LED TV

Chassis : U73A
Model : UA32EH50*0R
UA40EH50*0R
UA42EH5000R
UA46EH50*0R
UA50EH50*0R
UA22ES500*R

SERVICE Manual

LED TV Contents

1. Precautions

2. Product specifications

3. Disassembly and Reassembly

4. Troubleshooting

5. Wiring Diagram

UA**EH5000R
 Contents
1. Precautions....................................................................................................................1-1
1-1. Safety Precautions...............................................................................................................1-1
1-2. Servicing Precautions...........................................................................................................1-3
1-3. Static Electricity Precautions................................................................................................1-4
1-4. Installation Precautions........................................................................................................1-5
2. Product Specifications.................................................................................................2-1
2-1. Product Information .............................................................................................................2-1
2-2. Detail Factory Option..........................................................................................................2-12
2-3. Accessories........................................................................................................................2-13
3. Disassembly and Reassembly.....................................................................................3-1
3-1. Disassembly and Reassembly.............................................................................................3-1
3-2. Assy Board P-Jog Switch & Ir...............................................................................................3-9
3-3. Disassembly(PTC).............................................................................................................. 3-11
4. Troubleshooting............................................................................................................4-1
4-1. Troubleshooting....................................................................................................................4-1
4-2. How to Check Fault Symptom..............................................................................................4-3
4-3. Factory Mode Adjustments.................................................................................................4-20
4-4. White Balance....................................................................................................................4-29
4-5. White Ratio (Balance) Adjustment......................................................................................4-32
4-6. Software Upgrade...............................................................................................................4-35
5. Wiring Diagram..............................................................................................................5-1
5-1. Wiring Diagram.....................................................................................................................5-1
5-2. Connector.............................................................................................................................5-3
5-3. Connector Functions............................................................................................................5-6
5-4. Cables..................................................................................................................................5-7
This Service Manual is a property of Samsung Electronics Co.,Ltd. © 2012 Samsung Electronics Co.,Ltd.
Any unauthorized use of Manual can be punished under applicable All rights reserved.
International and/or domestic law.
Printed in Korea
 2. Product specifications

2. Product Specifications
2-1. Product Information
2-1-1. Model Comparison
Model UA**EH50*0R
W

Front View H

D
* W : Width H : High D : Depth

Detail View

Front Color Black (Panel)

Set with Stand 738.3 x 498.1 x 191.6 mm
32"
Set without Stand 738.8 x 447.7 x 93.2 mm
Set with Stand 927.6 x 606.5 x 227.6 mm
40"
Set without Stand 927.6 x 554.1 x 93.3 mm

Dimensions Set with Stand 975.0 x 633.7 x 227.6 mm

42"
(W x H x D) Set without Stand 975.0 x 576.9 x 93.0 mm
Set with Stand 1059.8 x 680.3 x 227.6 mm
46"
Set without Stand 1059.8 x 628.2 x 94.3 mm
Set with Stand 1137.6 x 725.0 x 227.6 mm
50"
Set without Stand 1137.6 x 669.4 x 94.5 mm

2-1
2. Product specifications

Model UA**EH50*0R
Set with Stand 6.4 kg
32"
Set without Stand 5.7 kg
Set with Stand 11.0 kg
40"
Set without Stand 9.0 kg
Set with Stand 11.5 kg
Weight 42"
Set without Stand 9.5 kg
Set with Stand 14.0 kg
46"
Set without Stand 12.0 kg
Set with Stand 18. 3 kg
50"
Set without Stand 15. 7 kg
Panel Type Anti Glare
Internal Memory None
DDR 128 Mbtye

Feature Media Play(Movie)

2-2
 2. Product specifications

Model UA22ES500*R

H
Front View

D
* W : Width H : High D : Depth

Detail View

Front Color Black (Panel)

Dimensions Set with Stand 513.4 x 364.4 x 161.0 mm

22"
(W x H x D) Set without Stand 513.4 x 316.2 x 49.6 mm
Set with Stand 3.5 kg
Weight 22"
Set without Stand 3.3 kg
Panel Type Anti Glare
Internal Memory None
DDR 128 Mbtye
Feature Media Play(Movie)

2-3
2. Product specifications

2-1-2. Feature & Specifications

Model UA22ES500*R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 350 cd/m2
• High Contrast Ratio : 1,000:1
• Response Time : 5 ms

Specifications

Item Description
LCD Panel 22 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 80 MHz
Active Display (H x V)*
476.6 (H) x 268.1 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 35 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 513.4 x 364.4 x 161.0 mm
* Width x High x Depth
Set without Stand 513.4 x 316.2 x 49.6 mm
Weight Set with Stand 3.5 kg
Set without Stand 3.3 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 3 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-4
 2. Product specifications

Model UA32EH50*0R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 350 cd/m2
• High Contrast Ratio : 6,900:1
• Response Time : 5.5 ms

Specifications

Item Description
LCD Panel 32 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 80 MHz
Active Display (H x V)*
698.4 (H) x 392.85 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 62 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 738.3 x 498.1 x 191.6 mm
* Width x High x Depth
Set without Stand 738.8 x 447.7 x 93.2 mm
Weight Set with Stand 6.4 kg
Set without Stand 5.7 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-5
2. Product specifications

Model UA40EH50*0R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 350 cd/m2
• High Contrast Ratio : 5,000:1
• Response Time : 5.5 ms

Specifications

Item Description
LCD Panel 40 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 87 MHz
Active Display (H x V)*
885.6 (H) x 498.15 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 83 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 927.6 x 606.5 x 227.6 mm
* Width x High x Depth
Set without Stand 927.6 x 554.1 x 93.3 mm
Weight Set with Stand 11.0 kg
Set without Stand 9.0 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-6
 2. Product specifications

Model UA42EH5000R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 300 cd/m2
• High Contrast Ratio : 3,000:1
• Response Time : 6.5 ms

Specifications

Item Description
LCD Panel 42 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 82 MHz
Active Display (H x V)*
930.24 (H) x 523.26 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 93 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 975.0 x 633.7 x 227.6 mm
* Width x High x Depth
Set without Stand 975.0 x 576.9 x 93.0 mm
Weight Set with Stand 11.5 kg
Set without Stand 9.5 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-7
2. Product specifications

Model UA46EH50*0R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 350 cd/m2
• High Contrast Ratio : 5,000:1
• Response Time : 5.5 ms

Specifications

Item Description
LCD Panel 46 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 80 MHz
Active Display (H x V)*
1018.08 (H) x 572.67 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 92 / 95 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 1059.8 x 680.3 x 227.6 mm
* Width x High x Depth
Set without Stand 1059.8 x 628.2 x 94.3 mm
Weight Set with Stand 14.0 kg
Set without Stand 12.0 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-8
 2. Product specifications

Model UA50EH50*0R

Feature

• ATV, 2-HDMI, 1-Component, 1-A/V, 1-USB2.0(1.5A)

• Brightness : 350 cd/m2
• High Contrast Ratio : 5,000:1
• Response Time : 5.5 ms

Specifications

Item Description
LCD Panel 50 inch FHD
Scanning Frequency Horizontal : 60 kHz ~ 73 kHz (Automatic)
Vertical : 47 Hz ~ 63 Hz (Automatic)
Display Colors 16.7M colors
Maximum Resolution Horizontal : 1920 Pixels
Vertical : 1080 Pixels
Input Signal Analog 0.7 Vp-p ± 5% positive at 75Ω, internally terminated
Input Sync Signal H/V Separate, TTL, P. or N.
Maximum Pixel Clock Rate 80 MHz
Active Display (H x V)*
1095.8 (H) x 616.4 (V) mm
* Horizontal x Vertical

