TENDER SCHEDULE FOR CONSTRUCTION & DECORATION WORKS OF IFIC BANK LTD.
,
PROPOSED JURI BRANCH,MOULVIBAZAR
Sl Details Amount (TK)
A Front Lifting Work
B Civil Work
C Decoration Work
D Electrical Work
Total (Front lifting, civil, decoration & electrical work) =
1OF10
TENDER SCHEDULE FOR CONSTRUCTION & DECORATION WORKS OF IFIC BANK LTD.,
PROPOSED JURI BRANCH,MOULVIBAZAR
SL Particulars Qty. Unit Rate Amount
A. Front Lifting Work
1 ALUMINIUM COMPOSITE PANEL WORK 300.00 Sq.ft
Supply, fitting & fixing of aluminium composite panel (6mm thick.) of
approved color and quality cladded on standard and necessary aluminium or
galvanized framing (size-1 inch x 1 inch sq.box )etc. all complete as per design
and full satisfaction of Bank Authority.
2 ALUMINIUM FIXED LOUVER PANEL WORK 280.00 Sq.ft
Supply, fitting & fixing of 2 inch x 1.5 inch or standered Aluminium Fixed
louver with Silver Colour of “Chung Hua” Brand having wall thickness of and
anodization coat of not less then 15 micron with MS frame etc. all complete
as per drawings-design & direction of the Bank Authority.
3 WEATHER COAT ( Berger) 700.00 Sq.ft
Painting work in 3 coats of weather coat (Burger) of approved colour and
quality over a coat of primer seal including cleaning the surface, rubbing by
pumice stone, sand papering, synthetic putty and necessary scaffolding for all
floors etc. all complete as per direction and full satisfaction of the Bank
Authotiy.
4 TILES WORK ON EXTERIOR WALL 350.00 Sq.ft
Supply and cladding of 2'X1' Wall tiles (GW, code-1110ZMBE/CHARU) with
average 19 mm thick cement morter ( 1:2 ) including cutting, grinding and
polishing the stone, setting in position keeping horizontal & vertical alignment
with care, proper pointing etc. all complete as per design and full satisfaction
of Bank authority.
5 Logo of IFIC Bank Ltd.Supply, fitting, fixing of the Logo of IFIC Bank of size 48” 2.00 no
x 36” on wall tiles at the front side of the Branch premises made of 8 mm
thick Acrylic Plastic including all accessories needed as per instruction of Bank
Authority /Bank’s Consultant.
6 THAI ALUMINIUM & GLASS WORK (For window) 100.00 Sq.ft
Supply, fitting & fixing of aluminium “Chung Hua”(silver color) and 6mm
mercury glass for window with accessories like lock, sealant, other hardware
etc. all complete and full satisfaction of Bank Authority.
7 GRILL WORK (For AC & Generator room) 110.00 Sq.ft
Supply, fitting & fixing of window grill made of 3/4" @ 4" c/c MS square bar
for vertical member & 3/4" MS flat bar fpr peripheral frame and 1/2" @ 4"
c/c MS square bar for horizontal members in position by proper welding,
Cutting bars and size to required shape and setting the entire fencing
properly, rust removing & grinding the joints etc. all complete as per direction
and full satisfaction of the Engineer in charge.
Total front lift work =
2OF10
SL Particulars Qty. Unit Rate Amount
B. Civil Work
1 5" BRICK WORK 700.00 Sq.ft
5" brick work with 1st class bricks, cement (fresh cement conforming to
BDS232), sand (F.M.1.5), mortor (1:4), making bonds with connected walls,
raking out joints, sorting, cleaning and soaking the bricks for at least 24 hours
before use, screening & washing the sand, curing completed masonry at least
for 7 (seven) days including supply of all necessary materials, at site
scaffoldings, water, electricity and also all other charges etc., all complete as
per approval and direction of the consulting architectand and full satisfaction
of the Bank authority.
2 PLASTER WORK 480.00 Sq.ft
Minimum 12mm thick cement sand (F.M. not below 1.2) plaster (1:6) with
fresh cement (conforming to BDS232) Scane/supercrete /Lafarge to both
inner and outer surfaces of walls, finishing corners and edges, screening and
washing sand, preparing the masonry and others surfaces by cleaning and
washing, curing completed plaster for at least 10 (ten) days including supply
at site of all necessary materials, scaffoldings, water, electricity and also other
charges etc., all complete as per approval and directions of the consulting
architect and full satisfaction of the Bank authority.
