Scribd
Upload
817 views

Running Tools

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
817 views

Running Tools

Uploaded by

azze bouz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HALLIBURTON

RUNNING TOOLS
Otis® X® and R® Running Tools are used to set Otis X®,
XN®, R®, RN®, and RQ Lock Mandrels in their respec-
tive Otis Landing Nipples. These tools are similar in
design to nipple locator dogs, serving to locate the
proper landing nipple and positioning the lock mandrel
before locating and locking. By selecting the position of
the running tool, the lock mandrel keys may be placed
in the locating or retracted position.

Otis RXN Running Tools set Otis X, XN, R, RN,


RPT™, and RQ Lock Mandrels in their respective
landing nipples. This tool is generally used for install-
ing tubing safety valves in the uppermost landing
nipple. With this tool, the lock mandrel may be run
with the keys in the control or locating positions. The

CN03575
lock mandrel keys or no-go serve to locate the nipple
rather than the dogs on the running tool. When a non-
no-go lock is being run, the keys must be run in the Otis® RXN
locating position and the lock must be set in the first Running Tool
nipple in the bore of that lock size. The tool gives a
positive indication when the lock is fully set.

Otis SAFETYSET® Running Tools are used to set


Halliburton Surface-Controlled, Wireline-Retrievable

CN03576
Safety Valves on Otis RP and RQ Lock Mandrels. Two
independent conditions must exist in sequence before
the running tool will release the valve and lock. The
SCSSV must be pressured open to activate the running Otis® X® or R®
tool. Only when the locking sleeve is locked in place Running Tool
will the running tool release. A running tool retrieved
to the surface without the lock and valve indicates a
functional valve securely locked in the landing nipple.
For more information on Otis SAFETYSET lock sys-
tems, please refer to the “Subsurface Flow Control”
section of this catalog.

Otis MR Running Tools are used to run Otis XNS and


RNS Soft Set Bomb Hangers. This running tool is
designed to carry weight exceeding the 140 lb
(63.50 kg) weight limit of hydraulic running tools,
because no preset force needs to be overcome.
CN03577

CN03578

The lugs of the running tool hold the fish neck of the
bomb hanger during the running of the bombs. The
lugs are held in the expanded position by the core in
the fully down position. When the bomb hanger locks Otis® SAFETYSET® Otis® MR
into the nipple profile, the lock moves upward pushing Running Tool Running Tool
the core up by means of the core extension. Once the
core is pushed up, the lock-out lug can then be pushed Ordering Information
into the core recess by the leaf spring, thus locking the Specify: lock mandrel type and size, or running tool type and size (SS, MR,
core in the up position. In the up position, the core no RXN, X®, R®).
Part number prefix: all wireline running tools carry a numeric prefix 41
longer holds the lugs out and the running tool is followed by the alpha characters defining the type running tool as above; for
disengaged from the hanger. The bomb hanger and example, 41SS is the prefix for SS running tools
pressure gauges are left suspended in the well.

3-32 SUBSURFACE FLOW CONTROLS

You might also like