iranstd.webs.com iranstd@yahoo.

com

AWS
American Welding Society
‫اﺳﺘﺎﻧﺪارد اﻧﺠﻤﻦ ﺟﻮش آﻣﺮﯾﻜﺎ‬
AWS A1.1 : 2001
METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY

AWS A3.0 : 2001

STANDARD WELDING TERMS AND DEFINITIONS INCLUDING TERMS FOR ADHESIVE BONDING,
BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING

AWS A4.2M/A4.2 : 1997

STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE
DELTA FERRITE CONTENT OF AUSTENITIC AND DUPLEX FERRITIC-AUSTENITIC STAINLESS

AWS A4.3 : 1993

STANDARD METHODS FOR DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF
MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING

AWS A4.4M : 2001

STANDARD PROCEDURES FOR DETERMINATION OF MOISTURE CONTENT OF WELDING
FLUXES AND WELDING ELECTRODE FLUX COVERINGS

AWS A5.01 : 1993

FILLER METAL PROCUREMENT GUIDELINES R(1999)

AWS A5.1 : 1991

SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING

AWS A5.2 : 1992

SPECIFICATION FOR CARBON AND LOW ALLOY STEEL RODS FOR OXYFUEL GAS WELDING

AWS A5.3/A5.3M : 1999

SPECIFICATION FOR ALUMINUM AND ALUMINUM-ALLOY ELECTRODES FOR SHIELDED METAL
ARC WELDING

AWS A5.4 : 1992

SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING

AWS A5.5 : 1996

SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING

AWS A5.6 : 1984

SPECIFICATION FOR COVERED COPPER AND COPPER ALLOY ARC WELDING ELECTRODES

AWS A5.7 : 1984

SPECIFICATION FOR COPPER AND COPPER ALLOY BARE WELDING RODS AND ELECTRODES

AWS A5.8 : 1992

SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING

AWS A5.9 : 1993

SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS

iranstd.webs.com 1 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS A5.10/A5.10M : 1999

SPECIFICATION FOR BARE ALUMINUM AND ALUMINUM-ALLOY WELDING ELECTRODES AND

AWS A5.11/A5.11M : 1997

SPECIFICATION FOR NICKEL AND NICKEL-ALLOY WELDING ELECTRODES FOR SHIELDED
METAL ARC WELDING

AWS A5.12/A5.12M : 1998

SPECIFICATION FOR TUNGSTEN AND TUNGSTEN-ALLOY ELECTRODES FOR ARC WELDING AND

AWS A5.13 : 2000

SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING

AWS A5.14/A5.14M : 1997

SPECIFICATION FOR NICKEL AND NICKEL-ALLOY BARE WELDING ELECTRODES AND RODS

AWS A5.15 : 1990

SPECIFICATION FOR WELDING ELECTRODES AND RODS FOR CAST IRON

AWS A5.16 : 1990

SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY WELDING ELECTRODES AND RODS

AWS A5.17/A5.17M : 1997

SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC

AWS A5.18/A5.18M : 2001

SPECIFICATION FOR CARBON STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC

AWS A5.19 : 1992

SPECIFICATION FOR MAGNESIUM ALLOY WELDING ELECTRODES AND RODS R(1997)

AWS A5.21 : 2001

SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING R(1989)

AWS A5.22 : 1995

SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR FLUX CORED ARC WELDING AND
STAINLESS STEEL FLUX CORED RODS FOR GAS TUNGSTEN ARC WELDING

AWS A5.23/A5.23M : 1997

SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC

AWS A5.24 : 1990

SPECIFICATION FOR ZIRCONIUM AND ZIRCONIUM ALLOY WELDING ELECTRODES AND RODS

AWS A5.25/A5.25M : 1997

SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR
ELECTROSLAG WELDING R(2003)

AWS A5.26/A5.26M : 1997

SPECIFICATION FOR CARBON AND LOW-ALLOY STEEL ELECTRODES AND ELECTROGAS
WELDING R(2003)

AWS A5.28 : 1996

SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC

iranstd.webs.com 2 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS A5.29 : 1998

SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING

AWS A5.30 : 1997

SPECIFICATION FOR CONSUMABLE INSERTS

AWS A5.31 : 1992

SPECIFICATION FOR FLUXES FOR BRAZING AND BRAZE WELDING R(2003)

AWS A5.32 : 1997

SPECIFICATION FOR WELDING SHIELDING GASES

AWS A9.1 : 1992

STANDARD GUIDE FOR DESCRIBING ARC WELDS IN COMPUTERIZED MATERIAL PROPERTY
AND NONDESTRUCTIVE EXAMINATION DATABASES

AWS A9.2 : 1992

STANDARD GUIDE FOR RECORDING ARC WELD MATERIAL PROPERTY AND NONDESTRUCTIVE
EXAMINATION DATA IN COMPUTERIZED DATABASES

AWS B1.10 : 1999

GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS

AWS B1.11 : 2000

GUIDE FOR THE VISUAL EXAMINATION OF WELDS

AWS B2.1 : 2000

SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION

AWS B2.1.001 : 1990

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 3/4 INCH, IN THE AS-
WELDED CONDITION, WITH BACKING SITE LICENSE

AWS B2.1.002 : 1990

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF CARBON STEEL, (M-1/P-1, GROUP 1 OR 2), 3/16 THROUGH 7/8 INCH, IN THE AS-WELDED
CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-003 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING OF
GALVANIZED STEEL, (M-1), 18 THROUGH 10 GAUAGE, IN THE AS-WELDED CONDITION, WITH OR
WITHOUT BACKING SITE LICENSE

AWS B2.1-1-004 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING
(SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL, (M-1, GROUP 1), 18 THROUGH 10
GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-007 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING OF GALVANIZED STEEL,(M-1) 18 THROUGH 10 GAUGE, IN THE AS-WELDED
CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-008 : 2002

iranstd.webs.com 3 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC

WELDING OF CARBON STEEL (M-1, P-1 OR S-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED
CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-011 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC
WELDING OF GALVANIZED STEEL(M-1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED
CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-012 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL, (M-1,P-1, OR S-1 TO M-1, P-1 OR S-1), 10 THROUGH 18 GAUGE, IN
THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1-016 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E7018, AS-WELDED OR PWHT CONDITION SITE LICENSE

AWS B2.1-1-017 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E6010, AS-WELDED OR PWHT CONDITION SITE LICENSE

AWS B2.1-1-018 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SELF-SHIELDED FLUX CORED
ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E71T-8, AS-WELDED CONDITION SITE LICENSE

AWS B2.1-1-019 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR CO2 SHIELDED FLUX CORED
ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E70T-1 AND E71T-1, AS-WELDED CONDITION SITE LICENSE

AWS B2.1-1-020 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR 75% AR/25% CO2 SHIELDED
FLUX CORED ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-
1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED OR PWHT CONDITION SITE LICENSE

AWS B2.1-1-021 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR
2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2 AND E7018, AS-WELDED OR PWHT CONDITION SITE

AWS B2.1-1-022 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E6010 (VERTICAL UPHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION SITE

AWS B2.1-1-026 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018, AS-WELDED OR PWHT CONDITION SITE

AWS B2.1-1-027 : 1998

iranstd.webs.com 4 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SELF-SHIELDED FLUX CORED

ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1/2 INCH THICK,
E71T-11, AS-WELDED CONDITION SITE LICENSE

AWS B2.1-1/8-006 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING OF
CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1 TO M-8, P-8 OR S-8), 18 THROUGH 10
GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-1/8-010 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL (M-1, P-1, S-1 TO M-8, P-8, OR
S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING

AWS B2.1-1/8-014 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL, (M-1 TO M-8/P-8/S-8, GROUP
1), 10 THROUGH 18 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE

AWS B2.1-1/8-227 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL
(M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK, ER309(L), AS-WELDED CONDITION,
PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-1/8-228 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL
(M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E309(L)-15, -16, OR -17, AS-WELDED
CONDITION, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-1/8-229 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/ S-1,
GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/ P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2
INCH THICK, ER309(L) AND ER309(L)-15, -16, OR -17, AS-WELDED CONDITION, PRIMARILY PIPE

AWS B2.1-1/8-230 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING WITH CONSUMABLE INSERT ROOT OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 OR 2)
TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK,
IN309 AND ER309(L), AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-1/8-231 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING
OF CARBON STEEL (M-1/P-1/S-1,GROUPS 1 OR 2) TO AUSTENITIC STAINLESS STEEL (M-8/P-8/S-
8,GROUP 1),1/8 THROUGH 1-1/2 INCH THICK, IN309, ER309, AND E309-15, -16, OR -17,OR IN309,
ER309(L), AND ER309(L)-15, -16, OR -17, AS-WELDED CONDITION, PRIMARILY PIPE

AWS B2.1-1-201 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010
(VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION,
(PRIMARILY PIPE APPLICATIONS) SITE LICENSE

iranstd.webs.com 5 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS B2.1-1-202 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010
(VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED CONDITION
(PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-203 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010
(VERTICAL UPHILL), AS-WELDED CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-204 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 3/4 INCH THICK, E6010
(VERTICAL DOWNHILL ROOT WITH THE BALANCE VERTICAL UPHILL), AS-WELDED CONDITION
(PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-205 ERTA : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E6010 (VERTICAL UPHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT
CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE ERRATA

AWS B2.1-1-206 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E6010 (VERTICAL DOWNHILL) FOLLOWED BY E7018 (VERTICAL UPHILL), AS-WELDED OR PWHT
CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-207 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2, AS-
WELDED OR PWHT CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-208 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK,
E7018, AS-WELDED OR PWHT CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-209 : 1996

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR
2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-2 AND E7018, AS-WELDED OR PWHT CONDITION
(PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-1-210 : 2001

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
WITH CONSUMABLE INSERTS OF CARBON STEEL (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-
1/2 INCH THICK, INMS-1 AND ER70S-2, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE
APPLICATIONS SITE LICENSE

AWS B2.1-1-211 : 2001

iranstd.webs.com 6 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
WITH CONSUMABLE INSERT ROOT FOLLOWED BY SHIELDED METAL ARC WELDING OF
CARBON STEEL (M-1/P-1/S- 1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK INMS-1, ER70S-2,
AND E7018, AS-WELDED OR PWHT CONDITION, PRIMARILY PIPE APPLICATIONS

AWS B2.1-4-217 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), ER80S-B2, 1/8 THROUGH 1/2 IN.
THICK AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, PRIMARILY
PIPE APPLICATIONS SITE LICENSE

AWS B2.1-4-218 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), E8018-B2, 1/8
THROUGH 1/2 IN. THICK AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT
CONDITION, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-4-219 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4,
GROUP 1 OR 2), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN.
THICK, PWHT CONDITION, ER80S-B2 AND E8018-B2, PRIMARILY PIPE APPLICATIONS SITE

AWS B2.1-4-220 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
(CONSUMABLE INSERT ROOT) OF CHROMIUM-MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2),
E8018-B2, 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK,
PWHT CONDITION IN515 AND ER80S-B2, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-4-221 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
(CONSUMABLE INSERT ROOT) FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-
MOLYBDENUM STEEL (M-4/P-4, GROUP 1 OR 2), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED
CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION IN515, ER80S-B2, AND E8018-B2,
PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-5A-222 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), ER90S-B3, 1/8 THROUGH 1/2 IN. THICK, AS-
WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, PRIMARILY PIPE
APPLICATIONS SITE LICENSE

AWS B2.1-5A-223 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), ER9018-B3, 1/8 THROUGH 1/2 IN.
THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT CONDITION, PRIMARILY
PIPE APPLICATIONS SITE LICENSE

AWS B2.1-5A-224 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-
5A), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 1-1/2 IN. THICK, PWHT
CONDITION, ER90S-B3 AND E9018-B3, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-5A-225 : 1999

iranstd.webs.com 7 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
(CONSUMABLE INSERT ROOT) OF CHROMIUM-MOLYBDENUM STEEL (M-5A/P-5A), 1/8 THROUGH
1/2 IN. THICK, AS-WELDED CONDITION, 1/8 THROUGH 3/4 IN. THICK, PWHT CONDITION, IN521
AND ER90S-B3, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-5A-226 : 1999

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
(CONSUMABLE INSERT ROOT) FOLLOWED BY SHIELDED METAL ARC WELDING OF CHROMIUM-
MOLYBDENUM STEEL (M-5A/P-5A), 1/8 THROUGH 1/2 IN. THICK, AS-WELDED CONDITION, 1/8
THROUGH 1-1/2 IN. THICK, PWHT CONDITION, IN521, ER90S-B3, AND E9018-B3, PRIMARILY PIPE
APPLICATIONS SITE LICENSE

AWS B2.1-8-005 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING OF
AUSTENITIC STAINLESS STEEL (M-8 OR P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-
WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-8-009 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS TUNGSTEN ARC
WELDING OF AUSTENITIC STAINLESS STEEL (M-8,P-8,OR S-8), 18 THROUGH 10 GAUGE, IN THE
AS-WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-8-013 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SHIELDED METAL ARC
WELDING OF AUSTENITIC STAINLESS STEEL, (SWPS) 10 THROUGH 18 GAUGE, IN THE AS-
WELDED CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.1-8-023 : 1994

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
THICK, AS-WELDED CONDITION SITE LICENSE

AWS B2.1-8-024 : 2001

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK,
ER3XX, AS-WELDED CONDITION PRIMARILY PLATE AND STRUCTURAL APPLICATIONS SITE

AWS B2.1-8-025 : 2001

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-
8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, E3XX-XX, AS-WELDED CONDITION, PRIMARILY
PLATE AND STRUCTURAL CONDITIONS SITE LICENSE

AWS B2.1-8-212 : 2001

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/16 THROUGH 1-1/2 INCH THICK,
ER3XX, AS-WELDED CONDITION, PRIMARILY PIPE APPLICATIONS SITE LICENSE

AWS B2.1-8-213 : 1997

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR SHIELDED METAL ARC
WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH
THICK, ER3XX-XX, AS-WELDED CONDITION (PRIMARILY PIPE APPLICATIONS) SITE LICENSE

AWS B2.1-8-214 : 2001

iranstd.webs.com 8 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-
8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, ER3XX, E3XX-XX AS-WELDED CONDITION,
PRIMARILY PIPE APPLICATIONS STATE LICENSE

AWS B2.1-8-215 : 1998

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
WITH CONSUMABLE INSERT OF AUSTENITIC STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8
THROUGH 1-1/2 INCH THICK, IN3XX AND ER3XX, AS-WELDED CONDITION (PRIMARILY PIPE

AWS B2.1-8-216 : 2001

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
WITH CONSUMABLE INSERT FOLLOWED BY SHIELDED METAL ARC WELDING OF AUSTENITIC
STAINLESS STEEL (M-8/P-8/S-8, GROUP 1), 1/8 THROUGH 1-1/2 INCH THICK, IN3XX, ER3XXX, AND
E3XX-XX, AS-WELDED CONDITION PRIMARILY PIPE APPLICATIONS