3 R.C.C work for false slab,lintel (1:2:4) with reinforcement : R.C.C work (1:2:4) 380.00 Cft
using Cement (Scane/supercrete /Lafarge) ,Sand & Brick chips with required
reinforcement & shuttering work at different location with labour charge
washing, washing of sand, local carriage, scaffolding, curing etc. (As per detail
drawing)
4 Cash Counter made of 20mm thick laminated board (MRS, OAK-1 ) including 21.00 Rft
edge finished work with high counter top clad with 18/20 mm thick "Granite/
Marble (ZAIM brand) top of desired color, low counter top clad with 20 mm
thick “laminated Board (MRS, OAK-1), quality including locks, support rubber
mountings and other standard hardwares etc.and finishing with care etc. with
8mm glass with “Diamond Cutting” beveling and fixed with partitions with S.S.
Finished attachments, 4 feet long “Eastern Tube Light” with Australian Ballast,
Starter etc., one cash box (three drawers with lock) (H-27”xW-14”xD-18”) for
each Teller Counter made of 18 SWG steel sheet etc. all complete as per
design and instruction of Bank Authority.
5 CLADDING OF BLACK GRANITE (Galaxy Type) strip of 3 inch or 2 inch width 15.00 Sft.
and 12 mm thickness on the mirror polish tiles work on columns and walls as
per design of the bank authority.
6 TILES WORK ON ENTRY WALL 250.00 Sq.ft
Supply and cladding of 2'X1' Wall tiles (GW, code-1110ZMBE/CHARU)) with
average 19 mm thick cement morter ( 1:2 ) including cutting, grinding and
polishing the stone, setting in position keeping horizontal & vertical alignment
with care, proper pointing etc. all complete as per design and full satisfaction
of Bank authority.
Total civil work =
C. Decoration Work
1 PLASTIC PAINT (Berger) 6,000.00 Sq.ft
Painting work with 2 coats of plastic paint (Berger) of aprroved colour and
quality over a coat of primer seal including cleaning the surface, rubbing by
pumice stone, sand papering, synthetic putty and necessary scaffolding for all
floors etc. all complete as per design, direction and full satisfaction of the
Bank authority.
3OF10
SL Particulars Qty. Unit Rate Amount
2 ENAMEL PAINT (Berger) 600.00 Sq.ft
Painting work with 2 coats of enamel paint (Berger) as per approved colour
and quality over a coat of primer seal including cleaning the surface, sand
papering, putty and necessary scaffolding for all floors etc. all complete as per
design, direction and full satisfaction of the Bank authority.
3 ALUMINIUM SLIDING DOOR & FIXED PARTITION 80.00 Sq.ft
Supply, fitting & fixing of Aluminium sliding door & fixed partition with
75mm wide section Silver Colour of “Chung Hua” Brand having wall thickness
of 1.5mm for main sections and anodization coat of not less then 15 micron
with 5mm thick clear glass etc. all complete as per drawings-design &
direction of the Bank Authority.
4 TEMPERED GLASS DOOR (3'-0" X 7'-0") OR (3'-6''X7'-0'') F0R MAIN ENTRY, 4.00 Nos.
MANAGER ROOM & CASH COUNTER
Supply, fitting & fixing of Imported 10 mm Tempered Glass door shutter
(Imported) with door closer (VVP) at lower side, stainless steel handle (L-18
inch) , lower side lock, hinge & other accessories etc. all complete as per
design, direction and full satisfaction of the Bank authority.
5 10 MM THICK FIXED CLEAR GLASS PARTITION WITH 25 MM SS "U" SECTION 450.00 sft
(PARTITION HEIGHT 8'-0"):
Supply, fitting & fixing of Aluminum fixed partition with 25 mm "U" section of
“Silver” Color of “Chung Hua” Brand having wall thickness of not less then 15
micron with 10 mm thick clear glass, all complete as per direction & full
satisfaction of the Bank authority.
6 GLASS PANEL WORK (FOR COLUMN, ) 350.00 Sq.ft
Supply , fitting & fixing column made of 10 mm Tempered glass over 10 mm
thick plain board panel with frame work of 2"X1" best quality seasoned
Garjon wood etc. all complete as design, directed and full satisfaction of Bank
Authority.
