MediaKind

RX8200
The RX8200 Advanced Modular Receiver is the
world’s bestselling IRD. Now with DVB-S2X and
HEVC upgradeability it is also the most
future-proof.
Broadcasters need to deploy receivers for many
different tasks in many different operational
circumstances. MediaKind’s RX8200 receiver
offers ultimate operational flexibility by
providing capability for decoding of all video
formats, all video compression formats and
total connectivity for all transmission mediums
via a comprehensive choice of options.

The RX8200 offers the ultimate in compression

efficiency. RX8200 now provides HEVC decode
capability. And for satellite operators RX8200
offers up to 20% bandwidth efficiency gains
through full support of the new DVB-S2X
international open standard. Combined, these
two new technologies offer a step-change in
transmission efficiency enabling Operators to
dramatically reduce operational costs or free-
up bandwidth to launch new revenue
generating services.

[Link]
 Product Overview
Ultimate Efficiency
The RX8200 Advanced Modular Receiver offers ultimate bandwidth efficiency for satellite transmissions by incorporating the option for the new
DVB-S2 Extensions (DVB-S2X) standard. DVB-S2X offers up to 20% bit rate efficiency for typical video applications.

Multi-format Decoding - Including HEVC

As a true multi-format decoder, the RX8200 can offer MPEG-4 AVC [Link] and [Link] High Definition decoding in all industry-standard compression
formats, including HEVC. By using HEVC compression, combined with DVB-S2X (for satellite applications), Operators can benefit from a step-
change in transmission efficiency.

Content Security and Traceability

The RX8200 protects content to the fullest extent by combining secure, smart-card-less conditional access functionality with forensic
watermarking capability to uniquely and imperceptibly mark decoded content - allowing any down-stream leaked content to be traced back to
source.

Total Connectivity
The RX8200 Advanced Modular Receiver offers the user total connectivity through the capability to provide satellite, ASI and IP transport stream
inputs - including the latest SMPTE 2022-7 Seamless Switching technology, all within a single unit. With this flexibility the user is confident that
their initial receiver investment is capable of adapting to a fast changing industry.

Highest Quality
The RX8200 has the capability to provide the ultimate feature-set of MPEG-4 HD, [Link] 10-bit 1080p50/60 allowing broadcasters to achieve the
highest possible video quality.

Lowest Latency
Broadcasters are increasingly demanding lowest latency for contribution applications. MediaKind offers the complete low latency suite of tools for
the user – whether that be high quality MPEG-4 decoding or the latest HEVC compression modes for optimal efficiency for satellite applications.

Why MediaKind
The MediaKind RX8200 heads its class as an IRD offering the perfect balance of industry leading capability, flexibility and affordability.

Base Unit Features

Chassis: (RX8200/BAS/B) RX8200 can be equipped with the following capability via additional
Value Packs:
Base Value Pack: (RX8200/SWO/VP/BASE)
• MPEG-2, MPEG-4 and HEVC [Link] SD/HD decode capability
• Easy to use Dashboard web interface • MPEG-2 [Link], MPEG-4 and HEVC [Link] SD/HD capability
• 1x ASI input transport stream input
• Frame Sync input A comprehensive range of input options is also available including
• BISS, BISS 2, Common Interface & MediaKind Director latest DVB-S2X satellite inputs, OFDM DVB-T and T2 and IP
descrambling interfacing.
MediaKind RAS descrambling
•
• SD & HD Video output interfaces
Connectivity Options
• Single service filtering The RX8200 Advanced Modular Receiver has a single ASI input as
• 2x Stereo pairs of physical audio connections standard and can be configured with additional inputs.
• Dolby Digital® decoding and pass-through IP Transport Stream Input/Output Options
• Alarm relay and SCTE 35 controlled contact closures for
ad-insertion signaling The RX8200 may be configured with IP transport stream input and