AC Power Voltage & Frequency AC 100 ~ 240 V, 50/60 Hz

Power Consumption 119 W (Under 0.3 W, Stand by)
Dimensions Set (W x H x D)* Set with Stand 1137.6 x 725.0 x 227.6 mm
* Width x High x Depth
Set without Stand 1137.6 x 669.4 x 94.5 mm
Weight Set with Stand 18.3 kg
Set without Stand 15.7 kg
TV System Tunning Frequency Synthesize (Refer to detailed Frequency Table)
System PAL, SECAM, NT4.43
Sound BG, DK, L/L', NICAM, MPEG1, DD, DD+, HH-AAC
Environmental Considerations Operating Temperature : 50˚F ~ 104˚F (10˚C ~ 40˚C)
Operating Humidity : 10% ~ 80%, non-condensing
Storage Temperature : -13˚F ~ 113˚F (-25˚C ~ 45˚C)
Storage Humidity : 5% ~ 95%, non-condensing
Audio Specifications MAX Internal Audio Output Power : Each 10 W(Left/Right)
Equalizer : 5 Band
Output Frequency :
• PG : 20 Hz ~ 15.4 kHz
• AV/Componet/HDMI : 20 Hz ~ 20 kHz
Note: Dolby Digital +, USB2.0(1.5A), Film Mode, Energy Saving

2-9
2. Product specifications

2-1-3. Specification Comparison to Old Models

Model UE5L(UA**E*50**R) LD5K(LA**D550K7R)

Design

Diplay Type FULL-LED TV LCD TV

Built-in Tuner O O
Resolution 1920 x 1080 1920 x 1080
LCD Panel TFT LCD Panel 60 Hz TFT LCD Panel 60 Hz
Screen Size 22"/32"/40"/42"/46"/50" 22"/32"/37"/40"/46"
Picture ratio 16 : 9 16 : 9
22" 35 W (Under 0.3W, Standby) 22" 60 W (Under 0.3W, Standby)
32" 62 W (Under 0.3W, Standby) 32" 110 W (Under 0.3W, Standby)

Power 40" 87 W (Under 0.3W, Standby) 37" 140 W (Under 0.3W, Standby)
Consumption 42" 93 W (Under 0.3W, Standby) 40" 150 W (Under 0.3W, Standby)
46" 92 / 95 W (Under 0.3W, Standby) 46" 210 W (Under 0.3W, Standby)
50" 119 W (Under 0.3W, Standby)
513.4 x 364.4 x 161.0 mm_with stand 543.4 x 395.9 x 171.6 mm_with stand
22" 22"
513.4 x 316.2 x 49.6 mm_without Stand 543.4 x 353.5 x 61.9 mm_without Stand
738.3 x 498.1 x 191.6 mm_with stand 804.7 x 563.7 x 240.0 mm_with stand
32" 32"
738.8 x 447.7 x 93.2 mm_without Stand 804.7 x 507.4 x 80.3 mm_without Stand
927.6 x 606.5 x 227.6 mm_with stand 923.5 x 629.2 x 255.0 mm_with stand
40" 37"
975.0 x 576.9 x 93.0 mm_without Stand 923.5 x 573.2 x 78.5 mm_without Stand
Dimensions
(W x H x V) 975.0 x 633.7 x 227.6 mm_with stand 992.1 x 667.2 x 255.0 mm_with stand
42" 40"
927.6 x 554.1 x 93.3 mm_without Stand 992.1 x 611.0 x 80.4 mm_without Stand
1059.8 x 680.3 x 227.6 mm_with stand 1124.1 x 742.8 x 275.0 mm_with stand
46" 46" 1124.1 x 686.1 x 80.4 mm_without
1059.8 x 628.2 x 94.3 mm_without Stand
Stand
1137.6 x 725.0 x 227.6 mm_with stand
50"
1137.6 x 669.4 x 94.5 mm_without Stand

2-10
 2. Product specifications

Model UE5L(UA**E*50**R) LD5K(LA**D550K7R)

3.5 kg_with Stand 5.2 kg_with stand
22" 22"
3.3 kg_without Stand 5.0 kg_without Stand
6.4 kg_with Stand 11.8 kg_with stand
32" 32"
5.7 kg_without Stand 9.1 kg_without Stand
11.0 kg_with Stand 15.8 kg_with stand
40" 37"
9.0 kg_without Stand 12.55 kg_without Stand
Weight
11.5 kg_with Stand 16.5 kg_with stand
42" 40"
9.5 kg_without Stand 13.25 kg_without Stand
14.0 kg_with Stand 21.7 kg_with stand
46" 46"
12.0 kg_without Stand 18.1 kg_without Stand
18.3 kg_with Stand
50"
15.0 kg_without Stand
22" 250 cd/m2 22" 300 cd/m2
32" 350 cd/m2 32" 480 cd/m2
40" 350 cd/m2 37" 500 cd/m2
Brightness
42" 300 cd/m2 40" 450 cd/m2
46" 350 cd/m2 46" 450 cd/m2
50" 350 cd/m2
22" 1,000:1 22" 1,000:1
32" 6,900:1 32" 6,000:1
40" 5,000:1 37" 5,000:1
Contrast Ratio
42" 3,000:1 40" 5,000:1
46" 5,000:1 46" 5,000:1
50" 5,000:1
Picture Enhancer HyperReal Engine (X9N) HyperReal Engine (X9)
Equalizer 5 Band 5 Band
Auto Volume
O O
Control
Surround Sound Dolby Digital Plus/Pulse Dolby Digital Plus/Pulse
22" : 3 W x 3 W 22" : 3 W x 3 W
Speaker Output
32~50" : 10 W x 10 W 32~46" : 10 W x 10 W
PIP X O
Caption O O
Entertainment
X X
Mode
Game Mode O O
Energy Saving O O
Network X X
Anynet+ X O
Antenna 1(Cable/Air) 1(Cable/Air)

2-11
2. Product specifications

2-2. Detail Factory Option

NOTE

If you replace the main board with new one, please change the factory option as well.
The options you must change are "Type".

Model Name UA22ES500*R UA32EH50*0R UA40EH50*0R

Vendor AMLCD AUO AUO

Panel Code BN07-01044A BN07-01113A BN07-01116A

Spec. LTM215HT04-V DE320BGA-B1 DE400BGA-B1

Vendor POWERNET HANSOE DONGYANG

SMPS Code BN44-00504A BN44-00493B BN44-00496B

Spec. PD23A0T_CPN PD32AVF_CHS PD40AVF_CDY

Chassis
Byte Item - - -
Ass'y
PBA Ass'y BN94-05547T BN94-05547U
0 Factory Reset -
code (AH01) (AD01)

1 Type 22A6TF0E 32L6AF0D 40L6AF0D

2 Model EA_Thai EA_Thai EA_Thai

3 SVC Model EH5000 EH5000 EH5000

4 Local Set EH5000 EH5000 EH5000

5 Tuner - - -

6 Ch Table SUWON SUWON SUWON

Model Name UA42EH5000R UA46EH50*0R UA50EH50*0R

Vendor AUO AUO CHILIN

Panel Code BN07-01239A BN07-01120A BN07-01140A

Spec. DE420BGA-B1 DE460BGA-B1 DE500BGM-C1

Vendor HANSOE HANSOE HANSOL

SMPS Code BN44-00497C BN44-00497B BN44-00499A

Spec. PD42AVF_CHS PD46AVF_CHS PD55AV1_CHS

Chassis
Byte Item - - -
Ass'y
PBA Ass'y BN94-06144B BN94-05547V
0 Factory Reset BN94-05764R
code (AH01) (AH01)

