LUG TYPE BUTTERFLY VALVE Z 014-A

TECHNICAL DATA T
Nominal diameter: DN 20 - DN 600 -
(DN 20 only PN10/16)

Face-to-face: EN 558 Series 20

-
ISO 5752 Series 20
API 609 Table 1

Flange accommodation: EN 1092 PN 6/10/16

ASME Class 150
AS 4087 PN 16
-
Flange Surface Design: EN 1092 Form A/B
ASME RF, FF

Top flange: EN ISO 5211 -

Marking: EN 19
-
Tightness check: EN 12266 (Leakage rate A)
ISO 5208, Category 3

Temperature range: -40°C to +200°C (depending on

pressure, medium and material)

Operating pressure: max. 16 bar

Lug type butterfly valve with threaded holes. This type enables the
one-sided lugging of pipes.

K
FEATURES -

- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results
in low operating torque and long service life and reliability
-
- Triple shaft bearings prevent shaft deflection and guarantee
optimum guidance even after many years of operating service
- Can be disassembled, material-specific recycling possible
- Single flange mounting is possible -
- Can be installed in any desired position
- Maintenance-free
- For paint and laquers, a silicone-free version is available -

-
GENERAL APPLICATIONS
F
- Chemical and petrochemical industries o
- Water and waste water technology
- Pneumatic materials handling technology
- Shipbuilding
- Power generation industry
- Food industry
- Civil engineering

Z 014-A 1.2
 LUG TYPE BUTTERFLY VALVE Z 014-A

ØF ØF

□G G
H1

H2
Optional shaft end:
A

Double flat acc. to

EN ISO 5211
C

Di
Ø

ØD

Z
B

E
Z 014-A with bare shaft end according to EN ISO 5211

Weight[kg]
Dimensions [mm]
(GG-25)
DN Size Splitted TS-
A B C D Di E F Flange G H1 H2 Z
[mm] [in] shaft shaft
20 ¾ 104 45 149 63 31,5 33 54 F04 11 12 19 - 2,1 -
25 1 104 45 149 63 31,5 33 54 F04 11 12 19 - 2,1 -
32 1¼ 104 50 154 68 31,5 33 54 F04 11 12 19 - 2,1 -
40 1½ 113 66 179 80 38 33 54 F04 11 12 19 22 4,0 -
50 2 126 84 210 95 48,5 43 54 F04 11 12 19 25 4,8 -
65 2½ 134 93 227 115 63,5 46 54 F04 11 12 19 45 5,5 -
80 3 157 104 261 138 78,5 46 65 F05 14 16 25 65 8,6 9,1
100 4 167 115 282 158 98,5 52 65 F05 14 16 25 85 9,8 10,4
125 5 180 127 307 188 123,5 56 65 F05 14 16 25 111 10,1 10,7
150 6 203 150 353 210 148 56 90 F07 17 19 30 139 13,1 14,6
200 8 228 176 404 268 199 60 90 F07 17 19 30 190 18,8 20,6
250 10 266 212 478 320 248 68 125 F10 22 24 39 240 29,5 32,5
300 12 291 237 528 370 296 78 125 F10 22 24 39 287 37,0 40,5
350 14 332 269 601 408 338 78 150 F12 * * - 330 54,8 60,4
400 16 363 314 677 470 388 102 150 F12 * * - 378 81,5 87,3
450 18 397 335 732 530 430,5 114 210 F16 * * - 417 101,4 105,9
500 20 437 371 808 574 494,5 127 210 F14/F16 * * - 474 136,3 142,8
600 24 498 469 967 675 590 154 300 F16/F25 * * - 563 240,5 267,5
* According to mounted actuator Subject to change without notice
 LUG TYPE BUTTERFLY VALVE Z 014-A

MATERIAL SPECIFICATION AND PARTS LIST

15
2
3 7

15
11

1
13 11
9

17

8 18
12

19
4
11
5
14
10
6 20
16
Pts. 17-20:
Cover plate for
TS-Version Version with splitted shaft valve ≥ DN 350

Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM
1 Body 9/10 Shafts
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 F
GGG-40.3 0.7043 X5/(X2)CrNiMo17-12-2 1.4401/1.4404 316
2 Seat Hastelloy 2.4883 Hastelloy
NBR Nitrile butadiene rubber 11 O-ring
EPDM Ethylene propylene diene monomer rubber NBR Nitrile butadiene rubber
CSM Chlorosulfonated polyethylene rubber FPM Fluorocarbon rubber
FPM Fluorocarbon rubber 12 TS-disc
VSI Silicon rubber Nodular Cast Iron GGG-40 0.7040 60-40-18
SBR-green Styrene butadiene rubber Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M
3/4 Bearing bush Aluminium Bronze G-CuAl10Ni 2.0975 C 95800
Brass MS 58 2.0401 B 45 Coating Halar, Rilsan
Polyamide PA 66 Surface qualtiy electropolished, mirror finished
PTFE Polytetrafluorethylene 13 TS-shaft
5 Seal DIN 7603 Stainless Steel X14CrMoS17 1.4104 430 F
Copper Cu Copper X39CrMo17-1 1.4122
6 Plug screw DIN 908 X5CrNiMo17-12-2 1.4401 316
Stainless Steel G-X5CrNiMo19-11-2 1.4408 CF8M 14 Sleeve
7 Plug screw DIN 915 Stainless Steel X5CrNi18-10 1.4301 304
Steel 45 H galvanized 15 O-ring
Stainless Steel A4-70 B8M NBR Nitrile butadiene rubber
8 Disc FPM Fluorocarbon rubber
Steel ST 52.3 1.0570 572-50 16 Retaining ring
Stainless Steel X5CrNi18-10 1.4301 304 Stainless Steel X39CrMo17-1 1.4122
G-X5CrNiMo19-11-2 1.4408 CF8M 17 O-ring
X2CrNiMo17-12-2 1.4404 316 L NBR Acrylonitrile butadiene rubber
X6CrNiMoTi17-12-2 1.4571 316 Ti 18 Shaft retainer
G-X2CrNiMoN26-7-4 1.4469 F 51 Brass MS 58 2.0401 B 45
Hastelloy 2.4883 Hastelloy 19 Cover plate
Aluminium Bronze G-CuAl10Ni 2.0975 C 95800 Grey Cast Iron GG-25 0.6025 40 B
Coating Halar, Rilsan, NBR, EPDM 20 Screw
Surface quality electropolished, mirror finished Steel 45 H galvanized
Stainless Steel A2-70 B8
A4-70 B8M
Other materials upon request
Subject to change without notice
 LUG TYPE BUTTERFLY VALVE Z 014-A

TORQUE Adapted Disc Size Pressure Rating

- The values listed in the table are DN Size
[mm] [in] 3 bar disc 6 bar disc 10 bar disc 16 bar disc
initial breakaway torques, taken
with liquids and lubricant media. 20 ¾ 5 5 5 -
25 1 5 5 5 -
- Please regard these as 32 1¼ 5 5 5 -
approximate values, as the
40 1½ 8 8 8 8
objective value depends on
different factors like pressure, 50 2 9 9 9 9
medium, rubber, quality, 65 2½ 18 18 18 18
temperature ... etc. 80 3 8 10 18 24
100 4 9 18 28 37
- Our engineers look forward to
help you with exact values for 125 5 15 22 45 59
your application. 150 6 36 45 78 125
200 8 59 76 140 200
- Powdery (non-lubricant) media
250 10 150 180 200 240
Md x 1,3
300 12 200 240 280 360
- Dry gases/high viscous media 350 14 350 540 610 700
Md x 1,2 400 16 420 620 750 850
450 18 720 746 860 1500
500 20 900 1100 2255 3690
600 24 1050 2100 3000 5830
All values in Nm

Kv-VALUES Opening angle α°

DN Size
- The Kv-values [m³ per hour] is [mm] [in] 20° 30° 40° 50° 60° 70° 80° 90°
the flow of water at a tempera-
ture of 5°C to 30°C (41°F to 20 ¾ - 3,46 5,95 7,97 9,7 11,2 12,8 14,5
86°F) at ∆p of 1 bar 25 1 - 3,53 7,33 11,5 15,8 20,0 24,0 27,3
32 1¼ - 2,56 7,97 15,5 24,2 33,0 40,8 46,6
- The Kv-values specified are 40 1½ 0,94 4,96 11,9 20,7 30,4 40,2 49,0 55,8
based on tests carried out by
the Delfter Hydraulics Laborato- 50 2 3,84 10,1 20,7 34,4 49,7 65,2 79,5 91,2
ries, the Netherlands 65 2½ 9,5 16,6 39,1 72,6 113 157 199 235
80 3 15,6 20,6 51,4 102 165 234 304 368
- Permissible velocity of flow 100 4 24,9 39,8 96,5 183 288 398 503 589
Vmax 4,5 m/s for liquids,
Vmax 70 m/s for gases 125 5 51,8 67,2 135 256 428 652 926 1250
150 6 76,5 97,3 197 375 629 957 1360 1830
- The throttle function is linear at 200 8 137 187 373 697 1160 1760 2510 3400
an angle 30° to 70° 250 10 227 271 563 1090 1850 2830 4010 5390
- Avoid cavitation 300 12 287 409 820 1550 2610 4050 5880 8120
350 14 399 488 1070 2110 3590 5480 7760 10400
For further values, please contact 400 16 557 703 1360 2600 4470 7060 10400 14600
our engineers. 450 18 716 907 1810 3440 5830 8980 13000 17800
500 20 875 1110 2250 4280 7180 10900 15500 20900
600 24 1230 1550 3150 6010 10090 15400 21800 29400
Subject to change without notice

www.ebro-armaturen.com
[email protected]

01.2019