1

FTTx SOLUTION ORDERING GUIDE

Chapter One: Fiber in the Building Solutions

OFS FTTx SOLUTIONS

VISIT US AT WWW.OFSOPTICS.COM
CHAPTER ONE:
Fiber in the Building Solutions

Fiber to the Home and Business Solutions for both indoor and
deployment is accelerating globally outdoor deployment offer flexibility
to support increasing internet to use the best available pathways
speeds of up to 1 Gigabit per for each building. The solution
second, and 10 Gigabit speeds are building blocks include a wide range
already available in some regions. of terminals, splitters, point-of-entry
Service providers are responding by modules, riser cables, attic and wall
installing optical fiber both to and fish fiber, hallway fiber and complete
deep inside buildings to the living indoor living unit fiber kits. This
unit. The Solutions in this guide can portfolio allows service providers
help reduce both first cost and life to select the best solution for each
cycle cost of fiber deployments to building, and OFS can help design
residential and business customers building specific solutions and bills
inside homes and buildings. of material as a value added service.

Solutions for both Greenfield BENEFITS

installation during building OFS FTTx solutions help to
construction and Brownfield revolutionize the speed of installing
installation in existing buildings are fibers; enhance the customer
included. Scalable and optimized experience; minimize disruption;
to fit a broad range of building reduce labor costs; increase
structures, these solutions offer subscriber take rates; enable faster
faster, reliable installation through time to revenue for service providers;
innovative labor saving technologies, and get Gigabit and higher speeds
using less space than conventional faster to subscribers.
approaches.
 Building Pain Points and Solutions

CHALLENGES AND SOLUTIONS

• Time to revenue: Fast and easy to install pre- • Disruptive/noisy to tenants: Optical solutions that
terminated solutions can speed installation and are virtually invisible can be installed quickly and
reduce labor costs. quietly, and preserve the building decor.

• No pathways, requiring labor intensive cut and • Service disruptions and lost subscribers: Full
patch: Compact surface mounted fiber solutions. solution of fiber, cable and connections from one
company, designed to work together. Factory
• Limited closet space: Smaller enclosures tested to Tier 1 standards.
can enable installation of multiple operator
connections in a small telecommunications closet. • Multiple building types: Solutions to fit each
building type.
• Multiple boxes for splicing and splitter
connections: Single box pre-terminated solutions
PRE-TERMINATED vs. FIELD TERMINATED
can require less space and enable faster
Pre-terminated solutions are increasingly used to
provisioning.
install fiber in MDU buildings to save time and money
• No duct space: Compact surface mounted fiber in higher labor cost regions. Pre-terminated products
solutions either inside or on the outside of the with built-in slack management are preferred so
building do not require duct. installers can neatly manage excess slack, and use a
single component to support multiple deployment
• Shared infrastructure: Compact cables can support lengths. Nevertheless, field terminated solutions can
multiple service providers in telecommunication complement pre-terminated parts of the indoor or
pathways. outdoor network and, for low labor cost markets, field
terminated solutions may be preferred. OFS offers
• Fiber bends around many corners: Bend
both pre-terminated and field terminated solutions to
insensitive fiber specified to support bend radius
fit the needs of each service provider.
as low as 2.5 mm.

WWW.OFSOPTICS.COM | 3
 Fiber Specifications Optimized to the Application

Installing fiber in buildings and homes often requires conforming the fiber around sharp corners. EZ-
Bend® Single-mode Fiber offers outstanding bend performance down to a 2.5 mm radius for the most
challenging in-residence and MDU applications. Compatible with the installed base of conventional
G.652.D single-mode fibers, the fiber meets and exceeds ITU-T G.657.B3 recommendations. EZ-Bend
fiber uses OFS’ patented groundbreaking EZ-Bend Optical Technology to provide three times’ lower
loss at tight bends than competing G.657.B3 products.

ACCESS (OUTSIDE PLANT) ACCESS (DROP AND IN BUILDING)

AllWave®+ Optical Fiber AllWave+ Optical Fiber
AllWave FLEX+ Optical Fiber AllWave FLEX+ Enhanced Optical Fiber
EZ-Bend Optical Fiber EZ-Bend Optical Fiber

WHY CHOOSE EZ-BEND FIBER?

Because you can staple, coil, tie and corner it.

STAPLE COIL TIE CORNER

4 | WWW.OFSOPTICS.COM
 In Building Architecture:
Centralized, Distributed and Distributed Cascaded Splitting

Infrastructure Optimized
to Fit the Building.

LE
STY
E N
RD
GA

E
RIS
W
LO

R ISE
HIGH

As FTTx deployment accelerates globally to meet Building types include duplexes, garden style, low
increasing bandwidth needs, service providers must rise (less than 10 floors), mid rise (10 to 15 floors),
install optical fiber both to and inside the building high rise (16 to 40 floors) and skyscrapers (40 floors
for business and residential subscribers. To provide and above). However, while structures vary, building
Gigabit services, providers must place optical cables owners, residents and service providers inevitably
in building risers and ducts, install optical fiber in have common demands: quick service turn-up and
hallways, and then take this fiber deep into the units, the fast, non-disruptive installation of solutions that
connecting to an indoor Optical Network Terminal blend into the existing decor.
(ONT). How can providers accomplish this in buildings
that can vary widely in design, materials and available
pathways?

OFS FTTx SOLUTION GUIDE | 5

PON Overview and Splitter Architectures

A typical PON network consists of the Optical Line

Terminal (OLT) in a central office, MDF or cabinet,
connected by a feeder cable to passive optical InvisiLight®
splitters, and then to distribution and drop cables MDU & ILU Solution
downstream in the network that connect to an Optical
Network Terminal (ONT). The splitters typically have
a single fiber from the OLT that is optically split to
produce 4, 8, 16, or 32 output fibers, each connected

Riser Cable
SlimBox®
to an ONT downstream. The bandwidth of the single 12-Fiber Internal
OLT fiber is shared by the multiple output fibers in a Adapter Module
similar fashion as the bandwidth of Ethernet switch
users is shared by the uplink from the switch to the
network.
SlimBox 64-Fiber
PON systems are available supporting up to 10 Enclosure with
Gigabits per second (Gbps) today, and systems Optional Splitters
supporting 25, 50, 100, and 200 Gbps are in
development. Current PON systems and those in
development use wavelengths that are sensitive to
fiber bending. OFS recommends EZ-Bend(r) cables to
Optical Line Terminal
avoid network downtime resulting from fiber bending
that may in building installations
Example: Cascaded Splitter Architecture
OFS Fiber in the Building Solutions can be configured
to support current and future PON systems, using the
splitter architecture optimized for each customer’s
needs.

Centralized Splitting Architectures

Optical
Line
Centralized architectures help lower total costs when Terminal
High Fiber
Count Cable
relatively low take rates are expected. They can help
defer capital cost by allowing for incremental OLT
Fiber Distribution
Cabinet with Multiple Low Fiber
Splitters Count Cable

and splitter additions as subscriber counts increase.

Centralized architectures co-locate a number of
splitters in a central location such as a cabinet, MDF, ADVANTAGES
or CO. • Electronics costs scale with take rate due to
efficient utilization of OLT ports
In a centralized architecture, there is typically no
splitter inside the small to medium sized buildings. • Centralized management of customer connections
An outdoor or indoor box is used to receive the • Easier transition to higher speeds with some types
outside plant cable from the central office or the of PON systems
Fiber Distribution Hub (FDH) which contains the
splitters. The basement box is used as a transition DISADVANTAGES
point between outdoor and indoor or indoor/outdoor • Higher cost in cable and cabling infrastructure
cables. For larger buildings the FDH may be placed
• Larger network elements in the outside plant
inside the building.

6 | WWW.OFSOPTICS.COM
Distributed Splitting
Optical
Line

A distributed splitting architecture is cost optimized

Terminal

when subscription rates are expected to be medium

to high, and has the added benefit of eliminating the
need to find space for placing cabinets. ADVANTAGES
Splitters are “distributed” throughout the network • Less fiber, cables and splicing than the centralized
and placed in closures or pedestals in the field or in option; no cabinets required
buildings. At each splitter location, there will typically • Quicker to deploy
be one or at most two splitters.
DISADVANTAGES
This type of architecture typically uses lower fiber
count cables, requires less splicing, and results in • Less network flexibility for upgrades
lower plant costs, but higher electronics costs. • More challenging to monitor and trouble-shoot
the network
This architecture may use splitters in the basement of
a building. Customers can be easily connected in the • Less efficient OLT port utilization than centralized
basement box using the customer connection ports. splitting

Distributed Cascaded Splitting

Distributed cascaded splitting, also called double

star, is a form of distributed splitting with the splitters
“cascaded” in the network. For example, a typical Horizontal Cable
distributed split architecture may use a 1X32 splitter
in a closure. The cascaded version may consist of a
1X8 splitter at one location feeding four 1X4 splitters
downstream at different locations, to achieve a 1X32
split.
Riser Cable

With this architecture the upstream splitter may be

located in the building basement and the downstream
splitter on each floor.

ADVANTAGES Indoor Box with

• Reduced cable size, lower fiber counts, and less Splitter
splicing
• Lowest cost in outside plant vs. Centralized or
Distributed
Optical Line Terminal
DISADVANTAGES
in MDF or CO
• Difficult to trouble shoot
• Most complex network management
• Higher loss and shorter reach than single stage
splitting

OFS FTTx SOLUTION GUIDE | 7

 Brownfield
Outdoor Facade Solution

Outdoor Facade Solutions are InvisiLight Facade Solution for Exposed Hallways or Breezeways
used when property owners
want to preserve the decor of the Basement Terminal SlimBox® Indoor/Outdoor 12F, 24F, or SlimBox
building exterior when: a) installing Indoor 64F
cables on the facade and then Floor Terminal SlimBox Indoor/Outdoor 12F or 24F
transitioning to an indoor solution,
b) pursuing an all outdoor solution Hallway Indoor/Outdoor Compact Outdoor Point of
on the façade to connect each Entry (POE) Module
living unit when it is not possible EZ-Bend® Indoor/Outdoor 12F or 24F Cable
to install fiber solutions indoors,
or c) using a combination of 900 µm Pigtails for Splicing (Optional)
indoor and outdoor solutions for InvisiLight Facade Solution for Outdoor Installations
hallways that are exposed to the
outdoor elements (breezeways). Facade Terminals SlimBox 24F and 2F or 4F (Outdoor)
Therefore, several solutions are Facade Cable EZ-Bend Indoor/Outdoor 12F or 24F Cable
required to address these different
approaches. Drop Cable EZ-Bend 1F 3.0 mm or 4.8 mm Cable

A B C

Facade Cabling Transition Facade Cabling Transition Outdoor Cabling for Exposed
to Indoor Cabling Solutions to Indoor Living Unit Hallways (Breezeway)
The compact EZ-Bend Indoor/Outdoor The compact EZ-Bend Indoor/Outdoor 12F The compact EZ-Bend Indoor/Outdoor 12F
12F or 24F cable is placed vertically on or 24F cable is placed horizontally on the or 24F cable is placed horizontally on the
the exterior wall of the building from an exterior wall of the building from an outdoor interior wall of exposed building hallways
outdoor wall mount box to an indoor wall mount box to an outdoor SlimBox (breezeways) using the same installation
SlimBox. The indoor SlimBox 24F can be 4F or 8F (higher fiber count terminals technique as the indoor InvisiLight MDU
factory configured with SCA adapters or are available). EZ-Bend® 3mm or 4.8mm Solution. Similarly, the cable slack is stored
fanouts for a pre-terminated solution, or jumpers are used for the path to each living in an outdoor UV-rated version of the
for fusion splicing. EZ-Bend 3mm or 4.8mm unit. Pre-terminated EZ-Bend Jumpers are Compact Point of Entry module. The 80x80
jumpers are used for the path to each living recommended for faster installation, or a or EZ-Connect InvisiLight modules are used
unit. Pre-terminated EZ-Bend Jumpers are mechanical connector may be used for field as a “fiber extension” to any location in the
recommended for faster installation, or a termination in the SlimBox® Wall Plate. The living unit.
mechanical connector may be used for field 80x80 or EZ-Connect InvisiLight modules
termination in the SlimBox® Wall Plate. The can be used as a “fiber extension” to any
80x80 or EZ-Connect InvisiLight modules location in the living unit. The use of 600
can be used as a “fiber extension” to any µm fiber can make this solution even more
location in the living unit. Alternatively, “invisible.” 600 µm EZ-Bend fiber offers the
instead of EZ-Bend jumpers, the InvisiLight same bending performance and is as easy
MDU solution may be placed in the hallway to installer as 900 µm fiber in a smaller,
to the living units (not shown). harder-to-see form.
ROOF IN TH E L IV ING U NIT IN THE BREEZEWAY
SlimBox Wall Plate SCA
M-Pack Indoor/Outdoor 3.0 mm 12F or 3.8
or EZ-Connect Module mm 24F Cable
SCA InvisiLight
ILU Solutions
EZ-Bend 1F 3.0mm or
4.8mm jumper or cord SCA
F LOOR( S)