1 Type 42R6AF0D 46L6AF0D 50P6AF0D

2 Model - EA_Thai EA_Thai

3 SVC Model EH5000 EH5000 EH5000

4 Local Set EH5000 EH5000 EH5000

5 Tuner - - -

6 Ch Table SUWON SUWON SUWON

2-12
 2. Product specifications

2-3. Accessories
Product Description Code. No Remark

Remote Control AA59-00607A

Batteries (AAA x 2) 4301-000121

Power Cord 3903-000604

Warranty Card / Registration

Card / Safety Guide Manual BN96-18704V
(Not available in all locations)

Holder-Wire Stand BN61-05491A

Samsung Electronics
Service center
22" BN96-21735F

32" BN96-21735F
Stand
40" BN96-21736E

42" BN96-21736E

46" BN96-21736E

50" BN96-21737D

32" BN96-21741D

40" BN96-21742C

Guide Stand 42" BN96-21742C

46" BN96-21742C

50" BN96-21742C

2-13
 3. Disassembly and Reassemble

3. Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the LED TV.

This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
WARNING

3-1. Disassembly and Reassembly

1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
CAUTION 3. If there is no additional coment, it is same for all inches.

„„ UA**EH50**R

Description Picture Description Screws

1 Place TV face down on cushioned table.

2 Remove 4 screws from the Stand.

6003-001782

3 Remove Stand.

3-1
3. Disassembly and Reassemble

Description Picture Description Screws

4 Remove the 1 screw of Cover Jack.

6003-001782

6003-002755
Remove 9 screws of Cover-Middle.

5 Remove the Cover Jack.

Remove the Cover-Middle.

3-2
 3. Disassembly and Reassemble

Description Picture Description Screws

6 Disconnect the Function Assy Cable.

7 Remove the screws of Rear-Cover.

6003-001782

6003-002755

3-3
3. Disassembly and Reassemble

Description Picture Description Screws

8 Remove the Rear-Cover.

9 Remove the screws of Main Board and

SMPS Board and Panel.

6001-002756

3-4
 3. Disassembly and Reassemble

Description Picture Description Screws

10 Remove the LVDS Cable and Panel Drive

Cable.

11 Remove the Speakers (L/R).

NOTE

46 / 50 inch
If you need to change speakers, you
should ( ) not to fall out something in
the Panel Holds.

12 Completed disassembly.

NOTE

Reassembly procedures are in the reverse order of disassembly procedures.

3-5
3. Disassembly and Reassemble

„„ UA22ES500*R

Description Picture Description Screws

1 Place TV face down on cushioned table.

2 Remove 3 screws from the Stand.

Remove Stand.

NOTE

If you want to remove the only rear 6003-001782

cover, you don`t need to remove the
stand)

3 Remove 5 screws of Rear-Cover.

6003-001782

4 Lift up the Rear-Cover.

5 Separate the Left/Right Speaker, Cables.

3-6
 3. Disassembly and Reassemble

Description Picture Description Screws

6 Remove the screws of Main Board and

SMPS Board.
• Remove the 4 screws of Main Board.
• Remove the 3 screws of SMPS Board.

NOTE 6001-002756
(Machine)
• If you need, Side Bracket also.
• If you want to change the only Panel,
you don`t need to separate Boards
and cables (except LVDS).

7 Lift up the Panel.

NOTE

If you re-assemble, you should keep the

stop-point.

NOTE

Reassembly procedures are in the reverse order of disassembly procedures.

3-7
3. Disassembly and Reassemble

„„ Screw Size

Code No. COLOR A (mm) B (mm) C (mm)

6003-001782 BLACK 7.80~8.30 11.20~12.00 3.81~3.91

6001-002755 BLACK 7.1~7.5 5.7~6.0 2.98~3.02

6001-002756 WHITE 7.1~7.5 5.7~6.0 2.98~3.02

3-8
 3. Disassembly and Reassemble

3-2. Assy Board P-Jog Switch & Ir

„„ How to disassembly

Description Picture Description Refer

1 Check the 2 Locking Holders.

2 Press both holders.

3 Remove the Function Assy.

3-9
3. Disassembly and Reassemble

„„ How to assembly

Description Picture Description Refer

1 Check the locking hole.

2 Combine the function assy to locking hole.

3 Press the function assy to TV.

When you want to ignore the funtion key actions

Option
Control Config Option Navigation Key Func 0 : New Function (Naviagtion) Key [ Default ]
1 : Old Function (Touch) Key
SVC
2 : Do not work Function key
Expert
ADC/WB
Advanced

3-10
 3. Disassembly and Reassemble

3-3. Disassembly(PTC)
„„ How to disassembly

Description Picture Description Refer

1 Place TV face up on cushioned table.

2 Remove the ASSY Function assy.

3 Spread the both sides of PTC upper

(marked "▼") by use the tool.

CAUTION

Do not scratch on both side by use tool.

Gate Cof will be damaged.

3-11
3. Disassembly and Reassemble

Description Picture Description Refer

4 Separate the left and right side of the PTC

as shown.

5 Separate the Bottom of the PTC as shown

6 Raise up the PTC Bottom.

7 Disassembly is complete.

3-12
 3. Disassembly and Reassemble

„„ How to reassembly

Description Picture Description Refer

1 Attach the PTC Bottom first to the Panel.

2 Secure the plastic latch on the left and right

side of the PTC as shown.

3-13
3. Disassembly and Reassemble

Description Picture Description Refer

3 Visually inspect the spacing between the

PTC and the Panel for equal clearance.

CAUTION

Combine to stick the PTC Rib into the

middle mold.

3-14
 3. Disassembly and Reassemble

Description Picture Description Refer

4 Assembly is complete.

3-15
 4. Troubleshooting

4. Troubleshooting
4-1. Troubleshooting
„„ Previous Check
1. Check the various cable connections first.
-- Check to see if there is a burnt or damaged cable.
-- Check to see if there is a disconnected or loose cable connection.
-- Check to see if the cables are connected according to the connection diagram.
2. Check the power input to the Main Board.
UA22ES500*R

LVDS Cable

14P Cable
Power Ass’y Main Ass’y

Speaker

UA**EH50*0R

Power Ass’y
Main Ass’y
14P Cable

LVDS Cable

Speaker

4-1
4. Troubleshooting

Main Ass’y (CN204_L, CN203_S) Power Ass’y (CMN801)

13 B13V 14 B13V 14 B13V 13 B13V
11 B13V 12 B13V 12 B13V 11 B13V
9 B13VS 10 SW_INV 10 SW_INV 9 B13VS
7 B13VS 8 GND 8 GND 7 B13VS
5 GND 6 GND 6 GND 5 GND
3 B5.3V 4 A5.3V 4 A5.3V 3 B5.3V
1 B5.3V 2 SW_PW 2 SW_PW 1 B5.3V

* Change the 12 PIN to B13V(2012) from NC(2011)

3. Check the power in & output between IP & Main Board, Main Board & Panel, IP & Panel.

„„ How to know it is from Main Board or T-Con when some problems happen
1. No Picture : Backlight is on, but there is no picture and LED indicator in front of TV is blinking.
-- Check the LVDS Cable connection. If still problems, change the T-Con Board and then Main Board step by step.
2. Picture distortion : Enter the service mode ⇢ Choose ‘SVC’ ⇢ Check the ‘internal pattern.’
-- Enter ‘Service Mode.’
• If you do not have Factory remote control

Power OFF MUTE 1 8 2 Power On

• If you have Factory remote control

INFO Factory
3. Choose ‘SVC.’
4. Choose ‘Test pattern.’
5. Select the each pattern and then check all pattern is ok or not.