7 SOLID FLUSH DOOR SHUTTER WITH FRAME (Store, Kitchen & Generator rm) 240.00 sft
Supply, fitting & fixing of best quality 37mm thick Gorzon veneer solid flush
door (partex) including frame by best quality seasoned Teak Chambol wood
2.5" X 6" section with supply of best quality hardware, 4" metal hinges,
clamps, coal tarring of frame etc. all complete as per direction and full
satisfaction of the Bank authority.
8 SOLID PVC FLUSH DOOR SHUTTER WITH FRAME (Toilets) 2.00 No
Supply, fitting and fixing of best quality 37mm thick Solid core PVC flush
door(cosmic), white color, including frame by best quality Plastic wood 2.5"
X 6" section with the supply of best quality hardware, 4" metal hinges,
clamps, coal tarring of frame etc. all complete as directed and full satisfaction
of the Bank authority.
9 DOOR LOCK 5.00 Nos.
Supply, fitting & fixing of round cylinder type Imported door lock in position
of best quality silver colour with all required accessories ensuring minimum
injury to door shutter and frame etc. all complete as per direction and full
satisfaction of the Bank authority.
10 DOOR CLOSER 6.00 Nos.
Supply, fitting & fixing of imported door closer of approved quality in position
including all accessories, ensuring minimum injury to door shutter and frame
etc. all complete as per direction and full satisfaction of the Bank authority.
4OF10
SL Particulars Qty. Unit Rate Amount
11 ENGRAVED GYPSUM BOARD CEILING 1,300.00 Sq.ft
Supply, fitting and fixing of 10 mm Engraved Gypsum board false ceiling
(Local, partex) over powder coated T-bar of section 1" X 1.5" and L-angle of
section 1" X 1" at edges, at 2'-0" X 2'-0" grid suspended ceiling by royal plug,
iron angles, screws, hooks, nails etc. maintaining straight lines and desired
finished level at bottom face with vertical or beams by electric drill machine
and mending damage if any during the materials, accessories, scaffolding,
labour for installation etc. all complete as per design, direction and full
satisfaction of the Bank authority.
12 JOINT LESS GYPSUM CEILING 1,200.00 Sft.
Supply, fitting, fixing of Joint less Gypsum ceiling (Imported, elephant brand)
with 12 mm gypsum board having joint with mild steel frame support with
proper metal clip fasterner, providing channel all around the periphery edges
of the board and others required metal edging including plastic paint include
punches for ducts, lights etc. all complete as design, direction & full
satisfaction of Bank authority.
13 FALSE DROP WALL MADE OF PLAIN PARTICLE BOARD : 105.00 Rft.
Supplying, fitting & fixing 3 inch width false ceiling of 12mm thick Plain star
particle board suspended from existing R.C.C. slab of the building at the
desired level with one side finishing including plastic painting of 3 coats
(Berger) over a coat of priming with synthetic enamel paint (Berger) of best
quality & approved colour etc. with hanging seasoned Garjan wood frame of
section 50mm x 25mm at 600mm x 600mm in grid and moulding bits by
plugs, nails, screws etc. in/c. treatment of inner surface with termite & damp
proofing agent maintaining leveled and finished exposed faces in/c. making
holes in wall and mending good the damages, if any, during execution of the
work in/c. cost and carriage of all materials , accessories, labour for
installation, scaffolding, screws, nails etc. All complete strictly as per direction
of the Bank Authority.
14 DECORATIVE FALSE CEILING MADE OF PLAIN PARTICLE BOARD: 800.00 Sft
Supplying, fitting & fixing false drop wall made of 12mm thick Plain Star
Particle Board suspended from existing R.C.C. slab of the building at desired
level with one side finishing including plastic painting of 3 coats (Berger) over
a coat of priming with synthetic enamel paint (Berger) of best quality &
approved colour etc. with seasoned Garjan wooden frame of section 75mm x
25mm at 600mm x 600mm grid and moulding bits by plugs, nails, screws etc.
including treatment of inner surface with termite & damp proofing agent
maintaining leveled and finished exposed faces including making holes in wall
and mending good the damages, if any, during execution of the work
including cost and carriage of all materials , accessories, labour for
installation, scaffolding, screws, nails etc. including All complete strictly as per
direction of the Bank Authority.