AWS B2.1-22-015 : 2002

STANDARD WELDING PROCEDURE SPECIFICATION (WPS) FOR GAS TUNGSTEN ARC WELDING
OF ALUMINUM, (M/P/S-22 TO M/P/S-22), 18 THROUGH 10 GAUGE, IN THE AS-WELDED
CONDITION, WITH OR WITHOUT BACKING SITE LICENSE

AWS B2.2 : 1991

STANDARD FOR BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION

AWS B4.0 : 1998

STANDARD METHODS FOR MECHANICAL TESTING OF WELDS

AWS B4.0M : 2000

STANDARD METHODS FOR MECHANICAL TESTING OF WELDS

AWS B5.2 : 2001

SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTOR SPECIALISTS AND
WELDING INSPECTOR ASSISTANTS

AWS B5.5 : 2000

SPECIFICATION FOR THE QUALIFICATION OF WELDING EDUCATORS

AWS B5.9 : 2000

SPECIFICATION FOR THE QUALIFICATION OF WELDING SUPERVISORS

AWS B5.14 : 2002

SPECIFICATION FOR THE QUALIFICATION OF WELDING SALES REPRESENTATIVES

AWS B5.15 : 2003

SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS

AWS B5.16 : 2001

SPECIFICATION FOR THE QUALIFICATION OF WELDING ENGINEERS

AWS B5.17 : 2000

SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS

AWS C1.1M/C1.1 : 2000

RECOMMENDED PRACTICES FOR RESISTANCE WELDING

iranstd.webs.com 9 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS C1.2 : 1953

RECOMMENDED PRACTICES FOR SPOT WELDING ALUMINIUM AND ALUMINIUM ALLOYS

AWS C1.3 : 1970

RECOMMENDED PRACTICES FOR RESISTANCE WELDING COATED LOW CARBON STEELS

AWS C1.4M/C1.4 : 1999

SPECIFICATION FOR RESISTANCE WELDING OF CARBON AND LOW-ALLOY STEELS

AWS C2.2 : 1967

RECOMMENDED PRACTICES FOR METALLIZING WITH ALUMINIUM AND ZINC FOR PROTECTION
OF IRON AND STEEL

AWS C2.14 : 1974

CORROSION TESTS OF FLAME-SPRAYED COATED STEEL 19-YEAR REPORT

AWS C2.16/C2.16M : 2002

GUIDE FOR THERMAL-SPRAY OPERATOR QUALIFICATION

AWS C2.20/C2.20M : 2002

SPECIFICATIOPN FOR THERMAL SPRAYING ZINC ANODES ON STEEL REINFORCED CONCRETE

AWS C2.23M/C2.23 : 2003

SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF
ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION
OF STEEL NACE 12, SSPC-CS 23.00

AWS C2.25/C2.25M : 2002

SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK SOLID AND COMPOSITE WIRE AND

AWS C3.2M/C3.2 : 2001

STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS ERRATA 2001

AWS C3.3 : 2002

RECOMMENDED PRACTICES FOR DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL
BRAZED COMPONENTS

AWS C3.4 : 1999

SPECIFICATION FOR TORCH BRAZING

AWS C3.5 : 1999

SPECIFICATION FOR INDUCTION BRAZING

AWS C3.6 : 1999

SPECIFICATION FOR FURNACE BRAZING

AWS C3.7 : 1999

SPECIFICATION FOR ALUMINUM BRAZING

AWS C3.8 : 1990

RECOMMENDED PRACTICES FOR ULTRASONIC INSPECTION OF BRAZED JOINTS R(1998)

AWS C4.1 : 1977

CRITERIA FOR DESCRIBING OXYGEN-CUT SURFACES

iranstd.webs.com 10 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS C4.3 : 1983

OPERATORS MANUAL FOR OXYFUEL GAS HEATING TORCH OPERATION

AWS C4.5M : 2000

UNIFORM DESIGNATION SYSTEM FOR OXYFUEL NOZZLES ERRATA:2000

AWS C5.1 : 1973

RECOMMENDED PRACTICES FOR PLASMA-ARC WELDING

AWS C5.2 : 2001

RECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGING

AWS C5.3 : 2000

RECOMMENDED PRACTICES FOR AIR CARBON ARC GOUGING AND CUTTING

AWS C5.4 : 1993

RECOMMENDED PRACTICES FOR STUD WELDING

AWS C5.5 : 1980

RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING R(1994)

AWS C5.6 : 1989

RECOMMENDED PRACTICES FOR GAS METAL ARC WELDING

AWS C5.7 : 2000

RECOMMENDED PRACTICES FOR ELECTROGAS WELDING

AWS C5.10 : 1994

RECOMMENDED PRACTICES FOR SHIELDING GASES FOR WELDING AND PLASMA ARC

AWS C6.1 : 1989

RECOMMENDED PRACTICES FOR FRICTION WELDING R(1998)

AWS C7.1 : 1999

RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING

AWS C7.2 : 1998

RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND DRILLING

AWS C7.3 : 1999

PROCESS SPECIFICATION FOR ELECTRON BEAM WELDING

AWS D1.0 : 1966

WELDING IN BUILDING CONSTRUCTION EIGHTH EDITION; SUPPLEMENT 2: SEPTEMBER 1968

AWS D1.1/D1.1M : 2002

STRUCTURAL WELDING CODE - STEEL ERRATA 07/15/2002 INCORPORATED

AWS D1.1-BI : 2000

THE OFFICIAL BOOK OF D1.1 INTERPRETATIONS - A COLLECTION OF RESPONSES TO FORMAL
INQUIRIES ABOUT THE REQUIREMENTS OF AWS D1.1 (1976-1998)

AWS D1.2/D1.2M : 2003

STRUCTURAL WELDING CODE ALUMINUM FOURTH EDITION

iranstd.webs.com 11 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS D1.3 : 1998

STRUCTURAL WELDING CODE - SHEET STEEL ERRATA

AWS D1.4 : 1998

STRUCTURAL WELDING CODE - REINFORCING STEEL ERRATA

AWS D1.5-M : 1996

BRIDGE WELDING CODE AASHTO BWC-3

AWS D1.5M/D1.5 : 2002

BRIDGE WELDING CODE AASHTO BWC-4

AWS D1.6 : 1999

STRUCTURAL WELDING CODE - STAINLESS STEEL

AWS D3.5 : 1993

GUIDE FOR STEEL HULL WELDING R(2000)

AWS D3.6M : 1999

SPECIFICATION FOR UNDERWATER WELDING

2AWS D3.7 : 1990

GUIDE FOR ALUMINUM HULL WELDING

AWS D8.7 : 1988

RECOMMENDED PRACTICES FOR AUTOMOTIVE WELD QUALITY-RESISTANCE SPOT WELDING
(SAE J 1188)

AWS D8.8 : 1997

SPECIFICATION FOR AUTOMOTIVE AND LIGHT TRUCK COMPONENTS WELD QUALITY - ARC
WELDING SAE HS J1196

AWS D8.9M : 2002

RECOMMENDED PRACTICES FOR TEST METHODS FOR EVALUATING THE RESISTANCE SPOT
WELDING BEHAVIOR OF AUTOMOTIVE SHEET STEEL MATERIALS SAE D8.9M-2002

AWS D8.14M/D8.14 : 2000

SPECIFICATION FOR AUTOMOTIVE AND LIGHT TRUCK COMPONENTS WELD QUALITY -
ALUMINUM ARC WELDING

AWS D9.1M/D9.1 : 2000

SHEET METAL WELDING CODE

AWS D10.4 : 1986

RECOMMENDED PRACTICES FOR WELDING AUSTENITIC CHROMIUM-NICKEL STAINLESS STEEL
PIPING AND TUBING R(2000)