SCA Compact Outdoor

F LO O R OR AT TI C

SlimBox 12-Fiber Point of Entry

EZ-Bend 1F 3.0 mm or 4.8 EZ-Bend SCA Terminal
SlimBox Wall Plate mm Jumper or Cord
SCA
3.0mm Jumper
or EZ-Connect Module
B Riser Cable
ACCUMAX®
or M-Pack®
8/12F

SlimBox 24-Fiber SCA

InvisiLight 900 µm Fiber
EZ-Bend® 2.0
Terminal mm or 3.0mm
SCA
OU TS I DE WA L L
B A S EM E N T /

SlimBox 64-Fiber
MPO or SCA M-Pack Indoor/ Terminal
BA SE M E NT

Outdoor 3.0 mm SCA

M-Pack Indoor/Outdoor 12F or 3.8 mm
3.0 mm 12F or 3.8 mm 24F Cables SlimBox 2- or 4-Fiber
24F Cables EZ-Bend Outdoor Enclosure
3.0mm Jumper SlimBox Wall Mount Outdoor
12F or 24F Terminal
OU TS I DE WA L L
B A S E M EN T/

MPO or SCA

8 | WWW.OFSOPTICS.COM
 Brownfield Outdoor
EZ-Bend® Bundled Assemblies

SOLUTION DESIGN
Bundles of 5, 6, or up to 12 indoor/outdoor EZ-Bend®
jumpers are fixed against the outside wall. The bundle
is connected to an outdoor box on the roof, in the
basement, or at ground level of the building. Each cord
of the bundle can be passed through the wall to connect
to the subscriber’s ONT.

FEATURES AND BENEFITS

Optimized for buildings with
no pathway for fiber inside
Maintains outside appearance of the building
Quick installation (~24 units in 2 days)
Good alternative to indoor solutions
Available in black or white to blend with the decor
See Page 25 for
Product Details Often used for heritage or very old buildings
with limited duct space

OFS FTTx SOLUTION GUIDE | 9

 Greenfield
Pre-Terminated Solution

TELECOMMUNICATION ROOM
• Compact basement box for a progressive customer
activation;
• The basement box (SlimBox® 64F Terminal) allows fusion
splices for the outside plant cable;
• Ideal for buildings with low penetration rates: One splitter
can be installed and the management of the customers is
done through the SCA ports. A parking area permits easy 5 7
connection of new customers;
• Several boxes can be connected for modular expansion. 3 6
4
Connections between multiple SlimBoxes are possible
through access openings between them.
2
RISER BACKBONE
• SCA pre-terminated cables for quick plug and play
installation: 1

• EZ-Bend® patch cords directly from the office or living unit

may be used for small buildings.

HORIZONTAL DEPLOYMENT
• Direct deployment from the telecommunication closet to
the living unit or office;
• Ideal for Greenfield installation
• The EZ-Bend jumper connects the ONT to the SlimBox® Wall
Plate;

INSIDE THE LIVING UNIT OR OFFICE

• EZ-Bend Jumper connects the SlimBox Wall Plate to the
ONT
IN T HE HAL LWAY IN THE L IVIN G U N IT OR OF F ICE

SCA SCA
EZ-Bend 3.0mm
Patch Cords
SlimBox
Wall Plate
FLOO R (S)

SCA
SCA
SCA
B Riser Cable

SlimBox 12-Fiber
ACCUMAX®
or M-Pack®

Terminal
8/12F

EZ-Bend
3.0mm Jumper

SlimBox 64-Fiber
Terminal
BASE MEN T

SCA

10 | WWW.OFSOPTICS.COM
 Greenfield
Fusion Spliced or Field-Terminated Solution

TELECOMMUNICATION ROOM
• Compact basement box for a progressive customer activation
(parking up to 48 connectors in the SlimBox 64 Terminal);
• The basement box (SlimBox® 64F Terminal) allows fusion
splices for the outside plant cable and the internal cables (up
to 96 fusion splices - 8 splice trays with 12 splices in each
one);
• Ideal for buildings with low penetration rate: One splitter can
be installed with management of the customers done through 8
the SCA ports. A parking area permits easy connection of
new customers; 4 7
• Several boxes can be connected for modular expansion.
3
Connections between SlimBoxes are possible through access 6
openings between them. 5

2
RISER BACKBONE
1
• ACCUMAX® cables may be used for a quick and easy
installation:
• SCA pre-terminated pigtails or EZ!Fuse connectors used for
fusion splicing inside the basement and floor boxes;

HORIZONTAL DEPLOYMENT
• Direct deployment from the telecommunication closet to the
Apartment unit through EZ-Bend cable (ruggedized 3.0 or
4.8 mm);
• The horizontal cable is fusion spliced or field terminated
with an EZ!Fuse connector in the SlimBox 12 Terminal (floor
distribution box) and in the SlimBox Wall Plate (inside the
living unit);
IN T HE HAL LWAY IN THE L IVIN G U N IT OR OF F ICE

INSIDE THE LIVING UNIT ORSCA

OFFICE SCA
• The EZ!Fuse™ Splice-On Connector
3.0mm can be used
EZ-Bend Cord to terminate
the EZ-Bend Jumper or a pre-terminated EZ-Bend Jumper
can be used; SlimBox EZ!Fuse™ Splice
FLOO R (S)

Wall Plate On Connector

SlimBox 12-Fiber SCA
SCA Terminal SCA
B Riser Cable
ACCUMAX®
or M-Pack®
8/12F

1F EZ-Bend
3.0mm Jumper
SlimBox 64-Fiber
Terminal
BASEM ENT

SCA

OFS FTTx SOLUTION GUIDE | 11

 Brownfield
Pre-Terminated Solution

TELECOMMUNICATION ROOM
• Compact basement box for progressive customer activation;
• The basement box (SlimBox® 64F Terminal) allows fusion
splices to the outside plant cable;
• Ideal for buildings with low penetration rate: One splitter can
be installed with management of the customers done through
the SCA ports. A parking area permits easy connection of
new customers;
• Boxes can be added for modular expansion.
• Connections between SlimBox units are easy using jumpers
through multiple ports designed into the box.
9 8
7
RISER BACKBONE
5
• SCA pre-terminated cables for quick plug and play
installation:
• The InvisiLight® 2.0mm 12 fiber multifiber cord can be pulled
up the riser directly from the basement box and down 6
hallways in small or garden style buildings. 4
3
HORIZONTAL DEPLOYMENT
• The InvisiLight MDU Point of Entry Module offers a discrete
solution using field termination inside the module; 2
• Virtually invisible installation using the InvisiLight 12F pre-
terminated 2.0mm cord 1

INSIDE THE LIVING UNIT OR OFFICE

• InvisiLight ILU Solution is complementary and connects to
the InvisiLight MDU installation;
• InvisiLight ILU Solution is installed with the same tools and
IN T HE HA L LWAY IN THE L IVIN G U N IT OR O FFICE
procedure as the InvisiLight MDU Solution
InvisiLight 4F/8F/12F/16F SlimBox
2.0mm cord Wall Plate
SCA
FLOOR (S)

SCA Point of Entry

SlimBox 12-Fiber SCA SCA
SCA Terminal SCA
B Riser Cable
ACCUMAX®
or M-Pack®
8/12F

InvisiLight 900 µm Fiber

EZ-Bend
3.0mm Jumper

SlimBox 64-Fiber
Terminal
BASE MEN T

SCA

12 | WWW.OFSOPTICS.COM
 Brownfield
Pre-Terminated Solution with Spooled Slack Management

TELECOMMUNICATION ROOM
• Compact basement box for large scale customer activation
• The basement box (SlimBox® 24F) allows fusion splices for
the outside plant cable;
• Ideal for buildings with high penetration rate
2
RISER BACKBONE 10 9
• Built-in slack management with the V-Linx™ solution: 8
• Reduce inventory and lead time (fewer components); 6
4
• Faster installation
• Scalable to multiple building sizes
7
5
HORIZONTAL DEPLOYMENT 2
• The InvisiLight® MDU Point of Entry Module offers a discrete 3
solution using field termination inside the module;
• Virtually invisible installation using the InvisiLight 12F pre-
terminated 2.0mm cord

INSIDE THE LIVING UNIT OR OFFICE

1
• InvisiLight ILU Solution is complementary and connects to
the InvisiLight MDU installation;
• InvisiLight ILU Solution is installed with the same tools and
procedure as the InvisiLight MDU Solution

IN T HE HA L LWAY IN THE L IVIN G U N IT OR O FFICE

InvisiLight 4F/8F/12F/16F
2.0mm cord
SCA InvisiLight
ILU Solutions
V-Linx
MPO
FLO OR( S)

Terminal SCA Point of Entry

64F AccuFlex™
Ribbon Cable

SCA

V-Linx InvisiLight 900 µm Fiber

EZ-Bend® 2.0
Combiner mm or 3.0mm
MPO

MPO
BASE MENT

SlimBox 24-Fiber
Terminal

OFS FTTx SOLUTION GUIDE | 13

EZ-Bend® Ruggedized Cables
and Cable Assemblies
EZ-Bend Jumpers

EZ-Bend Ruggedized Jumpers utilize best in class

EZ-Bend 2.5 mm bend radius rated fiber, in a robust
cord than can withstand sharp corners and up to 100
lbs (45 KG) of pulling tension. With factory tuned and
tested termination, and no bend loss issues, they help
save time and money on installation. Their innovative
design can be stapled around sharp corners and
moldings, and provides an ideal solution for MDU and
in-home wiring applications.

FEATURES AND BENEFITS

• Available in 4.8mm diameter cordage as indoor/ • Faster, easier installation: no extra steps to install
outdoor, indoor/outdoor toneable riser, plenum, bend limiters, conduits, or raceways. Class leading
or low-smoke, zero-halogen construction 2.5mm bend radius SM fiber.
• Available in 3.0mm diameter cordage as indoor/ • Better bending than competing products: both
outdoor, riser construction the EZ-Bend 4.8mm and 3.0mm cable can be
stapled around sharp corners

nnn Feet

Example Ordering Codes

Code Description

JR5DK001SCASCAnnnF EZ-Bend 4.8 mm Riser Indoor/Outdoor Single Fiber SCA to SCA

JR5DK001SCAUNCnnnF EZ-Bend 4.8 mm Riser Indoor/Outdoor Single Fiber SCA to Unconnectorized

JH5DK001SCAUNCnnnF EZ-Bend 4.8 mm Low Hallogen Black Indoor/Outdoor Black Single Fiber SCA to
Unconnectorized
JR4DW001SCASCAnnnF EZ-Bend 4.8 mm Riser White Single Fiber SCA to SCA

JR4DW001SCAUNCnnnF EZ-Bend 4.8 mm Riser White Single Fiber SCA to Unconnectorized

JP4DW001SCAUNCnnnF EZ-Bend 4.8 mm Plenum White Single Fiber SCA to Unconnectorized

JH4DW001SCAUNCnnnF EZ-Bend 4.8 mm Low Halogen White Single Fiber SCA to Unconnectorized

JRVDW001SCASCAnnnF EZ-Bend 3.0 mm Ruggedized Riser White Single Fiber SCA to SCA

JRVDW001SCAUNCnnnF EZ-Bend 3.0 mm Ruggedized Riser White Single Fiber SCA to Unconnectorized

* NOTES: nnn = footage (Length in boxes up to 1,500 feet)

Length of jumper specified in feet (F) or meters (M)

Standard Packaging

Lengths up to 150’ Coiled in bag

Lengths greater than 150’ Compact spool

14 | WWW.OFSOPTICS.COM
 EZ-Bend® Multifiber Drop Bundles

FEATURES AND BENEFITS FEED UP FEED DOWN

To Anchor
FDT
• Same best in class performance and benefits as EZ-
Strength Member
Bend Cables and Assemblies
To Anchor
• Additional time savings by pulling 5, 6 or 12
assemblies at one time

