Scribd
Upload
656 views3 pages

IKA MK 2000 Colloid Mill Overview

The IKA MK 2000 colloid mill is capable of wet and fine milling of tough materials to produce colloidal solutions, emulsions, and suspensions. It allows for continuous processing with a narrow particle size distribution in a single pass. The conical milling tools can be adjusted to control the milling gap and dispersing effect for different raw materials. The colloid mill is available in sizes to process flow rates from 200 to 80,000 liters per hour.

Uploaded by

kiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
656 views3 pages

IKA MK 2000 Colloid Mill Overview

The IKA MK 2000 colloid mill is capable of wet and fine milling of tough materials to produce colloidal solutions, emulsions, and suspensions. It allows for continuous processing with a narrow particle size distribution in a single pass. The conical milling tools can be adjusted to control the milling gap and dispersing effect for different raw materials. The colloid mill is available in sizes to process flow rates from 200 to 80,000 liters per hour.

Uploaded by

kiran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Colloid Mill MK 2000/10

/// Data Sheet

The IKA MK 2000 is a high-performance inline colloid mill capable of performing wet and fine milling of tough and grainy
raw materials. The MK 2000 is especially suitable for the production of colloidal solutions or extremely fine emulsions
and suspensions. Excellent dispersing performance allows the IKA Colloid Mill MK 2000 to be used for continuous
processes, providing a narrow distribution range of ground particles in a single pass. For challenging milling tasks the
colloid mill can be installed into a recirculation loop with a working vessel by means of tube connections.

For optimum adaptation of the machine to the process it can be equipped with different milling tools. The spiral geared
as well as cross geared tools are available.

[Link]
Subject to technical changes
The conical geometry of the milling tools enables an axial displacement of the stator for an infinite adjustment of the
milling gap. This allows influencing the dispersing effect, particularly regarding tasks with variable raw materials.

As neither the rotor nor the stator is slotted throughout, the probability of particles passing through the generator
untreated is negligibly small. These collective features enable the IKA Colloid Mill MK to achieve the finest particle size
reduction, thereby contending with a high pressure homogenizer by attaining similar dispersing results at higher flow
rates.

The IKA Colloid Mill MK 2000 is available in seven different sizes, with varied possible throughput from 200 to 80.000
l/h. All machine sizes can work with the same circumferential rotor speed, which ensures reliable scale-up.

[Link]
Subject to technical changes
Technical Data
Flow rate (max.) 7500 l/h
Viscosity (max.) 50000 mPas
Motor power 15 kW
Motor power EExe.. 15 kW
Rotor rotational speed 4200 rpm
Tip speed 23 m/s
Speed regulation possible yes
Single mechanical seal yes
Double mechanical seal yes
Process pressure (max.) 16 bar
Process temperature 120 °C
Flame proof possible yes
Dispersing tool variable
Cleaning yes CIP
Sterilisation yes SIP
Weight approx. 250 kg

[Link]
Subject to technical changes

You might also like