5OF10
SL Particulars Qty. Unit Rate Amount
15 DECORATIVE FALSE CEILING OF SUPER TEAK/RAMINI/TEXTURE VINEERED 240.00 Sft.
PARTICLE BOARD:
Supplying, fitting & fixing of false drop wall made of 12mm thick Teak
Vineered Board of "Star Particle Board Mill Ltd" suspended from existing
R.C.C. slab of the building at desired level with one side finishing including
plastic painting of 3 coats (Berger) over a coat of priming with synthetic
enamel paint (Berger) of best quality & approved colour etc. with seasoned
Garjan wooden frame of section 75mm x 25mm at 600mm x 600mm grid and
moulding bits by plugs, nails, screws etc. including treatment of inner surface
with termite & damp proofing agent maintaining leveled and finished
exposed faces including making holes in wall and mending good the damages,
if any, during execution of the work including cost and carriage of all
materials , accessories, labour for installation, scaffolding, screws, nails etc.
all complete strictly as per direction of Bank Authority.
16 COMMODE WITH LOW DOWN
Supply, fitting & fixing of RAK combi commode set with low down of
2.00 Nos.
grary/white color with other fittings etc. all complete as per full satisfaction
of Engineer in chrage. (RAK )
17 PADESTAL BASIN
Supply, fitting & fixing of RAK padestal basin set of grary/white color with
2.00 Nos.
other fittings all complete as per full satisfaction of Bank authority.
18 MIRROR 2.00 PCS
Supply, fitting & fixing of Mirror of best quality with necessary hardware etc.
foreign made, all complete as per direction & full satisfaction of Bank
authority.
19 STEEL SINK 1.00 No.
Supply, fitting & fixing of Stainless Steel sink (Local.RFL)) size 30" X 20" of
approved quality with necessary hardware etc. all complete as per full
satisfaction of Engineer in charge / Bank authority.
20 SANITARY FITTINGS
Supply, fitting & fixing of toilet fittings of approved quality with necessary
hardware etc. all complete as per full satisfaction of Architect/Engineer /
Bank authority.
Sink Cock (Nazma Brand) 1.00 No.
Angle Stop Cock (Nazma Brand) 5.00 Nos.
Bib cock (Nazma Brand) 2.00 Nos.
Two in one bib cock (Nazma Brand) 2.00 Nos.
Toilet PVC hand shower (cotto)) 2.00 Nos.
Gratings 5.00 Nos.
Paper holder (Nazma Brand) 2.00 Nos.
Soap case (Nazma Brand) 3.00 Nos.
Towel rail (Nazma Brand) 3.00 Nos.
Pillar cock (Sharif Brand) 5.00 Nos.
Basin waste (Sharif Brand) 4.00 Nos.
Sink waste (Sharif Brand) 2.00 Nos.
Connection pipe (Best quality) 6.00 Nos.
Magic pipe (Best quality) 10.00 Nos.
6OF10
SL Particulars Qty. Unit Rate Amount
21 PVC/PPR PIPE [FRESH WATER LINE FOR 02 TOILETS, WASH & KITCHEN] 1.00 L.S
Supplying, fitting and fixing best quality PVC/PPR pipe of required dia with all
special fittings, such as bends, elbows, sockets, reducing sockets, tees, unions,
jumnuts, etc. in/c cutting grooves where necessary and fitting the same in
concealed way with cement mortar, making holes in walls and floors and
mending good the damages etc, complete in all respect as per design drawing
and direction of Bank Authority.
22 UPVC [ SOIL & WASTE WATER] PIPE 1.00 L.S
Supplying, fitting and fixing 4" dia UPVC pipe made by National Polymer/ Aziz/
Approved quality with all fitting and specials like plain bend, tees, elbows,
junctions, etc. in/c gasket and cement joints, making holes in walls and floors
and mending good the damages etc, connecting up to main road sewerage fit
throw inspection pits complete in all respect as per design drawing and
direction of Bank Authority.
23 PATTERN FROSTED PAPER/STICKER WORK 380.00 Sq.ft
Supply, fitting & fixing of adhesive pettern frosted paper/sticker on clear
glass, pasting & cutting with fine finish etc. all complete as per design,
direction and full satisfaction of the Bank authority.
24 PVC FLOOR MAT FOR ENTRY 72.00 Sq.ft
Supply, fitting & fixing of imported best quality PVC floor mat of approved
colour, cutting with fine finish etc. all complete as per design, direction and
full satisfaction of the Bank authority.