10’4”

10’4”
• Ruggedized 4.8mm Indoor/Outdoor cable with EZ-
Bend Ultra-Bend Insensitive Fiber
• Bundles of up to 12 cables are placed on the outside

10’4”

10’4”
of the building with coils located at each living unit
• The network end of the bundle is spliced at the
Fiber Distribution Terminal (FDT)

10’4”

10’4”
• To activate service, the connectorized end is pushed
into the living and plugged into the ONT

10’4”

10’4”
10’4”

10’4”
50’, 100’, 200’
FDT

To Anchor To Anchor

Ordering Information
Part Number Product Code Material Description
301016762 Drop Bundle 6 Up Blk 4.8 EZ-Bend I/O 100 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
06 cables - Feed up method - 100 ft
301016770 Drop Bundle 6 Up Blk 4.8 EZ-Bend I/O 150 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
06 cables - Feed up method - 150 ft
301016804 Drop Bundle 6 Down Blk 4.8 EZ-Bend I/O 100 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
06 cables - Feed down method - 100 ft
301016812 Drop Bundle 6 Down Blk 4.8 EZ-Bend I/O 150 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
06 cables - Feed down method - 150 ft
301030169 Drop Bundle 12 Up 4.8 Blk 4.8 EZ-Bend I/O 100 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
12 cables - Feed up method - 100 ft
301030177 Drop Bundle 12 Up 4.8 Blk EZ-Bend I/O 150 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
12 cables - Feed up method - 150 ft
301030201 Drop Bundle 12 Down 4.8 Blk EZ-Bend I/O 100 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
12 cables - Feed down method - 100 ft
301030219 Drop Bundle 12 Down 4.8 Blk EZ-Bend I/O 150 ft EZ-Bend 4.8mm Riser Indoor/Outdoor Cable
12 cables - Feed down method - 150 ft

OFS FTTx SOLUTION GUIDE | 15

 EZ-Bend® Cable
(Reel-in-a-Box)

FEATURES AND BENEFITS

• EZ-Bend cables can be easily pulled out of the • Supports multiple simultaneous cable pulls
box and placed • Direct cable access through the box top for easy
• Easier to transport and use than standard fiber management of excess cable
reel packages • Outdoor version for underground applications
• Helps save time and money on installation,
equipment, setup and storage PRODUCT DESCRIPTION
• Provides greater cable protection The OFS Reel-in-a-Box Cabling Solution offers
• Design prevents cable from spinning over the reel installers lightweight, easy-to-use cable packaging for
flange true “out of the box” disbursement of fiber optic cable.
This readily recyclable cable package helps save time
• Helps eliminate cable twisting and tangling
and money on set up and installation.
• Enables fast cable placement and pulling

Ordering Information

Part Number Product Code Material Description

PR1-001-346-0273 IR30-001C-DRK-4-WPVC-RIB-1500FT EZ-Bend 3.0mm Riser Cable - Black - RIB - 1500FT

PR1-001-347-0273 IR30-001C-DRW-4-WPVC-RIB-1500FT EZ-Bend 3.0mm Riser Cable - White - RIB - 1500FT

PR1-001-229-0273 IR30-001C-DRK-4-WPVC-RIB-4500FT EZ-Bend 3.0mm Riser Cable - Black - RIB - 4500FT

PR1-001-579-0273 IR30-001C-DRW-4-WPVC-RIB-4500FT EZ-Bend 3.0mm Riser Cable - White - RIB - 4500FT

PR1-001-348-0273 IO48-001D-DRK-4-WPVC-RIB-1500FT EZ-Bend 4.8mm Riser and Indoor/Outdoor Cable -

Black - RIB - 1500FT

PR1-001-349-0273 IO48-001D-DRW-4-WPVC-RIB-1500FT EZ-Bend 4.8mm Riser and Indoor/Outdoor Cable -

White - RIB - 1500FT

PR1-001-225-0273 IT48-001A-DRO-4-WPVC-RIB-1300FT EZ-Bend 4.8mm Toneable Cable - Black - RIB - 1300FT

PR1-001-227-0273 IT48-001A-DRK-4-WPVC-RIB-1300FT EZ-Bend 4.8mm Toneable Cable - White - RIB - 1300FT

16 | WWW.OFSOPTICS.COM
 M-Pack Indoor/Outdoor MDU Drop Cable
Enhanced for Fiber-to-the-Subscriber (FTTx) and Multiple Dwelling Unit (MDU) Applications

PRODUCT DESCRIPTION
The M-Pack Indoor/Outdoor (I/O) MDU Drop Cable’s
enhanced, plenum-rated design, water-blocking
properties and UV-resistant jacket combine to create
a cable that allows an outdoor cable route to pass
directly into MDU or Individual Living Unit (ILU)
plenum spaces to speed routing and installation. This
compact, lightweight cable is an excellent choice for
FTTx MDU installations and is offered with a black or
white jacket to blend with existing decors.

FEATURES
• EZ-Bend® Ultra-Bend Insensitive Fiber for tight
Ordering Information
bend routing without concern for attenuation loss

Example: MO30-012B-DPK-41 • Compact and lightweight with 12 fibers in a

3.0mm cable or 24 fibers in a 3.8mm cable
Part Number: MONN - NNN C - W X Y - Z

MO = M-Pack Indoor/Outdoor MDU Drop Cable • Meets the Indoor/Outdoor requirements of MDU
FTTx Application (ICEA-S-730 TPR-9424)
NN = Cable Size
30 = 3.0 mm M-Pack Cable (4-12 Fibers) • Plenum rated for MDU spaces; rated for indoor/
38 = 3.8 mm M-Pack Cable (16 and 24 Fibers)
outdoor use
NNN = Fiber Count
001, 004, 006, 008, 012, 016 & 024
BENEFITS
C = Cable Version
B = Plenum • Small outer diameter for more efficient duct
A = LSZH
utilization
W= Fiber Type (see chart to the left)
D = EZ-Bend® Ultra Bend Insensitive Optical Fiber • Allows direct routing from building exterior into
(G.657.B3) living areas
X= Jacket Material (Flame Retardant)
P = Plenum • Easy deployment and termination
H = LSZH
• “Staple-ready” cable for easier routing and high
Y= Jacket Color compressive load resistance
K = Black
W = White • Versatile cable design for a wide range of
Z= Maximum Cable Attenuation (MCA) applications
4 = 0.4/0.3 dB/km @ 1310/1550 nm

1
Part Number shown is for an M-Pack Indoor/Outdoor MDU
Drop Plenum-Rated Cable with 12 EZ-Bend Ultra-Bend
Insensitive Fibers and standard cable print.
OFS M-PACK® EZ-BEND® G.657.B3 OPTICAL CABLE –C- MO30-
012B-DPK-4 9/125 OFNP-FT6 C(UL) OFNP {MM/YY} {Lot No}
{LENGTH IN FEET}

2
Contact OFS Order Management for information on other cable
variations including additional fiber types, attenuation and
custom cable print.
OFS FTTx SOLUTION GUIDE | 17
 InvisiLight® Solutions
Virtually Invisible within the MDU and ILU

Fiber-to-the-Home (FTTH) and Fiber-to-the-Business indoor fiber deployment from traditional methods.
(FTTB) deployment is accelerating globally, offering In this way, the InvisiLight Solutions can help to
ultra-high speed Gigabit service to consumers. The significantly improve the consumer experience while
OFS InvisiLight Optical Solution, launched in 2012, is lowering costs and speeding installation. These
a revolutionary system that enables fast, easy-to-install benefits result in higher subscriber acceptance and
and almost invisible fiber drop connection within the take rates, higher profitability and faster time-to-
indoor living unit (ILU) or businesses for fiber-to-the- revenue for service providers.
desk (FTTD) services. OFS’ EZ-Bend® Optical Fiber
enables worry-free bending around the many tight ADVANTAGES
corners typically found inside buildings and rooms. • Easy, quick install
These optical fibers surpass the G.657.B3 technical
• Simple and flexible versus traditional methods
standard, with a 2.5 mm bend radius, helping to ensure
reliable, ultra-high-speed Internet and services. • Paintable and blends into decor

The InvisiLight Optical Solution is available in a • EZ-Bend fiber enables virtually unlimited number
multiple fiber version for multi-dwelling unit (MDU) of bends
hallway and riser applications. Leveraging this same • No nails, staples or sawing
proven technology, the InvisiLight MDU Solution
• Attaches to typical indoor surfaces
helps make optical fiber easily available to each
building tenant. InvisiLight solutions can help • Reliable and protected by its proximity
accelerate the adoption of fiber optic services in • Easy to reposition or remove
residential or business premises by differentiating

InvisiLight
Wall Module

SlimBox 12-Fiber
Wall Mount Module

InvisiLight
Point of Entry Module

18 | WWW.OFSOPTICS.COM
 InvisiLight® Products Continued

Product Specifications InvisiLight® ILU Solution InvisiLight MDU Solution

• One 900 or 600 µm EZ-Bend Optical Fiber • 2-12 250 µm EZ-Bend Optical Fibers in a
Size • 10X smaller than 2.9 mm cordage 2 mm cord; 16 fibers in 2.3 mm cord
• 5 to 20X smaller than tape-based cables • 15X smaller than tape-based cables

Building/MDU hallways or risers if in OFNR

Application Indoor living unit (home or flat)
(or equivalent national standard) duct

Install Process Quick, simple and low-cost installation process to adhere fiber to wall or ceiling surfaces

Adhesive applicator tool for quick installation; through-wall application tool;

Install Tools
and optical extender tool to apply adhesive without a ladder

• adhesive (in tubes) with precision pre-cut

• adhesive (in tubes) with precision pre-cut
tip (fits in applicator tool)
tip (fits in applicator tool)
• Inside and outside corner protectors, wall
Install Materials • Inside and outside corner protectors, wall
plugs and caps
plugs and caps
• Mechanical connector or pigtail
• Indoor unit surface-mounted wall module
• POE wall module outside tenant unit
• Factory-terminated connectors for closet
• Plug-and-play, factory-terminated
Connectors • Mechanical connectors or splice pigtails
connectors
for point-of-entry

Adheres to most common types of painted

Surface Mounting
and unpainted indoor wall, molding and ceiling surfaces

• Minimal disruption to owners or tenants

• Virtually invisible and blends into the decor
• Can be caulked and painted with latex and oil-based indoor paint
Aesthetics
• Can be repositioned or removed and reapplied if required without damage
• Easily installed around corners, obstacles and on textured surfaces
• Safe and naturally protected in crevices

Supports maximum 30 outside corners Supports maximum 40 outside corners

Corners
and 30 inside corners* and no limit on inside corners*

Spool Lengths Available in various spool lengths

Slack Management Built-in auto-slack manager POE module has storage space for slack

• Temperature ≥ 50 ºF (≥10 ºC) for adhesive installation

Install Conditions
• No humidity restriction or preconditioning required

Operating Conditions 14 ºF to 140 ºF (-10 ºC to 60 ºC)

Does not require entry

Safety Does not require entry into MDU attics
into single-family home attics

InvisiLight Multifiber Cord: OFNR/FT4

For in-between floors, in risers or through fire
Standards UL-1651 compliant fiber and adhesive
walls, it may be placed inside OFNR-rated
conduits or ducts

Environmentally friendly, free of heavy metals, RoHS compliant and not hazardous to human
Environmental
touch. Minimal scrap/waste remains after installation process is complete.