Option
Control
SVC Test Pattern Mstar Test Pattern
Expert

ADC/WB
Advanced

Pattern Status is Change the Test Pattern is made by the MSTAR IC

OK Main Board We guess front of MSTAR IC has problem.
NG Panel and T-Con Board We guess back of MSATR IC has problem.

4-2
 4. Troubleshooting

4-2. How to Check Fault Symptom

„„ No Power
• The PD board relay does not work when connecting the power cord.
Symptom
• The units appears to be dead.
The PD relay does not work when connecting the power cord if the cables are improperly connected
or the Main Board or PD is not functioning. In this case, check the following:
Major Check the internal cable connection status inside the unit.
checkpoints • Check the fuses of each part.
• Check the output voltage of PD.
• Replace the Main Board.

Power indicator LED on? No Check an AC power connection.

Yes

Check the backlight on, when 14p cable

No Change 14p power cable or SMPS.
unconnected ?

Yes

Check ‘Stand-By 5V’ DCA5V appear at?

1 No Change SMPS.
BD216_L/BD210_S ?

Yes

Check ‘SW_POWER Voltage’ is under

2 No Change Main Ass’y.
0.5V at Q202 base ?

Yes

Diagnostics Check ‘Power input of Main Ass’y’ DC

3 B13V, B5V appear at?
No Change SMPS.
4 BD219_L/BD213_S(B13V)
BD215_L/BD209_S(B5V)?

Yes

Check ‘Power of nand flash IC(A3.3V)’ and

check ‘Power of main IC(B1.2V, B2.5V)’
and check ‘Power of DDR IC(B1.5V)’
5 appear at ?
No
6 TP_A3.3V/IC901(#1,2)
TP_B1.2V/BD1002 (B1.2V)
TP_B2.5V/BD1003/4/5/6 (B2.5V)
TP_B1.5V/BD1012 (B1.5V) Change Main Ass’y.

Yes

Check ‘Power of LVDS (13V)’ appear at

7 LVDS connector Pin #1~5? No
TP-Panel_VCC

4-3
4. Troubleshooting

Yes

Check the LVDS cable?

Check the T-Con B’d? No Please, Contact Tech support.
Replace the LCD panel?

Caution Make sure to disconnect the power before working on the IP Board.

4-4
 4. Troubleshooting

„„ Location of Parts

Main Board_Front

Detail Image

Q202_Base BD1012 BD219_L

(B1.5V) (B13V)
TP-B1.2V

A BD1002 B TP-PANEL_VCC
(B1.2V)

TP-A3.3V
IC901 #1, 2 BD216_L BD215_L
(A3.3V) (A5V) (B5V)

BD1004/5/6
(B2.5V) TP-B2.5V

C
BD1003
(B2.5V)

4-5
4. Troubleshooting

„„ Waveforms

1 Stand-By A5.3V 2 SW_POWER

3 B13V 4 B5.3V

5 B1.2V 6 B2.5V

4-6
 4. Troubleshooting

7 PANEL VCC

4-7
4. Troubleshooting

„„ No video (HDMI1, 2 - Digital signal)

Symptom Audio is normal but no picture is displayed on the screen.

• Check the HDMI source

Major • Check the X9N
checkpoints • This may happen when the LVDS cable connecting the Main Board and the Panel is
disconnected.

Power indicator LED is off.

No Check a set in the ‘Stand-by mode’.
Lamp(Backlight) on, no video ?

Yes

Check the Self Diagnosis (Support ⇢

Check external devices and
Self Diagnosis ⇢ Picture Test) Dose the No
connections.
promblem still exist self diagnosis?

Yes

Check the HDMI source and check the

No Input the HDMI signal properly.
connection of HDMI cable ?
Diagnostics
Yes

Does the signal appear at ?

Check CN502, CN501_H2 and
CN502(Pin #1&3,4&6,7&9,12&10)(HDMI1)
3 No Check HDMI cable.
CN501_H2(Pin #1&3 ,4&6, 7&9, 12&10)
Change the Main Ass’y.
(HDMI2) (HDMI RX_Clk, RX_Data)

Yes

Check the LVDS cable?

Check the T-Con B’d? No Please, Contact Tech support.
Replace the LCD panel?

Caution Make sure to disconnect the power before working on the IP Board.

4-8
 4. Troubleshooting

„„ Location of Parts

Main Board_Front

Detail Image

#10 #7 #4 #1

#12 #9 #6 #3
ODDCLK-S EVENCLK-S
A B

ODDCLK+S EVENCLK+S

4-9
4. Troubleshooting

„„ Waveforms

3 HDMI input (RX_Data, RX_Clk) 2 LVDS output

4-10
 4. Troubleshooting

„„ No video (Tuner_CVBS)
Symptom Audio is normal but no picture is displayed on the screen.

• Check the Tuner CVBS source

Major • Check the X9N
checkpoints • This may happen when the LVDS cable connecting the Main Board and the Panel is
disconnected.

Power indicator LED is off.

No Check a set in the ‘Stand-by mode’.
Lamp(Backlight) on, no video ?

Yes

Check the RF source and check the

No Input the RF source properly.
connection of RF cable ?

Yes

Check the Self Diagnosis (Support ⇢

Check external devices and
Self Diagnosis ⇢ Picture Test) Dose the No
connections.
promblem still exist self diagnosis?

Diagnostics Yes

Does the DC B3.3V, B1.8V appear at

No Change the Main Ass’y.
#4(BD607), #2(BD604) Pin of Tuner ?

Yes

Check the CVBS data at #10 Pin of Tuner? No Change the Main Ass’y.

Yes

Check the LVDS cable?

Check the T-Con B’d? No Please, Contact Tech support.
Replace the LCD panel?

Caution Make sure to disconnect the power before working on the IP Board.

4-11
4. Troubleshooting

„„ Location of Parts

Main Board_Front

Detail Image

BD607
(B3.3V)
BD604
(B1.8V)
ODDCLK-S EVENCLK-S
A B
#5 (B3.3V) #2 (B1.8V)
ODDCLK+S EVENCLK+S

4-12
 4. Troubleshooting

„„ Waveforms

2 LVDS output

4-13
4. Troubleshooting

„„ No video (Video CVBS, COMPONENT)

Symptom Audio is normal but no picture is displayed on the screen.

• Check the Video CVBS source and Component source.

Major
checkpoints • This may happen when the LVDS cable connecting the Main Board and the Panel is
disconnected.

Power indicator LED is off.

No Check a set in the ‘Stand-by mode’.
Lamp(Backlight) on, no video ?

Yes

Check the video source and check the

No Input the video source properly.
connection of video cable?

Yes

Check the Self Diagnosis (Support ⇢

Check external devices and
Self Diagnosis ⇢ Picture Test) Dose the No
connections.
promblem still exist self diagnosis?

Yes

Diagnostics
Check the ident status of the input source?
4 (High : Ident, LOW : not Ident) TP-av1_ID, No
TP-COMP1_ID

Yes Check CN403.

Change the Main Ass’y.
Does the input data appear at?
R806/R810(COMP1_Y/CVBS1)
5 No
R804(COMP1_PR)
R808(COMP2_PB)

Yes

Check the LVDS cable?

Check the T-Con B’d? No Please, Contact Tech support.
Replace the LCD panel?

Caution Make sure to disconnect the power before working on the IP Board.