MediaKind RX8200 | 10-2019-v32 2 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
 output connectivity via the following options. (RX8200/HWO/S2/2/B)
• 4x L-band inputs
IP Transport Stream Input/Output • DVB-S QPSK demodulation included
(RX8200/HWO/IP/I/O/B) • DVB-S2 QPSK, 8PSK demodulation included
• DVB-S and DVB-S2 low symbol rate capability included
IP Transport Stream Input/Output • Multiple (x3) PL scrambling/Gold Code search
(RX8200/HWO/IP/I/O/B) • DVB-S2 16APSK & 32APSK demodulation with additional Value
Pack
• IP transport stream output capability
• IP transport stream input capability with additional Value Pack DVB-S2 Higher Order Modulation Value Pack
• 2x Gigabit Ethernet RJ-45 interfaces capability (RX8200/SWO/VP/S2/HOM)
• Encapsulation of transport stream on IP multicast • Adds DVB-S2 16APSK and 32APSK capability to S2 satellite input
• Includes single service filtering on single SPTS IP output option card
• Remap outgoing PIDs when service filtering DVB-T/T2 Input Option
• Includes SMPTE 2022M Pro-MPEG FEC capability for IP output
The RX8200 may be configured with an input to allow reception of
• Includes MPE based data de-encapsulation of IP data DVB-T and DVB-T2 digital terrestrial signals.
• Multiple SPTS output stream with Multi-service Filtering Value
DVB-T/T2 Input (RX8200/HWO/OFDM/B)
Pack
• 1x UHF/VHF input
IP Transport Stream Input Value Pack
• 6MHz, 7MHz and 8MHz input bandwidth
RX8200/SWO/VP/IP/IN) • DVB-T demodulation
• Enables IP transport stream input for IP In/out card • DVB-T2 demodulation capability
• MPEG transport stream Input over IP • Dual PLPs
• 2x 100/1000BaseT input
G.703 ATM Input Option
• Very low latency
The RX8200 may be configured with G.703 ATM connectivity.
• SMPTE 2022M Pro-MPEG FEC capability included
G703 ATM Input (RX8200/HWO/G703/B)
IP Transport Stream Input with Seamless Switching Value Pack • E3 or DS-3 inputs
RX8200/SWO/VP/IP/SEAMLESS) • 34 Mbps or 45 Mbps rates
• Enables SMPTE 2022-7 Seamless Switching on IP input Input Redundancy
• Includes all other functionality as RX8200/SWO/VP/VP/IP/IN The RX8200 Advanced Modular Receiver offers as standard automatic
redundancy switching between ASI input and the additional input
Satellite Input Options option.
MediaKind offers capability for all satellite transmission standards
including the new DVB-S2X international open standard which can Remote Control Options
deliver up to 20% efficiency gains over DVB-S2.
The RX8200 can be further enhanced by remote control capabilities.
DVB-S2X Satellite Input
(RX8200/HWO/S2X/B)* RS232 Remote Control and Data
(RX8200/HWO/RS232/B)
• 4x L-band inputs
• DVB-S QPSK demodulation • RS232 remote control - Alteia protocol
• DVB-S2 QPSK, 8PSK • RS232 data output
• DVB-S2X QPSK, 8PSK, 16PSK demodulation Conditional Access Options
• Low symbol rate capability
The RX8200 supports many types of widely used conditional access
• Rolloffs down to 5%
systems to allow for secure transmission of content. By default the
• Multiple (x3) PL scrambling/Gold Code search RX8200 is fitted with the capability to accept Conditional Access
• DVB-S2 32APSK demodulation with additional Value Pack Modules and comes pre-enabled for all frequently used single service
*Upgrades may require RX8200/UPS/VP/BASE CA systems. Additionally, the RX8200 may be ordered with the
Higher Order Modulation Value Packs. enhanced capability to support multi-service decryption
(RX8200/SWO/VP/S2/HOM) Multi-service Decryption
(RX8200/SWO/VP/MSD)
Adds DVB-S2 16APSK, 32APSK capability to DVB-S2X satellite input
option • Multi-service decryption for Director by MediaKind
• Multi-service decryption DVB Common Interface
(RX8200/SWO/VP/S2X/HOM)
Adds DVB-S2X 32APSK capability to DVB-S2X satellite input option
Second Generation DVB-S2 Capable Satellite Input