* See InvisiLight Optical Solutions Data Sheet for further guidance

OFS FTTx SOLUTION GUIDE | 19

 InvisiLight® Solutions
Virtually Invisible and Accepted by Customers

1 Install wall module. 2 Plan installation path.

3 Apply corner protectors. 4 Spool out InvisiLight® Fiber.

5 Apply adhesive. 6 Secure InvisiLight Fiber.

7 Close cover. “NOT SEEING IS BELIEVING”

20 | WWW.OFSOPTICS.COM
 InvisiLight® Solutions
InvisiLight ILU Solution: Complete Kit

The InvisiLight ILU Solution is offered as a complete kit consisting of:

A wall-mounted interconnection module;

A spool that spins EZ-Bend® Optical Fiber (terminated with SC-APC connectors)
out of the module to the exact length needed and manages slack;

6 corner protectors, 4 wall plugs and caps and one through-wall placement tool

Adhesive (in tubes)

CHECK OUT OUR INSTALLATION VIDEO

https://youtu.be/bwdfNYm_sPw

80x80 Module

Plugs and Caps Corner Protectors Adhesive Dispensing Tool and

Adhesive (in tube)

OFS FTTx SOLUTION GUIDE | 21

 InvisiLight® ILU Solutions
InvisiLight 80x80 Wall Module

PRODUCT DESCRIPTION
The InvisiLight 80x80 Wall Module is provided with
an SC APC external shuttered adapter. There are
two ports of entry at the bottom of the module. The
InvisiLight Fiber exits on the left-hand side and the
patch cord is attached to the shuttered adapter on the
right-hand side of the module. The SC APC shuttered
simplex adapter snaps into the designated adapter
port with the shutter on the outside and the hinged
shutter to the top of the adapter port. The shutter
provides dust protection when the patch cord is not
engaged. The removable flanges allow longer lengths
on the spool but must be removed prior to inserting
the spool into the module. External View
Dimensions: 3.15” W x 3.15” H x .807” D

FEATURES AND BENEFITS

• Houses the compact InvisiLight spool which holds
900 micron EZ-Bend InvisiLight fiber with SCA
Open with Spool
connectors factory terminated and tested
• Disposable flanges allows up to 40 m to be
dispensed while storing <10 m of fiber
• Standardized spool drum design enhances
compatibility with other or larger wall mount
modules
• Color-coded adapters provide easy fiber
identification: SCA is simplex SC APC (green)
• Patented design in compact package
• RoHS-compliant, free from heavy metals and
environmentally friendly
• IEC 60529 IP20, RoHS

22 | WWW.OFSOPTICS.COM
 InvisiLight® 80x80 Wall Module Continued

Ordering Information

Part No. Product Code Material Description

301147609 NVSLGHTC-D-SASSAS-80X80 KIT- InvisiLight 600 µm fiber 80 X 80 20 meter spool, module with SC
600UM-20M-EA APC short boot connectors on both ends and an SC APC adapter.

301153250 NVSLGHTC-D-SASSAS-80X80 KIT- InvisiLight 600 µm fiber 80 X 80 25 meter, module with SC APC
600UM-25M-EA short boot connectors on both ends and an SC APC adapter

301147617 NVSLGHTC-D-SASSAS-80X80 KIT- InvisiLight 600 µm fiber 80 X 80 30 meter spool, module with SC
600UM-30M-EA APC short boot connectors on both ends and an SC APC adapter.

301147625 NVSLGHTC-D-SASSAS-80X80 KIT- InvisiLight 600 µm fiber 80 X 80 40 meter spool, module with SC
600UM-40M-EA APC short boot connectors on both ends and an SC APC adapter.

301117271 NVSLGHTC-D-SCASCA-80x80 KIT- Connectorized 20-meter spool, six (6) inside and outside corner
20M-EA protectors, module e/w adapter, four (4) wall plugs and caps, one
(1) through-wall tool and instructions

301117289 NVSLGHTC-D-SCASCA-80x80 KIT- Connectorized 30-meter spool, six (6) inside and outside corner
30M-EA protectors, module e/w adapter, four (4) wall plugs and caps, one
(1) through-wall tool and instructions

301117297 NVSLGHTC-D-SCASCA-80x80 KIT- Connectorized 40-meter spool, six (6) inside and outside corner
40M-EA protectors, module e/w adapter, four (4) wall plugs and caps, one
(1) through-wall tool and instructions

Other InvisiLight Accessories

301079117 NVSLGHTC-TUBE, 30ML 25-pack of adhesive (in tubes) and application tips
ADHESIVE 025/PK

301079125 NVSLGHTC-TUBE, 30ML 50-pack of adhesive (in tubes) and application tips
ADHESIVE 050/PK

301079133 NVSLGHTC-TUBE, 30ML ADHESIVE 100-pack of adhesive (in tubes) and application tips
100/PK

301079109 NVSLGHTC-MINI DISPENSING TOOL Dispensing tool for adhesive application

301143202 NVSLGHTC-CORDGUIDE TOOL W/ InvisiLight pole extension tool

EXTENDER 2 FT

OFS FTTx SOLUTION GUIDE | 23

 InvisiLight® Wall Module

Dimensions: 4.96“ W x 4.53” H x 1.41” D

Same Features and Benefits as the InvisiLight 80x80 Wall Module.

Ordering Information

Part No. Product Code Material Description

301099115 NVSLGHTC-D-SCASCA- Connectorized 20-meter spool, six (6) inside and outside corner protec-
MODULE KIT-20M-EA tors, module e/w adapter, four (4) wall plugs and caps, one (1) through-
wall tool and instructions

301099123 NVSLGHTC-D-SCASCA- Connectorized 30-meter spool, six (6) inside and outside corner protec-
MODULE KIT-30M-EA tors, module e/w adapter, four (4) wall plugs and caps, one (1) through-
wall tool and instructions

301099131 NVSLGHTC-D-SCASCA- Connectorized 40-meter spool, six (6) inside and outside corner protec-
MODULE KIT-40M-EA tors, module e/w adapter, four (4) wall plugs and caps, one (1) through-
wall tool and instructions
301106654 NVSLGHTC-D-LCULCU- Connectorized 30-meter spool, six (6) inside and outside corner pro-
MODULE KIT-30M-EA tectors, module e/w LC adapter, four (4) wall plugs and caps, one (1)
through-wall tool and instructions

301106662 NVSLGHTC-D-LCULCU- Connectorized 40-meter spool, six (6) inside and outside corner pro-
MODULE KIT-40M-EA tectors, module e/w LC adapter, four (4) wall plugs and caps, one (1)
through-wall tool and instructions

Other InvisiLight Accessories

301079117 NVSLGHTC-TUBE, 30ML 25-pack of adhesive (in tubes) and application tips
ADHESIVE 025/PK

301079125 NVSLGHTC-TUBE, 30ML 50-pack of adhesive (in tubes) and application tips
ADHESIVE 050/PK

301079133 NVSLGHTC-TUBE, 30ML 100-pack of adhesive (in tubes) and application tips
ADHESIVE 100/PK

301079109 NVSLGHTC-MINI DISPENS- Dispensing tool for adhesive application

ING TOOL

301115671 NVSLGHTC-POLE EXTEN- InvisiLight pole extension tool

SION TOOL

24 | WWW.OFSOPTICS.COM
 InvisiLight® EZ-Connect Module

PRODUCT DESCRIPTION
The InvisiLight EZ-Connect Module is provided with an integrated jumper
to connect to the ONT. This jumper is available in two versions: 2 mm
or 3 mm Outside Diameter with 2.5 and 1.5 meter lengths respectively.
The InvisiLight tight buffer optical fiber exits on one of the four module
corners. The module has an internal parking space for the inside SC
connector end. The internal spool allows slack management of the tight
buffer and jumper and may be locked in order to spool out by hand the
desired length of jumper. The bottom layer of the spool supports up to 40
meters of InvisiLight tight buffer optical fiber.
Open with Spool
FEATURES AND BENEFITS
• Handles 900 µm InvisiLight Optical Fiber and the slack management
for tight buffer optical fiber and the ONT jumper
• Wall mounted compact module
• Allows up to 40 meters to be dispensed on the bottom layer and up
to 2.5 meters of 2 mm cord on the top spool layer (up to 1.5 meters
considering a 3 mm cord)
• Spool locking system to facilitate the jumper spooling out
• RoHS-compliant; free from heavy metals and environmentally friendly

External View

Ordering Information for InvisiLight EZ-Connect Module

Part No. Product Code Material Description

301141818 NVSLGHTD-D-SCASCA-1- EZ-Connect module with 5.0 meters of 900 µm fiber on the top layer and 40
NAM-KIT 900-5.0M/40M meters of 900 µm fiber on the bottom layer; pre-connectorized both ends
with SCA connectors

301141826 NVSLGHTD-D-SCASCA-1- EZ-Connect module with 2.5 meters of 2.0 mm fiber on the top layer and 40
NAM-KIT 2MM-2.5M/40M meters of 900 µm fiber on the bottom layer; pre-connectorized both eneds
with SCA connectors

301141834 NVSLGHTD-D-SCASCA-1- EZ-Connect module with 1.5 meters of 3.0 mm fiber on the top layer and 40
NAM-KIT 3MM-1.5M/40M meters of 900 µm fiber on the bottom layer; pre-connectorized both ends
with SCA connectors

30115092 NVSLGHTD-D-LCSLCS-2- EZ-Connect module with 1.0 meter of 2.0 mm fiber on the top
NAM-1.0M/20M layer and 20 meters of 900 μm fiber on the bottom layer; preconnectorized
both ends with LCU connectors

WWW.OFSOPTICS.COM | 25
 InvisiLight® MDU Solutions
InvisiLight Compact Point-of-Entry (POE) Module

Dimensions: 6.0” W x 1.6” H x 0.625” D

FEATURES AND BENEFITS

• Allows termination of fiber in the InvisiLight
PRODUCT DESCRIPTION Multifiber Cord through direct connectorization
The Compact Point-of-Entry (POE) Module serves as or splicing (fusion or mechanical) to optical
the transition point between the building hallway and extensions (pigtails) of two optical fibers
the office or living unit. Following an installation survey, • Accommodates one internal SC-A optical adapter
the installer mounts this module on the exterior wall
of each living unit or office. A fusion-spliced pigtail • Access points in each side allows cable access
or mechanical connector connects the InvisiLight from the top of the module
Multifiber Cord to the plug-and-play InvisiLight Indoor • InvisiLight ILU or jumper output occurs from the
Living Unit (ILU) Solution. The Compact POE Module base of the module through two access points
is part of the InvisiLight Multiple Dwelling Unit (MDU)
• The multi-position adapter support allows the
Solution.
adapter to be housed in three different positions

Ordering Information for Compact POE Module

Part No. Product Code Material Description

301123998 NVSLGHTHI-COMPACT-MODULE W/LCA ADAPTER Module, with LC APC adapter for use with the
InvisiLight Multifiber Cord

301124004 NVSLGHTHI-COMPACT-MODULE W/SCA ADAPTER Module, with SC APC adapter for use with the
InvisiLight Multifiber Cord
Compact POE Module (UV-Rated for Breezeway Applications)
301145751 NVSLGHTHO-CMODULE-GRAY-W/ SCA ADAPTER Compact Point-of-Entry (POE) Module, Indoor/
outdoor, gray, SCA

301152880 NVSLGHTHO-CMODULE-GRAY-W/ LCA ADAPTER Compact Point-of-Entry (POE) Module, Indoor/

outdoor, gray, LCA

InvisiLight® Standard Point-of-Entry (POE) Module

Dimensions: 5.25“ W x 2.5” H x 0.77” D

Ordering Information for Standard POE Module

301107447 NVSLGHTH-MODULE E/W LCA ADAPTER Additional point-of-entry (POE) module with LC-APC
adapter

301107454 NVSLGHTH-MODULE E/W SCA ADAPTER Additional point-of-entry (POE) module with SC-APC
adapter

301107462 NVSLGHTH-MODULE E/W SPLICE TRAY Additional point-of-entry (POE) module with splice tray

26 | WWW.OFSOPTICS.COM
 InvisiLight® MDU Solutions
InvisiLight 4/8/12/16-Fiber

PRODUCT DESCRIPTION STANDARDS AND TESTING

• Four fiber count cords are available: • Meets Telcordia GR-326 and GR-1435 standards
• Four (4), eight (8), and twelve (12) color-coded • The InvisiLight Multifiber cord is OFNG-FT4,
optical fibers, within a 2 mm outer diameter OFNR-LS, and UL 1666 OFSNR-LS
(OD) sheath
• RoHS compliant; free from heavy metals and
• Sixteen (16) color-coded optical fibers, within
environmentally friendly; nonhazardous to human
a 2.3 mm outer diameter (OD) sheath
touch and creates negligible waste
• EZ-Bend® Optical Fiber, compliant with G.657.
• Fully tested for compatibility with most wall and
B3; fully splice compatible with outstanding
ceiling materials; easily painted with both latex
macrobending performance (1 turn at 1550 nm):
and oil-based paints
• <0.1 dB loss at 5 mm bend radius
• <0.2 dB loss at 2.5 mm bend radius INVISILIGHT ADHESIVE
• Capable of supporting a maximum of 40 outside • Opaque color during application; turns clear after
corners with no limit on inside corners approximately 1 hour
• Field termination required at the living unit (field- • Set Time: 15 minutes
installable connector or pigtail splice) Tack-Free Time: 45 minutes
• Must be installed in riser-rated conduit in risers, Full Cure Time: 24 hours depending on
in-between floors, through firewalls or when not temperature, humidity, and thickness of adhesive
adhered to a supporting surface • Long term storage is best at room temperature.
Keep the adhesive tubes from freezing and
below at +38 ºC
Operating Temperature Cured: -40 ºC to 60+ ºC
Installation Temperature: ≥ +10 ºC