25 COLLAPSIBLE GATE (Main entry) 85.00 Sq.ft
Supply, fitting & fixing collapsible gate made of 25mmX25mmX5mm MS angle
bar, 20mmX 5mm MS flat bar & necessary accessories etc. complete in all
respect as per design & direction and full satisfaction of the Bank authority.
26 NAME & LOGO 2.00 no
Supply, fitting, fixing of Logo and letter of IFIC Bank Ltd., size 48”x30”or
40"x20" on entrance wall made of Vinyl Sticker pasted on 8 mm thick Acrylic
Plastic including lighting as like as IT Division of our Head Office, including all
attachment screw etc. as per instruction of Bank Authority.
27 DSA TABLE 1.00 no
Supply, fitting & fixing of DSA Table (Size : 6'x2.5'or 5'x2') made of leminated
board (MRS, OAK-1 (3/4'' thick) with white formica pasting including
laminated board of approved color (MRS, OAK-1 ) and quality all
complete.support rubber mountings and other standard hardwares etc. all
complete as per standard design and full satisfaction of the Bank Authority
(Area to be considered for front side only).
28 OVERHEAD CABINET 20.00 Sft
Supply, fitting & fixing of Kitchen cabinet including shutter made of imported
laminated board of approved color (MRS, OAK-1) and quality including locks,
support rubber mountings and other standard hardwares etc. all complete as
per standard design and full satisfaction of the Engineer in charge (Area to be
considered for front side only).
29 Supply, fitting & fixing of Snake queue chain made for cash counter.of 8.00 no
approved color and quality including all complete as per standard design and
full satisfaction of the Engineer in charge .
7OF10
SL Particulars Qty. Unit Rate Amount
Total decoration work =
D. Electrical Work
1 Electrical Safety Certificate (Contractor will have to provide Electrical Safety 1.00 Job
Certificate from a reputed BSc. Electrical Engineer/Firm after completion of
work. )
2 PVC PIPE WORK
A. CONCEALED / EXPOSED CONDUIT(Aziz Brand)
Supply and laying of following water grade PVC pipe (Aziz brand) exposed on
false ceiling/Tray with galvanized saddle/hanger as per routing shown in the
drawing, specification and direction. The rate shall be inclusive the cost of
accessories such as bends, tees, sockets, circular boxes, pull wire, groove
cutting etc. all complete as per design and direction and full satisfaction of
Bank Authority.
3/4" dia PVC Pipe 2,400.00 R.ft
1" dia PVC Pipe 1,800.00 R.ft
3/4" dia flexible Pipe 1,000.00 R.ft
1" dia flexible Pipe 400.00 R.ft
2" dia flexible Pipe 200.00 R.ft
3 CABLE WORK (BRB)
A. Supply & installation including termination of PVC insulated or PVC
sheathed single core fire protected cable including all accessories of
following sizes all complete as per design and direction and full satisfaction of
Bank Authority.
1 X 1.5 rm BYA-FRLS cable (7 Wire) 15.00 Coil
1 X 2.5 rm BYA-FRLS cable (7 Wire) 8.00 Coil
1 X 4.0 rm BYA-FRLS cable (7 Wire) 8.00 Coil
1 X 6.0 rm BYA-FRLS cable (7 Wire) 2.00 Coil
B. Supply & installation including termination of PVC insulated PVC sheathed
multi core BRB/SQ cable including all accessories of following sizes all
complete as per design, direction and full satisfaction of Bank Authority.
4X 10 rm NYY FRLS Cable (7 Wire) 120.00 rft
4X 25 rm NYY FRLS Cable (19 Wire) 100.00 rft
C. EARTH CONTINUITY CONDUCTOR
Supply and installation of PVC insulated cable (single core BRB cable) as earth
continuity conductor along with cables in pre installed conduit, including
connection to various metallic parts of following sizes all complete as per
design, direction and full satisfaction of Bank Authority.
1.5 re BYA-FRLS (Green) 7.00 Coil
2.5 re BYA-FRLS (Green) 4.00 Coil
D.Telephone Cable
2 Pair Cable 3.00 coil
8OF10
SL Particulars Qty. Unit Rate Amount
4 SUB DISTRIBUTION BOARD
Supply and installation of SDB boxe(s) of 18 SWG sheet metal enclosed
hammer painted with hinged front cover with required nuts, bolts etc. having
knockout for conduit/cables entry and exit (Bottom/top as required) for
415/240V TP & N/SP&N operations. The box should have solid neutral link.
