Scribd
Upload
123 views3 pages

1-To-8 4K HDMI Distribution Amplifier: HD-DA8-4K-E

The Crestron HD-DA8-4K-E is a distribution amplifier that splits a single HDMI input signal to eight outputs. It supports resolutions up to 4K and handles HDCP, 3D, Deep Color, and high-bitrate audio. No programming is required for operation.

Uploaded by

thomvalensi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views3 pages

1-To-8 4K HDMI Distribution Amplifier: HD-DA8-4K-E

The Crestron HD-DA8-4K-E is a distribution amplifier that splits a single HDMI input signal to eight outputs. It supports resolutions up to 4K and handles HDCP, 3D, Deep Color, and high-bitrate audio. No programming is required for operation.

Uploaded by

thomvalensi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

HD-DA8-4K-E

1-to-8 4K HDMI® Distribution Amplifier


>> Splits one HDMI® source to eight outputs
>> Handles video resolutions up to 4K and Ultra HD
>> Handles 3D video and Deep Color
>> Handles Dolby® TrueHD, Dolby Atmos®,
DTS-HD®, and uncompressed 7.1 linear
PCM audio
>> HDCP compliant
>> Includes input and output sync indicators
>> No programming or control system required
>> Thin profile — less than one inch deep
>> Surface, shelf, or single rack rail mountable

The Crestron® HD-DA8-4K-E is a simple to use, high-performance Communications


distribution amplifier designed to split a single HDMI® signal to feed up
to eight separate displays, switchers, AV receivers, and other devices. It HDMI:  HDCP & EDID (does not pass CEC)
handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support EDID:  Mode selectable for COPY 1ST or DEFAULT:
for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or • COPY IST copies the EDID from the device connected to OUTPUT 1
control system is required for operation. and sends it to the source connected to the INPUT [2]
• DEFAULT = 720x480@60Hz, 1280x720@60Hz, 1920x1080@30Hz,
For smaller applications, please see the two-output HD-DA2-4K-E and the 1920x1080@60Hz (preferred), and 2-channel linear PCM audio)
four-output HD-DA4-4K-E.
Connectors

SPECIFICATIONS INPUT:  (1) 19-pin Type A HDMI female;


HDMI digital video/audio input;
Video Also supports DVI and Dual-Mode DisplayPort [1]
Input Signal Types:  HDMI® w/Deep Color, 3D, & 4K (DVI & Dual-Mode OUTPUT 1 – 8:  (8) 19-pin Type A HDMI female;
DisplayPort compatible [1]) HDMI digital video/audio outputs;
Output Signal Types:  HDMI w/Deep Color, 3D, & 4K (DVI compatible [1]) Also supports DVI [1]
Maximum Resolutions:  SERVICE:  (1) USB Type Mini-B jack;
Scan Frame Color Color For factory use only
Resolution
Type Rate Sampling Depth
24VDC 0.75A:  (1) 2.1 x 5.5 mm DC power connector;
24 Hz 4:4:4 30 bit 24 Volt DC power input;
4096x2160 4K DCI
30 Hz 4:4:4 24 bit PW-2407WU power pack included
&
30 Hz 4:2:2 36 bit
Progressive 3840x2160 Ultra HD Controls & Indicators
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit PWR:  (1) Green LED, indicates operating power supplied via power pack
INPUT:  (1) Green LED, indicates a video signal at the HDMI input
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
OUTPUT 1 – 8:  (8) Green LEDs, indicate video signals at each
Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit corresponding HDMI output
NOTE: Common resolutions are shown; other custom resolutions are EDID:  (1) 2-position slide switch, selects EDID mode
supported at pixel clock rates up to 300 MHz
Power Requirements
Audio
Power Pack:  0.75 Amps @ 24 Volts DC;
Input Signal Types:  HDMI (Dual-Mode DisplayPort compatible [1]) 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
Output Signal Type:  HDMI Power Consumption:  13.5 Watts typical
Formats:  Dolby Digital®, Dolby Digital EX, Dolby Digital Plus,
Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24,
DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels

crestron.com | 800.237.2041
HD-DA8-4K-E  1-to-8 4K HDMI® Distribution Amplifier

HD-DA8-4K-E – Top View

HD-DA8-4K-E – Bottom View

Environmental Notes:

Temperature:  32° to 104° F (0° to 40° C) 1.  HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode
DisplayPort signal. CBL-HD-DVI interface cables are available separately.
Humidity:  10% to 90% RH (non-condensing) 2.  Using the COPY 1ST mode, if the device connected to OUTPUT 1 is disconnected, the current
Heat Dissipation:  46.1 BTU/hr EDID will be retained. Changing the device connected to OUTPUT 1 will not update the EDID at
the INPUT until the EDID switch is moved to the DEFAULT position and then back to the COPY
Enclosure 1ST position.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please
Chassis:  Metal, black finish, with (2) integral mounting flanges contact the Crestron sales representative for your area. A list of sales representatives is available
Mounting:  Freestanding, surface mount, or attach to a single rack rail online at www.crestron.com/salesreps or by calling 800-237-2041.

Dimensions The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit
Height:  4.06 in (104 mm) www.crestron.com/opensource.
Width:  12.78 in (325 mm)
Depth:  0.87 in (23 mm) Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron
Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital
are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or
Weight other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered
trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are
1.79 lb (0.81 kg):  either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or
other countries. Other trademarks, registered trademarks, and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Crestron
MODELS & ACCESSORIES disclaims any proprietary interest in the marks and names of others. Crestron is not responsible
for errors in typography or photography. Specifications are subject to change without notice.
©2016 Crestron Electronics, Inc.
Available Models
HD-DA8-4K-E:  1-to-8 4K HDMI® Distribution Amplifier

Included Accessories
PW-2407WU:  Wall Mount Power Pack 24VDC, 0.75A, Universal
(Qty. 1
included)

Available Accessories
CBL Series:  Crestron® Certified Interface Cables

crestron.com | 800.237.2041
HD-DA8-4K-E  1-to-8 4K HDMI® Distribution Amplifier

|
Crestron Electronics, Inc.  15 Volvo Drive    Rockleigh, NJ 07647 All brand names, product names and trademarks are the property of their respective owners.
©2016 Crestron Electronics, Inc.
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1903
www.crestron.com Specifications subject to change without notice. Revised 05/13/16

You might also like