NATIONAL PIPE HANGER CORPORATION
FIG. NR20 Pre-Insulated Pipe Riser Clamp
For Upward and Downward Riser Loads
Ordering: Fig. NR20 - (Pipe Size) x (Insulation Thickness)-(Finish) e.g. NR20-3x1-P
PIPE VERT. INS. THK. = 1” INS. THK. = 11/2” INS. THK. = 2” INS. THK. = 21/2” INS. THK. = 3” INS. THK. = 4”
A B C D
SIZE LOAD E F E F E F E F E F E F
2” 750 0.63 1.05 1
/2 x 4 2 12.38 5.63 13.5 6.69 14.5 7.75 15.5 8.75 16.5 9.75 18.63 11.88
21/2” 900 0.63 1.05 1
/2 x 4 2 12.88 6.13 14.25 7.75 15.5 8.75 16.5 9.75 17.5 10.75 19.63 12.88
3” 1200 0.63 1.05 1
/2 x 4 2 13.5 6.69 14.5 7.75 15.5 8.75 16.5 9.75 17.5 10.75 19.63 12.88
4” 1800 0.63 1.05 1
/2 x 4 2 14.5 7.75 15.5 8.75 16.5 9.75 17.63 10.75 18.63 11.88 20.63 13.88
5” 2400 0.63 1.05 1
/2 x 4 2 15.5 8.75 16.5 9.75 17.5 10.75 18.63 11.88 19.63 12.88 21.88 15.13
6” 3000 0.88 1.05 1
/2 x 6 4 16.5 9.75 17.63 10.75 18.63 11.88 19.63 12.88 20.63 13.88 22.88 16.13
8” 3900 0.88 1.05 1
/2 x 6 4 18.63 11.88 19.63 12.88 20.63 13.88 21.75 15.13 22.88 16.13 24.88 18.13
10” 4800 1.13 1.05 1
/2 x 6 4 21.38 13.88 22.5 15.13 23.63 16.13 24.63 17.13 25.63 18.13 27.63 20.13
12” 6800 1.13 1.315 1
/2 x 8 6 23.88 16.13 24.88 17.13 25.88 18.13 26.88 19.13 27.88 20.13 29.88 22.13
14” 8000 1.13 1.315 1
/2 x 8 6 24.88 17.13 25.88 18.13 26.88 19.13 27.88 20.13 28.88 21.13 30.88 23.13
16” 9200 1.13 1.315 5
/8 x 8 6 27.38 19.38 28.38 20.38 29.38 21.38 30.38 22.38 31.38 23.38 33.38 25.38
18” 10000 1.13 1.315 5
/8 x 8 6 29.38 21.38 30.38 22.38 31.38 23.38 32.38 24.38 33.38 25.38 35.38 27.38
20” 10800 1.13 1.315 5
/8 x 8 6 31.38 23.38 32.38 24.38 33.38 25.38 34.38 26.38 35.38 27.38 37.38 29.38
24” 11200 1.13 1.66 5
/8 x 8 6 36.38 27.38 37.38 28.38 38.38 29.38 39.38 30.38 40.38 31.38 42.38 33.38
Applications: Features: Material Data:
• Provides vertical support to upward • Provides continuous, zero permeability vapor Insulation: Calcium Silicate meeting
and downward riser loads barrier ASTM C-585 and
• Structural insulation for load transfer C-656 Type II Grade 6
• Designed for use on: • ASTM E-84 Flame Spread/Smoke Developed: 10/20 900 psi, 28 pcf
Chilled Water Hot Water Steam • Thermal Conductivity other insulation materials, Page 34
0.61 Btu•in/(hr•ft2•°F) @ 200°F Base/Clamp: ASTM A-36 Carbon Steel
• Installation: welded to a flat surface or • Insulation chemically bonded Fasteners: ASTM A-307 Electro-Galv. Plated
rigidly braced • Four thrust plates shipped loose for field welding Shield: ASTM A-653 G-90, 18 ga Galv. Steel
• Temperature Range: +20°F to +1200°F Vapor Barrier: ASTM E-96 All Service Jacket
• Vertical Load ratings do not include • Outside hanger bolt is offset to accomodate Finishes: (H) Hot-Dip Galv. per ASTM A-123
local stress evaluation at thrust weldless eye nut on sizes 6” and above. (P) Painted Red Shop Primer
plate/pipe wall interface. Contact (B) Unfinished
factory for assistance. • See National Pipe Hanger Corporation’s
Pipe Hangers and Supports Catalog
for hardware and upper attachments.
Risers NJ (609) 261-5353 www.nationalpipehanger.com MD (301) 568-8805
May 24, 2017