4-14
 4. Troubleshooting

„„ Location of Parts

Main Board_Front

Detail Image

ODDCLK-S EVENCLK-S
A B
R804
R808
ODDCLK+S EVENCLK+S
R806
R810

4-15
4. Troubleshooting

„„ Waveforms

4 Input data(CVBS) 5 Compnent_Y (Gray scale) / Pb / Pr (Color bar)

5 Compnent_Y (Gray scale) / Pb / Pr (Color bar) 2 LVDS output

4-16
 4. Troubleshooting

„„ No sound
Symptom Video is normal but there is no sound.

• When the speaker connectors are disconnected or damaged.

Major
• When the sound processing part of the Main Board is not functioning.
checkpoints
• Speaker defect.

Check the source and check the

connection of sound cable? No Input the sound source properly.
(Comp/PC/DVI to HDMI)

Yes

Check the Self Diagnosis (Support ⇢

Check external devices and
Self Diagnosis ⇢ Picture Test) Dose the No
connections.
promblem still exist self diagnosis?

Yes

Does the sound data appear at?

Check CN403, CN402_PC.
R403/R405 (AV1, COMP1) No
Change the Main Ass’y.
R428_PC/R429_PC(PC/DVI)
Diagnostics
Yes

Does the DC B12_18VS appear at?

No Change the Main Ass’y.
BD217_L/BD211_S?

Yes

Check IC1001.
Does the sound data appear at?
7 No Check IC301 (Sound AMP).
- L-, L+, R-, R+
Change the Main Ass’y.

Yes

Replace speaker. No Please, Contact Tech support.

Caution Make sure to disconnect the power before working on the IP Board.

4-17
4. Troubleshooting

„„ Location of Parts

Main Board_Front

Detail Image

L- R-
R406 R405

A R428_PC B L+ R+

R428_PC

C BD217_L

4-18
 4. Troubleshooting

„„ Waveforms

7 Speaker out

4-19
4. Troubleshooting

4-3. Factory Mode Adjustments

4-3-1. Entering Factory Mode
To enter ‘Service Mode’ Press the remote -control keys in this sequence :
• If you do not have Factory remote control

Power OFF MENU 1 8 2 Power On

• If you have Factory remote control

INFO Factory
• If you don’t have Factory remote control, can’t control some menus. (Expert, Advanced menu)

Option T-MX9FMASC-**** : FHD S/W

DTP-LP3-****
Control
DTP-LP3-App-****
SVC
OPTION:32L6AH0D, THAI, 4000, NONE
Expert FactoryCS:*********
ADC/WB ADC : HDMI / COMP / PC / AV /
EDID : SUCCESS
Advanced
HDCP : SUCCESS
BuildDate : **-**-****

• How to enter the hidden factory mode.

1. Into the factory mode.
2. Move the tap to Advanced.
3. Key input : 0 + 0 + 0 + 0.

NOTE

hidden menu : Advanced

4-20
 4. Troubleshooting

4-3-2. Factory Data

Note

• Black : I should not be possible to adjust or change that does not require a change item
Blue : Adjustment Services for the corresponding
Red : Items that are secured

„„ Option
Factory Menu Name Data Range Remark Key
Factory Reset - -

Type 22A6TF0E
32L6AF0D
40L6AF0D
42R6AF0D
46L6AF0D
50P6AF0D

Model UE5000 E4000/E4030/E4050/E4800/

E5000/E5010/E5030/E5050/
E5100/E6000/E6050/E420/
E4080/E5080/E3900/E4900/
E5005/E450

SVC Model 5000

Local Set Thai Viet/Thai/Ina/India/Middle Asia/

East Asia/Philippine/

Tuner SI_ATSC2 do not change

Ch Table SUWON

Front Color NONE NONE/S-C-BLK/S-R-BLK/S-

BLK/T-R-BLK/T-C-BLK/S-B-
BLK

„„ Control
Factory Menu Name Data Range Remark Key
EDID

EDID ON/OFF Off On/Off

EDID WRITE ALL Success/Failure use to write the EDID

EDID WRITE PC Success/Failure

EDID WRITE DVI Success/Failure

EDID WRITE HDMI1 Success/Failure

EDID WRITE HDMI2 Success/Failure

EDID WRITE HDMI3 Success/Failure

EDID WRITE HDMI4 Success/Failure

EDID VERSION HDMI 1.3/HDMI1/2

Sub Option

Mute Time(VIDEO) 4 0~10

ready Off On/Off

4-21
4. Troubleshooting

Factory Menu Name Data Range Remark Key

TTX LIST Flof Flof/List

TTX Group Lang OSD Lang OSD/W Europe/E

Europe/Russia/Greek/Turkey/
Arab/Farsi/ArabHbrw

HotPlug On

Hotplugcontrol On

Spread Spectrum

Spread Spectrum On On/Off

Period 60K 40K/50K/60K

Amplitude 2 0/0.5/1/1.5/2

DDR Spread 2% Off/1%/2%

FRC LVDS Spread On

FRC LVDS Period 30K

FRC LVDS Amplitude 1.0%

FRC DDR Spread On

FRC DDR Period 30K

FRC DDR Ampliture 1.0%

Auto Power On

Mirror ON ON/ OFF

HDMI EQ1 Middle Low/Middle/High/Strong

HDMI EQ2 Middle Low/Middle/High/Strong

use to solve HDMI
HDMI EQ3 Middle Low/Middle/High/Strong Noise

HDMI EQ4 Middle Low/Middle/High/Strong

EER Count -

WM Calib

Panel Enter Key

Panel Display Time 9Hr

Checksum XXXX

View Log

Font Data Viewer

Dimm Type EXT

Carrier Mute Off On/Off

Anynet+ Off On/Off

HPD Polarity

High Devi Off On/Off

Hot Plug Delay 12 0~63

HP Ident High High/Low

PC Ident On On/Off

4-22
 4. Troubleshooting

Factory Menu Name Data Range Remark Key

Watchdog On On/Off

FRC LVDS Order DCAB

FRC Auto Recovery Off

LVDS Format JEIDA JEIDA / VESA

OSD Resolution 1366*768

Bus Stop

OTA Code

OTA Duration Test

Alternate Del

Watch Dog Count 0 -

E-POP Default Off

Energy Star Off

PDP Option

Hotel Option

Shop Option

Shop Mode ON/OFF

USB DEMO ON(SEC)

USB DEMO OFF(SEC)