MediaKind RX8200 | 10-2019-v32 3 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
 • Enables MPEG-2 SD & HD [Link] decoding
• Multi-service decryption for BISS
• Requires additional RX8200/HWO/HEVC/B option
• Multi-service filtering (n from m service filtering)

Video Decoding Options

The RX8200 Advanced Modular Receiver provides capability to
decode every video compression standard in use today including
support for the newest and highest quality HEVC [Link].
The RX8200 can be configured with the video decode capability of
your choice - from the simplest SD to the most sophisticated HEVC
[Link] HD decoding.
[Link] Decode Options
MPEG-2 and MPEG-4 AVC SD [Link] Decoding Value Pack
(RX8200/SWO/VP/MP24/SD)
• Enables MPEG-2 SD and MPEG-4 AVC SD [Link] decoding
MPEG-2 and MPEG-4 AVC SD/HD [Link] Decoding Value Pack
(RX8200/SWO/VP/MP24/HD)
• Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD [Link]
decoding
HEVC, MPEG-4, MPEG-2 SD/HD [Link] Decoding Value Pack
(RX8200/SWO/VP/HEVC)
• Enables MPEG-2 SD and HD, MPEG-4 AVC SD and HD, HEVC SD
and HD [Link] decoding
• Requires additional RX8200/HWO/HEVC/B option

[Link], Contribution Decode Options

HEVC 1080p, MPEG-2/MPEG-4 [Link] Decoding Hardware
(RX8200/HWO/HEVC/B)
• Dormant hardware for HEVC and MPEG-2/MPEG-4 [Link] decoding
• HEVC [Link] and [Link] capable decoding hardware - up to 1080p
• Enables Low Latency decoding on any decode Value Pack
purchased
• Enable decoding with additional Value Packs

MPEG-4 AVC and MPEG-2 SD & HD [Link] Contribution Decoding Value

Pack (RX8200/SWO/VP/CONT)
•Enables MPEG-4 AVC SD & HD [Link] decoding
•Enables MPEG-2 SD & HD [Link] decoding
• Requires additional RX8200/HWO/HEVC/B option
HEVC, MPEG-4 AVC and MPEG-2 SD & HD [Link] Contribution
Decoding Value Pack (RX8200/SWO/VP/CONT/HEVC)
• Enables HEVC SD & HD [Link] decoding
• Enables MPEG-4 AVC SD & HD [Link] decoding

MediaKind RX8200 | 10-2019-v32 4 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
 Video Processing Options Audio Options
The RX8200 offers a wide range of video processing capability to The RX8200 Advanced Modular Receiver provides many different
allow the decoded video to easily interface to HD and SD audio capabilities to allow optimal connectivity for many
infrastructures. wide-ranging and varied applications. Capability for 2x stereo pairs of
audio decode and pass-through is included as standard. Decoded
High Quality Format Conversion Dormant Hardware
audio will be embedded in (HD)SDI outputs and output via physical
(RX8200/HWO/HQCONV/B)
audio interfaces.
• Dormant format conversion hardware - Functionality enabled Additional Balanced Audio Output (RX8200/HWO/AUD/B)
with additional Value Pack
• Increase the number of physical balanced analog and digital
High Quality Format Conversion Value Pack outputs form 2x stereo pairs to 4x stereo pairs
(RX8200/SWO/VP/HQCONV)
4x Audio Capability (RX8200/SWO//VP/EXAUD)
• Grade 1 quality Down-conversion of HD to SD
• Enables up to eight decodes
• Capability to Down-convert 1080p 50/60 to 1080i, 720p or SD
• Enables pass-through of audio services three and four
• Provides broadcast quality simultaneous down-conversion
allowing one HD transmission to address both HD and SD • Compatible with MPEG-1 Layer II, Dolby Digital, AAC, Dolby®E and
distribution needs linear audio
• Up-conversion of SD to HD resolution ([Link] modes only) • Embeds up to eight channels of audio into the (HD) SDI video
• Non-simultaneous up-conversion to 720p or 1080i resolution output
• Cross-conversion of HD video from 720p to 1080i or from 1080i to • Enables Phase Aligned Audio using MPEG-1 Layer II or AAC audio
720p ([Link] modes only) • Phase Aligned Audio in 2x aligned groups of 4x stereo pairs or 1x
aligned group of 8x stereo pairs
SimulSync Value Pack (RX8200/SWO/VP/SSYNC)
• Requires additional audio output hardware (RX8200/HWO/BAL/
• Provides synchronized, tiled 4k UHDTV capability AUD/B) if four stereo pairs of physical audio interfaces are desired
• Provides full frame , synchronized left & Right eye 3D capability
XLR Terminal Audio Break-Out Cable
• Additionally requires HQ Format Conversion Value Pack (RX8XXX/CABLE/XLR)
• Requires separate RX8200 unit for each HD 4k tile
• Provides XLR terminal connections for analogue and digital audio
• Requires separate RX8200 units for left & Right eye video decode
output
• 1x stereo pair per breakout cable via 2x XLR connectors
Screw Terminal Audio Break-Out Cable
(RX8XXX/CABLE/SCRTRM)
• Provides screw terminal connections for analog and digital
audio output
• 1x stereo pair per breakout cable via 2x Screw terminal
connectors

