LE50H6500
Contents
1.General Specification
2.Function Introduce
3.Factory Mode Adjustment
4.Hotel mode
5.Software Update
6.TV Unit Disassemble
7.System Block Diagram
8.Trouble Shooting
Factory Mode Adjustment
1.How to enter into Service Mode
The way to the factory mode menu:
Step 1: Press Menu,
Step 2: Input “8893”,
System will be into the factory mode menu when 2 steps above are done.
Into Version of the main factory menu, you can see the edition of the software,
like this"BUILD TIME 2014-02-28 16:35:37”.
2.How to exit
If you want to exit this factory menu, please press the button ”Exit” on the
remote. system will be out the factory mode menu.
Factory Mode Adjustment
3. Home Page of Factory Manu
0） Init TV：factroy reset，all the parameters
return to original state.
1） ADC Adjust：Colour Adjust(see caption 1)
2） Picture：Picture Mode（see caption 2）
3） Sound：Sound Mode（see caption 3）
4） Genneral：General Setting，Dimmer Method、
Backlight、LCN and so on（see caption 4）
5） Debug（see caption 5）
6） EMC：Authentication parameter（see
caption 6）
7） System Info：system parameter（see caption
7）
8） Upgrade：software update（see caption 8）
Main board：Currently used board
Checksum：program number
Build Time：program compile time
Factory Mode Adjustment
4. ADC Adjust White Balance Autocorrection
Factory Mode Adjustment
5. Pircture Mode
0） Standard Setting:Contrast, Brightness and other
settings. (see 2.1)
1） White Balance:White Balance Setting (see 2.2)
2） Nonlinear_curve: Contrast and Brightness
curve ,and other settings（see 2.3）
3） Luma_other: unusual, there are defaults already
in.
4） Color setting:unusual, there are defaults already
in.
5） Peaking Setting: unusual, there are defaults
already in.
6） NR Setting: unusual, there are defaults already in.
7） CTI Setting: unusual, there are defaults already in.
8） VIP: unusual, there are defaults already in.
9） Gamma: unusual, there are defaults already in.
10）DLC: unusual, there are defaults already in.
Factory Mode Adjustment
5.1 Standard Setting: Contrast, Brightness,
chroma, saturation, and sharpness setting. you
can choose Picture Mode setting by mode.
Factory Mode Adjustment
5.2 White Balance Adjust 5.3 Brightness, contrast and other curve
adjust
Factory Mode Adjustment
6. Sound Mode
0）Sound Mode: Bass，EQ adjust
1）Volume Curve: Sound curve
2）Audio Adjust: Only for Developer
3）Audio AVC:Only for Developer
Factory Mode Adjustment
7. General settings
0）Dimming Method Swith（200KHz is ADJ）
1）Backlight value
2）LCN swith
3）To decide whether the PVR will record as TS
stream.
4）Internal test patten
5）Aging mode
Factory Mode Adjustment
8. Debug
0） Only for deverloper
1） Map adjust
2） Only for deverloper
3） Reproductionratio adjust
4） Only for deverloper
5） Only for deverloper
6） Only for deverloper
Factory Mode Adjustment
9. EMC Authentication parameter adjust
（only for authentication）
Factory Mode Adjustment
10. System Information（There is no item
needed to be adjusted, which only for
displaying some system parameter）
Factory Mode Adjustment
11. Factory Upgrade
0） Upgrade TV：Upgrade entries
1）Upgrade file name：The name of the file
that need to be upgrated.
Software Update
1.USB upgrade procedura
Copiare nella memoria USB il
software, inserire la memoria USB
nell’ingresso USB del tv.
Premere il tasto "MENU" e
selezionare " Software Update(USB)
", e premere "OK".
Selezionare "Yes", il TV inizia
l’aggiornamento.
Nota: Non togliere alimentazione
durante l’ aggiornamento !!