Exhibition Mode ON/OFF

Asia Option

TTX On ON/OFF

China HD

NT Conversion Off ON/OFF

Sepco 120Hz

Mono Last Memory

H Shaking

India Sound Off ON/OFF

Sound

Audio Amp NTP7412s NTP7412s/NTP7411s do not change

Volume Curve EA EU/EA do not change

FM Prescale 48 0~80

Nicam Prescale 31 0~80

A2 M2S Threshold 0x00 0x00~0xFF

A2 S2M Threshold 0x00 0x00~0xFF

A2 PilotPhaseOn 0x00 0x00~0xFF

A2 PilotPhaseOff 0x00 0x00~0xFF

A2 IdentOn 0x00 0x00~0xFF

4-23
4. Troubleshooting

Factory Menu Name Data Range Remark Key

A2 IdentOff 0x00 0x00~0xFF

A2 Carr2AmpOnThr 0x00 0x00~0xFF

A2 Carr2AmpOffThr 0x00 0x00~0xFF

A2 Carr2NsrOnThr 0x00 0x00~0xFF

A2 Carr2NsrOffThr 0x00 0x00~0xFF

Nicam Sig Error On 0x00 0x00~0xFF

Nicam Sig Error Off 0x00 0x00~0xFF

DTV Level -12dB

Audio Delay 20ms 0~150ms

Main Amp Master Vol 199

Center Amp Master Vol 199

Woofer Amp Master Vol 199

Main Amp PWM Mod 142 0~255

Center Amp PWM Mod 103

Woofer Amp PWM Mod 103

Woofer Type 0 0~8

Main Speaker EQ On On/Off

Center Speaker EQ On

Woofer EQ On

Main EQ CS -

Center EQ CS -

Woofer EQ CS -

Config Option

Num of AV 1 0~3

Num of PC 0 1~3

Num of Comp 1 1~3

Num of HDMI 2 0~4

Num of SCART 0

DVI Sound 0 0~1

Number of HeadPhone 1 0~1

Num of USB Port

Num of SPDIF OUT 0 0~1

LNA SUPPORT Off On/Off

Navigation Key Func 5Way 5Way : New function

(Navigation jog) Key

Old : Old function (Touch) Key

Eco Sensor Support Off On/OFF

MFT OFFSET

4-24
 4. Troubleshooting

Factory Menu Name Data Range Remark Key

SIL2165FW1128

„„ SVC
Factory Menu Name Data Range Remark Key
Test pattern

Mstar Test Pattern Off Off/0~13

FBE Test Pattern

LOGIC Test Pattern Off Off/0~31

FRC Post Pattern Off

FRC Pre Pattern Off

FRC PC Mode Off

T-CON Download

„„ ADC/WB
Factory Menu Name Data Range Remark Key
ADC

AV Calibration Success Success / Failure

Comp Calibration Success Success / Failure

PC Calibration Success Success / Failure

HDMI Calibration Success Success / Failure

ADC Target

1st_AV_Low 18 0~255

1st_AV_High 220 0~255

1st_AV_Delta 1 0~255

1st_COMP_Low 16 0~255

1st_COMP_High 235 0~255

1st_COMP_Delta 1 0~255

1st_PC_Low 2 0~255

1st_PC_High 235 0~255

1st_PC_Delta 1 0~255

2nd_Low 1 0~255

2nd_High 235 0~255

2nd_Delta 1 0~255

ADC Result

1st_AV_Gain 121

1st_AV_Offset 141

1st_Comp_Gain 70

1st_Comp_Gain_Cb 70

4-25
4. Troubleshooting

Factory Menu Name Data Range Remark Key

1st_Comp_Gain_cr 70

1st_Comp_Offset 127

1st_Comp_Offset_Cb 127

1st_Comp_Offset_Cr 127

1st_PC_R_Gain 94

1st_PC_G_Gain 93

1st_PC_B_Gatin 94

1st_PC_R_Offset 127

1st_PC_G_Offset 127

1st_PC_B_Offset 127

2nd_R_Offset 113 0~255

2nd_G_Offset 113 0~255

2nd_B_Offset 113 0~255

2nd_R_Gain 144 0~255

2nd_G_Gain 144 0~255

2nd_B_Gain 144 0~255

WB

Sub Brightness 128 0~255

R_Offset 128 0~255

G_Offset 128 0~255

B_Offset 128 0~255

Sub Contrast 128 0~255

R_Gain 128 0~255

G_Gain 128 0~255

B_Gain 128 0~255

Movie R Offset 133 0~255

Movie B Offset 129 0~255

Movie R Gain 131 0~255

Movie B Gain 64 0~255

„„ Advanced
Factory Menu Name Data Range Remark Key
PBE

WB Movie

Mode Off On/Off

Color Mode Movie

Color Tone Cool

Msub Brigh 128

4-26
 4. Troubleshooting

Factory Menu Name Data Range Remark Key

Msub Contr 128

W1_RGAIN 138

W1_BGAIN 104

W1_ROFFS 130

W1_BOFFS 127

W2_RGAIN 131

W2_BGAIN 64

W2_ROFFS 133

W2_BOFFS 129

W3_RGAIN 128

W3_BGAIN 128

W3_ROFFS 128

W3_BOFFS 128

N_RGAIN 131

N_BGAIN 122

N_ROFFS 128

N_BOFFS 129

Movie Countr 100

Movie Brigh 45

Movie Color 55

Movie Sharp 55

Movie Tint 50

Movie BkLight 10

M.Gamma Off

M_Sub Gamma 0

EPA Standard

Std Contr 100 0~100

Std Bright 45 0~100

Std Sharp 50 0~100

Std Color 50 0~100

Std Tint 50 0~100

Std Backight 8 0~10

ADJUST

Dynamic Dimming Off On/Off

Power Key Protects Off On/Off

UART Select Auto Wall Auto Wall/Debug/MDC/On1/

On2

4-27
4. Troubleshooting

Factory Menu Name Data Range Remark Key

Debug Mode Debug Off Debug Off/Debug Smart/Debug
RunTime

Back End Mute

PDP FRC

VisualTEST Plus Disable

Standby Mode Time 45 Min 2 Min/45 Min

Delete alt.ver 1 Flash

OTA confirm Time 90 Min 3 Min/90 Min

OTA limit Time 3 Hour 3 Min/3Hour

Dynamic CE Off On/Off

FWC Off On/Off

1080p 48Hz On On/Off

PWM Max 100 1~100

PWM Max2 95 1~100

PWM Mid 10 0~10

PWM Min 0 0~10

COMP PHASW 110

Quick Start

DTV LNA Auto On/Off

HDCP Download Off On/Off

USB Download Off On/Off

LED Peak OnOFF

COLOR MAPPING

WCE

SHARPNESS

ENHANCE

LNA_Plus

FCC

PC_Picture

FRC

PQ OTHERS

7.5 IRE NTSC OFF ON/OFF

7.5 IRE OFFSET 16 0~60

EEPROM RESET

4-28
 4. Troubleshooting

4-4. White Balance

4-4-1. Calibration
1. Into the Factory Mode.
2. Select SVC Menu.
3. Select ADC/WB menu.
4. Select ADC menu.

Option
Control
SVC
Expert
ADC/WB ADC AV Calibration
Comp Calibration
Advanced
PC Calibration
HDMI Calibration

4-4-2. Service Adjustment

You must perform Calibration in the Lattice Pattern before adjusting the White Balance.

„„ Color Calibration
• Adjust Specification
Source Setting Mode Pattern Use Equipment
HDMI 1280 x 720@60 Hz Pattern #24 (Chess Pattern) CA210 & Master MSPG925 Generator

(Chess Pattern)

-- Use other equipment only after comparing the result with that of the Master equipment.

Input mode Calibration Pattern

CVBS IN (Model_#1) Perform in NTSC B&W Pattern #24 Lattice
Component IN (Model_#6) Perform in 720p B&W Pattern #24 Lattice
PC Analog IN (Model_#21) Perform in VESA XGA (1024x768) B&W Pattern #24 Lattice
HDMI IN Perform in 720p B&W Pattern #24 Lattice

4-29
4. Troubleshooting

„„ Method of Color Calibration (AV)

1. Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port.
2. Press the Source key to switch to “AV1” mode.
3. Enter Service mode.
4. Select the “ADC” menu.
5. Select the “AV Calibration” menu.
6. In “AV Calibration Off” status, press the “► ” key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the “AV Calibration” status from Failure to Success.

„„ Method of Color Calibration (Component)

1. Apply the 720p Lattice (N0. 6) pattern signal to the Component IN 1 port.
2. Press the Source key to switch to “Component1” mode.
3. Enter Service mode.
4. Select the “ADC” menu.
5. Select the “Comp Calibration” menu.
6. In “Comp Calibration Off” status, press the “ ►” key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the “Comp Calibration” status from Failure to Success.