AWS D10.6/D10.6M : 2000

RECOMMENDED PRACTICES FOR GAS TUNGSTEN ARC WELDING OF TITANIUM PIPE AND

AWS D10.7M/D10.7 : 2000

GUIDE FOR THE GAS SHIELDED ARC WELDING OF ALUMINUM AND ALUMINUM ALLOY PIPE

AWS D10.8 : 1996

RECOMMENDED PRACTICES FOR WELDING OF CHROMIUM-MOLYBDENUM STEEL PIPING AND

iranstd.webs.com 12 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS D10.10/D.10M : 1999

RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING

AWS D10.11 : 1987

RECOMMENDED PRACTICES FOR ROOT PASS WELDING OF PIPE WITHOUT BACKING

AWS D10.12M/D10.12 : 2000

GUIDE FOR WELDING MILD STEEL PIPE

AWS D10.13 : 1995

RECOMMENDED PRACTICES FOR THE BRAZING OF COPPER PIPE AND TUBING FOR MEDICAL
GAS SYSTEMS

AWS D10.13/D10.13M : 2001

RECOMMENDED PRACTICES FOR THE BRAZING OF COPPER TUBING AND FITTINGS FOR
MEDICAL GAS SYSTEMS

AWS D11.2 : 1989

GUIDE FOR WELDING IRON CASTINGS

AWS D14.1 : 1997

SPECIFICATION FOR WELDING OF INDUSTRIAL AND MILL CRANES AND OTHER MATERIAL
HANDLING EQUIPMENT

AWS D14.2 : 1993

SPECIFICATION FOR METAL CUTTING MACHINE TOOL WELDMENTS

AWS D14.3/D14.3M : 2000

SPECIFICATION FOR WELDING EARTHMOVING AND CONSTRUCTION EQUIPMENT

AWS D14.4 : 1997

SPECIFICATION FOR WELDED JOINTS IN MACHINERY AND EQUIPMENT

AWS D14.5 : 1997

SPECIFICATION FOR WELDING OF PRESSES AND PRESS COMPONENTS

AWS D14.6 : 1996

SPECIFICATION FOR WELDING OF ROTATING ELEMENTS OF EQUIPMENT

AWS D15.1 : 2001

RAILROAD WELDING SPECIFICATION - CARS AND LOCOMOTIVES

AWS D15.2 : 1994

RECOMMENDED PRACTICES FOR THE WELDING OF RAILS AND RELATED RAIL COMPONENTS
FOR USE BY RAIL VEHICLES

AWS D16.2 : 1994

STANDARD FOR COMPONENTS OF ROBOTIC AND AUTOMATIC WELDING INSTALLATIONS

AWS D16.2/D16.2M : 2001

GUIDE FOR COMPONENTS OF ROBOTIC AND AUTOMATIC ARC WELDING INSTALLATIONS

AWS D16.3M/D16.3 : 2001

RISK ASSESSMENT GUIDE FOR ROBOTIC ARC WELDING

iranstd.webs.com 13 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS D16.4 : 1999

SPECIFICATION FOR THE QUALIFICATION OF ROBOTIC ARC WELDING PERSONNEL

AWS D17.1 : 2001

SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS INCORPORATING

AWS D18.1 : 1999

SPECIFICATION FOR WELDING OF AUSTENITIC STAINLESS STEEL TUBE AND PIPE SYSTEMS IN
SANITARY (HYGIENIC) APPLICATIONS

AWS D18.2 : 1999

GUIDE TO WELD DISCOLORATION LEVELS ON INSIDE OF AUSTENITIC STAINLESS STEEL TUBE

AWS F1.1 : 1999

METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED
PROCESSES

AWS F1.2 : 1999

LABORATORY METHOD FOR MEASURING FUME GENERATION RATES AND TOTAL FUME
EMISSION OF WELDING AND ALLIED PROCESSES

AWS F1.3 : 1999

SAMPLING STRATEGY GUIDE FOR EVALUATING CONTAMINANTS IN THE WELDING

AWS F1.4 : 1997

METHODS FOR ANALYSIS OF AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED
PROCESSES

AWS F1.5M : 2003

METHODS FOR SAMPLING AND ANALYZING GASES FROM WELDING AND ALLIED PROCESSES

AWS F1.6 : 2003

GUIDE FOR ESTIMATING WELDING EMISSIONS FOR EPA AND VENTILATION PERMIT

AWS F2.1 : 1978

RECOMMENDED SAFE PRACTICE FOR ELECTRON BEAM WELDING AND CUTTING

AWS F2.2 : 2001

LENS SHADE SELECTOR

AWS F2.3M : 2001

SPECIFICATION FOR USE AND PERFORMANCE OF TRANSPARENT WELDING CURTAINS AND

AWS F3.1 : 1989

GUIDE FOR WELDING FUME CONTROL

AWS F3.2M/F3.2 : 2001

VENTILATION GUIDE FOR WELD FUME

AWS F4.1 : 1999

RECOMMENDED SAFE PRACTICES FOR THE PREPARATION FOR WELDING AND CUTTING OF
CONTAINERS AND PIPING

AWS F6.1 : 1978

iranstd.webs.com 14 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

METHOD FOR SOUND LEVEL MEASUREMENT OF MANUAL ARC WELDING AND CUTTING
PROCESSES R(1989)

AWS G1.2M/G1.2 : 1999

SPECIFICATION FOR STANDARDIZED ULTRASONIC WELDING TEST SPECIMEN FOR

AWS G1.10M : 2001

GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATED TOOL BUTT
THERMOPLASTIC WELDS

AWS G2.1M/G2.1 : 2002

GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS REPRINTED, INCORPORATES
ERRATA: OCTOBER 2003

AWS Z49.1 : 1999

SAFETY IN WELDING, CUTTING AND ALLIED PROCESSES

AWS ANSI/ C2.18 : 1993

GUIDE FOR THE PROTECTION OF STEEL WITH THERMAL SPRAYED COATINGS OF ALUMINUM
AND ZINC AND THEIR ALLOYS AND COMPOSITES

AWS ANSI A5.20 : 1995

SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING

AWS ANSI AASHTO D 1.5 : 1995

BRIDGE WELDING CODE

AWS API-M : 2001

CODE CLINIC FOR STUDY OF API STANDARD 1104 NINETEENTH EDITION WELDING OF
PIPELINES AND RELATED FACILITIES - REFERENCE MANUAL

AWS API-IM : 1999

CODE CLINIC FOR STUDY OF API STANDARD 1104 EIGHTEENTH EDITION WELDING OF
PIPELINES AND RELATED FACILITIES - INSTRUCTION MANUAL

AWS ARE-5 : 2001

DESIGN FOR WELDING

AWS ARE-6 : 2001

TEST METHODS FOR EVALUATING WELDED JOINTS

AWS ARE-7 : 2001

RESIDUAL STRESS AND DISTORTION

AWS ARE-12 : 2001

ECONOMICS OF WELDING AND CUTTING

AWS AWN : 1979

ARC WELDING AND CUTTING NOISE

AWS BRH : 1991

BRAZING HANDBOOK 1991 FOURTH EDITION

AWS BRH APP A : 1991

DEFINITIONS OF TERMS FOURTH EDITIOIN(BRAZING HANDBOOK)

iranstd.webs.com 15 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS BRH APP B : 1991

