User Manual

Key points of software

1. Image quality shall be over 80%.

2. Start Display Platform-- Setting button - Check AutoExposure

camera. Make sure not to check camera two; otherwise, main camera

can not be opened. For some laptops, please do not check the camera;

otherwise, the main camera may not open, and the

document camera scanner may not work normally.

Key points of document camera scanner

1. After software installation, the instrument can not work

Check whether the instrument is properly connected by clicking

options “Computer - Property - Device manager - Image device” to

see if there is a name of the instrument listed; if not, please replace the

host’s USB port; if yes, right click unload, pull out and plug again the

instrument’s USB port.

First, check if it is the highest resolution. FZ500’s highest resolution is

2592*1944 pixels, while that of L1000, H1000 and L1TS is

3264*2448 pixels. If the picture is still blur at the highest resolution, it

may be the problem about foci; for local blur or blur corner of FZ500,

just slightly turn the camera and have a try again; if it looks worse,

turn the camera at reserve direction until the best effect achieved. For

L1000, there are 4 small cubes in the camera, so please push them

with penpoint or toothpick to twist slowly; afterwards, if it looks

worse, push them at reserve direction. As to H1000 and L1TS, they

have fixed focus, which is not adjustable.

3. Apple (Mac) Computer

The software corresponding to MAC system is placed in SD card,

with the suitability for MAC system installation indicated.

B. Hardware Connection.............................................................................1

C. Software installation .......................................... 错误！未定义书签。

D. Software Apllication instruction ......................... 错误！未定义书签。

1. Capture ................................................. 错误！未定义书签。

2. Whteboard ............................................................................... 11

3. Image Contrast ..........................................................................13

4.Visual presentation .....................................................................14

5.Others assistant functions ..........................................................19

6.Image Editing ...........................................................................23

Thanks you!
Product Installation
A. Hardware Connection
Cam scanner is connected with PC by USB cable.
After connection,the PC will find the hardware and install driver automatically.
Pls kindly make sure the USB port of PC is working! Or the scanner can not work properly due to this
matter!

B. Software Installation
(The main Software will around 200MB hardware space. To make sure you have

enough space for installation and scanner working properly,pls remain 1GB hard-disk

space.)

In the packing of the scanner,there is a CD. Run the CD in PC,it will pop up(or double click to pop

up) a window as below:

Then pls click "Install scan App" to install the Main software.

1
C. Software application instruction

The Main software have a sum of buttons for different functions and operations. According to you

need to choose them.here is the instruction as follow：

Above tool bar including functions as follows：

1.Capture
Click 【Lampscan Capture】，

Then it will pop up below window：

2
Prepare your document under the scanner. There will be detect green line to catch your document

size.And before scanning,you may need to adjust below data according to your requirement.

Device, resolution, image format, file type etc...

3
This software support several camera device,you can choose them according to your need.

And you can select the resolution:

4
Multi Cards scan in the same time:

And Scan to different image format:

For the scan type,you can get different color image color,gray,binary by choose scan mode:

For the most case,image may contain extra border out of the document,this function would help to

5
cut these borders and correct the image.

when you scan a ID card,however

Advanced functions

You can use a fast OCR here.

6
Click on it, and choose Language, then scan. It will come out scanned image and word format

after OCR directly.

Image compression

According to you need, you can adjust the compression rate( higher or lower) to have a proper size

image for you.

Camera Two

Here it support double camera displaying. When you are opening main camera, you can add one

more camera. Pls click below and choose according camera showing,and also resolution.

Then it will show as below window.

7
Click "Combine" then press main camera "capture" to have a combined image.

Image preview

This software support image preview during scanning for user's convenience which traditional

scanner can not. Below pls see the tools：

1. Catching and moving hand.

2. Capture specific zone.

3. Right rotation.

8
4. Left rotation.

5. Zoom in and Zoom out.

6. Full screen

Full screen

To fit video displaying and visual education by scanner,this software support full screen to larger

the screen for user to show operation under scanner：

File named setting

To make convenience for user to do document management,this software support to name the

scanned image by user need. User can set the Name rule by going into "Namerule"：

9
Named by time or designed by yourself.

Continuous Capture

To make scan faster when user have a sum of documents for scanning.

