See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/333405594

Konstruisanje podržano računarima

Book · January 2012

CITATIONS READS

4 147

3 authors:

Adil Muminovic Isad Saric

University of Sarajevo University of Sarajevo
44 PUBLICATIONS   111 CITATIONS    52 PUBLICATIONS   154 CITATIONS   

SEE PROFILE SEE PROFILE

Elmedin Mesic
University of Sarajevo
50 PUBLICATIONS   101 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Sarafix View project

All content following this page was uploaded by Isad Saric on 27 May 2019.

The user has requested enhancement of the downloaded file.

 Literatura

Literatura

Amirouche, F. Principles of Computer-Aided Design and Manufacturing. 2nd edition,

Prentice Hall, Upper Saddle River, New Jersey, 2004. ISBN 0-13-064631-8
Bedzinski, R. Experimental Methods of Investigating Bone Fractures and Implants.
Biomedical Engineering and Experimental Mechanics Division Wroclaw, University of
Technology, 2000.
Behrens, F. „General Theory and Principles of External Fixation”. Clin Orthop, 1989 (241),
pp. 15-23.
Brčić, V. i R. Čukić. Eksperimentalne metode u projektovanju konstrukcija. IRO
„Građevinska knjiga”, Beograd, 1988.
Certified hardware configurations for CATIA V5 systems. Available from:
http://www.3ds.com/support/certified-hardware/overview/, May 2011
Cozzens, R. Advanced CATIA V5 Workbook: Knowledgeware and Workbenches Release 16.
Southern Utah University, Schroff Development Corporation (SDC Publications), 2006.
ISBN 978-1-58503-321-8
Daryl, L.L. A First Course in the Finite Element Method Using Algor. PWS Publishing
Company, Boston, 1997.
Dassault Systemes. CATIA Solutions Version 5 Release 18 English Documentation, 2007.
Dassault Systemes. CATIA Web-based Learning Solutions Version 5 Release 18 Windows,
2007.
Dassault Systemes – PLM solutions, 3D CAD and simulation software. Available from:
http://www.3ds.com/home, May 2011
Đozić, Š. Komplikacije ratnih ranjavanja ekstremiteta u okruženom Sarajevu. Magistarski
rad, Medicinski fakultet Sarajevo, Sarajevo, 2001.
Fruht, M. Dizajn u proizvodnji. 2. izdanje, Naučna knjiga, Beograd, 1990.
Heim, D., P. Regazzoni and S.M. Perren. „Current Use of External Fixation in Open
Fractures”. Injury, Vol. 23, supp. 2, 1992.

213
 Literatura

Hoffmann, K. An Introduction to Measurements using Strain Gages. Hottinger Baldwin