H6500 SW upgrade
• MSD308B upgrade
– Assure TV is completely off by removing power cable from AC plug
– Copy CVT_308B.bin file to USB device
– Insert USB device to TV
– Power on TV by plugging AC cable
– LED will blink during upgrading process
– When upgrade is completed, LED will switch off
• 6M40 upgrade
– Assure TV is completely off by removing power cable from AC plug
– Copy 6M40.bin file to USB device
– Insert USB device to TV
– Power on TV by plugging AC cable
– LED will blink during upgrading process
– Upgrade is completed after 5 minutes.
– Remove USB device and switch off/on TV by AC plug
TV Unit Disassemble
1. Remove the Stand 2. Remove the Back Cabinet
1. Lay down the TV set . 1.Remove the thirty-two screws indicated
2. Remove the four screws from the with red circles.
stand whichin the picture above. 2. Flip machine, panel side up.
3. Remove the stand. 3.Carefully raise the Front shell from
bottom.
TV Unit Disassemble
3. Remove the Power Supply Module 3. Remove the Mainboard
1. Remove the four screws indicated with 1. Remove the eight screws indicated with
red circles. red circles.
2. Remove the Power Supply Module. 2. Remove the Mainbord.
TV Unit Disassemble
4. Remove the Remote Control Board
1. Remove the screw indicated with red circles.
2. Remove the Remote Control Board.
LE50H6500
LE50H6500 Troubleshooting
Power Board T-Con Board Main Board
LE50H6500 Power Troubleshooting
Stand by 5V
LE50H6500 Power Troubleshooting
Power ON
LE50H6500 Power Troubleshooting
12 V
LE50H6500 Power Troubleshooting
Power Board
5 V Stand by
Power ON
5V
5V
12V
LE50H6500 Power Troubleshooting
Audio
LE50H6500 Power Troubleshooting
IR
LE50H6500 Power Troubleshooting
LVDS VCC
LE50H6500 Power Troubleshooting
BL ON
LE50H6500 Led Driver Troubleshooting
Led cable connected
LE50H6500 Led Driver Troubleshooting
Led cable disconnected
LE39M7000CF
Contents
1.General Specification
2.Function Introduce
3.Factory Mode Adjustment
4.Hotel mode
5.Software Update
6.TV Unit Disassemble
7.System Block Diagram
8.Trouble Shooting
Factory Mode Adjustment
1.How to enter into Service Mode
The way to the factory mode menu:
Step 1: Press Menu,
Step 2: Input “8893”,
System will be into the factory mode menu when 2 steps above are done.
Into Version of the main factory menu, you can see the edition of the software,
like this"BUILD TIME 2013-08-23 16:35:37
Kernel Version SVN794 ”.
2.How to exit
If you want to exit this factory menu, please press the button ”Exit” on the
remote. system will be out the factory mode menu.
Factory Mode Adjustment
3. Measurements and Adjustments
1.The Main Menu
In factory mode menu,press up/down
button to choose the up/down item,press
right or OK button to the submenu.press
MENU button to go back.
Factory Mode Adjustment
2. Picture Mode:Adjust the Picture
Mode,Picture Curve:
1)Brightness;
2)Contrast;
3)Sharpness;
4)Color;
5)Tint
Factory Mode Adjustment
3. ColorTmp Mode:Adjust the ColorTmp Mode,
White Balance :
1)R Gain;
2)G Gain;
3)B Gain;
4)R Offset;
5)G Offset;
6)B Offset;
7)Gamma Table.
Factory Mode Adjustment
4. Audio Mode:Adjust the values of Audio
Mode,
1)Treble;
2)Bass.
Factory Mode Adjustment
5. Misc
1)Burn In;
2)IF AGC;
3)IF AGC_L;
4)ATS;
5)WSS;
6)DTG Scan;
7)ADC White Balance;
8)Auto Power On;
9)Back Light;
10)LCN Switch;
11)AGC Mode.
Factory Mode Adjustment
6. Version:Used to view detailed information
of the software, including:
1) Build Time;
2) Kernel Version;
3) BootRom Version;
4) 8051Rom Version;
5) AudioRom Version;
6)Customer SW Version;
7)HDCP Key;
8) CI Key.
Hotel mode
To enter hotel menu: “Menu-1-0-0-1“
To exit Hotel Menu: Press the key "exit“
Hotel lock : Set Hotel mode on/off.
