THE

POWER
OF RED™
SYMONS SOLDIER
CONSTRUCTION BEAMS

CONCRETE
CONSTRUCTION
SOLUTIONS

BROCHURE
 Symons Soldier Design

The Symons Soldier system is a lightweight,

yet extremely strong, construction beam
system with virtually unlimited application
possibilities.
Symons developed a unique hole pattern
which makes the Symons Soldier adaptable
to almost any forming or shoring
configuration with standard components
and accessories.

Versatility
The unique hole pattern and a complete
line of accessories give the Soldier the
versatility you expect from Symons.
The Soldier system complements the
advantages of standard Symons forming
systems. No other form supplier can offer
such a wide range of product combinations
to handle a diversity of applications.

Simplicity
The ability to bolt to all the flanges adds to
the efficiency of Soldier. When bolted end-
to-end as a continuous beam, the connection
Symons Soldier beams permit bolting on develops the full strength of the Soldier.
all four flanges in addition to end and Rentable
web bolt holes. The flange holes are Symons Soldier beams and accessories are a rentable system,
a combination of holes and slots at 3" providing cost savings compared to high-priced lumber
centers to provide dimensional adjustment components. With Symons Soldiers, unusual requirements can be
and versatility. satisfied with standard components.
Symons Soldier Properties Durability
I xx = 56.3 in4
I yy = 27.3 in4 Symons Soldiers are fabricated with high-strength steel to provide
high load capacity and long service life. They have a robust
Soldier End Plates are high-strength steel, strenght to weight ratio, resulting in reduced crane capacity
built square to the Soldier beam, enabling requirements.
the end-to-end bolted connections to
develop the full strength of the Soldier Practicality
beam. It is designed to be a compression Your next forming or construction dilemma could be solved effi-
member. If used as a beam, consult ciently with Symons Soldier. Use them as braces, walers, strong-
Dayton Superior prior to design. backs, shoring, aligners, trusses or whatever the situation demands.
Part Length Weight
1'-6" 45 lbs.
38900 457.2 mm 20.41 kg
2'-0" 52 lbs.
38903 609.6 mm 23.59 kg
3'-0" 67 lbs.
38917 914.4 mm 30.39 kg
4'-0" 83 lbs.
38901 1219.2 mm 37.65 kg
8'-0" 148 lbs.
38902 2438.4 mm 67.13 kg
12'-0" 212 lbs.
38904 3657.6 mm 96.16 kg

2 WWW.SYMONS.COM 06/16
 Applications

Bracing
Symons Soldiers are ideally suited for
diagonal bracing and plumbing. The
ability to bolt end-to-end can create
bracing lengths to fit your specific project
requirement.

One-Sided Forming
Symons Soldier and Symons standard
forming systems are used to create tieless
one-sided wall forming schemes, providing
substantial savings in time and labor costs.

Shoring
Symons Soldier and standard accessories can be combined to
make towers that fit the most demanding shoring and deck
support applications.

Alignment
Symons Soldier and accessories are
designed for use with other Symons
forming systems. Symons Soldier and
Symons total product capability offers
unlimited possibilities for any aligning and
support application.

Walers
Symons Soldier beams are ideally suited
for any waler application. When bolted to
any Symons steel form system, the Symons
Soldier has the capacity to handle the
tallest gangs.

06/16 The Power of Red™ | 3

 Accessories

One-Sided Bracket Pivot Bracket

Used in conjunction with When bolted to the
the Wedge and Shear end of the Soldier
Plates in one-sided wall Beam, the Pivot
forming applications, Bracket provides
the One-Sided Bracket the connection
connects the Soldier beams between the Soldier
together at the base of the beam brace and
forms and provides the forming system.
anchor position.

Shore Jack
The jack provides 8" of adjustment in Symons Soldier
reshore applications.

45° Bracket
The fixed 45° bracket can be
used for diagonal bracing and
truss configurations.

Adapter/Spacer
Bolt the 10" swivel
wheel for traveling Strut Jack with
applications or use Jack Base
as a 3" spacer. The free-turning
nut allows up to 16"
Riser Bracket adjustment, and the
Swivel ability coupled with vertical Jack Base pivots.
adjustment meets most stair and
seating riser conditions.

Tie Washer Plate

Plate provides bearing surface for ties
and nuts in forming applications.

Attachment Angles
Bolt Soldier beams to Max-A-Form® or
Versiform® gangs.

Jack Bracket
Bracket is used
in one-sided
applications for aligning and leveling the
support frame and form gang.

Lap Splice Plate

Splice from beam-
to-beam in truss
applications.

4 WWW.SYMONS.COM 06/16
 Typical Applications

End Plate Cross Section

Typical End-to-End Connection

Contact Customer Service for additional details or assistance.

06/16 The Power of Red™ | 5

 1125 Byers Road
Miamisburg, OH 45342
937-866-0711
800-800-7966
WWW.SYMONS.COM

THE
POWER
OF RED™

SYM92299
06/16
Copyright © 2016 Dayton Superior Corporation, All Rights Reserved.