ETICS Fixings / E.W.

I
 Dear Partners,
According to an ancient native American saying, „we have
not inherited the earth from our parents but are merely borro-
wing it from our children“. This prescient wisdom held by the
native Americans is now more applicable than ever. The fact
that our natural resources are limited and that we should only
use what we can replace is still given too little heed. Every
one of us can be more aware and can do more to avoid waste.
The fischer group of companies is answering this challenge
with innovative solutions for energy-efficient construction,
amongst other things. The ever-increasing requirements
with regard to the thermal protection of buildings are conti-
nuously increasing the need for façades that feature thermal
insulation composite systems, as well the demand for insu-
lation fixings. We offer a range of approved fixing systems in
line with the European Technical Approvals (ETA) for ETICS
system providers. The following pages provide an overview
of the extensive range of products and services that we
have to offer, as well as a description of the various items.
Here you will not just find all of the hammerset and screw
fixings that we offer for systems; you can also view our
special fixings – these provide an easy-to-use and satis-
factory building solution for every fixing problem.
We hope that you enjoy using the fixing systems presen-
ted here. Should you have any further questions or if you
require personal assistance, please utilise the service pro-
vided by our experts via the technical support hotline, or
by our dedicated and experienced technical support staff.
.

Klaus Fischer
Fixing selection
 1) Only for termoz CN 8/370

2) Depends on the installation situation

Content

Content
Service 2 1
Hammerset fixings 8 2
Screw fixings 18 3
Discs 32 4
Miscellaneous 36 5

1
Service A brand and its promise to perform

The fischer brand Expertise that you can build on

„ „ The greatest expertise, safety and quality for plastic, steel „ „ Over 60 years‘ experience in fixing technology
and chemical fixing systems „ „ High-tech product solutions
1 „ „ The world‘s leading provider of fixing systems and the „ „ The highest quality standards
market leader in most European countries
„ „ Everything from one source thanks to the on-site research
„ „ A traditional brand with the highest name recognition & development, special mechanical engineering,
within the industry production and global logistics
„ „ An outstanding brand image. 92% of structural engineers „ „ fischer ProcessSystem (fPS) for the continuous
and architects recommend fischer optimisation of our processes and flexible adjustment to
„ „ The greatest satisfaction. 95% of customers would meet customer requirements
recommend fischer

Quality you can rely on

„ „ The greatest load-bearing capacities
„ „ Comprehensive, up-to-date international approvals,
technical test marks and assessments
„ „ Participation in the leading international, standard-setting
committees in the field of fixing technology
„ „ A certified quality management system in accordance
with DIN EN ISO 9001
„ „ fischer nylon quality guarantee
Innovative strength
„ „ Involvement in university and institutional research work „ „ 9.28 patent registrations per 1,000 employees per
annum (industry average 0.75)
„ „ In-house research & development for the plastics, steel
and chemistry sectors
„ „ Rapid implementation of own research results and market
See ICC-ES
Evaluation Report trends
at www.icc-es.org
ETA-98/004
ETAG 001- 3 ESR-1990 „ „ Wide range of products with over 14,000 problem
Option 1 für gerissenen Beton
solutions in the chemical, steel and plastic sectors
„ „ Standard products, project-specific solutions and special
solutions to suit customer requirements

2
 Service
Tailor-made services for you
 In order to maintain close contact
with the market and system „ „ Active sales service in over 100 countries
manufacturers, the E.W.I.(External „ „ Cost-effective technical advice in line with directives
Wall Insulation) department at
fischer Deutschland Vertriebs
provided by over 130 engineers worldwide 1
„ „ Prototypes, extraction tests, individual calculations,
GmbH is a member of the ETICS
comparisons and development of customised solutions,
professional association. This
technical documentation and online services
ensures that we are able to
develop new innovative products „ „ Free software tools, including the Fixperience design
and can benefit from a constant software suite, CAD-FIX 3D fixings database, etc.
exchange of expertise. „ „ Practical training courses in the fischer Academy and
across Germany in the Competence Centres„
 ETICS fixings are exclusively sold by ETICS licence holders.

Sustainable business and sustainable

products
„ „ Numerous internal activities oriented to the environment
„ „ Certified environmental management system in
accordance with DIN EN ISO 14001
„ „ Member of the German Sustainable Building Council
(DGNB)
„ „ Numerous products hold an EPD (Environmental Product
Declaration) from the Institute for Construction and the
Environment (Institut Bauen und Umwelt e.V., IBU) for
ecological building rating
„ „ fischer greenline – the world‘s first range of fixings that is
based on over 50% of renewable raw materials and
certified by DIN CERTCO / TÜV Rheinland

3
Service Approved
Gute Gründe
hammerset
für fischer
fixings

1)
(110, 370 and 390 = 0.001)

■ Quick to use ■ Complete range

■ No special tools necessary ■ Private label possible
■ All fixings are supplied pre-mounted ■ Almost thermal-bridge-free
■ Optimised loads ■ Additional plates available if
■ Short anchorage depths required

■ Top price-performance ratio

4
Approved screw fixings

Service
1

1)
(100 - 400 mm)
2)
(From 150 mm
insulation thickness)

■ Secure anchorage ■ Universal application

■ High loads ■ Private label possible
■ All fixings are supplied pre-mounted ■ Innovative and complete range
■ Recessed fixings included in the ■ Additional plates available
range for termoz 8 U and CS 8
■ Controlled setting

5
Service FixingGründe
Gute selection
für fischer

Fixing selection by usage category

The most common building materials are classified by usage category in line with ETAG 014. This makes it easier to choose the
most suitable fixing.

Usage cate-
gory A

Concrete

Usage cate-
gory B

Solid brick Solid sand-lime brick Solid lightweight concrete blocks

Usage cate-
gory C

1 Vertically perforated brick Perforated sand-lime brick Hollow blocks made from lightweight concrete

Usage cate-
gory D

Lightweight aggregate concrete

Usage cate-
gory E

Aeratet concrete

Selecting the fixing length

Correctly calculating the fixing length is key to achieving the greatest
Old plaster layer

Adhesive layer
} ttol

possible fixing safety. The specific characteristics of the job in hand must
always be taken into account hD
Determination of the required fixing length:
Anchorage depth hnom
+ Tolerance compensation ttol
+ Insulation thickness hD
= Required fixing length lD

The tolerance compensation comprises the following: hnom Anchorage depth

Non-load-bearing layers (thickness of old plaster, HWL panels, eco- h1 Drill hole depth
nomy facings, etc.)
tfix Usage length
+ Thickness of the adhesive mortar layer after pressing the insulation
ttol Tolerance compensation
boards onto the wall (generally approx. 10 mm) lD
hnom tfix
hD Insulation thickness
+ Additional compensation for uneven surface
h1 ttol Tolerance compensation
= Tolerance compensation ttol
lD Required fixing length

6
Basic Knowledge of Drilling Technology

Service
Drilling
The building material is decives when drilling. Four methods are available:
Rotary drilling: Drilling in rotary mode without impact, with a sharply ground carbide
drill bit. For perforated bricks and materials with low strength, the drill hole does not
become too large with it and the bars in the perforated bricks do not break.
Carbide drill bits drill faster if they are ground sharp, similar to steel drill bits. There are
also special masonry drill bits available.
Rotary drilling Impact drilling: Rotation and a high number of light impacts with the impact drilling
machine, for solid building materials with dense structure.
Hammer drilling: Rotation and a small number of minor impacts with high impact
energy with the drilling hammer, also for solid building materials with dense structure.

Impact
drilling

Standard Sharply ground

carbide drill bits carbide drill bits

Hammer
drilling

▸ Expert tip
• For almost all permissible fixings, rotary drillings and hammer drillings are
prescribed in the approval or guideline. 1
• Do not use drills with excessively worn out cutting edge width across
corners anymore (see rules of approval).
• The drill hole depth is always specified exactly and based on a definite thickness of
the anchoring base. The following rule of thumb is followed for general applications
without approval: Necessary thickness of the anchoring base = drill hole depth + 30
mm.
• To avoid tilting of the fixture, it must always be drilled perpendicular to the
anchoring base. Exceptional cases are regulated in the anchor approvals and/or the
manufacturer’s specifications (up to 5 ° is tolerable).

7
Hammerset fixings termoz LO 8

The economical ETICS hammerset fixing with GRP nail

Setting the hammerset fixing on polystyrene

Polystyrene rigid foam boards on solid brick
rigid foam boards

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B
▪ Concrete
▪ Building brick
▪ Solid sand-lime brick

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Optimised retention forces thanks to ▪ Attachment of ETICS insulating boards ▪ The fixing is set in  push-
the glass fibre reinforced plastic nail on concrete and solid brick masonry. through  installation.
(GRP). ▪ Flush-to-surface installation in ETICS ▪ Simple, fast setting by driving the GRP
▪ Small anchoring depth of 35 mm insulating materials and mineral wool nail in using a standard hammer.
saves on drilling times. e.g. polystyrene. ▪ Non-bearing layers such as adhesive
▪ Thanks to the GRP nail, the fixing is and old plaster are included in the
free of thermal bridging with the Chi maximum useful length.
value 0.000 [W/K].
▪ The compression zone in the shank
allows the disc to be drawn precisely
into the insulation.
▪ The disc fits tight into the insulation
thanks to its thickness of only 2.5 mm.
Thus allows the application of low-
cost, thin reinforcement layers.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 180 mm.