Messetechnik GmbH, Darmstadt, Germany, 1989.
Hoffmann, K. Applying the Wheatstone Bridge Circuit. Hottinger Baldwin Messetechnik
GmbH, Darmstadt, Germany, 1987.
Hottinger Baldwin Messetechnik GmbH (HBM). Available from:
http://www.hbm.com/, November 2011
International Business Machines Corp. (IBM). Available from:
http://www.ibm.com/us/en/, May 2011
Jasinska-Choromanska, D. and I. Sadzynski. „Monitoring Technique of Bone Fracture
Healing Using External Fixators”. 39th International Conference Experimental Stress
Analysis, 2001.
Jovanović, M. Projektovanje računarom – CAD. Univerzitet u Nišu, 2010.
Karam, F. i C. Kleismit. Catia V5. S engleskog preveo Nikola Korunović, Kompjuter
biblioteka, Čačak, 2004. ISBN 86-7310-307-X
Karunakar, M.A. and M.J. Bosse. Principles of External Fixation. In: Rockwood & Green’s:
Fractures, 5th edition, 2001.
Khan, A.S. and X. Wang. Strain Measurements and Stress Analysis. Prentice Hall, Upper
Saddle River, New Jersey, 2001. ISBN 0-13-080076-7
Kljajin, M. i M. Opalić. Inženjerska grafika. Sveučilišni udžbenik, Strojarski fakultet u
Slavonskom brodu, Slavonski brod, 2010. ISBN 978-953-6048-56-4
Koo, T.K.K., E.Y.S. Chao and A.F.T. Mak. „Fixation Stiffness of Dynafix Unilateral External
Fixator in Neutral and Non-neutral Configurations”. Bio-Medical Materials and
Engineering 15, 2005, pp. 433-444.
Kovačević, D. MKE modeliranje u analizi konstrukcija. Građevinska knjiga, Beograd, 2006.
Lang, J. Maschinenbau Wirtschaftsingenieurwesen Maschinenbau. Skriptum zur Vorlesung
an der Technischen Universitat Graz, 2006.
Ljevar, A. i M. Nikolić. Industrijski dizajn. Tehnički fakultet „Mihajlo Pupin”, Zrenjanin,
2004. ISBN 86-7672-024-X
Mesic, E., A. Muminovic, N. Repcic and M. Colic. „Stiffness Analysis of the Sarafix External
Fracture Fixation System”. Technics Technologies Education Management — TTEM, Vol.
5, No. 1, 2010, pp. 60-66. ISSN 1840-1503
Mesic, E., A. Muminovic, N. Repcic and M. Colic. „Stress Analysis of the Sarafix External
Fixator Design”. Journal of Mechanics Engineering and Automation – JMEA, Vol. 1, No.
6, David Publishing Company, USA, 2011, pp. 473-480. ISSN 2159-5275 (print), ISSN
2159-5283 (online), Available from:
http://www.davidpublishing.com/journals_info.asp?jId=616
Mešić, E. „Application of Digital Techniques to Mechanical Measurements”. 3rd
International Summer Academy, University of Erlangen – Nürnberg, University of
Sarajevo, Pula, Croatia, August 28th – September 11th, 1999.
Mešić, E. Istraživanje mehaničke stabilnosti sistema za spoljašnju fiksaciju Sarafix.
Magistarski rad, Mašinski fakultet Sarajevo, Sarajevo, 2008.

214
 Literatura

Mešić, E., A. Muminović and N. Repčić. „Mechanical Stability Analysis of the External
Fixation System Sarafix”. Proceedings of the 12th International Design Conference –
DESIGN 2012, May 21st-24th, Cavtat-Dubrovnik, Croatia, 2012, pp. 1029-1038. ISSN
1848-4700
Mešić, E., A. Muminović and N. Repčić. „Structural Analysis and Experimental Testing of
External Fixator System Under Axial Compression”. Proceedings of the 13th International
Research/Expert Conference „Trends in the Development of Machinery and Associated
Technology – TMT 2009”, Hammamet, Tunisia, 2009, pp. 497-500. ISSN 1840-4944
Moroz, T.K., J.B. Finlay, C.H. Rorabeck and R.B. Bourne „Stability of the Original Hoffmann
and AO Tubular External Fixation Devices”. Medical & Biological Engineering &
Computing, 26, May 1988, pp. 271-276.
Muminović, A. „Geometric Modelling and Engineering Analysis”. Proceedings of the 10th
International Research/Expert Conference „Trends in the Development of Machinery and
Associated Technology – TMT 2006”, Lloret de Mar, Spain, 2006, pp. 745-748. ISSN
1840-4944
Muminović, A. Prenosnici snage i kretanja. Predavanja, Mašinski fakultet Sarajevo, Sarajevo,
2011.
Muminović, A. Projektovanje pomoću računara. Predavanja, Mašinski fakultet Sarajevo,
Sarajevo, 2011.
Muminović, A., E. Mešić and N. Repčić. „Structural Analysis of Mechanical Characteristics
of External Fixation Systems”. Proceedings of the 6th International Scientific Conference
on Production Engineering „Development and Modernization of Production – RIM 2007”,
Plitvice Lakes, Croatia, October 24th-26th, 2007, pp. 111-116. ISBN 978-9958-9262-1-1
Muminović, A., I. Šarić and N. Repčić. „Stress Analysis of Model Device for Torsion”.
Proceedings of the 11th International Research/Expert Conference „Trends in the
Development of Machinery and Associated Technology – TMT 2007”, Hammamet,
Tunisia, September 5th-9th, 2007, pp. 731-734. ISSN 1840-4944
Muminović, A., M. Čolić and M. Gutić. „Solid modeling and stress analysis of the lower
sheave assembly”. Proceedings of the 13th International Research/Expert Conference
„Trends in the Development of Machinery and Associated Technology – TMT 2009”,
Hammamet, Tunisia, 2009, pp. 589-592. ISSN 1840-4944
Muminović, A., M. Čolić and M.M. Čolić. „Stress and Deformation States Analysis of
Vertical Sheet Metals on Box-Shaped Girder”. Proceedings of the 15th International
Research/Expert Conference „Trends in the Development of Machinery and Associated
Technology – TMT 2011”, Prague, Czech Republic, September 12th-18th, 2011, pp. 561-
564. ISSN 1840-4944
Ognjanović, M. Metodika konstruisanja mašina. Mašinski fakultet Beograd, Beograd, 1990.
ISBN 86-7083-137-6
Ognjanović, M. Razvoj i dizajn mašina. Mašinski fakultet Beograd, Beograd, 2007. ISBN
978-86-7083-603-7
Opalić, M. Prijenosnici snage i gibanja. Sveučilište u Zagrebu, 1998.
Opalić, M., M. Kljajin i S. Sebastijanović. Tehničko crtanje. Sveučilišni udžbenik, Zagreb/
Slavonski Brod, 2002.