Ordering Information for InvisiLight 4/8/12/16-Fiber

Part Number Product Code Description
InvisiLight MDU Solution Kits (4-Fiber)
NVSLGHTHI-D-UNCUNC-CMODUL Unconnectorized 4-fiber InvisiLight Multifiber Unit, 100 meters, 4
301140612
KIT-04-100M EA compact point-of-entry (POE) modules and components
NVSLGHTHI-D-UNCUNC-CMODUL Unconnectorized 4-fiber InvisiLight Multifiber Unit, 300 meters, 4
301140620
KIT-04-300M EA compact point-of-entry (POE) modules and components
SC-APC connectorized (one end) 4-fiber InvisiLight Multifiber Unit,
NVSLGHTHI-D-SASUNC-CMODUL
301140562 100 meters, 4 compact point-of-entry (POE) modules and
KIT-04-100M EA
components
SC-APC connectorized (one end) 4-fiber InvisiLight Multifiber Unit,
NVSLGHTHI-D-SASUNC-CMODUL
301140554 300 meters, 4 compact point-of-entry (POE) modules and
KIT-04-300M EA
components

WWW.OFSOPTICS.COM | 27
InvisiLight® 4/8/12/16-Fiber Continued

Ordering Information for InvisiLight 4/8/12/16-Fiber Continued

Part Number Product Code Description

InvisiLight MDU Solution Kits (8-Fiber)

NVSLGHTHI-D-UNCUNC-CMODUL KIT- Unconnectorized 8-fiber InvisiLight Multifiber Unit, 100 meters, 8 compact
301140638
08-100M EA point-of-entry (POE) modules and components

NVSLGHTHI-D-UNCUNC-CMODUL KIT- Unconnectorized 8-fiber InvisiLight Multifiber Unit, 300 meters, 8 compact
301140646
08-300M EA point-of-entry (POE) modules and components

NVSLGHTHI-D-SASUNC-CMODUL KIT- SC-APC connectorized (one end) 8-fiber InvisiLight Multifiber Unit,
301140570
08-100M EA 100 meters, 8 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-SASUNC-CMODUL KIT- SC-APC connectorized (one end) 8-fiber InvisiLight Multifiber Unit,
301140588
08-300M EA 300 meters, 8 compact point-of-entry (POE) modules and components

InvisiLight MDU Solution Kits (12-Fiber)

NVSLGHTHI-D-SCAUNC-Module Kit-12- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 100 me-
301117149
100M-EA ters, 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-SCAUNC-MODULE KIT- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 200 me-
301139408
12-200M-EA ters, 12 point-of-entry (Large POE) modules and components

NVSLGHTHI-D-SCAUNC-Module Kit-12- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 300 me-
301117156
300M-EA ters, includes 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-MTFUNC-Module Kit- MPO (Ribbon) connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 100
301117180
12-100M-EA meters, includes 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-MTFUNC-Module Kit- MPO (Ribbon) connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 300
301117198
12-300M-EA meters, includes 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-LCAUNC-Module Kit-12- LC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 100 me-
301117164
100M-EA ters, includes 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-LCAUNC-Module Kit-12- LC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 300 me-
301117172
300M-EA ters, includes 12 point-of-entry (POE) modules and components

NVSLGHTHI-D-UNCUNC-Module Kit- Unconnectorized 12-fiber InvisiLight Multifiber Unit, 100 meters, includes 12
301117123
12-100M-EA point-of-entry (POE) modules and components

NVSLGHTHI-D-UNCUNC-Module Kit- Unconnectorized 12-fiber InvisiLight Multifiber Unit, 300 meters, includes 12
301117131
12-300M-EA point of entry (POE) modules and components

NVSLGHTHI-D-SCAUNC-CMODUL KIT- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 100 me-
301127007
12-100M-EA ters, 12 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-SCAUNC-CMODUL KIT- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 200 me-
301126942
12-200M-EA ters, 12 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-SCAUNC-CMODUL KIT- SC-APC connectorized (one end) 12-fiber InvisiLight Multifiber Unit, 300 me-
301133617
12-300M-EA ters, 12 compact point-of-entry (POE) modules and components

InvisiLight MDU Solution Kits (16-Fiber)

NVSLGHTHI-D-UNCUNC-CMODUL KIT- Unconnectorized 16-fiber InvisiLight Multifiber Unit,

301140653
16-100M EA 100 meters, 16 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-UNCUNC-CMODUL KIT- Unconnectorized 16-fiber InvisiLight Multifiber Unit,

301140661
16-300M EA 300 meters, 16 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-SASUNC-CMODUL KIT- SC-APC connectorized (one end) 16-fiber InvisiLight Multifiber Unit,
301140596
16-100M EA 100 meters, 16 compact point-of-entry (POE) modules and components

NVSLGHTHI-D-SASUNC-CMODUL KIT- SC-APC connectorized (one end) 16-fiber InvisiLight Multifiber Unit,
301140604
16-300M EA 300 meters, 16 compact point-of-entry (POE) modules and components

28 | WWW.OFSOPTICS.COM
 InvisiLight® MDU Solutions
InvisiLight 12 Fiber Assembly and Complete Kits

The InvisiLight MDU Solution can be surface mounted

in hallways and is virtually invisible. A compact cord
housing up to sixteen 250 µm EZ-Bend® optical fibers
is installed with the same process and tools used for
the field-proven InvisiLight ILU Solution. This helps to
ensure necessary bend radius performance needed
for the many corners that can exist in MDU hallways,
eases installer training, and simplifies inventory
management of common tools.

FEATURES AND BENEFITS

• Compact OFNR/FT4 rated cord can be installed in
riser spaces between floors and in hallways
• Pre-connectorized with MTP, SCA or LCA
connectors
• Same installation tool, adhesive, and process as
InvisiLight ILU Solution
• Supports fusion splicing or mechanical connector
in the Point-of-Entry Module

WWW.OFSOPTICS.COM | 29
InvisiLight® 12 Fiber Assembly and Complete Kits Continued

Ordering Information for Compact POE Module Kits

Part No. Product Code Material Description

301127007 NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-100M-EA SC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 100 meters, 12 compact
point-of-entry (POE) modules and components

301126942 NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-200M-EA SC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 200 meters, 12 compact
point-of-entry (POE) modules and components

301133617 NVSLGHTHI-D-SCAUNC-CMODUL KIT-12-300M-EA SC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 300 meters, 12 compact
point-of-entry (POE) modules and components

PR1-001- MPHW-012A-DRW-4-2.0MM-RIB-2000FT EZ-Bend 2.0mm 12 Fiber Cord

506-0273 White - RIB - 2000FT

NOTE: Custom lengths available upon request.

Ordering Information for Standard POE Module Kits

Part No. Product Code Material Description

301117149 NVSLGHTHI-D-SCAUNC-MODULE KIT-12-100M-EA SC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 100 meters, 12 point-of-
entry (POE) modules and components

301117156 NVSLGHTHI-D-SCAUNC-MODULE KIT-12-300M-EA SC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 300 meters, 12 point-of-
entry (POE) modules and components

301117180 NVSLGHTHI-D-MTFUNC-MODULE KIT-12-100M-EA MPO (Ribbon) connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 100 meters, includes 12
point-of-entry (POE) modules and components

301117198 NVSLGHTHI-D-MTFUNC-MODULE KIT-12-300M-EA MPO (Ribbon) connectorized (one end) 12-fiber

InvisiLight multifiber unit, 300 meters, includes 12
point-of-entry (POE) modules and components

301117164 NVSLGHTHI-D-LCAUNC-MODULE KIT-12-100M-EA LC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 100 meters, includes 12
point-of-entry (POE) modules and components

301117172 NVSLGHTHI-D-LCAUNC-MODULE KIT-12-300M-EA LC-APC connectorized (one end) 12-fiber

InvisiLight Multifiber Unit, 300 meters, includes 12
point-of-entry (POE) modules and components

301117123 NVSLGHTHI-D-UNCUNC-MODULE KIT-12-100M-EA Unconnectorized 12-fiber InvisiLight Multifiber

Unit, 100 meters, includes 12 point-of-entry (POE)
modules and components

301117131 NVSLGHTHI-D-UNCUNC-MODULE KIT-12-300M-EA Unconnectorized 12-fiber InvisiLight Multifiber

Unit, 300 meters, includes 12 point-of-entry (POE)
modules and components

NOTE: Custom kits available with various fiber counts and spool lengths.

30 | WWW.OFSOPTICS.COM
 V-Linx™ Solution
Solution Overview
The V-Linx Solution is a simple, reliable and cost-effective optical
cabling system for FTTH or FTTB deployment in buildings.

FEATURES AND BENEFITS

Terminal
• Fast installation: Fully plug-and-play system with no field
termination helps to reduce required labor. Up to 50%
shorter riser cable pull length for 10-story buildings, and
72% less riser cable for 30-story buildings when compared
to other conventional approaches
• Flexibility: Solution can be easily adapted to a vatiety of
building structures to meet business subscriber needs Combiner
• Compact: Innovative component, fiber and cable designs
to optimize available space usage in various building types
• Capital cost reduction: No need to equip all technicians
with field termination equipment or extensive training or
certification SlimBox 24-Fiber
• Reliable optical performance: AllWave FLEX+ ZWP Bend Wall Mount Module
Insensitive Fiber. Factory terminated and tested connectors.
Robust cable design and materials.

The V-Linx components can be configured to support a variety

of building types and applications.
Interconnects are typically used for FTTB via Ethernet, while
FDHs housing splitters are commonly used for FTTH via xPON
systems. The Interconnect or FDH is installed and connected to
the cable(s) directly from a switch or an OSP terminal, and then
to a V-Linx Terminal, Rack Mount Terminal or V-Linx Combiner.
For low-to-mid-rise buildings, only V-Linx Terminals may be
required and the MTP/MPO terminated riser cordage would be
pulled and directly plugged into the Interconnect. To connect 1RU Rack Mount Unit
customers, the customer drop assemblies are pulled into place Interconnect or Floor Terminal Option
and plugged in to connect the V-Linx Terminal to the customer
premise equipment (CPE).
For mid-to-high-rise buildings, V-Linx Combiners may be
placed beginning on the third floor and then on every six
floors thereafter. The AccuFlex™ MTP/MPO terminated cable
is then unspooled from the Combiner and plugged into the
Interconnect. The Combiner location should be based upon
duct space availability, customer density per floor and terminal 4RU Rack Mount Unit - Interconnect Option
requirements. Under that scenario, a V-Linx Terminal could be
placed on either each or on every other floor and MTP/MPO
terminated AccuPack® Cable would be unspooled and plugged
into the Combiner.
WWW.OFSOPTICS.COM | 31
 V-Linx™ Solution
V-Linx Combiner

FEATURES AND BENEFITS

• Capacity of 72-fiber terminations supporting up
to 36 duplex business subscriber connections or
72 xPON connections
• AllWave FLEX+ ITU-T G.657.A2 Single-Mode Fiber
with 7.5 mm bend radius; fully splice-compatible
with existing G.652.D installed base of fibers
• Assemblies 100% factory connectorized and
tested
The V-Linx Combiner accepts six MTP/MPO
• Male end on cable stub ends
connectorized 12-fiber ends from a V-Linx Terminal and
can support up to 36 duplex subscriber connections. • RoHS compliant
The distribution cable is a 72-fiber AccuFlex™ +
IFC Ribbon Cable that is factory connectorized and Performance Specifications
available in lengths up to 500 ft. If longer lengths are
Insertion Loss (maximum) 0.3 dB
required, contact your local OFS Representative. The
Return Loss (minimum) -65 dB for APC and
cable stub end will be factory terminated with six low
-55 dB for UPC
loss MTP/MPO Connectors that will be plugged into
Return Loss (nominal) -55 dB
the Interconnect.
Mating Durability 100 reconnects
NOTE: Products with other lengths may be ordered
but are subject to availability, pricing differential and Operating Temperature -40 to +85 ºC

lead time. Storage Temperature -40 to +85 ºC

Ordering Information

Part Number Product Code Material Description

301105995 VLINX-COMB-W-MTFMTM-RRCP-72-050F-PE Combiner, V-Linx 50 ft of AccuFlex Plus terminated with

06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end
301088761 VLINX-COMB-W-MTFMTM-RRCP-72-100F-PE Combiner, V-Linx 100 ft of AccuFlex Plus terminated with
06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end
301088779 VLINX-COMB-W-MTFMTM-RRCP-72-200F-PE Combiner, V-Linx 200 ft of AccuFlex Plus terminated with
06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end
301088795 VLINX-COMB-W-MTFMTM-RRCP-72-300F-PE Combiner, V-Linx 300 ft of AccuFlex Plus terminated with
06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end
301106001 VLINX-COMB-W-MTFMTM-RRCP-72-400F-PE Combiner, V-Linx 400 ft of AccuFlex Plus terminated with
06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end
301106019 VLINX-COMB-W-MTFMTM-RRCP-72-500F-PE Combiner, V-Linx 500 ft of AccuFlex Plus terminated with
06 female MTP connectors on the panel and 06 male
MPO connectors for the cable end