Lock channel :Lock the channel which you want.
Set source:Set to the default source.
Dtv Channel Number :Set to the default channel of the
DTV source.
Atv Channel Number :Set to the default channel of the
ATV source.
Picture Lock :Lock the picture.
Key Lock :Lock the keyboard.
Max Volume :Set max volume limited,this option
allows you to set the max volume level.
Source Lock :Lock the source menu.
Backup to USB : Backup hotel settings to USB device.
Restore from USB :Restore hotel settings from USB
device.
Clear Lock :Clear all lock.
Standby Light Power :Select the status of power on.
Software Update
1.USB upgrade procedura ATTENZIONE Per aggiornare il
Copiare nella memoria USB il software, Firmware del tv usare solo
inserire la memoria USB nell’ingresso
questo ingresso USB
USB evidenziato in verde del tv.
YES NO
Software Update
2 Premere il tasto "MENU" e selezionare
" Software Update(USB) ", e premere
"OK".
Selezionare "Yes", il TV inizia
l’aggiornamento.
Il tv si spegnerà automaticamante alla
fine dell’ aggiornamento.
Nota: Non togliere alimentazione
durante l’ aggiornamento !!
TV Unit Disassemble
1. Remove the Stand 2. Remove the Back Cabinet
1. Lay down the TV set . 1.Remove the twenty-one screws indicated
2. Remove the four screws from the with red circles.
stand whichin the picture above. 2. Flip machine, panel side up.
3. Remove the stand. 3.Carefully raise the Front shell from
bottom.
TV Unit Disassemble
3. Remove the Mainboard 4. Remove the Power Supply Module
1. Remove the six screws indicated with 1. Remove the four screws indicated with
red circles. red circles.
2. Remove the Mainbord. 2. Remove the Power Supply Module.
TV Unit Disassemble
5. Remove the Remote Control Board
1. Remove the screw indicated with red circles.
2. Remove the Remote Control Board.
LE39M7000CF
LE39M7000CF Troubleshooting
Power Board Main Board Dongle Board
LE39M7000CF Power Troubleshooting
Stand by 5V
LE39M7000CF Power Troubleshooting
Power ON
LE39M7000CF Power Troubleshooting
12 V
LE39M7000CF Power Troubleshooting
Power Board
5 V Stand by
Power ON
5V
5V
12V
12V
LE39M7000CF Power Troubleshooting
Audio
LE39M7000CF Power Troubleshooting
BL ON
LE39M7000CF Power Troubleshooting
Dongle 12 V
LE39M7000CF Power Troubleshooting
IR
LE39M7000CF Power Troubleshooting
LVDS VCC
LE39M7000CF Led Driver Troubleshooting
Led cable connected
LE39M7000CF Led Driver Troubleshooting
Led cable disconnected
LE32B7000C
Contents
1.General Specification
2.Function Introduce
3.Factory Mode Adjustment
4.Hotel mode
5.Software Update
6.TV Unit Disassemble
7.System Block Diagram
8.Trouble Shooting
Factory Mode Adjustment
1.How to enter into Service Mode
The way to the factory mode menu:
Step 1: Press Menu,
Step 2: Input “8893”,
System will be into the factory mode menu when 2 steps above are done.
Into Version of the main factory menu, you can see the edition of the software,
like this"BUILD TIME 2013-08-23 16:35:37
Kernel Version SVN794 ”.
2.How to exit
If you want to exit this factory menu, please press the button ”Exit” on the
remote. system will be out the factory mode menu.
Factory Mode Adjustment
3. Measurements and Adjustments
1.The Main Menu
In factory mode menu,press up/down
button to choose the up/down item,press
right or OK button to the submenu.press
MENU button to go back.
Factory Mode Adjustment
2. Picture Mode:Adjust the Picture
Mode,Picture Curve:
1)Brightness;
2)Contrast;
3)Sharpness;
4)Color;
5)Tint
Factory Mode Adjustment
3. ColorTmp Mode:Adjust the ColorTmp Mode,
White Balance :
1)R Gain;
2)G Gain;
3)B Gain;
4)R Offset;
5)G Offset;
6)B Offset;
7)Gamma Table.