8
termoz LO 8

TECHNICAL DATA

Hammerset fixings
l

Ø 60 mm
termoz LO 8

h nom t fix

tfix = thickness of insulation + glue + old render

Drill hole Min. drill hole Effect. anchorage Anchor length Max. usable Disk Ø Sales unit
Approval

diameter depth depth length

d0 h1 hnom l tfix
Art.-No. ETA [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item
termoz LO 8/110 511371 ■ 8 45 35 108 70 60 100
termoz LO 8/130 511372 ■ 8 45 35 128 90 60 100
termoz LO 8/150 511373 ■ 8 45 35 148 110 60 100
termoz LO 8/170 511374 ■ 8 45 35 168 130 60 100
termoz LO 8/190 511375 ■ 8 45 35 188 150 60 100
termoz LO 8/210 511376 ■ 8 45 35 208 170 60 100
termoz LO 8/230 511377 ■ 8 45 35 228 190 60 100

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-10/0460 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
3)
Base material [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,17
Concrete C16/20 H 0,17
Concrete C50/60 H 0,17
Solid sand-lime brick KS 1,8 12 H 0,20
Solid brick Mz 2,0 12 R 0,20
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

9
Hammerset fixings termoz PN 8

The versatile ETICS hammerset fixing with GRP nail

Setting the hammerset fixing on polystyrene

Polystyrene rigid foam boards
rigid foam boards

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C
▪ Concrete
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Optimised retention forces thanks to ▪ Attachment of ETICS insulating boards ▪ The fixing is set in push-through instal-
the glass fibre reinforced plastic nail on concrete and masonry. lation.
(GRP). ▪ Flush-to-surface installation in ETICS ▪ Simple, fast setting by driving the GRP
▪ Small anchoring depth of 35 mm insulating materials and mineral wool nail in using a standard hammer.
saves on drilling times. e.g. polystyrene. ▪ Non  load bearing layers such as adhe-
▪ Thanks to the GRP nail, the fixing is sive and old plaster are included in the
free of thermal bridging  with the Chi maximum useful length.
value 0.000 [W/K].
▪ The compression zone in the shank
allows the disc to be drawn precisely
into the insulation.
▪ The disc fits tight  into the insulation
thanks to its thickness of only 2.5 mm.
Thus allows the application of low-
cost, thin reinforcement layers.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 180 mm.

10
termoz PN 8

TECHNICAL DATA

Hammerset fixings
l

Ø 60 mm
termoz PN 8

h nom t fix

tfix = thickness of insulation + glue + old render

Drill hole Min. drill hole Effect. anchorage Anchor length Max. usable Disk Ø Sales unit
Approval

diameter depth depth length

d0 h1 hnom l tfix
ETA [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termoz PN 8/110 506325 ■ 8 45 35 108 70 60 100
termoz PN 8/130 506326 ■ 8 45 35 128 90 60 100
termoz PN 8/150 506327 ■ 8 45 35 148 110 60 100
termoz PN 8/170 506328 ■ 8 45 35 168 130 60 100
termoz PN 8/190 506329 ■ 8 45 35 188 150 60 100
termoz PN 8/210 506330 ■ 8 45 35 208 170 60 100
termoz PN 8/230 506331 ■ 8 45 35 228 190 60 100

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-09/0171 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
3)
Base material [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,17
Concrete C16/20 H 0,17
Concrete C50/60 H 0,17
Solid sand-lime brick KS 1,8 12 H 0,20
Solid brick Mz 2,0 12 R 0,20
Perforated sand-lime brick KSL 1,4 12 H 0,13
Vertically perforated brick Hlz 1,0 12 R 0,13
Hollow brick of lightweight aggregate concrete Hbl 1,2 10 H 0,17
Triple-skin outer wall panels made of concrete C20/25 H 0,17
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

11
Hammerset fixings termofix CF 8

The installation-friendly ETICS hammerset fixing with steel nail

Polystyrene rigid foam boards on solid brick Mineralwool boards on a brick wall

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C, D
▪ Concrete
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Full blocks made from concrete
▪ Solid blocks made from lightweight
concrete
▪ Lightweight aggregate concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ High retention forces thanks to steel ▪ Attachment of ETICS insulating boards ▪ The fixing is set in push-through
nail. on concrete and masonry. installation.
▪ Small anchoring depth of 27.5 mm for ▪ Flush-to-surface installation in ETICS ▪ Simple, fast setting by driving the GRP
very fast drilling times. insulating materials and mineral wool plug in using a hammer. This drives
▪ Low transmission heat loss thanks to e.g. polystyrene. the steel nail into the shank and the
the glass fibre reinforced plastic  (GRP) fixing becomes anchored in the base.
hammer plug. ▪ Non load bearing layers such as adhe-
▪ The disc fits snugly into the insula- sive and old plaster are included in the
tion thanks to its low thickness. Thus maximum useful length.
allows the application of low-cost, thin
reinforcement layers.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 200 mm.

12
termofix CF 8

TECHNICAL DATA

Hammerset fixings
l

Ø 60 mm
termofix CF 8

h nom t fix

tfix = thickness of insulation + glue + old render

Drill hole Min. drill hole Effect. anchorage Anchor length Max. usable Disk Ø Sales unit
Approval

diameter depth depth length

d0 h1 hnom l tfix
ETA [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termofix CF 8/95 052092 ■ 8 35 27,5 100 70 60 100
termofix CF 8/115 052124 ■ 8 35 27,5 120 90 60 100
termofix CF 8/135 052127 ■ 8 35 27,5 140 110 60 100
termofix CF 8/155 052128 ■ 8 35 27,5 160 130 60 100
termofix CF 8/175 052134 ■ 8 35 27,5 180 150 60 100
termofix CF 8/195 052135 ■ 8 35 27,5 200 170 60 100
termofix CF 8/215 052139 ■ 8 35 27,5 220 190 60 100
termofix CF 8/235 052140 ■ 8 35 27,5 240 210 60 100

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-07/0287 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
Base material 3) [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,20
Concrete C16/20 H 0,25
Concrete C50/60 H 0,30
Solid sand-lime brick KS 1,8 12 H 0,25
Solid brick Mz 2,0 12 H 0,30
Full blocks made from concrete Vbn 2,0 20 H 0,20
Perforated sand-lime brick KSL 1,4 12 H 0,25
Vertically perforated brick Hlz 1,0 12 R 0,20
Hollow blocks made from lightweight concrete Hbl 1,2 10 H 0,17
Solid blocks made from lightweight concrete Vbl 1,4 8 H 0,10
Lightweight aggregate concrete LAC 0,8 4 H 0,10
Lightweight aggregate concrete LAC 0,8 6 H 0,13
Triple-skin outer wall panels made of concrete C20/25 H 0,25
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

13
Hammerset fixings termoz CN 8

The high-performance ETICS hammerset with compound nail

Additional reinforcement of ETICS Detail: innovative steel-plastic combination

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C, D
▪ Concrete
▪ Full blocks made from concrete
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Lightweight aggregate concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ High retention forces thanks to the ▪ Attachment of ETICS insulating boards ▪ The fixing is set in  push-
steel tip of the compound nail. on concrete and masonry. through  installation.
▪ Small anchoring depth of 35 mm ▪ Flush-to-surface installation in ETICS ▪ Simple, fast setting by driving the
saves on drilling times. insulating materials and mineral wool compound nail in using a standard
▪ The Termoz CN is virtually  free of e.g. polystyrene. hammer.
thermal bridging due tothe compound ▪ Non  load bearing layers such as adhe-
nail. sive and old plaster are included in the
▪ The compression zone in the shank maximum useful length.
allows the disc to be drawn in pre-
cisely .
▪ The disc fits tight  into the insulation
thanks to its thickness of only 2.5 mm.
Thus allows the application of low-
cost, thin reinforcement layers.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 340 mm.

14
termoz CN 8

TECHNICAL DATA

Hammerset fixings
l

Ø 60 mm
termoz CN 8

h nom t fix

tfix = thickness of insulation + glue + old render

Drill hole Min. drill hole Effect. anchorage Anchor length Max. usable Disk Ø Sales unit
Approval

diameter depth depth length

d0 h1 hnom l tfix
ETA [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termoz CN 8/110 507418 ■ 8 45 35 108 70 60 100
termoz CN 8/130 507419 ■ 8 45 35 128 90 60 100
termoz CN 8/150 507420 ■ 8 45 35 148 110 60 100
termoz CN 8/170 507421 ■ 8 45 35 168 130 60 100
termoz CN 8/190 507422 ■ 8 45 35 188 150 60 100
termoz CN 8/210 507423 ■ 8 45 35 208 170 60 100
termoz CN 8/230 507424 ■ 8 45 35 228 190 60 100
termoz CN 8/250 507425 ■ 8 45 35 248 210 60 100
termoz CN 8/270 507426 ■ 8 45 35 268 230 60 100
termoz CN 8/290 507427 ■ 8 45 35 288 250 60 100
termoz CN 8/310 507428 ■ 8 45 35 308 270 60 100
termoz CN 8/330 507429 ■ 8 45 35 328 290 60 100
termoz CN 8/350 507430 ■ 8 45 35 348 310 60 100
termoz CN 8/370 507431 ■ 8 45 35 368 330 60 100
termoz CN 8/390 507432 ■ 8 45 27 388 350 60 100

