Scribd
Upload
746 views2 pages

S225LC-V Bomba de Inyeccion

This document provides calibration data for the S225LC-V(ECOEB) engine, including specifications for the injection pump assembly, nozzle holder assembly, nozzle, injection pipes, and injection order. It lists the test conditions and standard engine parts used, and provides the rack curve and boost pressure curve for the standard injection pump 65.11101-7391.

Uploaded by

Gonzalo Orlandini Lazcano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
746 views2 pages

S225LC-V Bomba de Inyeccion

This document provides calibration data for the S225LC-V(ECOEB) engine, including specifications for the injection pump assembly, nozzle holder assembly, nozzle, injection pipes, and injection order. It lists the test conditions and standard engine parts used, and provides the rack curve and boost pressure curve for the standard injection pump 65.11101-7391.

Uploaded by

Gonzalo Orlandini Lazcano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DB58TIS Engine Calibration Data

== S225LC-V(ECOEB) Calibration Data ==


(1) Injection pump assembly : 65.11101-7391 (101605-830A DOOWON)
- Injection pump : KP-PES6AD100B410R (101062-826A)
- Governor : KP-EP/RSV200-1350AQ49A311(105411-2340)
- Plunger and barrel : 131150-2600 131100-8600
- Delivery valve : 131160-3620
- Feed pump : KP-FP/KS-AD (105220-6490)
- Prestroke : 3.8±0.05mm
- Coupling : 156639-882C
(2) Nozzle holder assembly : 65.10101-7092 (105160-5420 DOOWON)
(3) Nozzle : 65.10102-6064 (105025-4200 DOOWON)
(4) Injection pipe: : 65.10301-6088, 65.10301-6089
(5) Injection order: :1–5–3–6–2–4

Nozzle & holder ass’y 105780-8140 Opening pressure :175kg/cm2


(A) Test condition
Injection pipe(IDxODxL) - φ2.0 x φ6.0 – 600 mm
for injection pump
Test oil ISO4113 Temperature : 40 ±5°C
65.10102-6064 Nozzle (7 x φ0.22)
Nozzle & holder ass’y
(B) Engine standard parts 65.10101-7092 190 kg/cm2
Injection pipe(IDxODxL) 65.10301-6088,6089 φ1.8xφ6.0x912mm
Rack diagram and setting valve at each point : Specification of standard pump(65.11101-7391)
Injection Q`ty on RIG
Rack Pump
Check (mm3 / 1,000st) Press.
position speed
Point (A) Test condition (B) Engine (mmHg)
(mm) (rpm)
for inj. pump standard parts
A R1(10.6) 1,000 105 ±1.5 92
B 6.7 550 22 ±2.0 -
C 6.7 550 (96) Above 400

D (R1-0.9) 550 (81) 82 -


E - 100 95±10 -
Boost pressure : zero boost
Fuel injection pump
Plunger φ10 Left hand 20+50 lead retraction pressure 59mm3/st(φ6x2.1mm)
Max. pump speed
2,100 rpm opening pressure 20.8 kgf/cm2
(limit plunger bouncing) Delivery valve
Holder delivery valve
- Spring k=1.63 kgf/mm
with damping valve
Governor
Governor weight 740 g Lever ratio (min. speed / max. speed) 1 : 1.2 / 1 : 1.2
Governor spring k=10 kgf/mm Idling sub spring k=2.1 kgf/mm
Idling spring k=2.6 kgf/mm Start spring k=0.005 kgf/mm
Boost compensator spring k=0.6 kgf/mm
Feed pump
Max. operating pressure 3.4 kgf/cm2 Piston spring k=0.735 kgf/mm

Printed in Jan. 2003 PS-MMA0300-E1A


DB58/T/TI/TIS

(6) Rack curve and boost pressure of standard injection pump (65.11101-7391)

Rack curve

Boost pressure

Printed in Jan. 2003 PS-MMA0300-E1A

You might also like