32 | WWW.OFSOPTICS.COM
 V-Linx™ Solution
V-Linx Wall Mounted Terminal

The V-Linx Terminal integrates plenum cable, slack

storage and drop terminal functionality into one compact
package. Typically wall-mounted in a telecom closet, the
V-Linx Terminal accepts 12 or 24 simplex connectors from
the customer drop assemblies to support 6 or 12 duplex
connections to businesses or 12 or 24 xPON subscribers. The
terminal is shipped with up to 500 ft. of M-Pack® Backbone V-Linx Wall Mounted
Terminal
Cable stored on the hub of the terminal, and is terminated
12-Count LC or SC
with 12-fiber MTP/MPO low-loss connectors on the outside
24-Count LC Only
end. It is available with SC or LC factory terminated and
tested connectors on the back side of the subscriber-facing
patch panel. The outside end of the cable can be connected
to a V-Linx Combiner or EMUX Interconnect. FEATURES AND BENEFITS

NOTE: Products with other lengths may be ordered, but are • Capacity of 12- or 24-fiber terminations supporting up
subject to availability, pricing differential and lead time. to 6 or 12 duplex business subscriber connections
• AllWave® FLEX+ ITU-T G.657.A2 Single-Mode Fiber
Performance Specifications with 7.5 mm bend radius; fully splice-compatible with
Insertion Loss (maximum) 0.3 dB existing G.652.D installed base of fibers

Return Loss (maximum) -65 dB for APC and • Assemblies 100% factory connectorized and tested
-55 dB for UPC • Choice of SC-UPC or LC-UPC connectors
Mating Durability 100 reconnects
• RoHS compliant
Operating Temperature -40 to +85 ºC
• Available as 12- or 24-fiber terminals that are terminated
Storage Temperature -40 to +85 ºC with 1 or 2 low loss 12-fiber MTP/MPO connectors

Ordering Information

Part No. Product Code Material Description

301133849 VLINX-TERM-LRG-B-SCAMTM-MBIP-12-100F-PE Terminal, V-Linx 100 ft of 12 fiber cordage terminated

with SC APC at the patch panel, male MTP on cable end
301133856 VLINX-TERM-LRG-B-SCAMTM-MBIP-12-200F-PE Terminal, V-Linx 200 ft of 12 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301133864 VLINX-TERM-LRG-B-SCAMTM-MBIP-12-300F-PE Terminal, V-Linx 300 ft of 12 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134086 VLINX-TERM-LRG-B-SCAMTM-MBIP-24-100F-PE Terminal, V-Linx 100 ft of 24 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134094 VLINX-TERM-LRG-B-SCAMTM-MBIP-24-200F-PE Terminal, V-Linx 200 ft of 24 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134102 VLINX-TERM-LRG-B-SCAMTM-MBIP-24-300F-PE Terminal, V-Linx 300 ft of 24 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134326 VLINX-TERM-LRG-B-SCAMTM-MBIP-8-100F-PE Terminal, V-Linx 100 ft of 8 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134334 VLINX-TERM-LRG-B-SCAMTM-MBIP-8-200F-PE Terminal, V-Linx 200 ft of 8 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
301134342 VLINX-TERM-LRG-B-SCAMTM-MBIP-8-300F-PE Terminal, V-Linx 300 ft of 8 fiber cordage terminated
with SC APC at the patch panel, male MTP on cable end
WWW.OFSOPTICS.COM | 33
 V-Linx™ Solution
V-Linx Combiner and Installation Tool

Specifications

Number of Terminations
6 MTP/MPO connectors (12 fibers per connector)
(common)

Wall Mountable All surfaces

Color Central Office White

Fire Rating of Plastics UL-94, rated V-0

In-Use Temperature Rating -5 ºC to +50 ºC (23 ºF to 122 ºF)

Storage Temperature Rating -20 ºC to +70 ºC (-4 ºF to +158 ºF)

Standard Form Factor Sizing

Max Cable Length X Y Z A B
Spool Type
on Combiner Spool (width) (height) (depth) (depth) (height)
Sheet metal
Combiner 50 ft 7.5” 7.5” 7.0”
(not disposable)
Plastic corrugated
Combiner Spool 300 ft 5.5” 16”
(disposable)
Combiner Wood
> 300 ≤ 500 ft 18” 30”
Pre-Terminated Reel (disposable)

The V-Linx Installation Tool (also known as V-Linx Spool Tool) helps enable
fast and easy installation of the V-Linx Wall Mounted Terminal and the V-Linx
Combiner.

Standard Form Factor Sizing

Material Type X (width)

V-Linx Installation Tool Sheet metal 10”

Ordering Information

Part Number Product Code Material Description

301001244 VLINX-SPOOL-TOOL V-Linx Spooling Tool

NOTE: The V-Linx Installation Tool is compatible with all versions of the
V-Linx Terminal. The V-Linx Installation Tool may require a locking pin with
variable length depending upon the size of the spool.

34 | WWW.OFSOPTICS.COM
 Interconnect Options
1RU Shelf

FEATURES AND BENEFITS

• Capacity of 24 fiber terminations supporting up
to 12 duplex business subscribers or 24 simplex
xPON subscribers
• AllWave FLEX+ ITU-T G.657.A2 Single-Mode Fiber
with 7.5 mm bend radius; fully splice-compatible
with existing G.652.D installed base of fibers
The interconnect provides an optical interconnect
between the ethernet switch, router, or OSP cable • Assemblies 100% factory connectorized and
and the building cabling system. It is compatible and tested
plug-and-play ready with all V-Linx™ terminals or • Panel is equipped with two 12-fiber MTP/MPO to
combiners, and requires no field termination. SC adapter low loss fanouts
The 1RU Rack Mount Interconnect Shelf is a rack • 4 cable entry ports with grommets in the rear of
mounted shelf that accepts 24 fibers from the V-Linx the unit
Terminal(s). The shelf can be mounted in a 19” or 23”
• Dimensions: 1.72” Height x 17” Width x 8” Depth
frame. The patch panel on the front is equipped with
SC-UPC adapters. • Compact and mountable on standard 19” or 23”
racks
NOTE: The 1RU Shelf can support 2x12 or 1x24
count Terminals. Picture shown does not include pre- • RoHs compliant
connectorized MTP/MPO AccuPack™ Cable.

Optical Performance

Insertion Loss (maximum) 0.3 dB

Return Loss (minimum) -65 dB for APC and -55 dB for UPC

Mating Durability 100 reconnects

Operating Temperature -40 to +85 ºC

Storage Temperature -40 to +85 ºC

Ordering Information

Part Number Product Code Material Description

301088506 VLINX-1U S-LIU 24-MTFSCU-FO Rack Mount, 1RU SCU Sheld for 2x12 or
1x24 V-Linx count Terminal
301119921 VLINX-1U S-LIU 24-MTFSCA-FO Rack Mount, 1RU SCA Sheld for 2x12 or
1x24 V-Linx count Terminals

WWW.OFSOPTICS.COM | 35
 Interconnect Options
1RU Rack Mounted Shelf with Factory Terminated Cable

FEATURES AND BENEFITS

• Capacity of 24 fiber terminations with 12 duplex
business subscribers or 24 xPON subscribers
• AllWave® FLEX+ ITU-T G.657.A2 Single-Mode
Fiber with 7.5 mm bend radius; fully splice-
compatible with existing G.652.D installed base
of fibers
• Assemblies 100% factory connectorized and
tested

The Rack Mounted Pre-terminated Shelf may be used • Can be equipped with SC-UPC, SC-APC, or LC-
in a high rise building instead of a wall mount terminal UPC adapters on faceplate
when relay rack frameworks are available on multiple • 4 Cable entry ports with grommets in the rear of
floors serivng a variety of subscribers. It is available the unit
with SC or LC Adapters (24-fiber count only), and the
• Dimensions: 1.72” Height x 17” Width x 8” Depth
enclosure can be mounted in a 19” or 23” framework.
• RoHs compliant
The Panel is pre-terminated with a 24-Fiber M-Pack®
Backbone Cable which is held in place with grommets.
The far end of the cable is terminated with two 12-fiber OPTICAL PERFORMANCE
MTP/MPO low loss connectors and will be pulled and Insertion Loss (max): 0.7 dB
connected to the Interconnect. Return Loss (nominal): -55dB

Ordering Information

Part Number Product Code Material Description

301134508 LPS5-B-SCUMM1-MBIP-024-1S-100F-36N/39UPE Rack mount, pre-term 1RU panel 100 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC UPC patch end and a male MTP on cable end
301134516 LPS5-B-SCUMM1-MBIP-024-1S-200F-36N/39UPE Rack mount, pre-term 1RU panel 200 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC UPC patch end and a male MTP on cable end
301134524 LPS5-B-SCUMM1-MBIP-024-1S-300F-36N/39UPE Rack mount, pre-term 1RU panel 300 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC UPC patch end and a male MTP on cable end
301134565 LPS5-B-SCAMM1-MBIP-024-1S-100F-36N/39UPE Rack mount, pre-term 1RU panel 100 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC APC patch end and a male MTP on cable end
301134573 LPS5-B-SCAMM1-MBIP-024-1S-200F-36N/39UPE Rack mount, pre-term 1RU panel 200 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC APC patch end and a male MTP on cable end
301134581 LPS5-B-SCAMM1-MBIP-024-1S-300F-36N/39UPE Rack mount, pre-term 1RU panel 300 ft. of 24 fiber
M Pack Backbone Plenum Cable terminated with
SC APC patch end and a male MTP on cable end

36 | WWW.OFSOPTICS.COM
 V-Linx™ Solution
V-Linx Fiber Distribution Hub

The V-Linx Fiber Distribution Hub (FDH) can support up to

128 living units and is designed for NEMA 12 performance.
The FDH is size optimized by leveraging the very compact
Direct Connect Splitter. Its flexible design supports either
mass fusion splicing or rapid connection through multi-fiber
push-on (MPO) terminations.
The mounting hardware is re-configurable to support a
variety of wall mounting scenarios in both Greenfield and
Brownfield deployments. The FDH is also designed to be
installed by a single technician.

FEATURES AND BENEFITS

• Uses compact Direct Connect Splitters
• Quick provisioning of circuits with SCA connectors
• Minimal cable management from use of optimized
splitter cable lengths

Specifications

Dimensions 20” H x 18” W x 10” D

Weight (lb) 46

Terminations (OUT) 128

Color Light Beige

Performance

Fire Rating of Plastics UL-94, Rated V-O

Temperature Operation: 23 to 122 ºF

Storage: -4 to 158 ºF
Water Rating NEMA 12 - IP 52

Ordering Information

Part Number Product Code Material Description

301134631 VLINX-FDH-W-SCSUNC-128-12YT-048-100F Wall Mount, V-Linx FDH 128 fiber, 12-12 fiber fanouts

301134649 VLINX-FDH-W-SASUNC-128-12YT-048-100F Wall Mount, V-Linx FDH 128 fiber, 12-12 fiber fanouts

NOTE: MTP product configuration upon request for use with the V-Linx combiner.