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-09/0394 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
Base material 3) [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,30
Concrete C16/20 H 0,30
Concrete C50/60 H 0,30
Solid sand-lime brick KS 1,8 12 H 0,30
Solid brick Mz 2,0 12 H 0,30
Full blocks made from concrete Vbn 2,0 20 H 0,25
Perforated sand-lime brick KSL 1,4 12 H 0,17
Vertically perforated brick Hlz 1,0 12 R 0,20
Hollow blocks made from lightweight concrete Hbl 1,2 10 H 0,20
Solid blocks made from lightweight concrete Vbl 1,4 8 H 0,20
Lightweight aggregate concrete LAC 0,8 4 H 0,13
Lightweight aggregate concrete LAC 0,8 6 H 0,20
Triple-skin outer wall panels made of concrete C20/25 H 0,30
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

15
Hammerset fixings termofix PN 8

The constructive ETICS hammerset fixing with GRP nail

Polystyrene rigid foam boards O35 on perfo-

Polystyrene rigid foam boards
rated sand-lime brick

BUILDING MATERIALS
▪ Concrete
▪ Building brick
▪ Solid sand-lime brick
▪ Vertically perforated brick
▪ Perforated sand-lime brick

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Optimised retention forces thanks to ▪ Attachment of ETICS insulating boards ▪ The fixing is set in  push-
the glass fibre reinforced plastic nail on concrete and masonry. through  installation.
(GRP). ▪ Flush-to-surface installation in ETICS ▪ Simple, fast setting by driving the GRP
▪ Small anchoring depth of 35 mm insulating materials e.g. polystyrene. nail in using a hammer.
saves on drilling times. ▪ Non  load  bearing layers such as
▪ The fixing is free of thermal bridges adhesive and old plaster are included
thanks to the GRP nail. in the maximum useful length.
▪ The compression zone in the shank
allows the disc to be pulled  into the
insulation.
▪ The disc fits tight to  the insulation
thanks to its thickness of only 2.5 mm.
Thus allows the application of low-
cost, thin reinforcement layers.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 180 mm.

16
termofix PN 8

TECHNICAL DATA

Hammerset fixings
l

Ø 60 mm
termofix PN 8

h nom t fix

tfix = thickness of insulation + glue + old render

Drill hole diameter Min. drill hole Effect. anchorage Anchor length Max. usable Disk Ø Sales unit
depth depth length
d0 h1 hnom l tfix
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
termofix PN 8/110 506742 8 45 35 108 70 60 100
termofix PN 8/130 506743 8 45 35 128 90 60 100
termofix PN 8/150 506744 8 45 35 148 110 60 100
termofix PN 8/170 506745 8 45 35 168 130 60 100
termofix PN 8/190 506746 8 45 35 188 150 60 100
termofix PN 8/210 506747 8 45 35 208 170 60 100
termofix PN 8/230 506748 8 45 35 228 190 60 100

17
Screw fixings termoz CS 8

The economic screw fixing for all ETICS insulation materials

Polystyrene rigid foam boards O35 on perfo-

Countersunk installation
rated sand-lime brick

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C, D, E
▪ Concrete
▪ Concrete (weather shell)
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Lightweight aggregate concrete
▪ Aerated concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Compound screw minimises the ther- ▪ Attachment of ETICS insulating boards ▪ The fixing is pushed through the
mal bridge, thus there are no fixing on concrete and masonry. insulation into the drilled hole and is
marks on the façade. ▪ Flush installation in all conventional screwed tight.
▪ Recessed installation with round cap insulation materials. ▪ For recessed installation, you require
provides a smooth surface for thinner ▪ Flush installation of insulation materi- the installation tool termoz CS.
render layer. als such as polystyrene rigid foam ▪ Optionally, the installation tool termoz
▪ Less drill wear and drill time due to panels and dense mineral wool panels. CS can also be used for flush installa-
minimum installation depth of 35 mm tion by turning the disc.
in the substrate. ▪ For recessed installation, the insula-
▪ With flush installation, the disc tapers tion disc is to be covered with a round
to a very thin edge, thus providing plug .
for optimal retaining of the insulation ▪ When using the installation tool, the
panel and for application of thin  ren- installation is completed when the
der. stop disc is flush with the insulation
▪ While flush installation the anchor panel.
washer can be combined with larger
insulation disc DT 90, DT 110 and DT
140 for very soft insolation materials.
▪ For insulation material thicknesses up
to 340 mm.
▪ Standard embedment depth for all
building materials.

18
termoz CS 8

FLUSH-TO SURFACE INSTALLATION

Screw fixings
COUNTERSUNK INSTALLATION

ALTERNATIV: FLUSH-TO SURFACE INSTALLATION

ACCESSORIES

Setting tool CS Setting tool CS

Caps MW D60 Caps PS D60 Bit T 25 CS 178,5 mm
(hexagonal-adapter) (SDS-adapter)
Sales unit
Item Art.-No. [pcs]
Caps MW D60 046172 100
Caps PS D60 046173 100
Setting tool CS (hexagonal-adapter) 532618 1
Satting tool CS (SDS-adapter) 532619 1
Bit T30 CS 26 mm 533761 1
Bit T25 CS 98,5 mm 533762 1
Bit T25 CS 178,5 mm 533763 1

19
 termoz CS 8

TECHNICAL DATA
Screw fixings

termoz CS 8

Drill diameter Fixing length Effect. ancho- Min. drill Max. usable Min. drill Max. usable Drive Sales unit
rage depth hole depth at length at hole depth at length at
Approval

surface-flush surface-flush countersunk countersunk

installation installation installation installation
d0 l hnom t tfix t tfix
ETA [mm] [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termoz CS 8/110 531960 1) ■ 8 108 35 45 70 - - T30 100
termoz CS 8/130 531970 ■ 8 128 35 45 90 60 90 T30 100
termoz CS 8/150 531974 ■ 8 148 35 45 110 60 110 T30 100
termoz CS 8/170 531976 ■ 8 168 35 45 130 60 130 T30 100
termoz CS 8/190 531978 ■ 8 188 35 45 150 60 150 T30 100
termoz CS 8/210 531982 ■ 8 208 35 45 170 60 170 T30 100
termoz CS 8/230 531984 ■ 8 228 35 45 190 60 190 T30 100
termoz CS 8/250 531987 ■ 8 248 35 45 210 60 210 T25 100
termoz CS 8/250 R 531989 2) ■ 8 248 35 45 210 60 210 T25 100
termoz CS 8/270 531991 ■ 8 268 35 45 230 60 230 T25 100
termoz CS 8/270 R 531993 2) ■ 8 268 35 45 230 60 230 T25 100
termoz CS 8/290 531995 ■ 8 288 35 45 250 60 250 T25 100
termoz CS 8/290 R 531997 2) ■ 8 288 35 45 250 60 250 T25 100
termoz CS 8/310 532000 ■ 8 308 35 45 270 60 270 T25 100
termoz CS 8/310 R 532003 2) ■ 8 308 35 45 270 60 270 T25 100
termoz CS 8/330 532006 ■ 8 328 35 45 290 60 290 T25 100
termoz CS 8/350 532008 ■ 8 348 35 45 310 60 310 T25 100
termoz CS 8/370 532011 ■ 8 368 35 45 330 60 330 T25 100
termoz CS 8/390 532014 ■ 8 388 35 45 350 60 350 T25 100
1) Not for countersunk mounting
2) R = version with a long expansion part for renovation or ETIC-system doubling

20
termoz CS 8

LOADS

Screw fixings
termoz CS 8 3)
Highest permissible loads for a single anchor1) 4) for multiple use for non-structural applications.
For the design the complete assessment ETA-14/0372 has to be considered.
Beton und Mauerwerk
Type Brick raw density min. compressive min. min. permissible min. min.
brick strength embedment depth member thickness tensile load 3) spacing 2) edge distance 2)
 fb hnom hmin Nzul smin cmin
[kg/dm³] [N/mm²] [mm] [mm] [kN] [mm] [mm]
Concrete
C12/15 - C45/55 0,40
CS 8 356) 100 100 100
C50/60 0,50
Weather shell
C20/25 - C45/55 0,40
CS 8 356) 5) 42 100 100
C50/60 0,50
Solid Clay bricks e.g. acc. to DIN 105-100:2012-01, EN 771-1:2011, Mz
CS 8 ≥ 1,8 20 356) 100 0,50 100 100
Calcium silicate solid bricks, e.g. acc. to DIN V 106:2005-10, EN 771-2:2011, KS
20 0,50
CS 8 ≥ 1,8 356) 100 100 100
12 0,30
Solid lightweight concrete block, e.g. acc. to DIN V 18152-100:2005-10 EN 771-3:2011 Vbl
CS 8 ≥ 1,4 8 356) 100 0,17 100 100
Solid concrete block, e.g. acc. to DIN V 18152-100:2005-10 EN 771-3:2011, Vbn
20 0,40
CS 8 ≥ 2,0 356) 100 100 100
12 0,25
Vertically perforated clay bricks e.g. acc. to DIN 105-100:2012-01, EN 771-1:2011, HLz
≥ 1,0 12 0,20
CS 8 257) 100 100 100
≥ 1,6 48 0,50
Hollow calcium silicate brick, acc. to DIN V 106:2005-10, EN 771-2:2011, KSL
20 0,30
CS 8 ≥ 1,4 257) 100 100 100
12 0,17
Hollow brick light-weight concrete, e.g. acc. to DIN V 18153-100: 2005-10, EN 771-3:2011 Hbl
CS 8 ≥ 0,9 4 256) 100 0,17 100 100
Hollow brick concrete, e.g. acc. to DIN V 18153-100: 2005-10, EN 771-3:2011 Hbn
10 0,40
8 0,30
CS 8 ≥ 1,2 25 6)
100 100 100
6 0,25
4 0,17
Lightweight Aggregate Concrete acc. to DIN EN 1520, LAC
CS 8 ≥ 0,9 6 356) 100 0,25 100 100
Autoclaved aerated concrete blocks, e.g. AAC acc. to DIN V 4165-100:2005-10, EN 771-4
4 357) 0,10
CS 8 ≥ 0,5 100 100 100
4 557) 0,20
1)
The partial safety factors for material resistance as regulated in the assessment as well as a 4)
The given loads are valid for installation and use of fixations in dry masonry for temperatures in
partial safety factor for load actions of F = 1,5 are considered. the substrate up to +24 °C (resp. short term up to 40 °C).
2)
Minimum possible axial spacings resp. edge distances acc. Assessment. 5)
Embedment depth permitted up to 45 mm.
3)
Plastic anchor for fixing of external thermal insulation composite systems with rendering acc. 6)
Hammer drilling
ETAG014. Only tensile wind loads are permitted. 7)
Rotary drilling