MediaKind RX8200 | 10-2019-v32 5 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
Specifications

Input

Connector: 1x BNC (F) 75 Ohm

Max. input rate: 208 Mbps
ASI Transport Stream Input
Packet length: 188/204 byte packets
Standard: EN50083-9

Satellite Input Options

Connector: 4x F-Type (F), 75 Ohm

Frequency range: 950 MHz to 2150 MHz
Input level: -25 dBm to -65 dBm
Modulation: DVB-S QPSK, DVB-S2 QPSK, 8PSK
Standard: EN300 421, EN302 307
DVB-S Symbol rate: 1 Msyms to 45 Msyms
2nd Generation Satellite Input, Satellite & DVB-S2 Symbol rate: 1 Msyms to 60Msyms on inputs 1 & 2, Max bit rate 170Mbps, 31 Msyms,
IP input Max bit rate: 81Mbps on input 3 & 4
FEC DVB-S : 1/2, 2/3, 3/4, 5/6, 7/8
FEC DVB-S2 QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
DVB-S2 FEC frame: Short & Normal frames
DVB-S2 Physical layer scrambling
LNB Power: 13V, 18V or off, 22 kHz on/off

Modulation: DVB-S2 16APSK and 32APSK

FEC, DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
DVB-S2 HOM
FEC, DVB-S2 32APSK: 3/4, 4/5, 5/6, 8/9, 9/10
Requires DVB-S2 Capable Satellite Input (RX8200/HWO/S2/2/B )

Connector: 4x F-Type (F), 75 Ohm

Frequency range: 950 MHz to 2150 MHz
Input level: -25 dBm to -65 dBm nominal (Symbol rate dependent)
Modulation: DVB-S QPSK, DVB-S2 QPSK, 8PSK, 16APSK, DVB-S2X QPSK, 8PSK, 16APSK
Standard: EN300 421, EN302 307-1, EN302 307-2
DVB-S2X Satellite Input DVB-S Symbol rate: 1 Msyms to 45 Msyms
DVB-S2 Symbol rate: 1 Msyms to 54Msyms Max bit rate 170Mbps
DVB-S2X Symbol rate: 54MSyms
DVB-S2 FEC frame: Short & Normal frames
DVB-S2 Physical layer scrambling
LNB Power: 13V, 18V or off, 22 kHz on/off

Modulation: DVB-S2X 32APSK

DVB-S2X HOM
Requires DVB-S2X Satellite Input (RX8200/HWO/S2X/B)

IP Input

Connector: 2 x RJ 45
MPEG over Gigabit Ethernet IP Input Format: 100/1000BaseT
(FAZ 101 0113/252, 281) Max. input rate: 208Mbps
SMPTE 2022M (Pro-MPEG) FEC

MediaKind RX8200 | 10-2019-v32 6 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
G703 Input Options

Connector: BNC (F)

Network: G.703 compliant PDH
MediaKind G.703
Input: E3 or DS-3 (selectable)
Bit-rates: 34 Mbps or 45 Mbps versions