WWW.OFSOPTICS.COM | 37
 Interconnect Options
72-Fiber Rack Mounted Interconnect Enclosure

FEATURES AND BENEFITS

• Capacity of 72-fiber connections translating to
36 duplex customer connections
• AllWave FLEX+ ITU-T G.657.A2 Single-Mode Fiber
with 7.5 mm bend radius; fully splice-compatible
with existing G.652.D installed base of fibers
12-Position Fiber Panel (front) • Assemblies 100% factory connectorized and
tested
The 72-fiber enclosure is a rack mounted panel which • Equipped with six 12-Fiber multifiber MTP/MPOs
can be mounted in a 19” or 23” relay rack framework. low loss fanouts with SC adapters
It is equipped with six MTP/MPO fan-out connectors
• Dimensions: 7” Height x 17” Width x 11.5” Depth
with SC adapters. This enclosure can accept
terminated cable with MTP/MPO connectors from • RoHS compliant
the V-Linx Combiner, Terminal or 1RU Rack Mounted
Panel, which would terminate on the panel front to the OPTICAL PERFORMANCE
pre-cabled MTP/MPO connectors. The SC adapters
Insertion Loss (max): 0.7 dB
are used to run patch cords from panel front to the
electronics or another fiber panel. Return Loss (nominal): -55dB

This enclosure supports a combination of 6 x 12, 3 x 24

or 1 x 72 count Terminals. Alternatively, it can support
a 1 x 72 count V-Linx Combiner.

Ordering Information

Part Number Product Code Material Description

301085270 LST1U-072-07-WHT-SCU/MTF(SM) Rack Mount, 72 SC UPC panel for 6x12, 3x24 count Terminals
or 1x72 V-Linx Combiner
301119905 LST1U-072-07-WHT-SCA/MTF(SM) Rack Mount, 72 SC APC panel for 6x12, 3x24 count Terminals
or 1x72 V-Linx Combiner

38 | WWW.OFSOPTICS.COM
 V-Linx™ Solution
Product Image Examples

V-Linx 12-Fiber SC Terminal Front V-Linx 12-Fiber V-Linx 24-Fiber

(with clip) SC Terminal Side LC Terminal Side

V-Linx 24-Fiber V-Linx Installation Tool V-Linx 24-Fiber Combiner

LC Terminal Front (with clip on side) on Spool Front

V-Linx Combiner Side Plastic Corrugated Spool Plastic Corrugated Spool

(50 meter version) Front Side

V-Linx Combiner Front

(50 meter version)

WWW.OFSOPTICS.COM | 39
 SlimBox™ Solutions
Plug and Play Solution

The SlimBox 64-Fiber Wall Mount Module is installed at the

basement of the building. The splitter inputs are connected
to the outside Plant cable(s). For low to midrise buildings, ony
InvisiLight MDU assemblies may be required and the SCA
SlimBox 64-Fiber
connectors would be directly plugged into the SlimBox ports.
Wall Mount Modules
Customers are connected by doing the connection between the
splitters output and the pre-terminated cables.

For mid to high rise buildings, as an option, SlimBox 12-Fiber

Wall Mount Module may be located at each floor or at every
three floors, and the M-Pack riser terminated cables will be
installed between the SlimBox 64-Fiber Wall Mount Module and
the SlimBox 12-Fiber Wall Mount Module. The location of the
SlimBox 12-Fiber Wall Mount Module should be based upon SlimBox 12-Fiber
Wall Mount Modules
duct space availability and customer density requirements per
floor. In that scenario, a SlimBox 12-Fiber Wall Mount Module
could be placed on every floor or every other floor.

SlimBox 12-Fiber
Wall Mount Modules

SlimBox 24-Fiber
Wall Mount Modules

SlimBox
Wall Plate

40 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions
SlimBox 64-Fiber Wall Mount Module

The SlimBox 64-Fiber Wall Mount Module provides the capability

of splicing, splitting, and patching between the building entrance
facility and the floor boxes or the customers’ points of entry. The
assembly is equipped to hold 3 mm, 2 mm and 1.6 mm cordages. The
compact dimensions are 8.74 x 14.37 x 3.93 in. The module can be
ordered with or without adapters. There are 4 cable entry/exit points
and eight patch cord entry/exit ports capable of accommodating
Outside Plant and Building Cables. The SC simplex adapter snaps
into the designated adapter port.

FEATURES AND BENEFITS

• Up to 64 internal ports (SC type)
• Handles 2.0 mm and 1.6 mm slack storage of assemblies
• Color-coded adapters provided easy fiber identification
• SCA is simplex SC APC (green)
• SCU is simplex SC UPC (blue)
• Compact package with internal adapters
• Providing parking capability, splitter capability and splicing
• RoHS compliant; free from heavy metals and environmentally
friendly
• Parking capacity available: 48 connectors
• Can house 8 splice trays: (12 splices each)

Ordering Information

Part Number Product Code Material Description

301112967 SLIMBOX-V, INDOOR MDU-64 FIBER-INSIDE ADP SlimBox 64 without adapters and with 8 splice trays

301121554 WSC1S-064-SM61-GRY-SCAUNC-X SlimBox 64 with 64 SCA adapters and 8 splice trays

301133633 WSC1W-064-SM61-GRY-SCAUNC-F-PT SlimBox 64 with 64 SCA adapters, 8 splice trays

and 64 pigtails

WWW.OFSOPTICS.COM | 41
 SlimBox™ Solutions
SlimBox 12-Fiber Wall Mount Module

EXTERNAL ADAPTERS
The SlimBox 12-Fiber Wall Mount Module provides the capability
of splicing, splitting, and patching between the building entrance
facility and the floor boxes or the customers’ points of entry. The
assembly is equipped to hold 3 mm, 2 mm and 1.6 mm cordages.
The ultra-compact dimensions are 4.84 x 5.88 x 1.79 in. The
module can be ordered with or without adapters. There are 4 cable
entry/exit points and eight patch cord entry/exit ports capable of
accomodating Outside Plant and Building Cables. The SC simplex
adapter snaps into the designated adapter port.

FEATURES AND BENEFITS

• Splice tray holds either 40 mm single fusion splice sleeves or
bare planar splitters
4.85”
• Cable entries at the bottom of the enclosure
• Multiple panels for housing adapters
• Small size requires minimal wall space
• Formed in plastic with high mechanical resistance providing
protection for splices and terminations
5.88”

• Can be installed on any vertical surface to reduce installation

time

1.79”

Ordering Information

Part Number Product Code Material Description

301039228 SLIMBOX-V, INDOOR MDU-12 FIBER BEIGE SlimBox 12 (External) without Adapters

301090171 WSC1S-012-SBM0-BGE-SCUUNC-F SlimBox 12 (External) with SC UPC Adapters

301060349 WSC1S-012-SBM0-BGE-SCAUNC-F SlimBox 12 (External) with SC APC Adapters

42 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions
SlimBox 12-Fiber Wall Mount Module with Internal Adapters

INTERNAL ADAPTERS
The SlimBox 12-Fiber Wall Mount Module is both a termination and
splice point for optical fiber in an indoor wall mounted environment.
Cable enters from the bottom and the grommets allow for pass
through of the fiber without splicing. The additional splice tray
provides pigtail and fanout splicing (single fusion splicing). Various
Panels come with the module for termination of SC, FC, ST and LC
(duplex) connectors.

FEATURES AND BENEFITS Internal View

• Greater protection for connections

• Formed in plastic with high mechanical resistance providing
protection for splices and terminations
• Color-coded adapters provide easy fiber identification
• SCA is simplex SC APC (green)
• SCU is simplex SC UPC (blue)
• Compact package
External View
• RoHS compliant
• Small size taking up minimal wall space
• Dedicated tray for pre-connectorized splitter Physical Characteristics
• Ideal for a pre-terminated FTTx network as floor distribution box Dimensions 8.5” H x 5.0” W x 2.8” D
or main distribution box for small building applications
Material ABS Plastic

Color Gray (RAL 7035)

Ordering Information

Part Number Product Code Material Description

301112959 SLIMBOX-V, INDOOR MDU-12F-INSIDE ADP GRAY SlimBox 12 (Internal) without Adapters

301122404 WSC1S-012-SM11-GRY-SCAUNC-F SlimBox 12 (Internal) with SC APC Adapters

301127031 WSC1W-012-SM11-GRY-SCAUNC-F-PT SlimBox 12 (Internal) with SC APC Adapters

and pigtails
301122412 WSC1S-012-SM11-GRY-SCUUNC-F SlimBox 12 (Internal) with SC UPC Adapters

WWW.OFSOPTICS.COM | 43
 SlimBox™ Solutions
SlimBox 12-Fiber Indoor/Outdoor Enclosure

The SlimBox Indoor/Outdoor 12-Fiber Enclosure is a termination

box used to connect distribution cables in the outside plant network
to FTTx network drop cables. The applications include Fiber to the
Home, From Building to MDU or Cell site. It enables quick and easy
connections of the drop cable through plug-and-play connectorized
drops into the box or using fusion splicing. The internal connection
is made through pre-terminated splitters or pre-connectorized
pigtails.
External View
FEATURES AND BENEFITS
• Internal adapters allow the use of preterminated drop cable;
the SlimBox Indoor/Outdoor Enclosure supports termination,
splicing and storage functions
• Compact design and loop through capability

Internal View
Physical Characteristics

Terminal Dimensions 7.88 x 8.86 x 2.56 inches

(W x H x D) 200 x 225 x 65 mm

Drop Cable Dimensions 3 mm round type

Body Material Plastic (PC + ABS)

Color Light Grey

Operation Temperature -40 ºC to 60 ºC

Sealing System for Drop Cables Mechanical

Internal Side View

SlimBox 12-Fiber Adapter Indoor/Outdoor Enclosure Ordering Information

Part No. Product Code Material Description

301139788 SLIMBOX-V, OUTDOORSVI-12FIBER-INSIDEADP SlimBox Indoor/Outdoor Wall Mount Unit for 12

Internal SC Adapters (No Adapters)
301139796 WSE1S-012-SV11-GRY-SCAUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 12
Internal SCA Adapters
301139804 WSE1W-012-SV11-GRY-SCAUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 12
Internal SCA Adapters and 12 SM Pigtails
301139812 WSE1S-012-SV11-GRY-SCUUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 12
Internal SCU Adapters
301139820 WSE1W-012-SV11-GRY-SCUUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 12
Internal SCU Adapters and 12 SM Pigtails
301135885 WSE4S-024-SV21-GRY-LCUUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 12
Internal LC duplex adapters

44 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions
SlimBox 24-Fiber Outdoor Enclosure

PRODUCT DESCRIPTION
The SlimBox Outdoor 24-Fiber is a termination box
used to connect distribution cables in the outside
plant FTTx drop cables. The applications include Fiber
to the Home, Building or Cell site. It enables quick
and easy connections of the drop cable through plug-
and-play connectorized drops into the box or fusion
splicing method. The internal connection is made
through pre-terminated splitters or pre-connectorized
pigtails.
The drop cable connections and disconnections are
performed exclusively inside the box without affecting
any previously connected cable. The enclosure allows
the installation of up to 24 assemblies using 3mm
or 16 assemblies using 4.8mm round drop cables
(available on request).
FEATURES AND BENEFITS
The termination box has one area for storage and
splicing, and a separate area for the management and • Versatile multifunction enclosure: Internal
the connection of the pigtails to the internal adapters. adapters allow the use of pre-terminated drop
It can be opened and closed without disturbing service cable
to customers. It supports up to 24 fusion splices. • Supports termination, splicing and storage
The aerial terminal is designed for both poles and wall functions
installations. • Compact design with loop through capability

Ordering Information

Part Number Product Code Material Description

301135851 SLIMBOX-V, OUTDOORMDU-24 SlimBox outdoor wall mount unit for 24 internal SC adapters (no
FIBER-INSIDEADP adapters)
301135869 WSE1W-024-SV21-GRY-SCUUNC-F SlimBox outdoor wall mount unit with 24 internal SCU adapters

301135877 WSE1W-024-SV21-GRY-SCAUNC-F SlimBox outdoor wall mount unit with 24 internal SCA adapters

301135885 WSE1W-024-SV21-GRY-LCUUNC-F SlimBox outdoor wall mount unit with 24 internal LCU adapters

301135893 WSE1W-024-SV21-GRY-LCAUNC-F SlimBox outdoor wall mount unit with 24 internal LCA adapters

301135901 WSE1W-024-SV21-GRY-SCUUNC-F-PT SlimBox outdoor wall mount unit with 24 internal SCU adapters
and 24 SM pigtails
301135919 WSE1W-024-SV21-GRY-SCAUNC-F-PT SlimBox outdoor wall mount unit with 24 internal SCA adapters
and 24 SM pigtails
301135927 WSE1W-024-SV21-GRY-LCUUNC-F-PT SlimBox outdoor wall mount unit with 24 internal LCU adapters
and 24 SM pigtails

WWW.OFSOPTICS.COM | 45
 SlimBox™ Solutions
SlimBox 24-Fiber Wall Mount Module

The SlimBox 24-Fiber Wall Mount Module is specifically

designed for indoor FTTx networks. This enclosure
accommodates and protects optical splices between input
cables and internal, indoor distribution cables for both
blown fiber and cable connections. The module is held in
place with cable ties from three locations on the side and
two locations from the base of the enclosure. While the entry
points on the enclosure base fit standard electrical outlets,
the SC simplex or duplex LC adapters snap easily into the
designated adapter ports. Available in two versions (with or
without adapters), the SlimBox Module’s dimensions are 12”
x 7.28” x 3.54”.

