Scribd
Upload
293 views2 pages

A3 Ads-B Antenna1090 MHZ: Data Sheet

This document describes an A3 ADS-B 1090 MHz antenna, including its technical specifications and mounting details. The antenna has a gain of 4.8 dBi, impedance of 50 ohms, and radiation patterns of 360 degrees omnidirectional in the H-plane and a beamwidth of 23.8 degrees in the E-plane. It is designed to operate at the 1090 MHz frequency for ADS-B systems. The document also provides information on the antenna's mechanical properties, electrical certifications, and included mounting bracket.

Uploaded by

Abolfazl Yousef Zamanian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
293 views2 pages

A3 Ads-B Antenna1090 MHZ: Data Sheet

This document describes an A3 ADS-B 1090 MHz antenna, including its technical specifications and mounting details. The antenna has a gain of 4.8 dBi, impedance of 50 ohms, and radiation patterns of 360 degrees omnidirectional in the H-plane and a beamwidth of 23.8 degrees in the E-plane. It is designed to operate at the 1090 MHz frequency for ADS-B systems. The document also provides information on the antenna's mechanical properties, electrical certifications, and included mounting bracket.

Uploaded by

Abolfazl Yousef Zamanian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Typical Radiation Pattern in E-plane at 1090 MHz

Data Sheet

A3 ADS-B
Antenna1090 MHz
V4A Type
for Extreme Environment
Typical Gain Diagram vs. Frequency

Typical S.W.R Response


S.W.R. Model: SCO-1,09-5 File: F-03-058
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
MIL-STD-810G qualified
1.4
1.2
1.0
990 1090 1190
f.(MHz)

This document decribes the jetvision A3 ADS-B 1090 MHz Antenna


with its technical data and mounting.
Günter Köllner Embedded Development GmbH Version 1.0.0 - 04.2017
Am Rain 24
85256 Vierkirchen, Germany
Phone +49 8139.9961909 - Fax +49 8139.9961906
www.jetvision.de [email protected]
Specifications Mounting
Electrical Data A3 ADS-B 1090 MHz
V4A Steel Fixing Bracket
V4A Steel
Type Ground plane colinear 3x 1/2 λ

Design Frequency 1090 MHz (ADS-B system)

Impedance 50 Ω

Radiation (H-plane) 360° omnidirectional

Radiation (E-plane) Beamwidth @ -3 dB: 23.8° Fixing Bracket Part List


Polarization Linear vertical Quantity Description

Gain 4.8 dBi 1 Mounting bracket V4A

Maximum Transmit Power 10 W CW, 500 W peak 2 Mounting lug V4A

Grounding Protection All metal parts are DC-grounded, the inner conductor shows an open circuit 2 M8x120 bolt V4A

Certification MIL-STD-810G, method 509.5 (48/48h) 6 M8 hexagonal nut V4A

Connector N-female, gold plated central pin 2 M8 washer V4A


4 Spring lock washer V4A

Mechanical Data A3 ADS-B 1090 MHz Fixing Bracket Materials & Dimensions
V4A Steel Materials V4A steel
Housing & Radome Material Fiberglass, chromed brass, PCB Hardware V4A steel
Fields of Application Off shore, seawater resistant Dimensions 120 x 80 x 30 mm
Bracket, Hardware Material V4A steel, V4A steel Weight 600 g
Wind Load / Resistance 18 N @ 150 Km/h / 200 Km/h

Wind Surface 0.013 m2

Height (approx.) 555 mm

Weight (approx.) With bracket: 925 gr. Without bracket: 325 g Mast not supplied
Installation Type Mast: Ø 20-52 mm
Bottom View with Antenna Socket
Part Number 67305

High Performance ADS-B Equipment REMARK


Locking nut.
Professional ADS-B Receiver, MLAT-Server Do not release! Ø20-52mm
antennas and accessories

Own development, special solutions and more...

You might also like