BS-EN54-2
BS-EN54-4
KM 73505
SIGMA CP
Conventional Fire Alarm Control Panel
Features
Fully programmable using simple menu options
Two-wire and standard versions in two, four or eight
Adjustable sounder delay time
zones
Sounder configuration options
Compatible for use on BS5839: Part 1: 2017
Zonal sounder delay detectors only
installations
Zonal sounder delay call points only
Two-wire repeaters and ancillary boards
Coincidence input selection
Simple, single board construction Barrier selection by zone
I.S
Compatible with wide range of detection devices
Short circuit fire by zone
Two monitored sounder outputs
Non latching zones
Three Amp power supply
Silent zones
Auxiliary power output
Zone input delay
Fully certified to BS EN54-2 and BS EN54-4
•
General panel configuration
Description
The Sigma CP range of conventional fire control panels are designed for
the most demanding of conventional fire detection and alarm system
applications.
Easy to install, the Sigma CP is available with two, four or eight detection
zones in standard or installation saving, ‘two wire’ versions. The extensive
range of configuration features available ensure suitability for new
installations or panel replacements on older systems.
Configuration options are stored in non-volatile memory and are easily
accessed via an intuitive user interface, which enables the configuration
data to be viewed and changed efficiently.
Sigma CP control panels are compatible with most standard, conventional
detectors, call points and sounders and are also compatible with ‘two wire’
detector bases from Apollo and Hochiki.
Panels
LCMU Standby
Product Code Description Alarm Current Size (mm)
Included Current
K11020M2 2 zone, 4 wire panel No 0.065 Amps 0.1 Amps 385 x 310 x 90
K11040M2 4 zone, 4 wire panel No 0.075 Amps 0.21 Amps 385 x 310 x 90
K11080M2 8 zone, 4 wire panel No 0.093 Amps 0.55 Amps 385 x 310 x 90
KL11020M2 2 zone, 4 wire panel Yes 0.065 Amps 0.1 Amps 385 x 310 x 90
KL11040M2 4 zone, 4 wire panel Yes 0.075 Amps 0.21 Amps 385 x 310 x 90
KL11080M2 8 zone, 4 wire panel Yes 0.093 Amps 0.55 Amps 385 x 310 x 90
T11020M2 2 zone, 2 wire panel N/A 0.065 Amps 0.15 Amps 385 x 310 x 90
T11040M2 4 zone, 2 wire panel N/A 0.075 Amps 0.3 Amps 385 x 310 x 90
T11080M2 8 zone, 2 wire panel N/A 0.093 Amps 0.63 Amps 385 x 310 x 90
Tamper resisant vision
K18002 N/A N/A N/A 385 x 310 x 90
window*
For further information visit www.kentec.co.uk
Specification
Construction 1.2mm mild sheet steel
IP Rating IP30
Finish Epoxy powder coated
Colour - lid & box BS 00 A 05 grey - fine texture
Colour - control panel & labels RAL 7047 light grey - satin
Weight 6kg
Supply Voltage 230V AC (+10%/-15%)
Mains supply fuse 1.6 Amp 250V
Power supply DC rating 24V 3 Amps
Maximum battery size 7Ah 12V (2 per panel)
Fault contract rating 30V DC 1 Amp
Local fire contract rating 30V DC 1 Amp
Fire contract rating 30V DC 1 Amp
Sounder output rating 0.5A per output (max 1.6A over all outputs)
Detection zone current 1.6 milliamps
Detection zone EOL resistor 6k8 5%
Active EOL K14606K (optional)
Sounder output EOL resistor 10k 5%
Cable capacity 2.5mm² per terminal
Operating temperature -5°C to +40°C
Operating humidity <95% (non condensing)
90 385
Zone Chart General System Status Fire In Zone
Fire Power Fault
1 2 3 4
1 Power On Sounder Fault/
Disablement
Zone Fault/Test/Disablement System Mode
2
Delay On General Fault
Fire In Zone
3
310
Test Mode On System Fault
4 5 6 7 8
General Alarm/Fault
Disablement Warning Silenced
5 Zone Fault/Test/Disablement Enable Control
6
Silence/Sound Alarm/Fault Reset Lamp Mode Select Enter
7 Alarm Warning Silence Test (+10) (+1)
Fire Alarm Control
Model: K11080M2
Made in U.K.
EN54-2: 1997 + A1: 2006
EN54-4: 1997 + A1: 2002 + A2: 2006 KM 73505
Datasheet DS37/17/17
For further information visit www.kentec.co.uk
Kentec Electronics Ltd. reserves the right to alter the specification of its products from time to time without notice.
Although every effort has been made to ensure the accuracy of the information contained in this document it is not
warranted or represented by Kentec Electronics Ltd. to be a complete and up-to-date description.