DVB-T/T2 Input Options

Connector: 1x F-Type (F) 75 Ohm

Channel bandwidth: 6, 7, 8MHz
DVB-T/T2 Input Frequency range: UHF 470 – 862 MHz,
VHF 174 – 230 MHz
Input MER level: 6 - 36dB

TS Output
TS Output For ASI Out See HD & SD video out options

Transport encapsulation into IP

MPTS/IP/UDP/RTP
SPTS/IP/UDP/RTP with single service filtering - CBR mode
IP output VBR mode - Null packets dropped
2x Gigabit Ethernet outputs, 100/1000 auto-sensing
IP Output SMPTE 2022M (Pro-MPEG) FEC
Multiple services filtered to 1 outgoing service on ASI and IP TS output
Remap PIDs for the filtered service
Output: CBR on ASI and IP SPTS
MPE based data de-encapsulation
MPE max. bit-rate: 100 Mbps

Content Security

Director single service decryption

Director by MediaKind Director over-air remote control
NexGuard Network ID Forensic Watermarking

Enables support for all major CAM modules

DVB Common Interface Single service decryption
Service pre-filtering

Decryption of BISS Mode 1 and E

BISS Decryption
Decryption of BISS 2 Fixed key Mode 1 and E

Director multi-service decryption

Decryption of up to 24 services
Common Interface multi-service decryption
Single CAM, up to 10 services or 24 PIDs
BISS multi-service decryption
Multi-Service Decryption/Filtering Decryption of up to 24 services
Filter N incoming services to M outgoing services
Number of services: 24 max as 1x MPTS.
Remap PIDs on a single service
Output: CBR on ASI and IP MPTS
Stream splitting - up to 8 services as IP SPTS

MediaKind RX8200 | 10-2019-v32 7 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
VIDEO DECODING OPTIONS

[Link] Decoding

Profiles: MP@ML
MPEG-2 SD Decode Max video rate: 15 Mbps (MP@ML)
Video format: 480i and 576i 29.97, 25 fps

Profiles: MP@L3 - All units

HP@L3.1—Needs MPEG-2 & 4 [Link] HW option
MPEG-4 AVC SD Decode Max. video rate: 12 Mbps - All units
17.5 Mbps - Needs [Link] HW option
Video format: 480i and 576i 29.97, 25 fps

HEVC Profiles: MAIN / MAIN10

Sampling: 8-bit and 10-bit
Levels and max. video rate
HEVC SD Decode
L3 - 6 Mbps, L3.1 - 10 Mbps
L4 - 30 Mbps, L4.1 - 50 Mbps
Video format: 480i and 576i 29.97, 25 fps

Profiles: MP@HL
Max. video rate: 80 Mbps (MP@HL)
MPEG-2 HD Decode
Video format: 1080i at 29.97 and 25 fps,
720p at 59.94 and 50 fps

Profiles: MP@L4, HP@L4 - All units

HP@L4.1 - Needs MPEG-2 & 4 [Link] HW option
MPEG-4 AVC HD Decode Max. video rate: 25 Mbps - All units, 62.5Mbps - Needs [Link] HW option
Video format: 1080i at 29.97 and 25 fps,
720p at 59.94 and 50 fps

HEVC Profiles: MAIN / MAIN10

Sampling: 8-bit and 10-bit
Levels and max. video rate
HEVC HD Decode
L4 - 30 Mbps, L4.1 - 50 Mbps
Video format: 1080i at 29.97 and 25 fps,
720p at 59.94 and 50 fps

Closed captions, DVB Subtitle burn-in, SD resolution Teletext burn-in

WST, Inverted Teletext, EBU Teletext subtitles and non-subtitles, WSS, VITC, VITC in PES, VPS,
VBI with [Link] Decoding Modes Video Index, VANC data-piping, Service name in VANC, monochrome samples, OP47 pass-
through
VITS, NABTS, AMOL48, AMOL96, TV Guide

MediaKind RX8200 | 10-2019-v32 8 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
[Link] Decoding

Profile: 422@ML
MPEG-2 SD [Link] Max. video rate: 50 Mbps
Video format: 480i and 576i 29.97, 25 fps

