LT05+ Technical Specification & Command List
LT05+ Technical Specification & Command List
1 Description
LT05+ is a vehicle GPS Tracker with wide range voltage input, compact size, and built-in
built
GPS/GSM antenna. It’s ideally suitable for motorcycle, electro mobile and common vehicles
in the anti-theft and tracking market.
2 Highlights
◆ Wide range voltage input range: DC 9-100V
◆ Supports GPS/BeiDoudual ual-mode positioning
◆ ACC detects engine status and indicates the vehicle status
◆ Supports OTA upgrading, re reduce maintenance on site
◆ Supports to connect engine cut relay, remote to control the vehicle
◆ Real-time
time GPS tracking, History playback, Blind data storage, Cornering
compensation
◆ Supports 2 guardian numbers to remote monitoring and receiving alarms
◆ Built-in G-sensor
sensor to save the power in the sleeping mode and anti-theft
theft reminding
◆ Built-in back-upup battery, accomplish to trigger the power off alarm when the power
line is cut illegally
3 Function
◆ Real-time
time tracking monitoring
◆ LBS Positioning
◆ Cornering compensation
◆ Over-Speed alarm
◆ Illegal Movement alarm
◆ Power off alarm
◆ Intelligent remote control
◆ Mileage statistics
Rev 1.0
LT05+ Technical Specification & Command List
4 Specification
Mechanical Dimension 82mm*23mm*13mm
Parameters Weight 26g
Data transmission GPRS/SMS
Positioning method GPS/BeiDou/LBS
Built-In battery NI-MH AAA 3.6V/110mA, mA, working for 2 hours
Data Storage 1300 pcs
Average Current: <30mA (DC 12V)
Power
Maximum current: <10mA (DC 12V)
Channels: 50
Sensitivity: -147dBm
Position accuracy:5-10m
GPS/BeiDou
Accuracy: 5m CEP
Cold start: <27s
Hot start: <1s
Working Frequency: 850/900/1800/1900MHz
Network protocol: Embedded TCP/IP stack
Sensitivity: -107dBm@850/900MHz
GSM -106dBm@1800/1900MHz
106dBm@1800/1900MHz
Output power: Class 4 (2W)@850/900MHz
Class 1 (1W)@1800/1900MHz
GPRS data: GPRS Class 10, Mobile Station Class B
LED Indication GPS/GPRS
Working
Environmental Temperature -20℃~ +70℃
Parameter
Humidity 5%~95% (no fog)
Rev 1.0
LT05+ Technical Specification & Command List
Command List
Function Command Examples reply
LEVEL,S#
S:sensitivity, 1/2/3/4/5
indicates
Set vibration
highest/high/middle/low LEVEL,3# LEVEL:3
sensitivity
/lowest, default value is 2
LEVEL# check
sensitivity
TIMER,T1,T2,T3#
T1:ACC ON upload
interval,5-300s,default
300s,default
15 seconds
T2: ACC OFF upload
interval,5-300
300 seconds,
Set upload TIMER,30,60,30
default 120 seconds TIMER:30,60,300
interval 0#
T3: heartbeat upload
interval,10-1800
1800 seconds,
default 180 seconds
TIMER# check upload
interval
SLEEP,T#
T=How
=How long the device
will sleep when no
vibration
,default:5minutes SLEEP,5# SLEEP:5 minutes
set sleep time
T=0 Switch off SLEEP,0# SLEEP:0,off
automatic sleep function
SLEEP# check sleep
time
Rev 1.0
LT05+ Technical Specification & Command List
[VERSION]MT02S-4.12.128.10
[VERSION]MT02S
Check version VERSION# VERSION#
2019-08-06
Device
Check IMEI:80222001633;TIMER:30,
PARAM# PARAM#
parameters 60,300;SOS:,,;CENTER
Number:;Time zone:+5:30
GPRS:ON;APN:CMNET,,;Serve
check GPRS
GPRSSET# GPRSSET# r1:www.365qczx.com:6000,0;
parameters
Server2:
GPRS:link up;GSM signal
level:weak;GPS:Successful
Check stuatus STATUS# STATUS#
positioning;ACC:ON;UTC:201
9-08-06
06 09:13:45
http://maps.google.com/map
Check location WHERE# WHERE#
s?q=N22.56275,E113.93969
Restore to
FACTORY# FACTORY# Restore All The Parameters!
factory
The device will restart after
Reboot RESET# RESET#
20sec!