„„ Method of Color Calibration (PC)

1. Apply the VESA XGA Lattice (N0. 21) pattern signal to the PC IN port.
2. Press the Source key to switch to “PC” mode.
3. Enter Service mode.
4. Select the “ADC” menu.
5. Select the “PC Calibration” menu.
6. In “PC Calibration Off” status, press the “ ►” key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the “PC Calibration” status from Failure to Success.

„„ Method of Color Calibration (HDMI)

1. Apply the 720p Lattice (N0. 6) pattern signal to the HDMI1/DVI IN port.
2. Press the Source key to switch to “HDMI1” mode.
3. Enter Service mode.
4. Select the “ADC” menu.
5. Select the “HDMI Calibration” menu.
6. In “HDMI Calibration Off” status, press the “►” key to perform Calibration.
7. When Calibration is complete, it returns to the high-level menu.
8. You can see the change of the “HDMI Calibration” status from Failure to Success.

4-30
 4. Troubleshooting

4-4-3. Adjustment
1. Into the Factory Mode.
2. Select SVC Menu.
3. Select ADC/WB menu.
4. Select White Balance menu.

Option
Control
SVC
Expert (low light) (hight light)

ADC/WB White Balance Sub Brightness Sub Contrast

R offset R gain
Advanced
G offset G gain
B offset B gain

4-31
4. Troubleshooting

4-5. White Ratio (Balance) Adjustment

1. You can adjust the white ratio in factory mode (1:Calibration, 3:White-Balance).
2. Since the adjustment value and the data value vary depending on the input source, you have to adjust these in CVBS,
Component 1 and HDMI 1 modes.
3. The optimal values for each mode are configured by default. It varies with Panel’s size and Specification.

• Equipment : CS-210
• Pattern: MIK K-7256 #92 “Flat W/B Pattern" as standard
• Altenate Equipmet : CA200& anyone Master supported
pattern#92(refer to right photo)
• Use other Equipment only after comparing the result
with that of the Master equipment.
• Set Aging time : 60 min

Calibration and Manual setting for WB adjustment

• HDMI : Calibration at #24 Chessboard Pattern Manual adjustment at #92 pattern (720p)
• COMP: Calibration at #24 Chessboard Pattern Manual adjustment at #92 pattern (720p)
• CVBS: Calibration at #24 Chessboard Pattern Manual adjustment at #92 pattern (NTSC)

Note

If finishing in HDMI mode, adjustment coordinate is almost same in AV/COMP mode.

White Balance Manual adjustment

• UA22ES500*R
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 281 Hy 281 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx - Hy - HY -
MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 128 Sub Bright 128

R-Gain 121 G-Gain 128 B-Gain 172
R-Offset 128 G-Offset 128 B-Offset 128

4-32
 4. Troubleshooting

• UA32EH50*0R - AUO
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 264 Hy 274 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx 318 Hy 340 HY -

MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 135 Sub Bright 128

R-Gain ADJ G-Gain 128 B-Gain ADJ
R-Offset 128 G-Offset 128 B-Offset 128

• UA40EH50*0R - AUO
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 264 Hy 274 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx 318 Hy 340 HY -

MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 135 Sub Bright 128

R-Gain ADJ G-Gain 128 B-Gain ADJ
R-Offset 128 G-Offset 128 B-Offset 128

• UA42EH5000R - AUO
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 264 Hy 274 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx 318 Hy 340 HY -

MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 135 Sub Bright 128

R-Gain ADJ G-Gain 128 B-Gain ADJ
R-Offset 128 G-Offset 128 B-Offset 128

4-33
4. Troubleshooting

• UA46EH50*0R - AUO
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 264 Hy 274 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx 318 Hy 340 HY -

MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 135 Sub Bright 128

R-Gain ADJ G-Gain 128 B-Gain ADJ
R-Offset 128 G-Offset 128 B-Offset 128

• UA50EH50*0R
P-Mode
Section Adjustment Coordinate CA-210
Input source

HDMI W/B High Hx 264 Hy 274 HY -

COMP
VIDEO W/B Low Lx - Ly - LY -

W/B High Hx 318 Hy 340 HY -

MOVIE
W/B Low Lx - Ly - LY -
-- Fixed Parameter

Sub Contrast 135 Sub Bright 128

R-Gain ADJ G-Gain 128 B-Gain ADJ
R-Offset 128 G-Offset 128 B-Offset 128

4-34
 4. Troubleshooting

4-6. Software Upgrade

Software Upgrade can be performed by downloading the. latest firmware from samsung.com to a USB memory device.
• Current Version - The software already installed in the TV.
• Software is represented as ‘Year/Month/Day_Version’.

4-6-1. How to Check the Software Version

„„ Use the Main Menu
1. Click the "MENU" key in remote controller.
2. Select "Support" menu.
3. Locate the menu cursor "Software Upgrade" menu.
4. Click the "INFO" key.
-- Check the Main SW and Micom version.

„„ Use the Factory Mode

Option T-MX9HMAFC(AFRICA)/T-MX9HMASC(ASIA)/
T-MX9HMCHC(CHINA)-**** : HD S/W
Control
DTP-LP3-****
SVC
DTP-LP3-App-****
Expert OPTION:32L6AH0D, THAI, 4000, NONE
ADC/WB FactoryCS:*********
ADC : HDMI / COMP / PC / AV /
Advanced
EDID : SUCCESS
HDCP : SUCCESS
BuildDate : **-**-****

4-35
4. Troubleshooting

4-6-2. How to Upgade Software and Micom

1. Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.

Note

Please be careful not to disconnect the power or remove the USB drive while upgrades are being applied.
2. The TV will turn off and turn on automatically after completing the firmware upgrade.
3. Please check the firmware version after the upgrades are complete.
-- the new version will have a higher number than the older version.

Note

• When software is upgraded, video and audio settings you have made will return to their default (factory)
settings.
• We recommend you write down your settings before beginning firmware update.
4. After update is completed, restore your previous settings.

„„ Main Software Upgrade

1. Store the sw program named "T-MX9FMASC(FHD), T-MX9HMAFC(AFRICA)/
T-MX9HMASC(ASIA)/T-MX9HMCHC(CHINA)[HD]" in USB memory stick.
-- Connect the USB.

2. Click the "MENU" key in Remote Controler.

3. Select "Support" menu.

Locate the menu cursor "Software Upgrade" menu.

4. Click the "ENTER" key.

5. Click the "ENTER" key.

-- Wait for upgrade complete.
-- Check the Software Version.

4-36
 Panel Inverter „„ UA**EH50*0R

Main Board
5-1. Wiring Diagram
5. Wiring Diagram

IP Board

CN204_L

CN1301_L_FHD

CN702 CN302

T-CON

Speaker Speaker

FUNCTION& IR
5. Wiring Diagram

5-1
5-2
T-CON
5. Wiring Diagram

„„ UA22ES500*R

IP Board

Main Board

CN203_S CN1303_S_FHD

CN702 CN302

Panel Inverter
Speaker Speaker

FUNCTION& IR
 5. Wiring Diagram

5-2. Connector

1-3
2-2 4-3
2-1

1-4

7-1 7-2

1-1

1-2
8-1 6

7 9
8-2
5

11
3 4-1 4-2 10

1-1 CN1302_L_HD(to Panel) 1-2 CN1301_L_FHD (to Panel)