21
 termoz 8 U

The universal ETICS screw fixing with Delta-Seal coated steel

Screw fixings

screw

Polystyrene rigid foam boards O35 on perfo-

Additional reinforcement of ETICS
rated sand-lime brick

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C, E
▪ Concrete
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Solid blocks made from lightweight
concrete
▪ Aerated concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ High retention forces thanks to the ▪ Attachment of ETICS insulating boards ▪ The fixing is set in  push-
screwing process and embedment on concrete and masonry. through  installation.
depth of 70 mm. ▪ Flush-to-surface installation in ETICS ▪ The setting tool Termoz SWZ  TX  30
▪ High level of corrosion protection of insulating materials and mineral wool is required for installation.
the screw thanks to Delta-Seal coating. e.g. polystyrene. ▪ Simple, fast setting by screwing the
▪ An air gap is produced above the Delta-Seal coated screw in using a
screw head due to the sealing ball. standard screwdriver.
This reduces heat transmission losses. ▪ Non-load-bearing layers such as adhe-
▪ The flexible head compensates for sive and old plaster are included in the
any heat-related tension and prevents maximum useful length.
damage.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 320 mm.

22
termoz 8 U

TECHNICAL DATA

Screw fixings
termoz 8U
- Pre-assembled with screw T30

h nom
h1

tfix = thickness of insulation + glue + old render

Drill hole Min. drill hole Effect. ancho- Anchor length Max. usable Disk Ø Drive Sales unit
Approval

diameter depth rage depth length

d0 h1 hnom l tfix
ETA [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termoz 8U/125 003826 ■ 8 85 70 125 55 60 T30 100
termoz 8U/145 003827 ■ 8 85 70 145 75 60 T30 100
termoz 8U/165 003828 ■ 8 85 70 165 95 60 T30 100
termoz 8U/185 003829 ■ 8 85 70 185 115 60 T30 100
termoz 8U/205 003830 ■ 8 85 70 205 135 60 T30 100
termoz 8U/225 003831 ■ 8 85 70 225 155 60 T30 100
termoz 8U/245 003832 ■ 8 85 70 245 175 60 T30 100
termoz 8U/265 003833 ■ 8 85 70 265 195 60 T30 100
termoz 8U/285 003834 ■ 8 85 70 285 215 60 T30 100
termoz 8U/305 003835 ■ 8 85 70 305 235 60 T30 100
termoz 8U/325 501447 ■ 8 85 70 325 255 60 T30 100
termoz 8U/345 501450 ■ 8 85 70 345 275 60 T30 100
termoz 8U/365 501451 ■ 8 85 70 365 295 60 T30 100
termoz 8U/385 501452 ■ 8 85 70 385 315 60 T30 100
termoz 8U/405 501453 ■ 8 85 70 405 335 60 T30 100

ACCESSORIES

termoz - setting tool

Seat Matching anchor type Sales unit

Item Art.-No. [pcs]
SWZ-TX30 008698 T30 termoz 8 U 1

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-02/0019 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
3)
Base material [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,50
Concrete C16/20 H 0,50
Concrete C50/60 H 0,50
Solid sand-lime brick KS 1,6 12 H 0,50
Solid brick Mz 1,6 12 H 0,50
Perforated sand-lime brick KSL 1,4 12 H 0,25
Vertically perforated brick Hlz 1,2 12 R 0,25
Hollow blocks made from lightweight concrete Hbl 0,5 2 R 0,13
Solid blocks made from lightweight concrete Vbl 0,5 4 R 0,20
Aerated concrete PP 0,5 4 R 0,40
Triple-skin outer wall panels made of concrete C20/25 H 0,50
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

23
 termoz SV II ecotwist

The innovative countersinkable ETICS fixing for all building

Screw fixings

material classes

Setting procedure termoz SV II ecotwist in Setting procedure termoz SV II ecotwist in

polystyrene rigid foam boards 032 polystyrene rigid foam boards 032

BUILDING MATERIALS APPROVALS

▪ Building material classes A, B, C, D, E
▪ Concrete
▪ Concrete (weather shell)
▪ Building brick
▪ Solid sand-lime brick
▪ Hollow blocks made from lightweight
concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Aerated concrete
▪ Lightweight aggregate concrete
▪ Sepa Parpaing (French brick)

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Standard anchoring depth for all build- ▪ Attachment of ETICS polystyrene ▪ The fixing is inserted through the insu-
ing materials. rigid foam boards and similar mineral lating material into the drill hole and
▪ One fixing for all insulating material wool boards to concrete and masonry screwed in using the setting tool.
thicknesses from 100 mm to 400 materials. ▪ The screwing disc and screw have the
mm. This increases productivity, saves ▪ Counterbored installation same pitch, which means they turn at
time and storage space. the same time through the insulation
▪ Sturdy setting tool with stop disc for a until the anti-rotation lock meets the
simple and precise setting procedure. base.
▪ The screw disc cuts in cleanly, without ▪ Then the steel screw turns into the
damaging the insulating material. expansion zone. The compression
▪ Simple setting using the specially zone is compressed until it is only a
designed setting tool. few millimetres thick and the fixing is
anchored in the base.
▪ The setting process is completed
when the marking ring is flush with
the insulation.

24
termoz SV II ecotwist

TECHNICAL DATA

Screw fixings
Ø 66 mm
termoz SV II ecotwist
h ef t tol hD
h nom
h1

Insulation Shaft Thickness Effect. ancho- Shaft length Drillhole Total drill Sales unit

Approval
thickness diameter tolerance rage depth in drill hole depth in base hole depth
compensation material
hD ttol hef hnom h1
ETA [mm] [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item Art.-No.
termoz SV II ecotwist 0-10 530353 ■ 100 - 400 8 0 - 10 35 45 55 hD + 55 100
termoz SV II ecotwist 10-30 530354 ■ 100 - 400 8 0 - 30 35 65 75 hD + 75 100
termoz SV II ecotwist 30-60 530355 ■ 100 - 400 8 30 - 60 35 95 105 hD + 105 100

ACCESSORIES

termoz SV II closing plug termoz SV II Installation tool

Sales unit

Item Art.-No. [pcs]

termoz SV II closing plug 530654 200
termoz SV II installation tool 260 mm 530356 1
termoz SV II installation tool 400 mm 530357 1

LOADS
Permissible loads1) 4) for a single anchor for fixing of external thermal insulation composite systems
For the design the complete approval ETA-12/0208 has to be considered.
min. raw density class min. compressive brick Drilling method 2) Permissible loads
strength according ETA-approval
ρ fb
3)
Base material [kg/dm³] [N/mm²] [-] [kN]
Concrete C12/15 H 0,50
Concrete C16/20 H 0,50
Concrete C50/60 H 0,50
Solid sand-lime brick KS 2,0 12 H 0,40
Solid sand-lime brick KS 2,0 20 H 0,50
Solid brick Mz 1,8 12 H 0,40
Full blocks made from concrete Vbn 2,0 12 H 0,40
Full blocks made from concrete Vbn 2,0 20 H 0,50
Perforated sand-lime brick KSL 1,4 12 H 0,25
Perforated sand-lime brick KSL 1,4 20 H 0,40
Vertically perforated brick Hlz 1,0 12 R 0,25
Hollow blocks made from lightweight concrete Hbl 1,2 8 H 0,30
Hollow blocks made from lightweight concrete Hbl 1,2 10 H 0,20
Solid blocks made from lightweight concrete Vbl 1,4 8 H 0,20
Lightweight aggregate concrete LAC 1,0 6 H 0,25
Aerated concrete PP 0,5 4 R 0,13
Triple-skin outer wall panels made of concrete C20/25 H 0,30
1)
The required partial safety factors for material resistance as well as a partial safety factor for load actions F = 1,5 are considered.
2)
H = Hammer drilling; R = Rotary drilling
3)
Restrictions concerning each producer and the possible hole pattern resp. web thickness please see approval. The characteristic tension resistance of the anchor may be determined by means of job site
pullout tests carried out on the material actually used, if a characteristic resistance of the base material does not exist.
4)
Tensile loads only

25
 termofix 6H-NT

Surface or countersunk ETICS fixing for board materials with

Screw fixings

approved Power-Fast screw

Fixing of wooden soft fibre boards on solid Attachment of polystyrene boards on OSB-
wood panel

BUILDING MATERIALS
▪ 3-layer boards
▪ MDF boards
▪ OSB boards
▪ Chipboard
▪ Gypsum fibreboard
▪ Solid wood

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Pre-fitted fixing with the approved ▪ Attachment of ETICS insulating boards ▪ The fixing is inserted using a standard
fischer Power-Fast screw. This guaran- on wooden substructures. T30 bit for flush installation.
tees safe retention in the substrate. ▪ Flush installation in ETICS insulating ▪ The TSS assembly tool is required for
▪ The minimum screw-in depth of 30 materials e.g. polystyrene. countersunk installation. This is used
mm guarantees fast assembly. There is ▪ Flush-to-surface installation in wooden for precise positioning and screwing
no need to pre-drill the hole. soft fibre boards. of the fixing. Thecounterbore is sealed
▪ Plugs are enclosed in every packaging using an insulating disc available,
unit. resulting in a level insulating material
▪ The fixing discs can be combined surface.
with the large insulating discs DT 90, ▪ The disc of the TSS assembly tool can
DT 110 and DT 140 when very soft also be turned and used for flush-to-
insulating materials are used. surface installation. This prevents the
▪ Countersinkable assembly using the disc from being set too deep.
TTS assembly tool is possible in soft
materials such as polystyrene rigid
foam boards PS 15 or PS 20.
▪ For insulating material thicknesses up
to 280 mm.