PROPERTIES OF BRAZEABLE METALS AND ALLOYS FOURTH EDITION

AWS BRH APP C : 1991

THERMAL EXPANSION DATA FOURTH EDITION

AWS BRH CH 1 : 1991

FUNDAMENTALS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 2 : 1991

BRAZEMENT DESIGN AND DRAFTING ROOM PRACTICE FOURTH EDITION(BRAZING HANDBOOK)

2AWS BRH CH 3 : 1991

BRAZING FILLER METALS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 4 : 1991

FLUXES AND ATMOSPHERES FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 5 : 1991

CORROSION RESISTANCE OF BRAZED JOINTS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 6 : 1991

SAFETY AND HEALTH FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 7 : 1991

PRECLEANING AND SURFACE PREPARATION FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 8 : 1991

ASSEMBLY AND FIXTURING FOURTH EDITIION(BRAZING HANDBOOK)

AWS BRH CH 9 : 1991

TORCH BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 10 : 1991

FURNACE BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 11 : 1991

INDUCTION BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 12 : 1991

DIP BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 13 : 1991

RESISTANCE BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 14 : 1991

BRAZE WELDING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 15 : 1991

OTHER PROCESSES FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 16 : 1991

INSPECTION OF BRAZED JOINTS FOURTH EDITION(BRAZING HANDBOOK)

iranstd.webs.com 16 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS BRH CH 17 : 1991

CODES AND OTHER STANDARDS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 18 : 1991

COPPER AND COPPER ALLOYS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 19 : 1000

PRECIOUS METALS(BRAZING HANDBOOK)

AWS BRH CH 20 : 1991

LOW CARBON, LOW ALLOY, AND TOOL STEELS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 21 : 1991

BRAZING OF CAST IRON FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 22 : 1991

PIPE AND TUBE FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 23 : 1991

NICKEL BASE AND COBALT-CONTAINING ALLOYS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 24 : 1991

STAINLESS STEELS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 25 : 1991

ALUMINUM AND ALUMINUM ALLOYS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 26 : 1991

MAGNESIUM AND MAGNESIUM ALLOYS FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 27 : 1991

TITANIUM, ZIRCONIUM, AND BERYLLIUM FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 28 : 1991

REFRACTORY METALS - NIOBIUM, MOLYBDENUM, TANTALUM, AND TUNGSTEN FOURTH
EDITION(BRAZING HANDBOOK)

AWS BRH CH 29 : 1991

ELECTRON TUBE AND VACUUM EQUIPMENT BRAZING FOURTH EDITION(BRAZING HANDBOOK)

AWS BRH CH 30 : 1991

CARBIDE TOOLS FOURTH EDITION

AWS BRH CH 31 : 1991

CERAMIC BRAZING FOURTH EDITION

AWS BRH CH 32 : 1991

CARBON AND GRAPHITE FOURTH EDITION

AWS BRH CH 33 : 1991

HONEYCOMB STRUCTURE BRAZING FOURTH EDITION

AWS BRH INDEX : 1991

INDEX FOURTH EDITION(BRAZING HANDBOOK)

iranstd.webs.com 17 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS BRH INTRO : 1000

BRAZING HANDBOOK 1991 FOURTH EDITION

AWS CAWF : 1983

CHARACTERIZATION OF ARC WELDING FUME

AWS CC-IM : 1998

CODE CLINIC FOR STUDY OF AWS D1.1 STRUCTURAL WELDING CODE - STEEL

AWS CC-RM : 2002

CODE CLINIC FOR STUDY OF AWS D1.1 STRUCTURAL WELDING CODE-STEEL - REFERENCE

AWS CM : 2000
CERTIFICATION MANUAL FOR WELDING INSPECTORS FOURTH EDITION

AWS CM ANNEX A : 2000

ADDITIONAL RESOURCES

AWS CM ANNEX B : 2000

SAMPLE FORMS

AWS CM ANNEX C : 2000

ANSWER KEY REVIEW QUESTIONS CHAPTERS 1 - 13

AWS CM CH 1 : 2000
WELDING INSPECTOR

AWS CM CH 2 : 2000
WELDING INSPECTOR RESPONSIBILITIES

AWS CM CH 3 : 2000
SAFETY

AWS CM CH 4 : 2000
STANDARDS, INCLUDING CODES AND SPECIFICATIONS

AWS CM CH 5 : 2000
WELD GEOMETRY AND WELDING TERMINOLOGY

AWS CM CH 6 : 2000
WELDING AND NONDESTRUCTIVE EXAMINATION SYMBOLS

AWS CM CH 7 : 2000
WELDABILITY, WELDING METALLURGY, AND WELDING CHEMISTRY

AWS CM CH 8 : 2000
DESTRUCTIVE TESTING

AWS CM CH 9 : 2000
WELDING, PROCEDURE AND WELDER QUALIFICATION

AWS CM CH 10 : 2000
WELDING, BRAZING, AND CUTTING PROCESSES

AWS CM CH 11 : 2000

iranstd.webs.com 18 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

WELD AND BASE METAL DISCONTINUITIES

AWS CM CH 12 : 2000
NONDESTRUCTIVE EXAMINATION (NDE) PROCESSES

AWS CM CH 13 : 2000
INSPECTION REPORTS

AWS CM INTRO : 2000

CONTENTS; 2000

AWS DPW : 1999

DESIGN AND PLANNING MANUAL FOR COST-EFFECTIVE WELDING

AWS EG2.0 : 1995

GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL ENTRY LEVEL

AWS EG3.0 : 1996

GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL LEVEL II -
ADVANCED WELDER

AWS EG4.0 : 1996

GUIDE FOR THE TRAINING AND QUALIFICATION OF WELDING PERSONNEL LEVEL III - EXPERT

AWS EWH-1 : 1979

EFFECTS OF WELDING ON HEALTH I

AWS EWH-2 : 1981

EFFECTS OF WELDING ON HEALTH II

AWS EWH-3 : 1983

EFFECTS OF WELDING ON HEALTH III

AWS EWH-4 : 1983

EFFECTS OF WELDING ON HEALTH IV

AWS EWH-5 : 1987

EFFECTS OF WELDING ON HEALTH V

AWS EWH-6 : 1989

EFFECTS OF WELDING ON HEALTH VI

AWS EWH-7 : 1990

EFFECTS OF WELDING ON HEALTH VII

AWS EWH-8 : 1994

EFFECTS OF WELDING ON HEALTH VIII

AWS EWH-9 : 1995

EFFECTS OF WELDING ON HEALTH IX

AWS EWH-10 : 1998

EFFECTS OF WELDING ON HEALTH X

AWS EWH-11 : 2001

iranstd.webs.com 19 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

EFFECTS OF WELDING ON HEALTH, XI

AWS FACT SHEET NO. 1 : 1995

FUMES AND GASES

AWS FACT SHEET NO. 2 : 2003

RADIATION

AWS FACT SHEET NO. 2 : 1997

RADIATION

AWS FACT SHEET NO. 3 : 2003

NOISE

AWS FACT SHEET NO. 3 : 1995

NOISE

AWS FACT SHEET NO. 4 : 2003

CHROMIUM AND NICKEL IN WELDING FUME

AWS FACT SHEET NO. 4 : 1995

CHROMIUM AND NICKEL IN WELDING FUME

AWS FACT SHEET NO. 5 : 1997

ELECTRICAL HAZARDS

AWS FACT SHEET NO. 6 : 1995

FIRE AND EXPLOSION PREVENTION

AWS FACT SHEET NO. 7 : 1995

BURN PROTECTION

AWS FACT SHEET NO. 8 : 1995

MECHANICAL HAZARDS

AWS FACT SHEET NO. 9 : 1995

TRIPPING AND FALLING

AWS FACT SHEET NO. 10 : 1995

FALLING OBJECTS

AWS FACT SHEET NO. 11 : 1995

CONFINED SPACES

AWS FACT SHEET NO. 12 : 1995

CONTACT LENS WEAR

AWS FACT SHEET NO. 13 : 1995

ERGONOMICS IN THE WELDING ENVIRONMENT

AWS FACT SHEET NO. 14 : 1995

GRAPHIC SYMBOLS FOR PRECAUTIONARY LABELS

AWS FACT SHEET NO. 15 : 1995

STYLE GUIDELINES FOR SAFETY AND HEALTH DOCUMENTS

iranstd.webs.com 20 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS FACT SHEET NO. 16 : 1997

