Scribd
Upload
75 views2 pages

Quality Control Form: N/A UP Hill Down Hill

This document is a welding procedure specification form containing details of a welding process, including: - Joint design and base/filler materials - Preheat and postweld heat treatment requirements - Welding positions, processes, and parameters - Consumables, electrical characteristics, and techniques It provides a checklist for welding engineers, QA/QC managers, and company approvers to ensure all necessary information is specified for a welding procedure.

Uploaded by

Alesol Equipment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
75 views2 pages

Quality Control Form: N/A UP Hill Down Hill

This document is a welding procedure specification form containing details of a welding process, including: - Joint design and base/filler materials - Preheat and postweld heat treatment requirements - Welding positions, processes, and parameters - Consumables, electrical characteristics, and techniques It provides a checklist for welding engineers, QA/QC managers, and company approvers to ensure all necessary information is specified for a welding procedure.

Uploaded by

Alesol Equipment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

www.Inspection-for-Industry.

com
WELDING PROCEDURE SPECIFICATION
Quality Control Form
PROJECT SPECIFICATION NO: TEST PERFORMED DATE:
PQR NO: IMPACT TEST: YES NO
WELDING PROCESS: WPS NO:
WELDING TYPE: MANUAL SEMI-AUTOMATIC MACHINE AUTOMATIC
JOINTS DESIGN (QW-402) JOIMT DETAILS & SEQUENCE OF BEADS
JOINTS DESIGN
BACKING: NO YES
BACKING MATERIAL OR TYPE:
RETAINER:
OTHES:

BASE MATERIALS (QW-403)


P-No: Gr.No: TO P-No: Gr.No:
Spec, Type and Grade:

DIAMETER RANGE GROOVE:


THICKNESS RANGE GROOVE:
FILLER METALS (QW-404) PREHEAT (QW-406)
SFA No: PREHET TEMP(MIN 'C)/CHECK/CONTROL:
AWS CLASSIFICATION:
F No/A No: PREHEAT METHOD:
MANUFACTURE: PREHEAT MAINTNANCE:
DEPOSIT THICKNESS QUALIFIED RANGE: INTER PASS TEMP(Max 'C):
SIZE (mm): INTER PASS CHECK:
RUN-OUT-LENGTH: INTER PASS TEMP CONTROL:
ARC TIME: PWHT (QW-407) YES NO
NUMBER OF BEAD: HOLDING TEMP RANGE:
FLUX TRADE NAME: MIN. HOLDING TIME:
ELECTRIC FLUX (Class) HEATING RATE:
OTHERS: COOLING RATE:
POSITION (QW-405) SHIELDING GAS AND FLOW RAET (QW-408)
GROOVE: SHIELDING/FLOW RATE:
WELDING PROGRESSION: N/A UP hill Down hill TRAILING/FLOW RATE:
FILLET: BACKING/FLOW RATE:
OTHERS:

PREPARED BY: WELDIND ENGINEER NAME/SIGN: DATE:

CHECKED BY: QA/QC MANAGER NAME/SIGN: DATE:

APPROVED BY: COMPANY NAME/SIGN: DATE:


WELDING PROCEDURE SPECIFICATION

PROJECT SPECIFICATION NO: WPS NO:


ELECTRICAL CHARACTERISTICS (QW-409)
CURRENT AND POLARITY:
TUNGSTEN ELECTRODE SIZE AND TYPE:
MODE OF METAL TRANSFER FOR GMAW / FCAW:
ELECTRODE WIRE FEED SPEED RANGE (cm/min):
MAX HEAT INPUT (Kj/cm):
OTHERS:

TECHNIQUE (QW-410)
BEAD: BOTH STRING WAVE
ORIFICE /GAS CUP SIZE:
OSCILLATION WIDTH AND FREQUENCY:
CONTACT TUBE TO WORK DISTANCE:
MULTIPLE OR SINGLE PASS (PER SIDE):
PEENING:
JOINT PREPARATION & CLEANING:
METHOD OF BACK GOUGING:
OTHERS:

WELD CONSUMABLE ELECTRICAL CHARACTERISTICS TRAVEL SPEED BRAND


PROCESS
BEAD NO. CLASS DIA(mm) POLARITY AMPERAGE VOLTAGE (cm/minute) NAME

REMARKS :

PREPARED BY: WELDIND ENGINEER NAME/SIGN: DATE:

CHECKED BY: QA/QC MANAGER NAME/SIGN: DATE:

APPROVED BY: COMPANY NAME/SIGN: DATE:

You might also like