Scribd
Upload
107 views2 pages

Lesson 4: Maintain Hand Tools: Information Sheet 4.1

This document discusses the proper maintenance and storage of hand tools. It states that all tools must be properly maintained through regular inspections and preventative maintenance to ensure worker safety. A successful maintenance program is well-organized, controls hazards, defines procedures, and trains personnel. Hand tools may only require basic maintenance like ensuring blades are replaced when dull and guards are in working order. Tools should be stored properly by labeling parts and placing tools in designated spots on boards or in bins to make them easy to find and prevent loss. Proper storage keeps tools in good condition, reduces costs, and increases productivity.

Uploaded by

Michelle Arnon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
107 views2 pages

Lesson 4: Maintain Hand Tools: Information Sheet 4.1

This document discusses the proper maintenance and storage of hand tools. It states that all tools must be properly maintained through regular inspections and preventative maintenance to ensure worker safety. A successful maintenance program is well-organized, controls hazards, defines procedures, and trains personnel. Hand tools may only require basic maintenance like ensuring blades are replaced when dull and guards are in working order. Tools should be stored properly by labeling parts and placing tools in designated spots on boards or in bins to make them easy to find and prevent loss. Proper storage keeps tools in good condition, reduces costs, and increases productivity.

Uploaded by

Michelle Arnon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LESSON 4:

MAINTAIN HAND TOOLS

Information Sheet 4.1


What do you need to know?
Read Information Sheet 4.1 very well then find out how much you can
remember and how much you learned by doing Self-check 4.1.

TOOLS AND EQUIPMENT MAINTENANCE

All tools and equipment must be properly maintained so


that workers are not endangered. Regulations require
inspections of tools, machines and equipment before use.
Preventive maintenance is the systematic care and protection of
tools, equipment and machines in order to keep them in a safe, usable
condition, limit downtime and extend productivity. We must always be aware that maintenance
tasks themselves are potentially hazardous and can result in injury. The successful maintenance
program is:
well organized and scheduled,
controls hazards,
defines operational procedures, and
trains key personnel
The degree of detail to include regarding tools and equipment maintenance will depend on
the kinds of tools/equipment used. Some construction equipment may have very specific
inspection and maintenance requirements. Electronic equipment may have different maintenance
requirements. Hand tools may require only basic maintenance. Power tools should be maintained
in good working order. This may be limited to ensuring that blades/bits are replaced when
needed and those guards or other safety devices are operable and any damaged electrical
cords/plugs are repaired or replaced. Damaged or defective equipment/tools should be tagged
and removed from service.
Most manufacturers can provide maintenance schedules for their equipment. Large
companies typically have a comprehensive maintenance program due to the capital investment
and/or leasing agreements. Smaller companies may lease equipment and maintenance services
may be included in the leasing agreement.

PROPER STORAGE OF TOOLS, PARTS, AND EQUIPMENT


To ensure that tools and equipment remain in good condition and last for a long time, store them
properly. Properly stored tools and equipment will be easy to find when needed and are less
likely to be lost.
Good practices include:
Parts should be properly stored and labeled (Figure 1).
Tools should be properly placed on the board, and labeled (Figure 2). Consider drawing
the shapes of the tools on the board so that they always get put back in the same position.
Use bins for storing small parts (Figure 3).
Consider making an individual (or individuals) responsible for the good maintenance of
tools and parts.

Figure 1 Figure 2 Figure 3

Benefits:
Tools and parts are kept in good condition and are easy to find
Costs are reduced.
Productivity is increased because time is not wasted looking for tools, parts and
equipment.
Workshop staff develop a sense of responsibility and pride in their work.

You might also like