Scribd
Upload
396 views

ESP32 Devkit Pinout - 19

This document provides a pinout diagram and description for the DOIT ESP32 DEVKIT V1 board. It identifies the functions of each pin including power supplies, communication protocols, sensors, and touch capabilities. Pins are numbered from 1 to 39 with descriptions of assigned functions such as I2C, SPI, UART, PWM, interrupts, and restrictions on certain GPIO pins. The board is designed for development with the ESP32 module.

Uploaded by

Humberto Roddhuer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
396 views

ESP32 Devkit Pinout - 19

This document provides a pinout diagram and description for the DOIT ESP32 DEVKIT V1 board. It identifies the functions of each pin including power supplies, communication protocols, sensors, and touch capabilities. Pins are numbered from 1 to 39 with descriptions of assigned functions such as I2C, SPI, UART, PWM, interrupts, and restrictions on certain GPIO pins. The board is designed for development with the ESP32 module.

Uploaded by

Humberto Roddhuer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

K

RESET ENABLE 18 18 GPIO 23 VSPI_MOSI HS1_STROBE 18


17 RTC_IO 0 ADC1_CH0 SENSOR_VP GPI- 36 17 17 GPIO 22 VSPI_WP SCL U0_RTS EMAC_TXD1 17
16 RTC_IO 3 ADC1_CH3 SENSOR_VN GPI- 39 16 16 GPIO 1 TX0 CLK_OUT3 EMAC_RXD2 16
15 RTC_IO 4 ADC1_CH6 VDET_1 GPI- 34 15 ESP-WROOM-32 15 GPIO 3 RX0 CLK_OUT2 15
14 RTC_IO 5 ADC1_CH7 VDET_2 GPI- 35 14 14 GPIO 21 VSPI_HD SDA EMAC_TX_EN 14
13 RTC_IO 9 TOUCH_9 ADC1_CH4 XTAL_32K_P GPIO 32 13 13 GPIO 19 VSPI_MISO U0_CTS EMAC_TXD0 13
12 RTC_IO 8 TOUCH_8 ADC1_CH5 XTAL_32K_N GPIO 33 12 12 GPIO 18 VSPI_CLK HS1_DATA8 12
11 EMAC_RXD0 RTC_IO 6 DAC_1 ADC2_CH8 GPIO 25 11 11 GPIO 5 VSPI_CS HS1_DATA6 EMAC_RX_CLK 11

10 EMAC_RXD1 RTC_IO 7 DAC_2 ADC2_CH9 GPIO 26 10 DOIT ESP32 DEVKIT V1 10 GPIO 17 TX2 HS1_DATA5 EMAC_CLK_180 10
9 EMAC_RX_DV RTC_IO 17 TOUCH_7 ADC2_CH7 GPIO 27 9 9 GPIO 16 RX2 HS1_DATA4 EMAC_CLK_OUT 9
8 HS2_CLK EMAC_TXD2 RTC_IO 16 TOUCH_6 ADC2_CH6 HSPI_CLK GPIO 14 8 8 GPIO 4 HSPI_HD ADC2_CH0 TOUCH_0 RTC_IO 10 EMAC_TX_ER HS2_DATA1 8
7 HS2_DATA2 EMAC_TXD3 RTC_IO 15 TOUCH_5 ADC2_CH5 HSPI_MISO GPIO 12 7 7 GPIO 2 HSPI_WP ADC2_CH2 TOUCH_1 RTC_IO 12 HS2_DATA0 7
6 HS2_DATA3 EMAC_RX_ER RTC_IO 14 TOUCH_4 ADC2_CH4 HSPI_MOSI GPIO 13 6 6 GPIO 15 HSPI_CS ADC2_CH3 TOUCH_2 RTC_IO 13 EMAC_RXD3 HS2_CMD 6
5 U1_RXD HS1_DATA2 SPI_HD SD2 GPIO 9 5 5 GPIO 0 ADC2_CH1 CLK_OUT1 EMAC_TX_CLK 5

AMS1117
4 U1_TXD HS1_DATA3 SPI_WP SD3 GPIO 10 4 CP2102 4 GPIO 8 SD1 SPI_MOSI HS1_DATA1 U2_CTS 4
3 U1_RTS HS1_CMD CMD GPIO 11 3 3 GPIO 7 SD0 SPI_MISO HS1_DATA0 U2_RTS 3
GND 2 2 GPIO 6 CLK SPI_CLK HS1_CLK U1_CTS 2

VIN 1 1 3.3V

BOOT
EN
• All GPIOs support PWM and interrupts
• GPIOs 34 - 39 are input only
• Do not use GPIOs 6 - 11

DOIT ESP32 DEVKIT V1 PINOUT


Board layout design is for illustrative purpose only. It may vary depending on the manufacturer.
Pin assignments are as per ESP32 Technical Reference Manual version 3.1

Revision 12, 23-04-2018

www.vishnumaiea.in

You might also like