26
termofix 6H-NT

FLUSH-TO SURFACE INSTALLATION

Screw fixings
COUNTERSUNK INSTALLATION

TECHNICAL DATA

termofix 6H-NT

surface-flush installation

recessed installation
Fixing length Disk Ø Screw diameter Anchorage depth Usable length Usable length at Sales unit
at surface-flush anchorage depth
installation 70mm
l ds hv tfix tfix
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
termofix 6H-NT 60 523198 1) 60 60 6,0 35 30 — 100
termofix 6H-NT 80 523199 80 60 6,0 30 50 65 100
termofix 6H-NT 100 523200 100 60 6,0 30 70 85 100
termofix 6H-NT 120 523201 120 60 6,0 30 90 105 100
termofix 6H-NT 140 523202 140 60 6,0 30 110 125 100
termofix 6H-NT 160 523203 160 60 6,0 30 130 145 100
termofix 6H-NT 180 523204 180 60 6,0 30 150 165 100
termofix 6H-NT 200 523205 200 60 6,0 30 170 185 100
termofix 6H-NT 220 523206 220 60 6,0 30 190 205 100
termofix 6H-NT 240 523207 240 60 6,0 30 210 225 100
termofix 6H-NT 260 523208 260 60 6,0 30 230 245 100
termofix 6H-NT 280 523209 280 60 6,0 30 250 265 100
termofix 6H-NT 300 523210 300 60 6,0 30 270 285 100
termofix 6H-NT 320 523211 320 60 6,0 30 290 305 100
1) suitable for flush-mounting installation only

27
Screw fixings termofix 6H-NT

Caps MW D60 Caps PS D60 Setting tool TSS

Sales unit
Item Art.-No. [pcs]
Caps MW D60 046172 100
Caps PS D60 046173 100
Setting tool TSS 524128 1

LOADS
termofix 6H-NT
Extraction values in various building materials.
Anchoring substrate Thickness Recommended maximum service load
values from internal laboratory tests
d safety coefficient 3, dephtment 30 mm
[mm] [kN]
OSB panel 16 0,40
Timber planking FP (laminated particle board) 16 0,30
3 Layer panel 19 0,50
Beams 60 0,60 (bei hv 40 = 1,0 kN)
Gypsum fibre board 12,5 0,15
MDF board 19 0,50

28
 Screw fixings
Advantage for professionals:
The fischer International Catalogue offers lots of facts and helps with fast and
secure product selection. Over 300 pages of
▪ Product descriptions with advantages/benefits overview
▪ Installation tips
▪ Application aids
▪ Detailed technical data
▪ Fundamentals of fastening technology

In short: everything that the professional needs to know about fastening.

29
 termofix B

The constructive screw fixing with Delta-Seal coated drilling

Screw fixings

screw for metal substructures

Polystyrene rigid foam boards on metal sheet

BUILDING MATERIALS
▪ Metal sheet / trapezoidal metal sheet
up to 1.5 mm

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The pre-assembled screw reduces ▪ Attachment of ETICS insulating boards ▪ The fixing is set in push-through instal-
working time. to metal substructures. lation.
▪ High level of corrosion protection of ▪ Flush-to-surface installation in ETICS ▪ A standard PH2 bit is required for
the screw thanks to Delta-Seal coating. insulating materials e.g. polystyrene. installation.
▪ An air gap is produced above the ▪ Simple, fast setting by screwing the
screw head beneath the sealing ball. Delta-Seal coated screw in using a
This reduces heat transmission. standard screwdriver.
▪ The flexible head compensates for any ▪ Non  load bearing layers such as
heat-expansion and prevents damage. adhesive are included in the maximum
▪ Can be combined with the insulating useful length.
discs DT 90, DT 110 and DT 140 for
very soft insulating materials.
▪ For insulating material thicknesses up
to 160 mm.

30
termofix B

TECHNICAL DATA

Screw fixings
l

termofix B

h t fix

Effect. anchorage Fixing length Max. usable Screw length Disk Ø Drive Sales unit
depth length
h l tfix ls
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]
termofix B 70 008691 20 70 50 60 60 PH 2 100
termofix B 90 008692 20 90 70 80 60 PH 2 100
termofix B 110 008693 20 110 90 100 60 PH 2 100
termofix B 130 008694 20 130 110 120 60 PH 2 100
termofix B 160 008695 20 160 140 150 60 PH 2 100
termofix B 180 008696 20 180 160 170 60 PH 2 100

31
 Insulation Disc DT

The insulation disc for combination with termoz and termofix

Discs

screw fixings

Additional washers for soft insulation boards Soft insulation board

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The various disc diameters allow for ▪ Used in combination with Termoz and ▪ The discs are set in  push-
individual adaptation to various insula- Termofix screw fixings to fix ETICS through  installation.
tion materials and requirements and insulating boards with low compres- ▪ Push the selected DT insulating disc
offer the greatest flexibility with wide- sive strength onto the termoz or termofix screw
ranging applications. ▪ Flush surface installation in ETICS fixing and fit.
▪ The flexible pins in the DT 90 ensure insulating materials e.g. mineral wool
sustained pressure on the insulation,
thus providing a secure hold.
▪ The DTM 60 made of stainless steel
A4 makes it possible to use a frame
fixing, and allows for a secure fixing
of the insulation material in façade
construction in cases of high require-
ments.

TECHNICAL DATA

DT 90 DT 110 DT 140
Disk Ø Sales unit

Item Art.-No. [mm] [pcs]

DT 90 008889 90 100
DT 110 090745 110 100
DT 140 008690 140 100

32
termofix H

Discs
The disc element for use with standard screws

Attachment of polystyrene boards on OSB-

panel

BUILDING MATERIALS
▪ Panel building materials
▪ Solid wood

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The polystyrene plugs are included ▪ Attachment of ETICS insulating ▪ The fixing (disc and screw) is set in
with the disc element Termofix H 10. boards. push-through installation.
▪ In case of disc elements termofix H ▪ Non-load-bearing layers such as adhe-
50, 90 and 150 the disc is sealed sive and old plaster should not serve
using the sealing cap moulded on. as an anchoring base.
▪ An air column is produced between
the screw head and this seal. This
reduces heat transmission losses.
▪ Extremely economical thanks to dif-
ferent shank lengths. This allows the
screw length to be reduced if neces-
sary.
▪ Can be combined with the insulating
discs DT 90, DT 110 and DT 140.

TECHNICAL DATA

termofix H 90

Shaft length Disk Ø Disc lock Colour Sales unit

L
Item Art.-No. [mm] [mm] [pcs]
termofix H 10 514288 29 60 PS plug (included) green 100
termofix H 50 514289 69 60 Sealing cap (moulded on) green 100
termofix H 90 514290 109 60 Sealing cap (moulded on) green 100
termofix H 150 514291 169 60 Sealing cap (moulded on) green 100

33
Discs Insulation discs

Discs for combining nail and frame fixings, as well as screws

Insulating materials in two-leaf external walls

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The various disc diameters allow for ▪ To fix soft and pressure-resistant insu- ▪ The disc size is to be selected in line
individual adaptation to various insula- lation materials. with the compressive strength of the
tion materials and requirements and ▪ DT 90/4 on VB wall tie insulating material.
offer the greatest flexibility with wide- ▪ DT 60/10, DTM 60/10 and DTM ▪ To be combined with anchors, screws
ranging applications. 70/10 in combination with 10mm or nails corresponding to the available
▪ The flexible pins in the DT 90 ensure frame fixing base material.
sustained pressure on the insulation, ▪ DT 90/8 and insulation washer 8/60 ▪ DT90/4 is suitable for pushing on to
thus providing a secure hold. in combination with 8mm hammerfix fischer wall tie VB.
▪ The DTM 60 made of stainless steel ▪ HV and HK 36 with 5mm screws
A4 makes it possible to use a frame
fixing, and allows for a secure fixing
of the insulation material in façade
construction in cases of high require-
ments.

34
Insulation discs

TECHNICAL DATA

Discs
HV 36 plastic HV 36 zinc ISO-disk 8/60 DT 60/10 DTM-A4 DTM 70/10 DT 90
Disk Ø Disc height Through hole Steel sheet Sales unit
thickness
df s
Item Art.-No. [mm] [mm] [mm] [mm] [pcs]
HK 36 plastic 004283 36 4.5 5 — 100
HV 36 zinc 004286 36 3.5 5 0,7 100
HA 36 st. st. A4 004285 36 3.5 5 — 100
ISO-disk 8/60 001680 60 7 8 — 100
DT 60/10 044317 60 7 10 — 50
DTM 60/10 A4 088805 60 3 10,5 0,5 100
DTM 70/10 zinc 044318 70 3 10,5 — 50
DT 90/4 080957 1) 90 9.3 4 — 250
DT 90/8 080958 90 9.3 8,2 — 250
1) The central hole is adapted in such a way that the disc clamps well on the 4 mm wire of the VB walltie.