PACEMAKERS AND WELDING

AWS FACT SHEET NO. 17 : 1996

ELECTRIC AND MAGNETIC FIELDS (EMF)

AWS FACT SHEET NO. 18 : 1997

LOCKOUT/TAGOUT

AWS FACT SHEET NO. 19 : 1998

LASER WELDING AND CUTTING SAFETY

AWS FACT SHEET NO. 20 : 1997

THERMAL SPRAYING SAFETY

AWS FACT SHEET NO. 22 : 2002

CADMIUM EXPOSURE FROM WELDING AND ALLIED PROCESSSES

AWS FACT SHEET NO. 23 : 2001

CALIFORNIA PROPOSITION 65

AWS FACT SHEET NO. 24 : 2002

FLUXES FOR ARC WELDING AND BRAZING: SAFE HANDLING AND USE

AWS FACT SHEET NO. 25 : 2002

METAL FUME FEVER

AWS FACT SHEET NO. 27 : 2003

THORIATED TUNGSTEN ELECTRODES

AWS FGW : 1000

CONTENTS(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW APP A : 1979

TABLE A1 ELECTRODES USED IN PART III(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW APP B : 1979

TABLES B1 TO B43 (TUBULAR DATA ON FUME GENERATION CHARACTERISTICS OF
ELECTRODES USED IN PART II)(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW APP C : 1979

TABLES C1 TO C4 SUMMARY OF ORIGINAL DATA, PART III(FUMES AND GASES IN THE WELDING
ENVIRONMENT)

AWS FGW APP D : 1979

TABLES D1 AND D2 LABORATORY DATA SHEETS FOR PART IV(FUMES AND GASES IN THE
WELDING ENVIRONMENT)

AWS FGW APP E : 1979

TABLES E1 TO E6 LABORATORY DATA SHEETS FOR PART V(FUMES AND GASES IN THE
WELDING ENVIRONMENT)

AWS FGW PT 1 : 1979

VENTILATION STUDIES(FUMES AND GASES IN THE WELDING ENVIRONMENT)

iranstd.webs.com 21 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS FGW PT 2 : 1979

ARC WELDING FUMES AND GASES(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW PT 3 : 1979

BRAZING FUMES AND GASES(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW PT 4 : 1979

THERMAL SPRAYING FUMES AND GASES(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FGW PT 5 : 1979

FUMES AND GASES FROM OXYGEN CUTTING(FUMES AND GASES IN THE WELDING

AWS FMC : 2000

FILLER METAL COMPARISON CHARTS

AWS FUMES AND GASES : 1979

CONTENTS(FUMES AND GASES IN THE WELDING ENVIRONMENT)

AWS FWSH : 1997

DESIGN HANDBOOK FOR CALCULATING FILLET WELD SIZES

AWS GWF : 1998

GUIDE FOR THE DESIGN OF A WELDER TRAINING FACILITY

AWS HOT : 1987

HANDS-ON TRAINING USE OF MEASURING TOOLS FOR THE AWS CERTIFIED WELDING
INSPECTOR HANDS-ON EXAMINATION

AWS IFS-02 : 2002

INTERNATIONAL INDEX OF WELDING FILLER METAL CLASSIFICATIONS

AWS IQCC : 1000

WELDING INSPECTION & QUALITY CONTROL COURSE 36; LESSON NUMBER AND TITLE; 1-14

AWS JWE : 1997

JEFFERSON'S WELDING ENCYCLOPEDIA EIGHTEENTH EDITION

AWS LVOS : 1983

LABORATORY VALIDATION OF OZONE SAMPLING WITH SPILL-PROOF IMPINGERS

AWS OPP : 1980

UNDERWATER WELDING OF OFFSHORE PLATFORMS AND PIPELINES

AWS PRG : 1995

THE PRACTICAL REFERENCE GUIDE FOR RADIOGRAPHIC INSPECTION - ACCEPTANCE

AWS PRGC : 1999

THE PRACTICAL REFERENCE GUIDE FOR CORROSION OF WELDS - CAUSES AND CURES

4AWS PRGHF : 2002

THE PRACTICAL REFERENCE GUIDE FOR HARDFACING

AWS PRGQA : 2001

THE PRACTICAL REFERENCE GUIDE FOR WELDING ALUMINUM HIGH-QUALITY FUSION

iranstd.webs.com 22 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS PRGT : 1999

THE PRACTICAL REFERENCE GUIDE FOR WELDING TITANIUM

AWS PRGVT : 1999

THE PRACTICAL REFERENCE GUIDE FOR WELDING INSPECTION MANAGEMENT - VISUAL
INSPECTION OF PRESSURE VESSELS AND PRESSURE PIPING

AWS PRGWA : 2002

THE PRACTICAL REFERENCE GUIDE FOR WELDING ALUMINUM COMMERCIAL APPLICATIONS

AWS PRGWM : 1999

THE PRACTICAL REFERENCE GUIDE TO WELDING METALLURGY - KEY CONCEPTS FOR

AWS PWE : 2000

THE PRACTICAL WELDING ENGINEER

AWS QC1 : 1996

STANDARD FOR AWS CERTIFICATION OF WELDING INSPECTORS

AWS QC2 : 1993

RECOMMENDED PRACTICE FOR THE TRAINING, QUALIFICATION AND CERTIFICATION OF
WELDING INSPECTOR SPECIALIST AND WELDING INSPECTOR ASSISTANT

AWS QC4 : 1989

STANDARD FOR ACCREDITATION OF TEST FACILITIES FOR AWS CERTIFIED WELDER

AWS QC5 : 1991

STANDARD FOR CERTIFICATION OF WELDING EDUCATORS

AWS QC5G : 1992

GUIDE TO AWS WELDING EDUCATOR QUALIFICATION AND CERTIFICATION

AWS QC7 : 1993

STANDARD FOR AWS CERTIFIED WELDERS

AWS QC7 SUP C : 1993

SUPPLEMENT C—WELDER PERFORMANCE QUALIFICATION SHEET METAL TEST

AWS QC7 SUP F : 1993

SUPPLEMENT F—CHEMICAL PLANT AND PETROLEUM REFINERY PIPING

AWS QC7 SUP G : 1993

SUPPLEMENT G—AWS PERFORMANCE QUALIFICATION TEST

AWS QC10 : 1995

SPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR ENTRY LEVEL WELDERS

AWS QC11 : 1996

SPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL II - ADVANCED WELDERS

AWS QC17 : 2002

STANDARD FOR ACCREDITATION OF WELDING FABRICATORS FOR AWS CERTIFIED WELDING
FABRICATOR PROGRAM

iranstd.webs.com 23 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS QC19 : 2002

STANDARD FOR THE AWS CERTIFICATION OF ARC WELDING PERSONNEL

AWS QCM12 : 1996

SPECIFICATION FOR QUALIFICATION AND CERTIFICATION FOR LEVEL III - EXPERT WELDERS

AWS SGSH : 2003

THE INDEPENDENT SHOP S GUIDE TO WELDING SAFETY AND HEALTH

AWS SHB : 1999

SOLDERING HANDBOOK(SOLDERING MANUAL)