The MCCBs and MCBs and bas bar of 600Amp are to be supplied by the
contractor and be so arranged as to keep knobs of the MCCBs and MCBs
projected over the cover. Each box should have one copper earthing
block(3mm) and four copper block (5mm) for phases and neutral having
adequate required dia drilled holes for accommodating the terminals with
copper lug (where applicable) including required No.of brass nuts bolts etc.
The bus bar rate shall include the cost of best quality insulators etc. all
complete as design, direction & full satisfaction of Bank Authority.
SDB Box 2.00 Pcs
100A TP MCCB (Legrand) 1.00 Pcs
63A TP MCCB (Legrand) 2.00 Pcs
63A TP MCB (Legrand) 1.00 Pcs
32A TP MCB (Legrand) 3.00 Pcs
20A SP MCB (Legrand) 4.00 Pcs
16A SP MCB (Legrand) 12.00 Pcs
10A SP MCB (Legrand) 12.00 Pcs
10A DP MCB (Legrand) 1.00 Pcs
5 LIGHT FITTINGS
9 WATT SQUARE LED LIGHT(Energy +) 100.00 Nos.
Supply, fitting & fixing 9 Watt square light (LED) of approved color & size
including conceal type shade with other necessary accessories etc. all
complete up to testing & commissioning as per direction and full satisfaction
of Bank authority.
LED Panel light (Energy +) 4.00 Nos.
46 W rectengular shape LED Panel light(300mm*600mm), with 1 year brand
warranty,desigh as per approval of Bank authority.
SINGLE TUBE LIGHT SHADE (Transtec/Phillips) 5.00 Nos.
Supply, fitting & fixing single tube light (philips) shade with approved quality
with 1 no. 40 watts tube light, ballast (transtec), starter etc. all complete up
to testing & commissioning as per direction and full satisfaction of Bank
authority.
T5 TUBE LIGHT 140.00 rft
Supply, fitting & fixing T4 tube light with approved quality of required size. All
complete up to testing & commissioning as per direction and full satisfaction
of Bank authority.
SWITCH/ SWITCH STEEL BOX (Legrand)
Supply and installation (including screw, steel box and all other accessories
etc. all complete) of following switch and socket of approved quality.
6
5A, 3 Gang (1 way) switch (Legrand) 16.00 Pcs
20A DP Switch 2.00 Pcs
10A, 2pin socket (Legrand) 12.00 Pcs
13A, 3 pin socket (Legrand) 25.00 Pcs
Telephone socket 8.00 Pcs
Bell Push 8.00 Pcs
MK steel box (if required for LAN sockets) 40.00 Pcs
7 CEILING, WALL AND EXHAUST FAN
9OF10
SL Particulars Qty. Unit Rate Amount
WALL FAN(Mira Brand) 7.00 Pcs
Supply and installation of 220V, 50Hz imported wall moving fan of 20" dia
icluding all accessories etc. all complete up to testing & commissioning as per
direction and full satisfaction of Engineer in charge.(For Store, Vault & Pantry)
EXHAUST FAN
Supply and installation of axial flow single phase 230V, 50Hz A.C. wall
mounted exhaust fan of following sizes complete with frame and also
including cutting of required size hole in wall and mending good the damages
etc. all complete up to testing & commissioning as per direction and full
satisfaction of the Bank Authority.
10" dia (made of plastic for Pantry, toilet) 3.00 Nos.
20" dia industrial (for generator room) 1.00 Nos.
8 Calling Bell (Electric/Electronic, with remote) 1.00 Nos.
Burglar Alarm (5 Star Brand) including wiring with all other accessories all 1.00 Nos.
9 complete.
10 3 phase meter, Brand: Hosaf 1.00 Nos
11 Earthing Work 1.00 Job
Boring depth : 120ft. or more (till getting standard measurement)
Measurements in socket: Electrical Earthing from 0.01 volt to 0.9 volt, or E-N=below
0.5 ohm.
Copper Strip (4SWG wire) up to the MDB, Copper rod (4SWG) end of the strip (1
meter)
Total Electrical work =
10OF10