35
 Hammerfix N-F

The hammer-in plug for a simple, fast and economical

Miscellaneous

installation

Timber sub-structures To fix ETICS rails

BUILDING MATERIALS CHARACTERISTICS

▪ Concrete
▪ Solid sand-lime brick
▪ Building brick
▪ Natural stone
▪ Solid brick made from lightweight
concrete
▪ Aerated concrete
▪ Solid panel made from gypsum
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Hollow blocks made from lightweight
concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The rapid hammerset installation ▪ Substructures made of wood and ▪ The Hammerfix N is suitable for push-
reduces the amount of time required metal through installation.
and allows for an economic series ▪ Wall connection or plaster profiles ▪ When hammered in, the nail screw
installation. ▪ Slides causes the plug to expand in two
▪ The integrated hammer-in stop ▪ Sheets directions, thus providing a secure
prevents the plug from expanding ▪ Cable and pipe clips anchoring in the building material.
prematurely (jamming), thus enabling ▪ Punched tapes ▪ Countersunk head plugs are recom-
a problem-free installation. mended for the installation of timber
▪ Together with the cross-slot recess, constructions; in the case of metal
the thread of the nail screw allows the constructions, use flat-head plugs, and
screw to be removed, thus allowing for use pan-head plugs for long holes.
subsequent dismantling.
▪ The wide range of diameters, usage
lengths and head shapes provides the
correct plug for every fixing.

36
Hammerfix N-F

TECHNICAL DATA

Miscellaneous
Hammerfix N-F with cylindrical head and
nail, pre-assembled

Drill hole diameter Effect. anchorage Anchor length Min. drill hole depth Max. fixture thick- Sales unit
depth for through fixings ness
d0 hef l h2 t fix
Item Art.-No. [mm] [mm] [mm] [mm] [mm] [pcs]
N 6 x 40/10 F (50) 513837 6 30 40 55 10 50
N 6 x 40/10 F (100) 513840 6 30 40 55 10 100
N 6 x 40/10 F (200) 513843 6 30 40 55 10 200
N 6 x 60/30 F (50) 513838 6 30 60 75 30 50
N 6 x 60/30 F (100) 513841 6 30 60 75 30 100
N 6 x 60/30 F (200) 513844 6 30 60 75 30 200
N 6 x 80/50 F (50) 513839 6 30 80 95 50 50
N 6 x 80/50 F (100) 513842 6 30 80 95 50 100
N 6 x 80/50 F (200) 513845 6 30 80 95 50 200
N 8 x 60/20 F (50) 513697 8 40 60 75 20 50
N 8 x 60/20 F (100) 513701 8 40 60 75 20 100
N 8 x 80/40 F (50) 513698 8 40 80 95 40 50
N 8 x 80/40 F (100) 513702 8 40 80 95 40 100
N 8 x 100/60 F (50) 513699 8 40 100 115 60 50
N 8 x 100/60 F (100) 513703 8 40 100 115 60 100
N 8 x 120/80 F (50) 513700 8 40 120 135 80 50
N 8 x 120/80 F (100) 513704 8 40 120 135 80 100

LOADS
Hammerfix N
Highest recommended loads1) for a single anchor.
The given loads are valid for screw nails with the specified diameter.
Type N5 N6 3) N8 N10

Screw nail diameter Ø [mm] 3,5 4 5 7

Recommended loads in the respective base material Frec2)
Concrete ≥ C20/25 [kN] 0,16 0,20 0,27 0,33
Solid brick ≥ Mz12 [kN] 0,14 0,18 0,24 0,30
Solid sand-lime brick ≥ KS12 [kN] 0,14 0,17 0,24 0,33
Solid brick of lightweight aggregate concrete ≥ V4 [kN] 0,05 0,12 0,15 0,16
Aerated concrete ≥ PB2 [kN] 0,03 0,04 0,05 0,10
Aerated concrete ≥ PB4 [kN] 0,07 0,10 0,13 0,16
1)
Includes the safety factor 4. 3)
The values have to be reduced by 50% for N 6 x 40/7 P K.
2)
Valid for tensile load, shear load and oblique load under any angle.

37
Miscellaneous Insulation fixing FID

Thermal bridge-free installation in insulation materials

Fixings in ETICS Fixings in ETICS

BUILDING MATERIALS
▪ Non-plastered, pressure-resistant insu-
lating boards
▪ Plastered, pressure-resistant insulating
boards
▪ ETICS insulating boards

ADVANTAGES APPLICATIONS FUNCTIONING

▪ Since the anchor is set exclusively in To fix lightweight fixtures in plas- ▪ The FID can be set in the insulating
the insulation itself, fixtures can be tered and non-plastered insulating board with a cordless screwdriver or
installed without thermal bridges. boards. by hand.
▪ The geometry of the FID allows for The areas of application are: ▪ The special spiral thread taps itself in
a simple installation in thin layers of ▪ Façade construction (ETICS) the insulating board.
plaster, without the need for pre-drill- ▪ Insulating construction ▪ Fixtures are fixed with a 4.5 mm
ing, thus saving a stage of installation. ▪ Electric construction screw for the FID 50, and with a
▪ The FID 50 is used in thin insulating ▪ Refrigerated and climate construction 6 mm screw for the FID 90.
boards from 50mm. The FID 90 is ▪ Acoustic construction ▪ Water ingress in the insulation can be
used in thicker insulating boards, and prevented by sealing the plug collar
can bear higher loads. with a suitable sealant after successful
▪ The bit mounting allows for setting pre-positioned installation.
with standard tools, thus allowing for a
fast and economic installation.

38
Insulation fixing FID

TECHNICAL DATA

Miscellaneous
Ø 25 mm

l
Insulation fixing FID 50 Insulation fixing FID 90
Anchor length Min. bolt pene- Wood and chip- Drive Sales unit
tration board screws
l ds
Item Art.-No. [mm] [mm] [mm] [mm] [pcs]
FID 50 048213 50 50 4,5 - 5 T40 40 50
FID 90 510971 90 90 6 6 mm / 6-kt 80 25

LOADS
Insulation fixing FID
Highest recommended loads1) for a single anchor.
The given loads are valid for chipboard screws with maximum diameter.
Type FID 50 FID 90

Screw diameter Ø [mm] 4,5- 5,0 6

Recommended loads in the respective base material Frec 2)
Polystyrene PS 15 [kN] 0,05 0,08
Polystyrene PS 20 [kN] 0,09 0,14
1)
Includes the safety factor 5. 2)
Valid for tensile load.

39
Miscellaneous Remedial wall tie VBS-M

The quick façade repair for two-leaf cavity walls

Facing masonry

VERSIONS APPROVALS
▪ zinc-plated steel
▪ stainless steel

BUILDING MATERIALS
▪ Facing masonry with and without an
air layer

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The approved fixing in stone and in ▪ VBS-M is especially suitable for ▪ The remedial wall tie VBS-M is set in
joints from at least 50 mm facing applications where external thermal the load-bearing layer and into facing
masonry provides a high degree of insulation composite systems (ETICS) masonry using push-through installa-
flexibility and security. have been previously installed.. tion.
▪ Use in joints and with a low anchor- ▪ Retrospective repairs of cavity ▪ In accordance with the approval, no
age depth of just 50 mm allows for a masonry walls in line with DIN drill hole cleaning is required.
quick and economical installation. 1053-1 and EN 845/846 as well as ▪ The two expansion zones in the
▪ The small anchor rim and screw head economy facings with DIN 18515. load-bearing layer and in the facing
allow for a surface-flush or deep-set masonry ensure a secure fixation.
installation. ▪ The plug doesn’t fix into the facing
▪ The drill hole can be retrospectively masonry until the head grips into the
sealed so that it is no longer visible in load-bearing layer. This ensures the
the façade. very best installation safety.
▪ A drip coil prevents condensate
running into the load-bearing layer,
thus preventing frost and corrosive
damage.

40
Remedial wall tie VBS-M

TECHNICAL DATA

Miscellaneous
Remedial wall tie VBS-M

zinc-plated stainless Max. shell Max. shell Facing mason- Drill diameter Drill hole depth Effect. ancho- Anchor length Sales unit
steel steel distance at distance at ry + cavity rage depth
115 mm facing 115 mm facing
masonry, flush masonry,
installation 20 mm sunk
installation
tfix d0 h0 hef l
Art.-No. Art.-No. [mm] [mm] [mm] [mm] [mm] [mm] [mm] [pcs]
Item gvz A4
VBS-M 8 x 120 514243 514236 20* — 70 8 140 >50 120 100
VBS-M 8 x 185 514244 514237 20 40 135 8 205 >50 185 100
VBS-M 8 x 205 514245 514238 40 60 155 8 225 >50 205 100
VBS-M 8 x 225 514246 514239 60 80 175 8 245 >50 225 100
VBS-M 8 x 245 514247 514240 80 100 195 8 265 >50 245 100
VBS-M 8 x 265 514248 514241 100 120 215 8 285 >50 265 100
VBS-M 8 x 285 514249 514242 120 140 235 8 305 >50 285 100
* Max. 20 mm mortar layer in the case of 50 mm thick economy facing.
The drill hole depth is to be adapted accordingly in the case of sunk installation of the anchor.

