humidity – Operating / Storage (noncondensing) 0 to 95 % / 0 to 95 % Security - Standards WEP, WPA, WPA2
Cold Start -40 °C Security - Encryption WEP, TKIP, AES
Operating Altitude 2000 m / 70 kPa EAP-FAST, EAP-TLS, EAP-TTLS, PEAP-GTC,
Security - EAP Types
PEAP-MSCHAPv2, PEAP-TLS, LEAP
Enclosure Rating IP30 802.11a, 802.11b, 802.11g, 802.11n,
Grounding screw WiFi Standards 802.11ac Wave 2 WPA Enterprise, WPA2
Enterprise
Type of Device Access point, station
STANDARDS AND REGULATIONS GNSS specifications
EN 301 511 v12.5.1, EN 301 908-1 v11.1.1, Antenna 50ohm - active
Radio EN 301 908-2 v11.1.2, EN 301 908-13 v11.1.2, Protocols NMEA 0183
EN 303 413 v1.1.1, EN 301 893 v 2.1.1, EN 300 328 v2.1.1
GNSS Systems GPS, GLONASS, BeiDou, Galileo, QZSS
EN 301 489-1 v2.2.0, EN 301 489-19 v2.1.0,
EMC EN 301 489-52 v1.1.0, EN 301 489-17 v3.1.1, GPS/Galileo/QZSS: 1575.42±1.023MHz
EN 61000-6-2 :2005, EN 61000-6-5 :2015 Frequency GLONASS: 1597.5 – 1605.8MHz
BeiDou: 1561.098±2.046MHz
Safety EN 62368-1, EN 50665
Tracking: -157dBm
Sensitivity (autonomous) Reacquisition: -157dBm
Cold start: -146dBm
Hot start: 2.5 s
Acquisition time
Warm start: 26 s
(autonomous)
Cold start: 35 s
Accuracy < 1.5m
ICR–3231, ICR–3231W
INDUSTRIAL IoT 4G LTE ROUTER & GATEWAY
MECHANICAL DRAWING
FRONT VIEW REAR VIEW
LED Indicators ETH 10/100 connectors Robust metal case Label with technical details Robust metal DIN holder
RESET button PWR connector DIV, ANT antenna connector Wall Mounting
LEFT SIDE VIEW RIGHT SIDE VIEW
Ground Clamp - Screw Label with technical details
Primary and backup SIM for cellular module Serial port RS232 - RS485 GPS, WiFi antennas