AWS SHB ANNEX A : 1999

ANNEX A(SOLDERING MANUAL)

AWS SHB ANNEX B : 1999

ANNEX B(SOLDERING MANUAL)

AWS SHB ANNEX C : 1999

ANNEX C(SOLDERING MANUAL)

AWS SHB ANNEX D : 1999

ANNEX D(SOLDERING MANUAL)

AWS SHB ANNEX E : 1999

ANNEX E(SOLDERING MANUAL)

AWS SHB CH 1 : 1999

FUNDAMENTALS OF SOLDERING TECHNOLOGY(SOLDERING MANUAL)

AWS SHB CH 2 : 1999

SOLDERS MATERIALS(SOLDERING MANUAL)

AWS SHB CH 3 : 1999

SUBSTRATE MATERIALS(SOLDERING MANUAL)

AWS SHB CH 4 : 1999

FLUXES(SOLDERING MANUAL)

AWS SHB CH 5 : 1999

SOLDER PASTES(SOLDERING MANUAL)

AWS SHB CH 6 : 1999

ASSEMBLY PROCESSES(SOLDERING MANUAL)

AWS SHB CH 7 : 1999

INSPECTION TECHNIQUES FOR PRODUCT ACCEPTANCE AND PROCESS
OPTIMIZATION(SOLDERING MANUAL)

AWS SHB CH 8 : 1999

ENVIRONMENTAL, SAFETY, AND HEALTH(SOLDERING MANUAL)

AWS SHB INDEX : 1999

INDEX TO SOLDERING HANDBOOK(SOLDERING MANUAL)

iranstd.webs.com 24 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS SHB INTRO : 1999

SOLDERING HANDBOOK(SOLDERING MANUAL)

AWS SHF : 2003

SAFETY AND HEALTH FACT SHEETS THIRD EDITION

AWS SP : 1988
SAFE PRACTICES REPRINT OF WHB-1 CH 16

AWS TSM : 1996

THERMAL SPRAY MANUAL - A PRACTICLE REFERENCE GUIDE

AWS TSS : 1985

THERMAL SPRAYING - PRACTICE, THEORY, AND APPLICATION

AWS UEAW : 1986

HANDBOOK ON THE ULTRASONIC EXAMINATION OF AUSTENITIC WELDS

AWS UGFM : 1995

AWS USER'S GUIDE TO FILLER METALS

AWS VIW-M : 1997

VISUAL INSPECTION WORKSHOP REFERENCE MANUAL

AWS VIW-IM : 1998

VISUAL INSPECTION WORKSHOP INSTRUCTORS MANUAL

AWS WCI : 1985

WELDING OF CAST IRON - A SELECTION OF PAPERS

AWS WFDP : 1982

WELDING FUME CONTROL, A DEMONSTRATION PROJECT 1982

AWS WHB-1.9 : 2001

WELDING SCIENCE AND TECHNOLOGY NINTH EDITION; VOLUME I(WELDING HANDBOOK,

AWS WHB-1.9 APP A : 1000

TERMS AND DEFINITIONS(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 APP B : 1000

METRIC PRACTICE GUIDE FOR THE WELDING INDUSTRY(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 1 : 1000

SURVEY OF JOINING, CUTTING, AND ALLIED PROCESSES(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 2 : 1000

PHYSICS OF WELDING AND CUTTING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 3 : 1000

HEAT FLOW IN WELDING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 4 : 1000

WELDING METALLURGY(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 5 : 1000

iranstd.webs.com 25 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

DESIGN FOR WELDING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 6 : 1000

TEST METHODS FOR EVALUATING WELDED JOINTS(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 7 : 1000

RESIDUAL STRESS AND DISTORTION(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 8 : 1000

SYMBOLS FOR JOINING AND INSPECTION(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 9 : 1000

WELDMENT TOOLING AND POSITIONING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 10 : 1000

MONITORING AND CONTROL OF WELDING AND JOINING PROCESS(WELDING HANDBOOK,

AWS WHB-1.9 CH 11 : 1000

MECHANIZED, AUTOMATED, AND ROBOTIC WELDING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 12 : 1000

ECONOMICS OF WELDING AND CUTTING(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 13 : 1000

WELD QUALITY(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 14 : 1000

WELDING INSPECTION AND NONDESTRUCTIVE EXAMINATION(WELDING HANDBOOK, VOLUME

AWS WHB-1.9 CH 15 : 1000

QUALIFICATION AND CERTIFICATION(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 16 : 1000

CODES AND OTHER STANDARDS(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 CH 17 : 1000

SAFE PRACTICES

AWS WHB-1.9 HDBK : 2001

WELDING SCIENCE AND TECHNOLOGY(WELDING HANDBOOK, VOLUME 1)

AWS WHB-1.9 IMS : 1000

INDEX OF MAJOR SUBJECTS

AWS WHB-1.9 INDEX : 1000

INDEX

AWS WHB-2 : 1991

WELDING HANDBOOK VOLUME 2 EIGHTH EDITION(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 1 : 1000

ARC WELDING POWER SOURCES(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 2 : 1000

SHIELDED METAL ARC WELDING(WELDING HANDBOOK, VOL. 2)

iranstd.webs.com 26 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS WHB-2 CH 3 : 1000

GAS TUNGSTEN ARC WELDING(WELDING HANDBOOK, VOL. 2)

5AWS WHB-2 CH 4 : 1000

GAS METAL ARC WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 5 : 1000

FLUX CORED ARC WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 6 : 1000

SUBMERGED ARC WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 7 : 1000

ELECTROGAS WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 8 : 1000

ELECTROSLAG WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 9 : 1000

STUD WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 10 : 1000

PLASMA ARC WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 11 : 1000

OXYFUEL GAS WELDING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 12 : 1000

BRAZING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 13 : 1000

SOLDERING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 14 : 1000

OXYGEN CUTTING(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 CH 15 : 1000

ARC CUTTING AND GOUGING

AWS WHB-2 CH 16 : 1000

LASER BEAM AND WATER JET CUTTING

AWS WHB-2 CH 17 : 1000

SPOT, SEAM, AND PROJECTION WELDING

AWS WHB-2 CH 18 : 1000

FLASH, UPSET, AND PERCUSSION WELDING

AWS WHB-2 CH 19 : 1000

RESISTANCE WELDING EQUIPMENT

AWS WHB-2 CH 20 : 1000

HIGH-FREQUENCY WELDING

iranstd.webs.com 27 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS WHB-2 CH 21 : 1000

ELECTRON BEAM WELDING

AWS WHB-2 CH 22 : 1000

LASER BEAM WELDING

AWS WHB-2 CH 23 : 1000

FRICTION WELDING

AWS WHB-2 CH 24 : 1000

EXPLOSION WELDING

AWS WHB-2 CH 25 : 1000

ULTRASONIC WELDING

AWS WHB-2 CH 26 : 1000

DIFFUSION WELDING AND BRAZING

AWS WHB-2 CH 27 : 1000

ADHESIVE BONDING OF METALS

AWS WHB-2 CH 28 : 1000

THERMAL SPRAYING

AWS WHB-2 CH 29 : 1000

OTHER WELDING PROCESSES

AWS WHB-2 HDBK : 1990

WELDING HANDBOOK VOLUME 2 EIGHTH EDITION(WELDING HANDBOOK, VOL. 2)

AWS WHB-2 INDEX : 1000

INDEX(WELDING HANDBOOK, VOL. 2)

