L'HOTELLIER
F9211
4, rue Henri Poincaré 92167 Antony Cedex France Tel No. 33 (1) 46.66.08.08 Fax No. : 33 (1) 46.66.23.24
ABBREVIATED COMPONENT MAINTENANCE MANUAL
PORTABLE EXTINGUISHER
P/N 863521-01 & 863521-02
LIST OF REVISIONS
REV. No. 0 1 2 3 4
REV. Date FEV 28/04 JAN 06/08 AUG 27/08 MAY 31/11 JUL 27/11
REV. No. 5 6
REV. Date NOV 27/13 DEC 17/13
LIST OF SERVICE BULLETINS
SERVICE DATE REV. SUBJECT
BULLETIN INSERTED
LIST OF EFFECTIVES PAGES
PAGE DATE PAGE DATE PAGE DATE
1 of 6 DEC 17/13 4 of 6 NOV 27/13
2 of 6 DEC 17/13 5 of 6 DEC 17/13
3 of 6 NOV 27/13 6 of 6 NOV 27/13
Page 1 of 6
26-20-10 DEC 17/13
L'HOTELLIER
ABBREVIATED COMPONENT MAINTENANCE MANUAL
863521-01 & 863521-02
TASK 26-20-10-870-801-A01
1. Description and Operation
A. General
This document describes the portable extinguisher P/N 863521-01 and 863521-02, and
gives information relative to the maintenance.
B. Characteristics
(1) General characteristics
- Charge : 1.2 Kg Halon 1211
- Pressurization : 11 bar to 20°C
- Safety setting : 22 to 25 bar to 70°C
- Maximum operating temperature: -40°C to +70°C (-40°F to +158°F)
- Discharge time : 10s to 20°C
- Range : 3.50 m
- Lifetime : 10 years
(2) Physical characteristics
- Overall dimensions (see figure 1)
- Weight
863521-01 863521-02
+0.030 +0.060
Weight w/o support 1.747 Kg /-0.010 1.807 Kg /-0.010
+0.066 +0.133
(3.851 lb. /-0.022) (3.984 lb. /-0.022)
+0.035 +0.065
Weight with support: 1.872 Kg /-0.015 1.977 Kg /-0.015
+0.077 +0.143
(3.851 lb. /-0.033) (4.359 lb. /-0.033)
C. Description (see figure 1)
The extinguisher is a new generation of handheld extinguisher designed to extinguish
cockpit and cabin fire.
The extinguisher, which is fitted on aircraft cockpit and cabin with a bracket, is compact,
lightweight, easy to use. It is a self-contained system with a pressure gauge, a safety
device and an aluminium cylinder. The extinguisher is filled with HALON 1211
Page 2 of 6
26-20-10 DEC 17/13
L'HOTELLIER
ABBREVIATED COMPONENT MAINTENANCE MANUAL
863521-01 & 863521-02
863521-01 863521-02
Nozzle dimension :
dia = 15,7 mm / length = 32 mm
Overall dimensions and description
Figure 1/GRAPHIC 26-20-10-991-801-A01
Page 3 of 6
26-20-10 NOV 27/13
L'HOTELLIER
ABBREVIATED COMPONENT MAINTENANCE MANUAL
863521-01 & 863521-02
TASK 26-20-10-700-801-A01
2. Testing and Fault Isolation
Subtask 26-20-10-940-001-A01
A. Job Set-up Information
(1) Tools, Fixtures and Equipment
REFERENCE QTY NAME
No specific 1 Scale, range 0 to 5 Kg
No specific 1 Electronic leak test bench
Subtask 26-20-10-750-001-A01
B. Tests
Not applicable
TASK 26-20-10-000-801-A01
3. Disassembly
Not applicable
TASK 26-20-10-110-801-A01
4. Cleaning
Subtask 26-20-10-940-002-A01
A. Job Set-up Information
(1) Tools, Fixtures and Equipment
REFERENCE QTY NAME
No specific 1 Brush with fine bristles
No specific AR Cloth - dry, clean, lint free
(2) Consumables
REFERENCE QTY NAME
No specific AR Alcohol, denatured
Page 4 of 6
26-20-10 NOV 27/13
L'HOTELLIER
ABBREVIATED COMPONENT MAINTENANCE MANUAL
863521-01 & 863521-02
Subtask 26-20-10-110-001-A01
B. Procedure
WARNING : DO NOT USE ALCOHOL NEAR FLAMES OR HEAT OR LET IT STAY ON
YOUR SKIN. ALSO, MAKE SURE YOU HAVE A GOOD FLOW OF CLEAN
AIR. THIS MATERIAL IS FLAMMABLE AND DANGEROUS TO YOUR
SKIN, EYES AND LUNGS.
(1) Use a brush soaked in denatured alcohol to remove unwanted materials (dust,
oils..)
WARNING: MAXIMUM ALLOWABLE AIR PRESSURE IS 30 PSI (207 kPa). DO NOT
DIRECT AIR STREAM TOWARD YOURSELF OR OTHER PERSONNEL.
USE PROTECTIVE EQUIPMENT TO GUARD EYES AND FACE WHEN
USING COMPRESSED AIR.
(2) Use a dry, clean and lint free cloth to the bottle, and dry with low pressure
compressed air.
TASK 26-20-10-210-801-A01
5. Check
- the unit presentation
- the conformity to the drawing file
- the finishing and anti-corrosion protection
- the manometer direction (the reading must be possible when the extinguisher is in
normal position (Discharge head to the high). The position of the pointer must be
in the GREEN area (6 – 18 bar).
- the absence of leak
- the weight:
- In reception, check the weight (see §1.B.2)
Time between weighing: every 12 months (from date of MFG)
For 863521-01
At each weighing, the extinguisher weight must be indicated on a label sticked on
the bottle and the difference between the initial weight indicated by the
manufacturer (“Total Weight”) and this value must be 50 g
For 863521-02
At each weighing, the extinguisher weight, w/o support shall be above the minimum
weight identified on the bottle (1.767 Kg mini)
Page 5 of 6
26-20-10 DEC 17/13
L'HOTELLIER
ABBREVIATED COMPONENT MAINTENANCE MANUAL
863521-01 & 863521-02
TASK 26-20-10-300-801-A01
6. Repair
Not applicable
If you have an extinguisher that is defective, send it to an approved repair workshop:
MANUFACTURER
L'HOTELLIER
4, rue Henri Poincaré
92167 Antony Cedex
FRANCE
Phone : 33 (1) 46.66.08.08
Fax : 33 (1) 46.66.23.24
Send the applicable data given below with each extinguisher:
A. Why you want to send it.
B. Result of tests.
C. Tail number of the aircraft.
TASK 26-20-10-400-801-A01
7. Assembly
Not applicable.
TASK 26-20-10-990-801-A01
8. Fits and Clearances
Not applicable.
TASK 26-20-10-940-801-A01
9. Special Tools, Fixtures and Equipment
Not applicable.
TASK 26-20-10-950-801-A01
10. Illustrated Parts List
Not applicable.
TASK 26-20-10-550-801-A01
11. Storage
- The extinguisher must be stored in a cardboard box with the appropriate dimensions
- Put an identification label on the container.
Page 6 of 6
26-20-10 NOV 27/13