1 PANEL_VCC 16 ODD_CLK+ 1 NC 18 GDN
2 PANEL_VCC 17 ODD_CLK- 2 GND 19 EVENCLK+
3 PANEL_VCC 18 GND 3 FRC_SDA 20 EVENCLK-
4 PANEL_VCC 19 ODD2+ 4 FRC_PWM1 21 GND
5 PANEL_VCC 20 ODD2- 5 FRC_SCL 22 EVEN2+
6 GND 21 GND 6 FRC_RESET 23 EVEN2-
7 GND 22 ODD1+ 7 LVDS_FORMAT 24 EVEN1+
8 GND 23 ODD1- 8 TCON_SDA 25 EVEN1-
9 WP_PANEL 24 GND 9 TCON_WP 26 EVEN0+
10 LVDS_FORMAT 25 ODD0+ 10 NC 27 EVEN0-
11 NC 26 ODD0- 11 UPDATE_CHECK 28 GND
12 GND 27 GND 12 TCON_SCL 29 ODD4+
13 ODD3+ 28 SDA 13 GND 30 ODD4-
14 ODD3- 29 SCL 14 EVEN4+ 31 ODD3+
15 GND 30 NC 15 EVEN4- 32 ODD3-
16 EVEN3+ 33 GND
17 EVEN3- 34 ODD_CLK+

5-3
5. Wiring Diagram

1-2 CN1301_L_FHD (to Panel) 2-1 CN204_L (to Power board)

35 ODD_CLK- 44 GND 1 B5V 8 GND
36 GND 45 GND 2 SW_POWER 9 B13VS
37 ODD2+ 46 NC 3 B5V 10 SW_INVERTER
38 ODD2- 47 PANEL_VCC 4 A5V 11 B13V
39 ODD1+ 48 PANEL_VCC 5 GND 12 B13V
40 ODD1- 49 PANEL_VCC 6 GND 13 B13V
41 ODD0+ 50 PANEL_VCC 7 B13VS 14 PWM_DIMM
42 ODD0- 51 PANEL_VCC
2-2 CN203_S (to Power board)
43 GND
1 B5V 8 GND
1-3 CN1304_S_HD (to Panel) 2 SW_POWER 9 B13VS
1 PANEL_VCC 16 EVEN_CLK+ 3 B5V 10 SW_INVERTER
2 PANEL_VCC 17 EVEN_CLK- 4 A5V 11 B13V
3 PANEL_VCC 18 GND 5 GND 12 B13V
4 PANEL_VCC 19 EVEN2+ 6 GND 13 B13V
5 PANEL_VCC 20 EVEN2- 7 B13VS 14 PWM_DIMM
6 GND 21 GND 8 PR
7 GND 22 EVEN1+
3 CN702 (FUNCTION)
8 GND 23 EVEN1-
1 IR 5 MSDA
9 TCON_WP 24 GND
2 GND 6 KEY1
10 LVDS_FORMAT 25 EVEN0+
3 A3.3V 7 KEY2
11 NC 26 EVEN0-
4 MSCL 8 GND
12 GND 27 GND
4-1 CN302 (SPEAKER)
13 EVEN3+ 28 TCON_SDA
1 R+ 3 L+
14 EVEN3- 29 TCON_SCL
2 R- 4 L-
15 GND 30 NC
4-2 CN602_1CH (SPEAKER)
1-4 CN1303_S_FHD (to Panel)
1 R- 2 L-
1 PANEL_VCC 16 EVEN1-
2 PANEL_VCC 17 GND 4-3 CN601_WF (SPEAKER)
3 PANEL_VCC 18 EVEN0+ 1 R+ 3 L+
4 NC 19 EVEN0- 2 R- 4 L-
5 NC 20 ODD3+
5 TU601 (TUNER)
6 NC 21 ODD3-
1 NC 7 IF_AGC
7 GND 22 ODDCLK+
2 B1.8V 8 DIF+
8 EVEN3+ 23 ODDCLK-
3 GND 9 DIF-
9 EVEN3- 24 GND
4 B3.3V 10 TUNER_CVBS
10 EVENCLK+ 25 ODD2+
5 TUNER_SCL 11 TUNER_SIF
11 EVENCLK- 26 ODD2-
6 TUNER_SDA 12 TUNER_NRESET
12 EVEN2+ 27 ODD1+
13 EVEN2- 28 ODD1-
14 GND 29 ODD0+
15 EVEN1+ 30 ODD0-

5-4
 5. Wiring Diagram

6 CN403(COMPONETN) 9 CN401_PC (ANALOG-PC)

1 GND 9 GND 1 PC_RED+ 9 PC_5V
2 COMP1_Y 10 GND 2 PC_GREEN+ 10 IDNET_PC
3 IDENT_AV 11 SL 3 PC_BLUE+ 11 RDB_FANET
4 GND 12 SR 4 TDB_FANET 12 DSDA
5 PB 13 GND 5 GND 13 H_SYNC
6 IDENT_COMP 14 SR 6 PC_RED- 14 V_SYNC
7 GND 15 SL 7 PC_GREEN- 15 DSCL
8 PR 8 PC_BLUE-

7-1 CN501 (HDMI1) 10 OP301 (OPTICAL)

1 HDMI1_RX2+ 11 GND 1 USB_VCC 3 USB_DP
2 GND 12 HDMI1_RXCLK- 2 USB_DM 4 GND
3 HDMI1_RX2- 13 HDMI_CEC
11 CN701_FANET(FANET)
4 HDMI1_RX1+ 14 GND
1 GMD 5 TDB_FANET
5 GND 15 SCL
2 RDB_FANET 6 RDB_FANET
6 HDMI1_RX1- 16 SDA
3 TDB_FANET 7 RDB_FANET
7 HDMI1_RX0+ 17 GND
4 TDB_FANET
8 GND 18 5V
9 HDMI1_RX0- 19 HPD
10 HDMI1_RXCLK+

7-2 CN502 (HDMI2)

1 HDMI2_RX2+ 11 GND
2 GND 12 HDMI2_RXCLK-
3 HDMI2_RX2- 13 HDMI_CEC
4 HDMI2_RX1+ 14 GND
5 GND 15 SCL
6 HDMI2_RX1- 16 SDA
7 HDMI2_RX0+ 17 GND
8 GND 18 5V
9 HDMI2_RX0- 19 HPD
10 HDMI2_RXCLK+

8-1 CN1201_L_NLCD(USB)
1 USB_VCC 3 USB_DP
2 USB_DM 4 GND

8-2 CN1202_S(USB)
1 USB_VCC 3 USB_DP
2 USB_DM 4 GND

5-5
5. Wiring Diagram

5-3. Connector Functions

„„ UA**EH50*0R

Connector Function

CN201  IP CNM803 Supply main power and dimming signal from IP board to Main Board.

CN1301_L_FHD  T-CON CNF1 Translate the LVDS Signal.

IP CNL802  PANEL Driver Board Power Supply to Panel.

„„ UA22ES500*R

Connector Function

CN201  IP CNM803 Supply main power and dimming signal from IP board to Main Board.

CN1303_S_FHD  T-CON CNF1 Translate the LVDS Signal.

IP CNL802  PANEL Driver Board Power Supply to Panel.

5-6
 5. Wiring Diagram

5-4. Cables
„„ UA**EH50*0R

Use LEAD (Main-IP 14P) LVDS (Main - Panel 30P)

32" : BN39-01449C 32" : BN96-17116V

40" : BN39-01449Q 40" : BN96-17116W
Code No. 42" : BN39-01449P 42" : BN96-23839N
46" : BN39-01449S 46" : BN96-17116X
50" : BN39-01449S 50" : BN96-17116X

Image

„„ UA22ES500*R

Use LEAD (Main-IP 14P) LVDS (Main - Panel 30P) LEAD (IP-Driver B'D 4P/6P)

Code No. BN39-01449E BN96-20370J BN39-01465B

Image

5-7