FEATURES AND BENEFITS

• Six ports of entry into the enclosure
• Handles 3.0 mm, 2.0 mm and 1.6 mm cordage and slack
storage of assemblies
• Color-coded adapters provide easy fiber identification
• SCA is simplex SC APC (green)
• SCU is simplex SC UPC (blue)

Wall Enclosure with 24 SC UPC • Compact package

ports, two MTP ports, and two • RoHS compliant; free from heavy metals and
12-fiber MTP/SCU fanouts
environmentally friendly

Ordering Information

Part Number Product Code Material Description

301121612 WSC1W-024-SM21-GRY-SCUMTF-FO Wall enclosure with 24 SC UPC ports, two MTP ports
and two 12-fiber MTP/SCU fanouts
301120788 WSC1W-024-SM21-GRY-SCUUNC-F-PT Wall enclosure with 24 SC UPC ports, splice trays
and 24 SM SC UPC pigtails
301120796 WSC1W-024-SM21-GRY-LCUUNC-F-PT Wall enclosure with 24 LC UPC ports, splice trays
and 24 SM LC UPC pigtails
301102804 WSC1W-024-SM21-GRY-SCAUNC-F-PT Wall enclosure with 24 SC APC ports, splice trays
and 24 SM SC APC pigtails
301120812 WSC1W-024-SM21-GRY-LCAUNC-F-PT Wall enclosure with 24 LC APC ports, splice trays
and 24 SM LC APC pigtails
301123741 SLIMBOX-V, INDOOR MDU-24 W/10 SPLICE TRAY Wall enclosure with ten of the 12 fiber splice tray
for fusion splicing

46 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions
SlimBox Wall Plate

FEATURES AND BENEFITS

• Supports factory terminated assemblies, field
installed mechanical connectors, or fusion spliced
pigtails
• Accommodates up to two internal optical adapters
(SC footprint)
• Flexible deployment with two access ports on the
top, two on the bottom and three through the
back of the module
• Compatible with electrical boxes
• Compact dimensions
• Discreet appearance
• Hidden cover screw for fast and secure cover
attachment to the base
PRODUCT DESCRIPTION
• Internal fiber guides for easy installation
The SlimBox Wall Plate serves as a termination point
or a demarcation point for optical fiber in an indoor • Can be installed on any vertical planar surface
environment. An EZ-Bend® jumper would connect • Plastic construction provides high mechanical
the SlimBox Wall Plate to a desktop ONT and the protection and efficient design
InvisiLight® ILU Solution or an EZ-Bend cable may be
• Accommodates two splice protectors (40 mm)
used to reach the wall plate.

Ordering Information

Part Number Product Code Material Description

301122826 SLIMBOX-V, INDOOR WALL PLATE-SC SlimBox Wall Plate SC

301122834 SLIMBOX-V, INDOOR WALL PLATE-1F-SM-SCA SlimBox Wall Plate with one SC APC Adapter

301122842 SLIMBOX-V, INDOOR WALL PLATE-2F-SM-SCA SlimBox Wall Plate with two SC APC Adapters

WWW.OFSOPTICS.COM | 47
 SlimBox™ Solutions
SlimBox 2- and 4-Fiber Indoor/Outdoor Enclosure

PRODUCT DESCRIPTION
The SlimBox 2- and 4-Fiber Indoor/Outdoor Enclosures is an
excellent choice as an external demarcation closure, featuring
dual functionality as either a splice or connector housing.
Designing to resemble other typical wall outlets in a home,
it is compact and inconspicuous enough to satisfy the most
discriminatnig homeowner, while protecting the valuable
SlimBox 2-Fiber Indoor/Outdoor Enclosure
network splice sleeves and/or connectors inside. The SlimBox
2- and 4-Fiber Indoor/Outdoor Enclosure can be used tfor
a wide variety of applications including Fiber-to-the-Home
(FTTH) and Fiber-to-the-Business (FTTB) applications.

FEATURES AND BENEFITS

• Protection level up to IP65
• Splicing and adapter connections inside the module
• Can be wall mounted or pole mounted SlimBox 4-Fiber Indoor/Outdoor Enclosure

Ordering Information for SlimBox 2-Fiber Indoor/Outdoor Enclosure

Part Number Product Code Material Description

301139630 SLIMBOX-H, OUTDOOR SVI-2-FIBER-INSIDEADP SlimBox Indoor/Outdoor Wall Mount Unit for 2
(no adapters) Internal SC Adapters

301139648 WSE1S-002-SS21-GRY-SCAUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 2

Internal SCA Adapters
301139655 WSE1W-002-SS21-GRY-SCAUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 2
Internal SCA Adapters and 2 SM Pigtails
301139663 WSE1S-002-SS21-GRY-SCUUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 2
Internal SCU Adapters
301139671 WSE1W-002-SS21-GRY-SCUUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 2
Internal SCU Adapters and 2 SM Pigtails
Ordering Information for SlimBox 4-Fiber Indoor/Outdoor Enclosure

301139689 SLIMBOX-H, OUTDOOR SVI-4-FIBER-INSIDEADP SlimBox Indoor/Outdoor Wall Mount Unit with 4
Internal SCA Adapters
301139697 WSE1S-004-SS41-GRY-SCAUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 4
Internal SCA Adapters
301139705 WSE1W-004-SS41-GRY-SCAUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 4
Internal SCA Adapters and 4 SM Pigtails
301139713 WSE1S-004-SS41-GRY-SCUUNC-F SlimBox Indoor/Outdoor Wall Mount Unit with 4
Internal SCU Adapters
301139721 WSE1W-004-SS41-GRY-SCUUNC-F-PT SlimBox Indoor/Outdoor Wall Mount Unit with 4
Internal SCU Adapters and 4 SM Pigtails

48 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions Complementary Products
Pre-Connectorized ACCUMAX® Fiber Optic Cables

FEATURES AND BENEFITS

• Based on ACCUMAX cable with flexible and
robust cabling solution for vertical or horizontal
applications

PRODUCT DESCRIPTION • Cable fiber counts of 2 to 144

Factory connectorized ACCUMAX cables save time • SCA or LCA terminations

and money by avoiding the need for field termination • OFS AllWave FLEX+ Zero Water Peak (ZWP)
or splicing. Factory-tuned and tested connectors offer G.657.A2 fiber
superior and more consistent optical performance • ACCUMAX fiber optic cables offer flexible and
compared to field termination. Specially trained robust cabling solutions for virtually any indoor
factory technicians cut the cable to customer specified premises application in both the horizontal and
lengths, and carefully connectorize one or both ends vertical distribution environments. Can eliminate
to meet the exact customer requirements. the cost of installing any other inside cable and
is especially suitable for installation in riser shafts,
above drop ceilings, under raised floors or in
conduits.

Ordering Information

Part No. Product Code Material Description

301135414 LPC2-7-SCASCA-BR09-08-025F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 25’

301135422 LPC2-7-SCASCA-BR09-08-050F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 50’

301135430 LPC2-7-SCASCA-BR09-08-075F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 75’

301135448 LPC2-7-SCASCA-BR09-08-100F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 100’

301135455 LPC2-7-SCASCA-BR09-08-125F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 125’

301135463 LPC2-7-SCASCA-BR09-08-150F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 150’

301135471 LPC2-7-SCASCA-BR09-08-175F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 175’

301135489 LPC2-7-SCASCA-BR09-08-200F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 200’

301135497 LPC2-7-SCASCA-BR09-08-300F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 300’

301135505 LPC2-7-SCASCA-BR09-08-400F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 400’

301135513 LPC2-7-SCASCA-BR09-08-500F-39U/18U Assembly, Cable 8 Fiber SC APC to SC APC Indoor Riser 500’

NOTE: Other fiber counts are available upon request.

WWW.OFSOPTICS.COM | 49
 SlimBox™ Solutions Complementary Products
Mechanical SCA Connector for 3.0mm Round Cable

PRODUCT DESCRIPTION FEATURES AND BENEFITS

OFS offers a mechanical SCA connector that provides • Fully compatible with other SC adapters and
quick and easy assembly in the field. The connector connectors
is similar to factory installed SC APC connectors. It • Reduces the need for slack storage
has the familiar push-pull insertion and release that is
• Reduces assembly time
known by most craft personnel. Minimum amount of
tools required and has an easy to follow installation • No polishing or epoxy required
method. The offering is for single-mode connectors • Easy instructions
that can mount on 3.0mm round cable.
• Useful in multiple applications
There are no special tools, epoxy or polishing in the
field.

APPLICATIONS
• Fiber to the Home
• MSO/Broadband/CATV
• Municipal networks

Ordering Information

Part Number Product Code Material Description

301126967 MOCSA-SC-3.0MM-W/TOOL-010 PACK Package of 10 mechanical connectors with tool

for 3.0mm round cable

50 | WWW.OFSOPTICS.COM
 SlimBox™ Solutions Complementary Products
EZ!Fuse™ SCA Splice On Connector for 0.9 mm Fiber and 2.0/3.0 mm Cord

PRODUCT DESCRIPTION
OFS’ new Splice On Connector termination system allows for
easy termination and flexibility in the field. This new “splice-
on” connector (SOC) eliminates the need for field polishing
and significantly improves the quality of the termination and
installation time required. The connector is easily assembled
by using a process that requires minimal skill or training. These
connectors are optimal for use in FTTx application. Both UPC and
APC polishing are available for single-mode optical fiber.
EZ!Fuse Splice On Connector is compatible with the FITEL Fusion
Splicer models Ninja, S179 and S178.

FEATURES AND BENEFITS

• Simple, Fast, and Consistent Field Termination: Allows for
easy field installation of EZ-Bend® cables, pre-terminated
splitters, fan outs, and drop terminals
• No Polishing or Epoxy: OFS’ connector termination process
requires no polishing or epoxy increasing the quality and
consistency of field connector termination. Total installation
time is greatly reduced compared to traditional methods
• Fiber Management: The most difficult task for splicer
operators has always been managing the fiber upon
completion of splicing. The connector termination feature
eliminates the need for splice trays resulting in easier fiber
management, reduced storage requirements, and faster
installation times

Ordering Information

Product Code Description MOQ

FSOC-SC09-SM-U SC Connector, SM UPC Polishing for 250/900 µm Fiber

FSOC-SC23-SM-U SC Connector, SM UPC Polishing for 2/3 mm Cordage

FSOC-SC09-SM-A SC Connector, SM APC Polishing for 250/900 µm Fiber

FSOC-SC23-SM-A SC Connector, SM APC Polishing for 2/3 mm Cordage 10 Connectors:

One S712C-SGS9C-R is supplied with
FSOC-SC09-M3-P SC Connector, OM3 PC Polishing for 250/900 µm Fiber each MOQ of 10 Connectors
FSOC-SC23-M3-P SC Connector, OM3 PC Polishing for 2/3 mm Cordage

FSOC-SC09-M1-P SC Connector, OM1 PC Polishing for 250/900 µm Fiber

FSOC-SC23-M1-P SC Connector, OM1 PC Polishing for 2/3 mm Cordage

WWW.OFSOPTICS.COM | 51
 For additional information please contact your sales representative.
You can also visit our website at www.ofsoptics.com
or call 1-888-FIBER-HELP (1-888-342-3743) from inside the USA
or +1-770-798-5555 from outside the USA.
EMEA Specific: +49 (0) 228 7489 201

InvisiLight, EZ-Bend, ACCUMAX, and M-Pack are registered trademarks of OFS FITEL, LLC. V-Linx, AccuFlex, AccuPack,
EZ!Fuse, and SlimBox are trademarks of OFS FITEL, LLC.
OFS reserves the right to make changes to the prices and product(s) described in this document at any time without notice.
This document is for informational purposes only and is not intended to modify or supplement any OFS warranties or
specifications relating to any of its products or services.
Copyright © 2020 OFS FITEL, LLC
All rights reserved, printed in USA.
OFS Marketing Communications
Date: 02/20