Scribd
Upload
74 views1 page

Ratings & Standards

This document provides engine ratings and fuel consumption specifications for a model F18GL/GLD engine with an 11:1 compression ratio. It lists the ISO standard continuous power ratings at different RPM levels between 1400-1800 RPM, which range from 310-400 brake horsepower. It also includes a graph showing brake-specific fuel consumption in Btu/bhp-hr at varying power levels and RPM. Notes provide additional details on the engine configuration, testing standards, and emissions level.

Uploaded by

Alfredo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views1 page

Ratings & Standards

This document provides engine ratings and fuel consumption specifications for a model F18GL/GLD engine with an 11:1 compression ratio. It lists the ISO standard continuous power ratings at different RPM levels between 1400-1800 RPM, which range from 310-400 brake horsepower. It also includes a graph showing brake-specific fuel consumption in Btu/bhp-hr at varying power levels and RPM. Notes provide additional details on the engine configuration, testing standards, and emissions level.

Uploaded by

Alfredo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

RATINGS & STANDARDS

ENGINE RATINGS AND FUEL CONSUMPTION


2
ISO STANDARD (CONTINUOUS) RATINGS FOR MODEL F18GL / GLD
130° F (54.5° C) AUXILIARY WATER TEMPERATURE
180° F (82° C) JACKET WATER TEMPERATURE

PART LOAD FUEL CONSUMPTION


WASTEGATES SET AT CONTINUOUS POWER RATING

10000

BSFC @ 1400 RPM


9500
BSFC @ 1500 RPM
BSFC @ 1600 RPM
BSFC @ 1700 RPM
9000 BSFC @ 1800 RPM
(kJ/kWh = 1.414 x Btu/bhp-hr)
BSFC -- Btu/bhp-hr

8500

8000

7500

7000

6500
50 100 150 200 250 300 350 400 450 500
BHP

RPM 1400 1500 1600 1700 1800


CONTINUOUS BHP 310 335 355 375 400
OVERLOAD BHP 340 365 390 415 440

OVERLOAD Allowed 2 Hours per 24 Hours


Barometer Ambient Temperature
STANDARD CONDITIONS
29.54 in. Hg (100 kPa) 77o F (25o C)
2 Percent per 1000 ft. (305 m) above 1500 ft. (457 m) Altitude
DEDUCTIONS
1 Percent per 10o F (5.5o C) above 100o F (38o C) Ambient Temperature
Dry Natural Gas – 900 Btu/ft3 (35.38 MJ/m3) SLHV; 91 WKI
FUEL
Refer to S-7884-6 for Full Fuel Specification
EQUIPMENT Engine Equipped with Lube Oil and Cooling Water Pumps but without Radiator Fan
Turbocharged & Intercooled with 130o F (54.5o C) Intercooler Water
ENGINE DATA
11:1 Compression Ratio

NOTES:
1. ISO Standard (continuous) power ratings conform to ISO 3046/1, latest version, with a mechanical efficiency of 90% and auxiliary
water temperature, Tcra, of 130o F (54.5o C) limited to ± 10o F (± 5.5o C).
2. Reference Heat Rejection and Operating Data Standard Sheet S-7775-45.
3. Engine set to an exhaust oxygen concentration of 7.8% at rated speed and ISO Standard Power at 13o BTDC timing with J-type
spark plugs or at 15o BTDC timing with 4-ground spark plugs to provide a NOx emission level of 2 g/bhp-hr or less.
4. Low pressure (draw thru) fuel system on the GLD model.

Page 1 of 1

ENGINE RATING & FUEL CONSUMPTION Ref.


EN: 122553
MODEL F18GL/GLD, 11:1 CR, 7.8% O2
C
130° F AUX WATER TEMPERATURE DATE: 4/99
180° F JACKET WATER TEMPERATURE 1100-17

You might also like