Scribd
Upload
122 views1 page

TLS2 Software Upgrade Instructions

1. Remove the old TLS2 system software chips (U19, U22, and U25) from their sockets by using the chip removal tool to lift the corner of each chip out of its socket at a 45 degree angle. 2. Insert the new grade U19, U22, and U25 chips into their respective sockets, aligning the angled corner of each chip with the angled corner of its socket. 3. Turn on power to the TLS2 console to allow the system to automatically update the software during the boot process.

Uploaded by

ShalvaTavdgiridze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views1 page

TLS2 Software Upgrade Instructions

1. Remove the old TLS2 system software chips (U19, U22, and U25) from their sockets by using the chip removal tool to lift the corner of each chip out of its socket at a 45 degree angle. 2. Insert the new grade U19, U22, and U25 chips into their respective sockets, aligning the angled corner of each chip with the angled corner of its socket. 3. Turn on power to the TLS2 console to allow the system to automatically update the software during the boot process.

Uploaded by

ShalvaTavdgiridze
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TLS2 Software Upgrade Instructions




 

   




1 
   ! "#$ % &' (!   )  ! 
* %   !  %  +(! &# (
!  %   ,! % -&

2 "* ! . * ! '/)')* ', 0(


 -&

U19 U22 U25

U19 U22 U25


-XX -XX -XX STATIC SENSITIVE DEVICE
Take antistatic precautions when
handling these chips, such as
wearing an antistatic wrist strap.

TLS2 System Software Chips consoles/tls2/softchng.eps


 
!"
#$%

3 0%% (!  


  0(
 )  '/)')* ' ! 1 
 (! !  *%% ! 1&

Chip Removal Tool


Removable (P/N 576036-022)
chip

U19 Chip socket


-XX
Incorrect Correct
Angle Angle

Chip removal slots (2)


Chip socket

INCORRECT CORRECT
ANGLE ANGLE

Tool Tool

Cutaway of Cutaway of
chip in socket chip in socket

Hook down too When you rotate Hook in correct When you rotate tool,
far and rests in tool, you will crack position under chip you will lift the corner
socket indent the chip socket. of the chip out of the
socket (alternate
between two chip
consoles\tls2\softchng2.eps removal slots)



 &#$%

4 2!! %* !   )   *!! 


(* ! ,'/)')* '- !    1 ,*%( ! ! +* (%  
!! * (%  1 , 0(
 -&

Angled corner
of socket

Angled corner
consoles\tls2\softchng3.eps of chip


 '&&#$'%(&)


5  .!*.
!* '/)')* ' !   1 , 0(
 -&$% !  *  %*  &
 3   ! "#
$ % &! . %%*

* ! * 
 (!  
&




You might also like