AWS WHB-3 : 1996

MATERIALS AND APPLICATIONS - PART 1(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 1 : 1000

ALUMINUM AND ALUMINUM ALLOYS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 2 : 1000

MAGNESIUM AND MAGNESIUM ALLOYS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 3 : 1000

COPPER AND COPPER ALLOYS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 4 : 1000

NICKEL AND COBALT ALLOYS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 5 : 1000

LEAD AND ZINC(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 6 : 1000

PLASTICS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 7 : 1000

iranstd.webs.com 28 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

COMPOSITES(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 8 : 1000

CERAMICS(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 9 : 1000

MAINTENANCE AND REPAIR WELDING(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 CH 10 : 1000

UNDERWATER WELDING AND CUTTING(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 HDBK : 1996

MATERIALS AND APPLICATIONS - PART 1(WELDING HANDBOOK, VOL. 3)

AWS WHB-3 INDEX : 1000

INDEX(WELDING HANDBOOK, VOL. 3)

AWS WHB-4 : 1982

METALS AND THEIR WELDABILITY(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 : 1998

MATERIALS AND APPLICATIONS - PART 2 EIGHTH EDITION(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 1 : 1998

CARBON AND LOW-ALLOY STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 2 : 1998

HIGH-ALLOY STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 3 : 1998

COATED STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 4 : 1998

TOOL AND DIE STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 6 : 1998

CLAD AND DISSIMILAR METALS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 7 : 1998

SURFACING(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 8 : 1998

CAST IRONS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 9 : 1998

TITANIUM AND TITANIUM ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 CH 10 : 1998

REACTIVE REFRACTORY, AND PRECIOUS METALS AND ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 HDBK : 1998

MATERIALS AND APPLICATIONS - PART 2 EIGHTH EDITION(WELDING HANDBOOK, VOL. 4)

AWS WHB-4-2 INDEX : 1998

WELDING HANDBOOK INDEX OF MAJOR SUBJECTS(WELDING HANDBOOK, VOL. 4)

iranstd.webs.com 29 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS WHB-4 CH 1 : 1000

CARBON AND LOW ALLOY STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 2 : 1000

STAINLESS STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 3 : 1000

TOOL AND DIE STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 4 : 1000

HIGH ALLOY STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 5 : 1000

CAST IRONS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 6 : 1000

NICKEL AND COBALT ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 7 : 1000

COPPER ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 8 : 1000

ALUMINUM ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 9 : 1000

MAGNESIUM ALLOYS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 10 : 1000

TITANIUM, ZIRCONIUM, HAFNIUM, TANTALUM, AND COLUMBIUM(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 11 : 1000

OTHER METALS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 CH 12 : 1000

DISSIMILAR METALS(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 HDBK : 1982

METALS AND THEIR WELDABILITY(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 INDEX : 1000

INDEX(WELDING HANDBOOK, VOL. 4)

AWS WHB-4 PT 2 CH 5 : 1998

STAINLESS AND HEAT-RESISTING STEELS(WELDING HANDBOOK, VOL. 4)

AWS WHB-5 CH 1 : 1000

DESIGN FOR WELDING(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 2 : 1000

SYMBOLS FOR WELDING, BRAZING, AND NONDESTRUCTIVE EXAMINATION(WELDING
HANDBOOK, VOL. 5)

AWS WHB-5 CH 3 : 1000

ECONOMICS AND COST ESTIMATING(WELDING HANDBOOK, VOL. 5)

iranstd.webs.com 30 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS WHB-5 CH 4 : 1000

FIXTURES AND POSITIONERS(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 5 : 1000

AUTOMATION AND CONTROL(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 6 : 1000

CODES AND STANDARDS(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 7 : 1000

QUALIFICATION AND CERTIFICATION(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 8 : 1000

WELD QUALITY(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 9 : 1000

INSPECTION(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 CH 10 : 1000

SAFE PRACTICES(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 HDBK : 1984

ENGINEERING, COSTS, QUALITY, AND SAFETY(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 INDEX : 1000

INDEX(WELDING HANDBOOK, VOL. 5)

AWS WHB-5 TB : 1984

ENGINEERING, COSTS, QUALITY, AND SAFETY(WELDING HANDBOOK, VOL. 5) TABLE OF

AWS WI : 2000
WELDING INSPECTION HANDBOOK THIRD EDITION(WELDING INSPECTION)

AWS WI CH 1 : 2000
APPLICATION AND SCOPE(WELDING INSPECTION)

AWS WI CH 2 : 2000
SYMBOLS(WELDING INSPECTION)

AWS WI CH 3 : 2000
REQUIREMENTS FOR THE WELDING INSPECTOR(WELDING INSPECTION)

AWS WI CH 4 : 2000
WELDING INSPECTION OPERATIONS(WELDING INSPECTION)

AWS WI CH 5 : 2000
INSPECTION SAFETY CONSIDERATIONS(WELDING INSPECTION)

AWS WI CH 6 : 2000
QUALITY ASSURANCE(WELDING INSPECTION)

AWS WI CH 7 : 2000
FERROUS WELDING METALLURGY(WELDING INSPECTION)

iranstd.webs.com 31 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

AWS WI CH 8 : 2000
PREHEATING AND POSTWELD HEAT TREATING(WELDING INSPECTION)

AWS WI CH 9 : 2000
WELD AND WELD RELATED DISCONTINUITIES(WELDING INSPECTION)

AWS WI CH 10 : 2000
QUALIFICATION OF WELDING PROCEDURE SPECIFICATIONS(WELDING INSPECTION)

AWS WI CH 11 : 2000
QUALIFICATION OF WELDERS AND WELDING OPERATORS(WELDING INSPECTION)

AWS WI CH 12 : 2000
COMPUTERIZATION OF WELDING INSPECTION AND QUALITY(WELDING INSPECTION)

AWS WI CH 13 : 2000
DESTRUCTIVE TESTING OF WELDS(WELDING INSPECTION)

AWS WI CH 14 : 2000
PROOF TESTS(WELDING INSPECTION)

AWS WI CH 15 : 2000
NONDESTRUCTIVE EXAMINATION METHODS(WELDING INSPECTION)

AWS WI CH 16 : 2000
QUALIFICATION OF NONDESTRUCTIVE EXAMINATION PERSONNEL(WELDING INSPECTION)

AWS WI CH 17 : 2000
CODES AND OTHER STANDARDS(WELDING INSPECTION)

AWS WI CH 18 : 2000
METRIC PRACTICE(WELDING INSPECTION)

AWS WI INDEX : 2000

INDEX TO WELDING INSPECTION(WELDING INSPECTION)

AWS WI TABLE OF CONTENTS : 2000

WELDING INSPECTION HANDBOOK THIRD EDITION(WELDING INSPECTION)

AWS WIT-T : 2000

WELDING INSPECTION TECHNOLOGY FOURTH EDITION

AWS WIT-W-99 : 1999

WELDING INSPECTION TECHNOLOGY WOOKBOOK THIRD EDITION

AWS WJT-G : 1995

JOINT - WELD TERMINOLOGY AND STANDARD WELDING SYMBOLS INTERPRETATION

AWS WM 1.4 : 1994

WELDING METALLURGY VOLUME I, FUNDAMENTALS FOURTH EDITION; VOLUME 1

AWS WQAG : 1997

WELDING QUALITY ASSURANCE GUIDELINE FOR FABRICATORS

AWS WZC : 1972

iranstd.webs.com 32 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com

 iranstd.webs.com [email protected]

WELDING ZINC-COATED STEEL FIRST EDITION

iranstd.webs.com 33 09358129391

PDF created with pdfFactory Pro trial version www.pdffactory.com