IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.
Net
IT Essentials (ITE v6.0) Chapter 2 Exam Answers
100% 2016
1. A new technician has joined the IT team and is about to service a heavy printer.
What advice would you give this technician to avoid any injury when transporting
the heavy printer to the service area?
o Bend your knees to use the strength in your legs to lift the printer.
o Avoid bending your knees when lifting the printer.
o Bend your back to pick the printer up.
o Use your arms and back to lift the printer.
2. How does an inline UPS protect computer equipment against electrical power
brownouts and blackouts?
o by grounding excess electrical voltage
o by using a battery to supply a constant level of voltage
o by switching from main power to a standby power source
o by stopping the flow of voltage to the computer
3. Which circumstance increases the likelihood of ESD damage to a computer?
o working in low levels of humidity
o using a magnetic screwdriver while working on a hard drive
o plugging a printer into an UPS
o self grounding against the computer case
4. Which condition refers to a reduced voltage level of AC power that lasts for an
extended period of time?
o Brownout
o Sag
CCNA 5 Page 1
IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.Net
o Spike
o Surge
5. What are two significant sources of EMI? (Choose two.)
o infrared mice
o RAM modules
o electrical storms
o LCD monitors
o power lines
6. A technician is unpacking a new PCIe video adapter from an antistatic bag to
install the card in a desktop computer. Which two measures should the technician
use to protect the card and other computer components? (Choose two.)
o Use a grounded mat on the workbench.
o Use a correctly connected antistatic wrist strap.
o Shield the card and computer from sources of EMI.
o Ensure that the workplace has a low humidity environment.
o Connect the computer to a UPS while installing the card.
7. How should a technician dispose of an empty inkjet printer cartridge?
o Refill it.
o Throw it away.
o Follow local regulations for disposal.
o Give it back to the customer.
8. What makes CRT monitor disposal dangerous for a technician who is handling the
disposal?
CCNA 5 Page 2
IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.Net
o potential breathing hazards
o potential explosive materials
o potential residual high voltage
o potential health-damaging chemicals
9. A technician is troubleshooting connectivity issues to a PC and needs to verify
which cable is plugged into the correct port of the patch panel. What tool should
the technician use?
o Multimeter
o toner probe
o punch down
o crimper
10. Which tool is designed to loosen or tighten crosshead screws?
o phillips screwdriver
o hex driver
o flat head screwdriver
o torx driver
11. What tool would a technician use to remove a slotted screw?
o flat head screwdriver
o hex driver
o needle-nosed pliers
o Phillips head screwdriver
o Torx screwdriver
CCNA 5 Page 3
IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.Net
12. Which tool in Windows OS gives a technician access to initialize disks and create
partitions?
o Optimize Drives
o Disk Cleanup
o Disk Management
o Format
o Scandisk
13. Which Windows OS tool scans the critical files of the operating system and
replaces any files that have been corrupted?
o Chkdsk
o Defrag
o Disk Cleanup
o Disk Management
o Scan System
o System File Checker
14. Which tool should be used if a user needs to optimize space on a hard drive?
o Optimize Drives
o Disk Management
o Fdisk
o Format
15. Why is documentation of all services and repairs an important organizational tool
for a technician?
o It increases the cost of services and repairs.
o It allows the public sharing of information on the Internet.
CCNA 5 Page 4
IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.Net
o It reduces the technical skills required of new technicians.
o It provides reference material for similar problems when they are encountered in the
future.
16. Which tool could potentially cause data loss on hard disk or floppy drives?
o a magnetic screwdriver
o compressed air
o a lead pencil
o a computer vacuum cleaner
17. Why should an antistatic wrist strap be worn when working on electronic
equipment?
o to prevent interference from clothing and loose jewelry
o to equalize the electrical charge between a person and the equipment
o to prevent clothing made of silk, polyester, or wool from generating a static charge
o to draw static electricity away from a component and transfer it safely from equipment to
a grounding point
18. Which precaution should be taken when working inside computer systems?
o Avoid using magnetized tools.
o Leave the power cord attached to an outlet for grounding.
o Wear ESD protection to repair monitors in humid environments.
o Avoid using ESD wrist straps and ESD mats simultaneously.
19. Which cleaning solution is recommended to clean the contacts of computer
components?
o rubbing alcohol
o isopropyl alcohol
o glass cleaner with ammonia
o water that is mixed with a small amount of dishwashing liquid
20. Why should a pencil never be used as a tool when working inside a computer?
o Pencil lead is corrosive.
o Pencil lead is conductive.
o A pencil can hold a static charge.
CCNA 5 Page 5
IT Essentials (ITE v6.0) Chapter 2 Exam Answers 100% 2016 WWW.CCNA-v5.Net
o The lead in a pencil can induce current.
21. A technician suspects that a power supply is faulty. How can it be checked?
o by checking the temperature of the power supply
o by using a multimeter
o by taking apart the power supply
o by powering up the PC after disconnecting each connector in turn
22. Match the steps of fire extinguisher operation to the order in which they should be
completed. (Not all options are used.)
o Question
ITE Chapter 2 Exam v6 Question 001
o Answer
ITE Chapter 2 Exam v6 Answer 001
CCNA 5 Page 6
