Scribd
Upload
101 views1 page

Wiring Table: FAQ ID: 9992646

This document provides wiring instructions for connecting a safety monitor with an RJ45 connector to a PC with an RS232 socket using a 4-pole flat cable. It specifies that the brown wire should connect to pin 2, green to pin 3, and yellow to pin 5. It cautions that additional wire cores need to be cut at both ends when inserted into the flat cable.

Uploaded by

karangoyals03
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views1 page

Wiring Table: FAQ ID: 9992646

This document provides wiring instructions for connecting a safety monitor with an RJ45 connector to a PC with an RS232 socket using a 4-pole flat cable. It specifies that the brown wire should connect to pin 2, green to pin 3, and yellow to pin 5. It cautions that additional wire cores need to be cut at both ends when inserted into the flat cable.

Uploaded by

karangoyals03
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

FAQ ID: 9992646

Wiring table
Cable between safety-monitor (RJ45) and PC (RS232)

Plug 8-pol RJ45 Core Socket 9-polig SUB-D


Pin Color Pin

6 Brown 2
7 Green 3
8 Yellow 5

4-pole flat cable / telephone cable

Caution:
Further cores must cut at both ends
(e. g. white core into the flat cable)

Plug 8-pol RJ45

Siemens AG
Digital Factory Division Date 25.07.2017
Control Products Page 1 of 1 +49 911 895 5900
Technical Assistance

You might also like