This software support continuous capturing. Click "shoot" button, click start, when you put the

paper in the screen, this software will detect the paper automatically and scan：

10
2. White board
Click "Start whiteboard" to start whiteboard.

Then,it will pop up one tool bar on left as follow:

1. click to close the whiteboard window.

2. click to leave whiteboard status,click again to come back whiteboard status.

3. for drawing

11
4. for drawing

5. for drawing

6. for hand drawing ,and it will disappear after 3 seconds.

7. Eraser for above drawing.

8. for deleting above drawing.

9. for selecting the size of line.

10. for selecting line style

11. for selecting color

12
12. for adjusting transparent rate

13. for drawing different shape.

14. to save above change.

3. Image Contrast

Click "start image Contrast" to compare image

You can select here the Number of image for comparing (Max 4 pictures.)

13
4. Visual presentation:

Then,it will pop up one tool bar on left as follow:

14
15. click to close the whiteboard window.

16. click to leave whiteboard status,click again to come back whiteboard status.

17. for drawing

18. for drawing

19. for drawing

20. for hand drawing ,and it will disappear after 3 seconds.

21. Eraser for above drawing.

22. for deleting above drawing.

23. for selecting the size of line.

15
24. for selecting line style

25. for selecting color

26. for adjusting transparent rate

27. for drawing different shape.

28. to save above change.

And there is another tool bar under the screen for Kinghunshow as below:

29. Adjust the setting data to control the video effect. Here you can adjust brightness,Contrast,

Saturation.

Directory : setting the save path of picture took and videos recorded .

Device list : to view exist device and select accordingly.

Video freeze and Video play : stop playing and replaying video.

16
30. Open assist Camera.

31. Zoom in and Zoom out.

17
32. 1:1 show full fit.

33. Best suitable window.

34. High speed showing, click it to change the resolution to 1024*768 .

35. High quality showing, click it to change the resolution to 2592*1944

36. Left and right rotate the screen.

37. Turn to KinghunView to compare the picture you took.

38. Take picture.

18
39. Record video.

It will pop up a window after recorded.

40. Minium the window.

41. Full screen showing.

42. Close video presentation.

5. Others assistant Functions:

Click it to Fast OCR as below:

19
Choose images and language to fast OCR.

44. Merge pictures into PDF

Click it to have below window:

20
Choose images to merge into PDF.

45. Merge pictures into TIFF.

Click to have below window:

21
Choose image to convert into TIFF.

46. Send email.

Send picture by email with Outlook.

47. Share pictures.

Share Picture to Iphone

48. Print and playback

22
49. Image browsing:

6. Image Editing

There is the Tool bar as below:

23
1. Paste

Paste the captured image to combine to the main picture, as below:

2. Select

Click and Draw it on a specific zone of the picture being showed, as below:

24
Double click to cut it.

And select cut and copy for this specific zone:

25
Cut:

Click "copy " to cope this zone.

Crop & resize & Rotate :

26
Crop : to cut the specific zone select as below :

Resize : to have below window:

27
Choose the percentage of size of the image,and to make image tilt or Angel on the particular

degree. As below:

Rotation :

28
See below specification to select them to rotate the image.

The second part:

1. to be a hand to catch and move image.

2. to enter words:

29
3. Eraser

Click to clean the color to white.

4. Highlight shadow:

5.

Click it to select a specific zone to be highlighted.

6. Draw ellipse.

30
7. Hand Drawing.

31
8. Draw a straight line.

9. Stamp tool:

Click it to have below window:

32
Click Add a new group.

Enter the name and OK. The software will keep your group.

33
Then add a new stamp:

Click this new stamp, and press "OK",then the stamp will appear at the edited image:

34
10. Paint with Bucket:

Choose the color and paint the pictures.

35
11. Draw Rectangles:

36
12. Line Size:

Here is to adjust the size of line of drawing:

37
13. Click here to Edit the words entering and color of line.

14. To have fast OCR here, same as above fast OCR.

15. Auto correction:

38
16. Gray & Binary & Negative

To have different effect of image as below

And also other Image enhance functions as below :

17. Bar code reading:

Click and catch the barcode.

And then it will show barcode Nr:

39
Besides editing scanned image,you can also choose pictures from your PC to
edit them. Choose from the left side directory:

40