ACCESSORIES / DRILLS
SDS Plus IV 8/100/400 Masonry drill bit 8/100/400
SDS Plus II Pointer 8/400/460
Description Sales unit
Item Art.-No. [pcs]
fischer masonry drill bit with SDS fixture and short flute, ground sharp, for rotary
Masonry drill bit 8/100/400 517690 1
drilling in perforated brick and in the bed joint
SDS Plus II 8/400/460 503936 fischer hammer drill bit for drilling in concrete and in the facing brick 1

ACCESSORIES / BITS

FPB TX 25/5 long Star recess TX

Description Sales unit

Item Art.-No. [pcs]
fischer Profi-Bit long, which can be extended to 50 mm bit, allows for deep setting in stone and in
FPB TX 25/5 long 517693 5
the bed joint
FPB TX25/10 507728 fischer Profi-Bit 10

41
 Stand-off installation Thermax

The approved stand-off installation with thermal barrier in

Miscellaneous

external thermal insulation composite systems (ETICS)

Awnings Satellite dishes and air conditioning units

VERSIONS APPROVALS
▪ zinc-plated steel
▪ stainless steel

BUILDING MATERIALS
Approved for:
▪ Concrete, cracked and non-cracked
▪ Vertically perforated brick
▪ Hollow blocks made from lightweight
concrete
▪ Perforated sand-lime brick
▪ Solid sand-lime brick
▪ Solid brick
Also suitable for:
▪ Aerated concrete

ADVANTAGES APPLICATIONS FUNCTIONING

▪ When combined with the injection Approved for: ▪ The Thermax 12 and 16 systems are
mortars FIS V and FIS EM, the stand- For the thermally separated fixing of: suitable for pre-positioned installation.
off installation is approved for high ▪ Awnings ▪ The self-tapping, glass-fibre-reinforced
loads in a range of materials. This ▪ Canopies cone cuts its own way through the
allows for a secure fixing. ▪ French balcony railings plaster into the insulation during instal-
▪ Usage lengths of 60 to 295 mm can ▪ Consoles lation.
be covered with just one Thermax. ▪ Air conditioning units ▪ The anti-cold cone uses a thermal bar-
▪ The plastic cone creates a thermal bar- ▪ Satellite dishes rier to minimise heat losses.
rier between the fixture and the inner ▪ In the case of resistant plaster (e.g.
fixture, and offers an energy-optimised thick cement plaster), it is recom-
fixing. mended that the Thermax cutting
▪ The glass-fibre-reinforced plastic cone blade included is used for grinding out
cuts its own way through the ETICS the plaster.
with a positive fit, and allows for a ▪ The sealing of the annular gap with
simple, fast and adjustable installation the adhesive and sealant KD seals the
without the need for any special tools. façade at plaster level.

42
Stand-off installation Thermax

INSTALLATION

Miscellaneous
TECHNICAL DATA

Thermax 12/110 M12

Thermax 16/170 M12

zinc-plated stainless Contents Sales unit

Approval

steel steel

DIBt
Art.-No. Art.-No. [pcs]
Item gvz A4
20 M12 threaded rods, 20 anti-cold cones, 20 M12 A4 setscrews,
Thermax 12/110 M12 051291 — ▯ 20 A4 washers, 20 A4 nuts, 20 perforated sleeves 20 x 130, 5 bit, 20
5 cutting blades, 5 user manuals
10 M12-A4 threaded rods, 10 anti-cold cones, 10 M12-A4 setscrews,
Thermax 12/110 M12 — 051537 ▯ 10 A4 washers, 10 A4 nuts, 10 perforated sleeves 20 x 130, 3 bit, 10
3 cutting blades, 3 user manual
2 M12 threaded rods, 2 anti-cold cones, 2 M12 A4 setscrews, 2 A4 washers,
Thermax 12/110 M12 B 051290 — ▯ 1
2 A4 nuts, 2 perforated sleeves 20 x 130 , 1 bit, 1 cutting blade, 1 user manual
20 M16 threaded rods, 20 anti-cold cones, 20 M12 A4 setscrews,
Thermax 16/170 M12 051293 — ▯ 20 A4 washers, 20 A4 nuts, 20 perforated sleeves 20 x 200, 5 bit, 5 cutting 20
blades, 5 applicator tip extension hoses, 5 user manuals
10 M16 A4 threaded rods, 10 anti-cold cones, 10 M12-A4 setscrews,
Thermax 16/170 M12 — 051543 ▯ 10 A4 washers, 10 A4 nuts, 10 perforated sleeves 20 x 200, 3 bit, 10
3 cutting blades, 3 applicator tip extension hoses, 3 user manual
2 M16 threaded rods, 2 anti-cold cones, 2 M12 A4 setscrews, 2 A4 washers,
Thermax 16/170 M12 B 051292 — ▯ 2 A4 nuts, 2 perforated sleeves 20 x 200, 1 bit, 1 cutting blade, 1
1 applicator tip extension hose, 1 user manual

43
 Stand-off installation Thermax

INSTALLATION DATA
Miscellaneous

td
hef tfix
ttol tWDVS
ETICS

Tinst
d0

Example for simple fixing Example for multiple fixing

Type Threaded Building Max. fixture Clamped Min. ancho- Nominal drill Drill hole depth Perforated Required Installation
rod material thickness thickness rage depth hole diameter sleeve resin quantity torque
tfix e hef do td Tinst
[mm] [mm] [mm] [mm] [mm] [Scale unit] [Nm]
Concrete/
70 14 tfix + 70 mm - 5
Thermax Solid brick
M12 60 - 1101) < 162) 20
M12/110 M12 (...) Perforated
130 20 tfix + 130 mm + 5 mm 20 x 130 26
brick
Concrete/
80 18 tfix + 80 mm - 7
Thermax Solid brick
M16 60 - 1701) < 162) 20
M16/170 M12 (...) Perforated
200 20 tfix + 200 mm + 5 mm 20 x200 40
brick
1) further usable lengths see approval
2) according to the approval the usable length up to 200 mm is possible

TECHNICAL DATA

Superbond mortar FIS SB 390 S Injection mortar FIS VT 380 C

All-round adhesive gluing and

Injection mortar FIS V 360 S
sealing KD-290

Languages on the cartridge Contents Sales unit

Approval

Item Art.-No. DIBt ETA [pcs]

FIS SB 390 S 518830 — ■ D 1 cartridge 390 ml, 2 x FIS MR 6
FIS V 360 S 041834 ▯ ■ D 1 cartridge 360 ml, 2 x FIS easy mixer 6
FIS VT 380 C 094401 — ■ D, F, NL, DK, S, TR 1 cartridge 380 ml, 2 x FIS easy mixer 12
KD-290 white (D) 059389 — — D 1 cartridge 290 ml 12
KD-290 white (GB) 046915 — — GB 1 cartridge 290 ml 12

ACCESSORIES DRILL HOLE CLEANING

Cleaning brush BS

Brush diameter For drill diameter Sales unit

Item Art.-No. [mm] [mm] [pcs]
BS ø 14 078180 16 14 1
BS ø 16/18 078181 20 16/18 1

44
Stand-off installation Thermax

ACCESSORIES DRILL HOLE CLEANING

Miscellaneous
Brush set Blow-out pump ABG

Suitable for drill diameter Sales unit

Item Art.-No. [mm] [pcs]
Brush set Ø14/20 mm 048980 8 - 16 1
Brush set Ø20/30 mm 048981 16 - 30 1
Blow-out pump ABG 089300 — 1

DISPENSER

Dispenser FIS DM S

Adapted for Sales unit

Item Art.-No. [pcs]
FIS V 360 S, FIS HB 345 S, FIS HB 150 C, FIS EM 390 S, FIS VS 150 C,
FIS DM S 511118 1
FIS P 360 S, FIS P 300 T, FIS SB 390 S, FIS PM 360 S, FIS VT 360 S and 1-K-cartridges

LOADS
Stand-off installation Thermax 12 and 16
Highest permissible loads1) 6) for one Thermax5) in concrete and solid brick masonry8) for fixing in groups2). For the design the complete
approval Z-21.8-1837 as well as the approval of the used mortar has to be considered.
Concrete and solid brick masonry
Typ Compres- Brick type, Min. Max. in- Permis- Permissible shear load for Min. Min.
sive brick naming effective stallation sible spacing3) edge
tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix = tfix =
strength acc. DIN7) anchorage torque tensile distance
62mm5) 100mm5) 120mm5) 140mm5) 160mm5) 180mm5) 200mm5) 250mm5) 300mm5) 12)
depth load
Tinst, smin
fb [-] hef, min Nperm3) Vperm3) Vperm3) Vperm3) Vperm3) Vperm3) Vperm3) Vperm3) Vperm3) Vperm3) c (a )
max
9)
(amin) min r
[N/mm²] [-] [mm] [Nm] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [mm] [mm]
Non-cracked11) and cracked concrete14)
Thermax 12 25 C20/25 70 (72)10) 20,0 3,404) 0,88 0,49 0,31 0,21 0,16 0,11 0,08 - - 55 55
Thermax 16 25 C20/25 80 (96)10) 20,0 3,404) 1,51 0,85 0,62 0,45 0,34 0,26 0,21 0,14 0,08 65 65
Solid brick Mz
Thermax 12 12 Mz 75 20,0 1,70 0,88 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 60
Thermax 16 12 Mz 75 20,0 1,70 1,51 0,85 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 60
Solid sand-lime brick and solid block KS
Thermax 12 12 KS 75 20,0 1,70 0,88 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 60
Thermax 16 12 KS 75 20,0 1,70 1,51 0,85 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 60
1)
Required safety factors are considered. up to +50°C (resp. short term up to 80°C) and drillhole cleaning according approval.
2)
For single fixation see approval. 7)
For further conditions see approval.
3)
Minimum spacing while reducing the permissible load. For combinations of tensile loads, shear 8)
Masonry with satisfactory surcharge and no edge influence.
loads, bending moments as well as reduced edge distances or spacings (anchor groups) see 9)
Fixing screw M12.
approval. 10)
Values in brackets are valid for FIS PM with Powersleeve.
4)
Corresponding to the permissible tension load of the Thermax cone. 11)
The usage of FIS V is only approved for non-cracked concrete.
5)
The permissible loads refer to the Thermax with galv. threaded rod without anchor sleeve. When 12)
Only valid for masonry with satisfactory surcharge or proof against tilting. Not valid for shear
the displacement under short term load (e.g. wind load) is limited to 1mm the closing of the loads towards the free edge.
annular gap with fischer all-round sealing KD is sufficient. For measures for displacements larger 13)
No reduction of the permissible load necessary.
than 1mm see approval, chapter 3.2.4. 14)
The usage of FIS EM and FIS PM with Powersleeve is approved in cracked and non-cracked
6)
The given loads are valid for fixations in dry and humid concrete for temperatures in the substrate concrete.