Factory Mode Adjustment
4. Audio Mode:Adjust the values of Audio
Mode,
1)Treble;
2)Bass.
Factory Mode Adjustment
5. Misc
1)Burn In;
2)IF AGC;
3)IF AGC_L;
4)ATS;
5)WSS;
6)DTG Scan;
7)ADC White Balance;
8)Auto Power On;
9)Back Light;
10)LCN Switch;
11)AGC Mode.
Factory Mode Adjustment
6. Version:Used to view detailed information
of the software, including:
1) Build Time;
2) Kernel Version;
3) BootRom Version;
4) 8051Rom Version;
5) AudioRom Version;
6)Customer SW Version;
7)HDCP Key;
8) CI Key.
Hotel mode
To enter hotel menu: “Menu-1-0-0-1“
To exit Hotel Menu: Press the key "exit“
Hotel lock : Set Hotel mode on/off.
Lock channel :Lock the channel which you want.
Set source:Set to the default source.
Dtv Channel Number :Set to the default channel of
the DTV source.
Atv Channel Number :Set to the default channel of
the ATV source.
Picture Lock :Lock the picture.
Key Lock :Lock the keyboard.
Max Volume :Set max volume limited,this option
allows you to set the max volume level.
Source Lock :Lock the source menu.
Backup to USB : Backup hotel settings to USB device.
Restore from USB :Restore hotel settings from USB
device.
Clear Lock :Clear all lock.
Standby Light Power :Select the status of power on.
Software Update
1.USB upgrade procedura
Copiare nella memoria USB il software,
inserire la memoria USB nell’ingresso
USB del tv.
2. Premere il tasto "MENU" e selezionare
" Software Update(USB) ", e premere
"OK".
Selezionare "Yes", il TV inizia
l’aggiornamento.
Il tv si spegnerà automaticamante alla
fine dell’ aggiornamento.
Nota: Non togliere alimentazione
durante l’ aggiornamento !!
B7000 - SW upgrade
– Assure TV is completely off by removing power cable from AC
plug
– Copy SISEU23X8M.bin file to USB device
– Insert USB device to TV
– Power on TV by plugging AC cable
– LED will blink slowly during upgrading process
– When upgrade is completed, LED will blink faster
– Remove power from TV and remove USB device
TV Unit Disassemble
1. Remove the Stand 2. Remove the Back Cabinet
1. Lay down the TV set . 1.Remove the twelve screws indicated with
2. Remove the four screws from the red circles.
stand whichin the picture above. 2. Flip machine, panel side up.
3. Remove the stand. 3.Carefully raise the Front shell from
bottom.