ICCID:898604121018C097851
6
check ICCID of
ICCID# ICCID# IMSI:460043225108517
SIM card
Module
IMEI:866405030061489
ALARMSPEED,A,B#
A: overspeed alarm
status, ON/OFF, default: ALARMSPEED,O
Set overspeed OFF N,100# ALARMSPEED:ON,100km/h
alarm B: speed threshold
threshold, ALARMSPEED,O ALARMSPEED:OFF
default 255km/h FF#
ALARMSPEED# Check
the current value.
Rev 1.0
LT05+ Technical Specification & Command List
APN,[APN name]#
APN,internet#
APN,[APN name],[user
APN,iot.com,12 APN:internet
set APN name],[user password]#
3,123# APN:iot.com,123,123
APN# Check current
APN#
APN parameter
SERVER1,[domain],[port],
SERVER1,www.3
0# SERVER1:www.365qczx.com,
65qczx.com,777
SERVER1,[IP],[port],0# 7771,0
Set main server 1,0#
SERVER1# Check the SERVER1:119.23.233.52,7771,
SERVER1,119.23
current main server 0
.233.52,7771,0#
parameter
SERVER2,[domain],[port],
0# SERVER2,www.3
SERVER2:www.365qczx.com,
SERVER2:www.365q
SERVER2,[IP],[port],0# 65qczx.com,777
7771,0
Set secondary SERVER2,,,# delete 1,0#
SERVER2:119.23.233.52,7771,
server secondary server SERVER2,119.23
0
SERVER2# Check the .233.52,7771,0#
SERVER2:
current secondary server SERVER2,,,#
parameter
OTA:www.365qczx.com,7771
OTA,www.365q ,MT02S-3.5
czx.com,7771,M OTA:119.23.233.52,7771,MT0
OTA,[domain],[port],[vers
T02S-3.5# 2S-3.5
ion]#
OTA,119.23.233. OTA:Cancel upgrade success
OTA command OTA,[IP],[port],[version]#
52,7771,MT02S- OTA:119.23.233.52:7771,T,M
OTA,0# Cancel upgrade
3.5# T02S-3.5,1,181
3.5,1,181
OTA# Check OTA status
OTA,0# notes: total
OTA# package:181,dowload
package:1
GMT,T#
GMT,+5:30# GMT:+5:30
set time zone T:time zone
GMT,-12:00# GMT:-12:00
GMT# check time zone
Rev 1.0
LT05+ Technical Specification & Command List
SOS,A,[Phone1],[Phone2] SOS,A,10000,10
SOS:10000,10086
set SOS number # 086#
SOS:10000,
SOS# check SOS number SOS,A,10000,#
delete SOS SOS,D,[No.1],[No.2]# SOS,D,1,# SOS:,10086
number SOS# check SOS number SOS,D,1,2# SOS:
Set initial MILEAGE,T#
MILEAGE,1000# MILEAGE:1000km
mileage T:mileage,unit:km
CENTER,A,Phone NO.#
add center number
CENTER,A,10086
set center CENTER,D# delete center CENTER:10086
#
number number CENTER:
CENTER,D#
CENTER# check center
number
Cut off the fuel
RELAY,A# RELAY,1#
fuel supply supply:Success!
A=1 cut off fuel supply RELAY,0#
control Open the fuel supply success!
A=0 open fuel supply RELAY#
fuel supply is on
SENALM,A<,M>#
<,M>#
A=ON/OFF;
default:OFF;
set vibration M:alarm type,0:GPRS SENALM,ON,1# SENALM:ON,1
alarm only,1:GPRS+SMS,default SENALM,OFF# SENALM:OFF
:0
SENALM# check vibration
paramters
Rev 1.0
LT05+ Technical Specification & Command List
MOVING,A<,R,M>#
A=ON/OFF;
default:OFF;
R=100~2000;
;radius
,unit:meter, MOVING,ON,200
MOVING:ON,200,1
set move alarm default:500; ,1#
MOVING:OFF
M:alarm type,0:GPRS MOVING,OFF#
only,1:GPRS+SMS,default
:0
MOVING# check vibration
paramters
http://maps.google.com/map
s?q=N22.56275,E113.93969
get google link
*11*3# *11*3# Speed:0km/h;Mileage:100km
and status
;GPS:A,5;RSSI:20;Power:14.2V
;2019-08-06
06 11:43:09
Online: IP1
CMNET,119.23.233.52:6000,T
ID: 80222001633,id
get GPRS status *11*4# *11*4#
GPS=A,5;GSM=20
MT02S-4.12.128.10
4.12.128.10
2019-08-06
Rev 1.0