Scribd
Upload
1K views1 page

Drill Pipe Performance Characteristics Sheet

This document provides specifications for a drill pipe including: 1) The pipe is 5" diameter with a 0.362" wall thickness and has a NC50 tool joint. 2) Performance data includes a torsional strength of 57,633 ft-lbs and tensile strength of 553,833 lbs for the pipe body. 3) The tool joint has a 6.625" outer diameter, 3.250" inner diameter, and torsional strength of 51,447 ft-lbs.

Uploaded by

Dheeraj Kapoor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Drill Pipe Performance Characteristics Sheet

This document provides specifications for a drill pipe including: 1) The pipe is 5" diameter with a 0.362" wall thickness and has a NC50 tool joint. 2) Performance data includes a torsional strength of 57,633 ft-lbs and tensile strength of 553,833 lbs for the pipe body. 3) The tool joint has a 6.625" outer diameter, 3.250" inner diameter, and torsional strength of 51,447 ft-lbs.

Uploaded by

Dheeraj Kapoor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DRILL PIPE PERFORMANCE CHARACTERISTICS SHEET

DRILL PIPE

Pipe Size and Weight: 5" x 19.5PPf

12"
Pipe Grade: G
6.625" OD
Range: 2
Tool Joint: 6.5/8" x 3.25" NC50

PIPE
Dimensional Data New
OD (in) 5.000 3.5" ID
Wall thickness (in) 0.362
Minimum wall (%) 95.0
ID (in) 4.276
Cross sectional area pipe body (in²) 5.275
Cross sectional area OD (in²) 19.635
Cross sectional area ID (in²) 14.360
Section modulus (in³) 5.708
Polar section modulus (in³) 11.415
5"OD
Performance Data New
Torsional strength (ft-lbs) 57,633
Tensile strength (lbs) 553,833
80% Torsional strength (ft-lbs) 46,107
31.5"

Burst Pressure capacity (psi) 13,304


Collapse capacity (psi) 12,999

TOOL JOINT
Dimensional Data New 4.276" ID
OD (in) 6.625
ID (in) 3.250
Pin tong length (in) 9
Box tong length (in) 12
Connection NC50

Performance Data New


Torsional Strength (ft-lbs) 51,447
Max Recommended Make-up Torque (ft-lbs) 31,025
Min Recommended Make-up Torque (ft-lbs) 23,268 3.250" ID
Tensile strength (lbs) 1,268,963
Tool joint/Drill pipe torsional ratio (New pipe) 0.89
9"

Drill pipe assembly with NC50 tool joint


Average length (ft) 31.5
Drift size (in) 3.125
Note: Hardbanding - Arnco 150XT / Duraband on Box
Make & Break - 3 Cycles
Internal Plastic coating: JSU3 (TK34P equivalent)
Note: Tool Joint and Pipe body values were derived as per API RP 7G and DS1 Latest edition. The above values are for refrence only. DPI LLC is not responsible
or liable for any loss or damage or injury resulting from the use of above information. All data described are the users own risk & responsibility.

You might also like