Scribd
Upload
657 views2 pages

Mig Ammo MultiCam Camouflage

The document describes the steps to paint a camouflage pattern on a figure. It begins with priming the figure black and airbrushing a light color from top to bottom to create shades. The base color of Midgrey is applied, followed by layers of yellow green, light brown, and pure green spots of varying sizes to build up the pattern. Smaller spots of brown and varied shapes are then added, overlapping previous colors. The last step applies very small dots of light sand in small groupings. Fine profiling is done by mixing a little black into the brown to define details, seams and distinguish different garments.

Uploaded by

duesen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
657 views2 pages

Mig Ammo MultiCam Camouflage

The document describes the steps to paint a camouflage pattern on a figure. It begins with priming the figure black and airbrushing a light color from top to bottom to create shades. The base color of Midgrey is applied, followed by layers of yellow green, light brown, and pure green spots of varying sizes to build up the pattern. Smaller spots of brown and varied shapes are then added, overlapping previous colors. The last step applies very small dots of light sand in small groupings. Fine profiling is done by mixing a little black into the brown to define details, seams and distinguish different garments.

Uploaded by

duesen
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1 2 3

The first step was to cover the figure with black primer The base colour is Midgrey (AMMO.F-515) which The first spots of the camouflage patern were paint-
followed by airbrushing a light color from the top to was applied with a number 2 brush, this step and ed in Yellow Green (AMMO.F-504).
create lights. colour can also be applied with an airbrush. Las primeras manchas las hacemos con Yellow Green
El primer paso es cubrir la figura con imprimación negra y El color base es el Midgrey (AMMO.F-515), aplicado con (AMMO.F-504).
después arografiar un color claro desde la parte superior un pincel del número 2, aunque también lo podemos ha-
para crear luces. cer con aerógrafo.

4 5
The next color in the camouflage patern was Light Brown (AMMO.F-531). The With Pure Green (AMMO.F-528) the third layer of spots was applied in forms sim-
spots for these first two colors are large in comparison to those to follow. ilar to branches or plant roots using a fine 2/0 brush.
Con Pure Green (AMMO.F-528) realizamos las siguientes manchas tratando de obtener
El siguiente color será el Light Brown (AMMO.F-531). Con estos dos primeros colores formas parecidas a ramas o raíces. A partir de aquí cambiaremos el pincel por uno más
estamos dibujando manchas grandes. fino del 2/0.
6 7
The colour Brown Base (AMMO.F-508) was used to draw two types of spots much The last colour in this pattern to be applied was Light Sand (AMMO.F-511).
smaller than the previous ones with small points of brown and others with var- This layer of the camouflage is comprised of small points in small groupings
ied shapes. Notice that this tone overlaps the previously applied colours in some of two or three.
areas of the pattern. El último es el Light Sand (AMMO.F-511). Lo aplicamos a base de pequeños puntos
Continuamos con el siguiente color, el Brown Base (AMMO.F-508). Dibujamos dos tipos en pequeños grupos de dos o tres.
de manchas mucho más pequeñas que las anteriores con forma de puntos y otras con
formas variadas. Este tono se solapa con los anteriores.

8
The profiling was applied as fine as was possible by adding a little Outlightning Black (AMMO-
.F-502) to the Brown Base (AMMO.F-508) to distinguish each garment and define the pockets,
details, and seams of the uniform.
El perfilado lo realizamos lo más fino posible añadiendo un poco de Outlightning Black (AMMO.F-502)
al Brown Base (AMMO.F-508), destacando los bolsillos, detalles y costuras del uniforme. Además así
conseguiremos separar las distintas prendas.

You might also like