TV Unit Disassemble
3. Remove the Mainboard and Power Supply Module
1. Remove the four screws indicated with red circles.
2. Remove the Mainbord.
TV Unit Disassemble
4. Remove the Remote Control Board
1. Remove the screw indicated with red circles.
2. Remove the Remote Control Board.
LE32B7000C
LE32B7000C Power Troubleshooting
Step A
Step B
Step C.1
Step C.2
Step C.3
LE32B7000C Power Troubleshooting Step A
Step A
Pin 1
LE32B7000C Power Troubleshooting
Step A
Step B
Step C.1
Step C.2
Step C.3
LE32B7000C Power Troubleshooting Step B
Step B
CD29
LE32B7000C Power Troubleshooting
Step A
Step B
Step C.1
Step C.2
Step C.3
LE32B7000C Power Troubleshooting Step C.1
Step C.1
UL1
LE32B7000C Power Troubleshooting Step C.2
Step C.2
UD41
LE32B7000C Power Troubleshooting Step C.3
Step C.3
UL61
LE32B7000C Display Troubleshooting
LE32B7000C Display Troubleshooting
LE32B7000C Led Driver Troubleshooting
Led cable connected
LE32B7000C Led Driver Troubleshooting
Led cable disconnected
SIS231 Basic Training
LE22G690CF
Contents
1. General Specification
2.Disassemble and Assemble
3. Factory Mode adjustment
4. Software update
5. Hotel Mode instruction
6. Trouble shooting
The whole overview
Front view
led indicator and remote receiver window
The whole overview
• Rear view
1. General Specification
1.1 The specification of LE22G690CF
Picture
Screen size 21.5"
Panel Brand TIANLE
Purpose TV/Monitor Optional
Aspect ratio 16:9
Max. Resolution 1920x 1080
Contrast Ratio 1000:1
Brightness 200(Typ.)cd/m2
Pixel Pitch (mm) 0.18175(H) × 0.18175(V)
Display Colors 16.7M
Viewing Angle(H/V ) 160/150
Response Time (ms) 5
1. General Specification
Reception
Chassis SIS231
TV system PAL BG/DK/I SECAM BG/DK
Tuning system FST
Antenna impedance VHF/CATV/UHF 75Ω unbalanced
Sound
Bass YES
Treble YES
Balance YES
Speakers 2
Audio power 2×3W
1. General Specification
Connection jack
RF TV/CATV 75ohms coaxial × 1
AV YES ×1
Mini YPbPr YES×1
PC In VGA 15Pin × 1
HDMI YES× 1
AV(L/R) , share with Mini YPbPr
Audio In
PC audio ×1
SPDIF× 1
Audio Out
Earphone × 1
SCART YES×1
USB USB× 1(For Upgrade /Multi Media/DTV PVR )
1. General Specification
Other features
Last Channel recall YES
Automatic tuning YES
Off Timer YES
Sleep timer YES
OSD Menu Multi Language
Audio mute YES
TEXT YES
NICAM YES
Power supply AC 100V～240V 50Hz/60Hz
Max power consumption <75W
1. General Specification
1.2 Function Introduces
That product is digital & analogue TV board, can receive the
PAL/SECAM analogue television and digital television, It is
applicable to include Europe (include UK), Australia etc. with single
common interface (CI/CI plus), match with the CAM card can
decrypt the program which is encrypt with Irdeto, Viaccess, Conax
etc. modes.
1.3 Location of Controls and Components
1.3.1 Board Location
MAIN-BOARD
BACKLIGHT DRIVE
BOARD
1.3.3 Remote Control
Model: HTR-A18E
Custom Code: 04FBH
Code Type: NEC
2.1 Disassemble
2.1.1 Remove the three screws as below picture
2.1.2 Remove the 3 screws
2.1.3 Remove the 4 screws on the back cabinet
2.1.4 Remove the 6 screws fixing the back cabinet.
2.1.5 Remove the 3 screws fixing the power board.
2.1.6 Remove 2 screws for Backlight Drive Board, show as follow
2.1.7 Remove 2 screws for keyboard, show as follow
2.1.8 Remove remote board, show as follow
4. Software update
1.USB upgrade procedura con menù di
fabbrica
Rinominare il file in SISEU23X8M.bin
e copiarlo nella root della memoria USB,
inserire la memoria USB nell’ingresso USB
del tv.
2. Premere il tasto "MENU 8893"
3. selezionare " Update ", e premere "OK".
Nota: Non togliere alimentazione durante l’
aggiornamento !!
4. Software update
LE22G690CF
LE22G690CF Troubleshooting
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
12 V
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
5V
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
Power ON
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
3,3 V Stby
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
3,3 V
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
3V3 M
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
1,5 V
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
1V
LE22G690CF Power Troubleshooting – Blank Screen or show nothing
Audio
UA1 Pin7
LE22G690CF Troubleshooting
LE22G690CF LVDS Troubleshooting – White screen
LVDS VCC
LE22G690CF Led Driver Troubleshooting
To Driver Board
GND
ADJ DIM
BL ON
12V
LE22G690CF Led Driver Troubleshooting
12 V
LE22G690CF Led Driver Troubleshooting
BL ON
LE22G690CF Led Driver Troubleshooting
Led cable connected
LE22G690CF Led Driver Troubleshooting
Led cable disconnected
Grazie dell’Attenzione
