12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

(https://www.fasteners.eu/)

DIN 128 A - Split Spring Washers,

Curved, Form A
Equivalent norms: CSN 021731; UNI 8839;

https://www.fasteners.eu/standards/DIN/128-A/ 1/6
12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

Go Mobile at ₹199. SIGN UP

SEND INQUIRY (HTTPS://WWW.FASTENERS.EU/INQUIRY/ADD/)

Companies

Technical information

3D model

Inquiries

Overstock

https://www.fasteners.eu/standards/DIN/128-A/ 2/6
12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

Legend:
d1 - Inner diameter
d2 - Outer diameter
S - Washer width
h - unloaded washer height
r - radius
b - side length
c - width of opening

Makings:
Steel: steel
Stainless: A2, A4
Plastic: -
Non Ferrous: -
Thread: -

Notes:
-

https://www.fasteners.eu/standards/DIN/128-A/ 3/6
12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

Table according to DIN 128:

dimensions in mm

Nominal For d1 d1 b s h h r Weigh

size thread min. max. min. max. kg/100

2 M2 2,1 2,4 0,9 0,5 0,7 0,9 0,1 0,035

± ±
0,1 0,1

2,5 M2,5 2,6 2,9 1± 0,6 0,9 1,1 0,1 0,055

0,1 ±
0,1

3 M3 3,1 3,4 1,3 0,7 1,1 1,3 0,1 0,09

± ±
0,1 0,1

3,5 M3,5 3,6 3,9 1,3 0,7 1,1 1,3 0,1 0,1
± ±
0,1 0,1

4 M4 4,1 4,4 1,5 0,8 1,2 1,4 0,2 0,15

± ±
0,1 0,1

5 M5 5,1 5,4 1,8 1± 1,5 1,7 0,2 0,3

± 0,1
0,1

6 M6 6,1 6,5 2,5 1,3 2 2,2 0,3 0,7

± ±
0,15 0,1

7 M7 7,1 7,5 2,5 1,3 2 2,2 0,3 0,75

± ±
0,15 0,1

8 M8 8,1 8,5 3± 1,6 2,45 2,75 0,5 1,3

0,15 ±
0,1

10 M10 10,2 10,7 3,5 1,8 2,85 3,15 0,5 2,1

± ±
0,2 0,1

https://www.fasteners.eu/standards/DIN/128-A/ 4/6
12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

12 M12 12,2 12,7 4± 2,1 3,35 3,65 1 3,2

0,2 ±
0,15

14 M14 14,2 14,7 4,5 2,4 3,9 4,3 1 4,8

± ±
0,2 0,15

16 M16 16,2 17 5± 2,8 4,5 5,1 1 7

0,2 ±
0,15

18 M18 18,2 19 5± 2,8 4,5 5,1 1 7,8

0,2 ±
0,15

20 M20 20,2 21,2 6± 3,2 5,1 5,9 1 12,2

0,2 ±
0,2

22 M22 22,5 23,5 6± 3,2 5,1 5,9 1 13,3

0,2 ±
0,2

24 M24 24,5 25,5 7± 4± 6,5 7,5 1,6 21,5

0,25 0,2

27 M27 27,5 28,5 7± 4± 6,5 7,5 1,6 23,7

0,25 0,2

30 M30 30,5 31,7 8± 6± 9,5 10,5 1,6 42,5

0,25 0,2

36 M36 36,5 37,7 10 ± 6± 10,3 11,3 1,6 68

0,25 0,2

Note: All the information provided on this website is provided on an “as is” and “as commonly used in production” basis
and you agree that you use such information entirely at your own risk. This website gives no warranty and accepts no
responsibility or liability for the accuracy or the completeness of the information and materials contained in this
website. Under no circumstances will the website be held responsible or liable in any way for any claims, damages,
losses, expenses, costs or liabilities whatsoever (including, without limitation, any direct or indirect damages for loss of
pro ts, business interruption or loss of information) resulting or arising directly or indirectly from your use of or
inability to use this website.

https://www.fasteners.eu/standards/DIN/128-A/ 5/6
12/24/2019 DIN 128 A - Split Spring Washers, Curved, Form A

EU Fasteners Portal, s.r.o.

Novobranská 20
602 00 Brno
Czech republic
(+420) 608 889 223
IČ: 04264100

© 2014 Fasteners.eu, All rights reserved

(http://navrcholu.cz/Statistika/140913/)
By using this site you agree to the use of cookies for analytics, personalised content and ads. Learn more
Got it
(https://www.google.com/policies/technologies/cookies/)

https://www.fasteners.eu/standards/DIN/128-A/ 6/6