45
 Stand-off installation Thermax

LOADS
Miscellaneous

Stand-off installation Thermax 12 and 16

Highest permissible loads1) 6) 11) for one Thermax5) in hollow brick masonry8) for fixing in groups2). For the design the complete approval
Z-21.8-1837 as well as the approval of the used mortar has to be considered.
Perforated brick masonry
Type Compres- Brick type, Min. Max. Permis- Permissible shear load for Min. Min.
sive brick naming effective installati- sible spacing3) edge
t fix = t fix = t fix = t fix = t fix = t fix = t fix = t fix = t fix =
strength acc. DIN7) anchorage on torque tensile dis-
62mm5) 100mm5) 120mm5) 140mm5) 160mm5) 180mm5) 200mm5) 250mm5) 300mm5)
depth load tance12)
Tinst, s
fb [-] hef,min10) 9) Nperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) Vperm3) 4) min cmin (ar)
max (amin)
[N/mm²] [-] [mm] [Nm] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [kN] [mm] [mm]
Vertically perforated brick Hlz
Thermax 12 4 HLz 85 20,0 0,60 0,60 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 4 HLz 85 20,0 0,60 0,60 0,60 0,60 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Thermax 12 6 HLz 85 20,0 0,80 0,80 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 6 HLz 85 20,0 0,80 0,80 0,80 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Thermax 12 12 HLz 85 20,0 1,00 0,88 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 12 HLz 85 20,0 1,00 1,0 0,85 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Perforated sand-lime brick KSL
Thermax 12 4 KSL 85 20,0 0,60 0,60 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 4 KSL 85 20,0 0,60 0,60 0,60 0,60 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Thermax 12 6 KSL 85 20,0 0,80 0,80 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 6 KSL 85 20,0 0,80 0,80 0,80 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Thermax 12 12 KSL 85 20,0 1,40 0,88 0,49 0,31 0,21 0,16 0,11 0,08 - - 50 50
Thermax 16 12 KSL 85 20,0 1,40 1,40 0,85 0,62 0,45 0,34 0,26 0,21 0,14 0,08 50 50
Hollow block of lightweight aggregate concrete Hbl
Thermax 12 2 Hbl 85 20,0 0,50 0,50 0,49 0,31 0,21 0,16 0,11 0,08 - - 20013) 50
Thermax 16 2 Hbl 85 20,0 0,50 0,50 0,50 0,50 0,45 0,34 0,26 0,21 0,14 0,08 20013) 50
Thermax 12 4 Hbl 85 20,0 0,80 0,80 0,49 0,31 0,21 0,16 0,11 0,08 - - 20013) 50
Thermax 16 4 Hbl 85 20,0 0,80 0,80 0,80 0,62 0,45 0,34 0,26 0,21 0,14 0,08 20013) 50
Hollow block of normal concrete Hbn
Thermax 12 4 Hbn 85 20,0 0,80 0,80 0,49 0,31 0,21 0,16 0,11 0,08 - - 20013) 50
Thermax 16 4 Hbn 85 20,0 0,80 0,80 0,80 0,62 0,45 0,34 0,26 0,21 0,14 0,08 20013) 50
1)
Required safety factors are considered. 6)
The given loads are valid for fixations in dry and humid masonry for temperatures in the substrate
2)
For single fixation see approval. up to +50°C (resp. short term up to 80°C) and drillhole cleaning according approval.
3)
Minimum spacing while reducing the permissible load. For combinations of tensile loads, shear 7)
For further conditions see approval.
loads, bending moments as well as reduced edge distances or spacings (anchor groups) see 8)
Masonry with satisfactory surcharge and no edge influence.
approval. 9)
Fixing screw M12.
4)
Values are valid for rotary drilling (without hammer action). KSL must have a thickness of the 10)
The minimum effective anchorage applies to anchor sleeve FIS H 20x85 K
outer web of min. 30mm (old bricks). 11)
Values are valid for FIS V, Zul.-Nr. Z-21.3-1824.
5)
The permissible loads refer to the Thermax with galv. threaded rod. When the displacement under 12)
Only valid for masonry with satisfactory surcharge or proof against tilting. Not valid for shear
short term load (e.g. wind load) is limited to 1mm the closing of the annular gap with fischer loads towards the free edge.
all-round sealing KD is sufficient. For measures for displacements larger than 1mm see approval, 13)
No reduction of the permissible load necessary.
chapter 3.2.4.

46
Weather facing reconctruction system FWS II

The economical solution for the repair of triple-skin outer wall

Miscellaneous
panels

Repairing weather shells Detail: Repairing weather shells

VERSIONS APPROVALS
▪ stainless steel

BUILDING MATERIALS
▪ Triple-skin outer wall panels made of
concrete ≥ C12/15

ADVANTAGES APPLICATIONS FUNCTIONING

▪ The FWS II achieves a high shear ▪ For post-installation securing of triple- ▪ The FWS II weather facing reconstruc-
load-bearing capacity due to its large skin outer wall panels. tion anchors can be bedded in mortar
anchor diameter. This reduces the ▪ Strengthening outer wall panels for into the load-bearing skin and weather
number of reconstruction anchors additional exterior insulation. shell with the FIS V, FIS VW or FIS VS
needed for each plate to a minimum, injection mortar.
thus saving costs. ▪ The red plastic coating protects the
▪ The drill hole can be drilled  in one insulation from being penetrated with
step using standard diamond drill bits. mortar.
This ensures quick progress is made. ▪ You can see the correct anchor filling
▪ Installation is already approved from a with the weather shell through the
sub-base thickness ≥ 80mm. inspection openings on the head of
▪ Approval with a new measuring the anchor.
strategy allows a safer and economi-
cally static calculation while making
it possible to document loads from
temperature changes.
▪ It is available in three lengths (special
lengths according to your specifica-
tions).

47
 Weather facing reconctruction system FWS II

INSTALLATION
Miscellaneous

TECHNICAL DATA
l
hef

Weather facing reconstruction system

FWS II - A

d0
Total length Nom. drill diameter Effect. anchorage depth Anchors per cartridge Sales unit
Approval

in the load-bearing skin FIS V / FIS VS / FIS VW

360 ml
l d0 hef
Art.-No. DIBt [mm] [mm] [mm] [pcs]
Item
FWS II - A 180 532883 ▯ 180 40 - 41 70 5 5
FWS II - A 205 532884 ▯ 205 40 - 41 70 5 5
FWS II - A 230 532885 ▯ 230 40 - 41 70 5 5

TECHNICAL DATA

Injection mortar FIS V 360 S Dispenser FIS DM S

Languages on the cartridge Scale unit Contents Sales unit

Approval

Item Art.-No. DIBt ETA [pcs]

FIS V 360 S 094404 ▯ ■ D, F, NL, TR, H, RUS 180 1 cartridge 360 ml, 2 x FIS easy mixer 6
FIS DM S 511118 — — — — — 1

48
The information in this brochure is intended for general
guidance only and is given without engagement. Additional
information and advice on specific applications is available from
our Technical Support Team. For this however, we require a pre-
cise description of your particular application.
All the data in this brochure concerning work with our fixing
elements must be adapted to suit local conditions and the type of
materials in use.
If no detailed performance specifications are given for certain
articles and types, please contact our Technical Service
Department for advice.

fischerwerke GmbH & Co. KG

72178 Waldachtal
Germany

We cannot be responsible for any errors, and we reserve the right

to make technical and range modifications without notice.
No liability is accepted for printing errors and omissions.
06-2015

Contacts

fischerwerke GmbH & Co. KG

Klaus-Fischer-Straße 1
72176 Waldachtal
Germany
Phone (0049) 7443 12-0
Fax (0049) 7443 12-4222
E-mail [email protected]

118163(7) · 06/2015 · V-MKS/MP · Printed in Germany · Subject to technical alternations without notice
www.fischer.de

fischer fixings UK Ltd.

Whitely Road
Oxon OX10 9AT Wallingford
Great Britain
Phone (0044) 1491 827900
Fax (0044) 1491 827953
E-mail [email protected]
www.fischer.co.uk

fischer Systems Asia Pte. Ltd.

150 Kampong Ampat
#04-03 KA Centre
Singapore 368324
Phone (0065) 62 85 22 07
Fax (0065) 62 85 83 10
E-mail [email protected]

Your dealer:

www.fischer.de