215
 Literatura

Radke, H., D.N. Aron, A. Applewhite and G. Zhang. „Biomechanical Analysis of Unilateral
External Skeletal Fixators Combined with IM-Pin and without IM-Pin Using Finite-
Element Method”. Veterinary Surgery 35, 2006, pp. 15-23.
Repčić, N. AutoCAD 2000: Primjena računara u konstruisanju. Mašinski fakultet Sarajevo,
Sarajevo, 2001.
Repčić, N. CAD metode: Konstruisanje podržano računarima. Mašinski fakultet Sarajevo,
Sarajevo, 1996.
Repčić, N. Prenosnici snage i kretanja. Mašinski fakultet Sarajevo, Sarajevo, 1999.
Repčić, N. Tehnička dokumentacija I. Mašinski fakultet Sarajevo, Sarajevo, 2004.
Repčić, N. Tehnička dokumentacija II. Mašinski fakultet Sarajevo, Sarajevo, 2004.
Repčić, N., A. Muminović, I. Šarić i E. Mešić. Zbirka zadataka iz mašinskih elemenata.
Univerzitetsko nastavno-naučno izdanje, Mašinski fakultet Sarajevo, Sarajevo, 2007.
ISBN 978-9958-601-16-3
Repčić, N., A. Zuko, M. Čolić i Z. Pita. Osnovi konstruisanja. Svjetlost, Sarajevo, 1998. ISBN
9958-10-023-1 (ISBN 9958-11-033-4)
Repčić, N., A. Zuko, Z. Pita i M. Čolić. Mašinski elementi II dio. Svjetlost, Sarajevo, 1998.
ISBN 9958-10-157-7 (ISBN 9958-11-075-X)
Repčić, N. i A. Muminović. Mašinski elementi I. Mašinski fakultet Sarajevo, Sarajevo, 2004.
Repčić, N. i A. Muminović. Mašinski elementi II. Mašinski fakultet Sarajevo, Sarajevo, 2004.
Repčić, N. i E. Mešić. „Optimizacija motornih maziva”. Zbornik 4. međunarodne naučne
konferencije o proizvodnom inženjerstvu – RIM 2003, Bihać, 25-27 septembar, 2003, pp.
247-252. ISBN 9958-624-16-8
Repčić, N. i I. Šarić. AutoCAD: Izrada tehničkih crteža. Mašinski fakultet Sarajevo, Sarajevo,
2006.
Repčić, N., M. Čolić, Z. Pita, K. Stanković i A. Zuko. Mašinski elementi I dio. Svjetlost,
Sarajevo, 2001. ISBN 9958-10-306-0
Repčić, N., N. Pervan and. I. Šarić. „Application of Harmonic Drive Gears in Machine
Tools”. Proceedings of the 15th International Research/Expert Conference „Trends in the
Development of Machinery and Associated Technology – TMT 2011”, Prague, Czech
Republic, September 12th-18th, 2011. pp. 765-768. ISSN 1840-4944
Repčić, N., N. Pervan, V. Avdić i A.J. Muminović. AutoCAD 2010. Mašinski fakultet
Sarajevo, Sarajevo, 2010.
Repčić, N., V. Avdić and N. Pervan. „New Guidelines in Creating PLM and PDM Software”.
Proceedings of the 14th International Research/Expert Conference „Trends in the
Development of Machinery and Associated Technology – TMT 2010”, Mediterranean
Cruise, September 11th-18th, 2010, pp. 261-264. ISSN 1840-4944
Sekulović, M. Metod konačnih elemenata. 2. izdanje, IRO „Građevinska knjiga”, Beograd,
1988.
Shigley, J.E., C.R. Mischke and R.G. Budynas. Mechanical Engineering Design. 7th edition,
McGraw-Hill, New York, 2004. ISBN 007-252036-1
SKF Systems A/S. Available from:

216
 Literatura

http://www.sfk.com, July 2012

Spotts, M.F., T.E. Shoup and L.E. Hornberger. Design of Machine Elements. 8th edition,
Prentice Hall, Upper Saddle River, New Jersey, 2004. ISBN 0-13-126955-0
Spur, G. und F.L. Krause. CAD-Technik: Lehr- und Arbeitsbuch für die Rechnerunterstützung
in Konstruktion und Arbeitsplanung. Carl Hanser Verlag München Wien, Germany, 1984.
ISBN 3-446-13897-8
Saric, I., N. Repcic and A. Muminovic. „3D Geometric parameter modelling of belt
transmissions and transmissions gear”. Technics Technologies Education Management –
TTEM, Vol. 4, No. 2, 2009. pp. 181-188. ISSN 1840-1503
Saric, I., N. Repcic and A. Muminovic. Mechanical Transmissions Parameter Modelling. In:
Mechanical Engineering, Edited by Murat Gokcek, InTech, 2012. ISBN 978-953-51-0505-
3, Available from:
http://www.intechopen.com/books/mechanical-engineering/mechanical-transmissions-
parameter-modelling
Šarić, I. Geometrijsko i parametarsko modeliranje naprednim CAD aplikacijama. Magistarski
rad, Mašinski fakultet Sarajevo, Sarajevo, 2009.
Šarić, I., A. Muminović and N. Repčić. „Implementation of CAD/CAM/CAE Systems”.
Proceedings of the 7th International Scientific Conference on Production Engineering
„Development and Modernization of Production – RIM 2009”, Cairo, Egypt, September
26th – October 3rd, 2009, pp. 51-52. ISBN 978-9958-624-29-2
Šarić, I. and N. Repčić. Implementation of CAD/CAM/CAE Systems and New Methods for
Design. International Scientific-Expert Symposium „Modern Methods for Design in Wood
Industry”, Department for Mechanical Technology of Wood, Faculty of Mechanical
Engineering Sarajevo, Sarajevo, November 29th, 2008.
Šarić, I., N. Repčić and A. Muminović. „Parameter Modelling of Gears”. Proceedings of the
14th International Research/Expert Conference „Trends in the Development of Machinery
and Associated Technology – TMT 2010”, Mediterranean Cruise, September 11th-18th,
2010, pp. 557-560. ISSN 1840-4944
University of Cambridge. Available from:
http://www.cam.ac.uk, July 2012
Zamani, N.G. CATIA V5 FEA Tutorials Release 19. University of Windsor, Schroff
Development Corporation (SDC Publication), 2010. ISBN 978-1-58503-586-1
Zamani, N.G. i J.M. Weaver. Catia V5: Dizajn mehanizama i njihova animacija. S engleskog
preveo Dragan Žujović, Kompjuter biblioteka, Čačak, 2007. ISBN 978-86-7310-381-5
Zienkiewicz, O.C. and R.L. Taylor. The Finite Element Method – Volume 2: Solid Mechanics.
5th edition, Butterworth-Heinemann, Oxford, 2000. ISBN 0-7506-5055
Zienkiewicz, O.C., R.L. Taylor and J.Z. Zhu. The Finite Element Method: Its Basis and
Fundamentals. 6th edition, Butterworth-Heinemann, Oxford, 2005. ISBN 0-7506-6320-0

217

View publication stats