Flat flame burners
_______
FLOOR OR WALL FIRING SPECIAL BURNERS
I.C.E. has a broad range of flat flame burners available to fit
different process needs. Floor fired or sidewall fired, we can
fit different mechanical needs depending on licensor firebox
design.
Firing characteristics and heat flux (of capital importance in
ethylene cracking furnaces and other special heaters) are
customized according to designers needs.
Even wall covering, compact or long flame, dimension of
expected flame, are parameters I.C.E. will take care, to fit
requirements.
Burners are available natural or forced draft, with preheated air
up to 450°C.
Liquid firing flat flame are also available.
Technical features
MECHANICAL & CONSTRUCTION
CHARACTERISTICS
Cabinets:
• CS / LTCS / SS
Nozzles:
• AISI 310/HK
Refractory:
• 60 / 70 / 80 / 90% Al2O3 on request
Piping:
• As per API code / design requirements
Air damper:
• With single or multiblades
PROCESS DATA / APPLICATIONS
Available duties:
• 0.2 to 4.0 MW
Staged fuel / staged air design.
Excess air:
• 10% to 25%
Narrow, flat flames along the wall,
customized wall covering raw or staged
fuel design according to pollutant
emissions requirements.
Available dual fuel (liquid / gaseous).
Very high turn-down ratio (10:1 or
in excess). For high temperature
applications (reformers / cokers).
TYPICAL APPLICATIONS
Delayed cokers.
Terrace wall® design.
Double fired furnaces external rows.
Ethylene cracking furnaces.
I.C.E. S.r.l.
Headquarters Workshop / Test Area
Via Cesare Battisti, 112 Via degli Artigiani, 25/27
20862 Arcore (MB) - ITALY 26010 Cremosano (CR) - ITALY
Ph +39 039 61 80 445 Ph +39 0373 27 36 54
Fax +39 039 61 68 84 Fax +39 0373 29 12 59 RINA, certificate n° 20585/09/S
[email protected] - www.it-ice.com