Profiles: 422P@HL
MPEG-2 HD [Link] Max. video rate: 90 Mbps
Video format: 1080i at 29.97, 30 and 25 fps, 720p at 59.94, 60 and 50 fps

MPEG-4 Profile: 422HP@L3

MPEG-4 AVC SD [Link] Max. video rate: 50 Mbps
Video format: 480i and 576i 29.97, 25 fps

HEVC Profile: MAIN [Link]

Sampling: 8-bit and 10-bit
Levels and max. video rate:
HEVC SD [Link]
L3 - 6 Mbps, L3.1 - 10 Mbps
L4 - 30 Mbps, L4.1 - 50Mbps
Video format: 480i and 576i 29.97, 25 fps

MPEG-4 Profiles: HIGH / HIGH10 / HIGH422@L4.2

Sampling: 8-bit and 10-bit
MPEG-4 AVC HD [Link] Decode
Max. video rate: 50 Mbps CABAC, 85 Mbps CAVLC
Video format: 1080i at 29.97 and 25 fps 720p at 59.94 and 50 fps

HEVC Profiles: MAIN [Link] 10@L4.2

Sampling: 8-bit and 10-bit
HEVC HD [Link] Decode Levels and max. video rate
L4 - 30 Mbps,L4.1 - 50 Mbps
Video format: 1080i at 29.97 and 25 fps 720p at 59.94 and 50 fps

Profiles: 422HP@L4.2
MPEG-4 AVC HD [Link] 1080p 50/60
Max video rate: 85 Mbps CAVLC
decode
Video format: 1080p at 59.94 and 50fps

VBI with [Link] decoding modes Closed Captions, VITC, VBI in PIX

MediaKind RX8200 | 10-2019-v32 9 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
Audio Options

Connector: 2x 9-Pin D-type

Analog audio: two balanced stereo pairs
Balanced Audio Output Digital audio: two balanced stereo pairs
QTY 1 fitted as standard
QTY 2 can be fitted for 4x stereo pair output - requires RX8200/SWO/4AUD)

2x MPEG-1 Layer-II audio decode

2x Dolby Digital® decode
2x Dolby Digital® Pass-through
2x Dolby® Digital Plus Pass-through
Standard with any Video Decode Option:
2x Dolby®E pass-through
2x Linear PCM decode
Audio sampling rate: 48 kHz
Decoded audio gain adjustment

2x Dolby® Digital 5.1 decode and down-mix to 2.0*

Dolby® Digital 2x Dolby® Digital 2.0/5.1 pass-through compressed and embedded in (HD)SDI
1x Dolby® Digital 5.1 decode

Dolby® Digital Plus 2x Dolby® Digital Plus 2.0/5.1 pass-through compressed and embedded in (HD)SDI

2x 5.1 down-mix to 2.0

AAC Audio 2x 2.0 decode
1x 5.1 decode

MPEG-1 Layer II audio or AAC audio

2x phase aligned groups of 4x stereo pairs, or 1x group of 8x stereo pairs
Phase Aligned Audio
Phase aligned to enable 5.1 carriage
Requires Extra audio Value Pack 4x Audio Capability (RX8200/SWO//VP/EXAUD)

Extends licensed audio decodes to more channels

8x MPEG-1 Layer II audio decode
6x Dolby® Digital 2.0 decode, 5.1 to 2.0 down-mix
4x Dolby® Digital 2.0/5.1 pass-through - compressed and embedded in (HD)SDI
4x Audio Capability
4x Dolby® Digital Plus 2.0/5/1 pass-through - compressed and embedded in (HD)SDI
1x Dolby® Digital 5.1 decode
8x AAC stereo pairs
4x Dolby®E pass-through


License key dependent

MediaKind RX8200 | 10-2019-v32 10 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
 Video Processing

High Quality Format-Conversion Simultaneous Down-conversion (HD to SD): center cut out, manual/AFD controlled
Grade 1 quality down-conversion Down-conversion from 1080p 50/60 to 1080i, 720p or SD

Up-conversion Non-simultaneous up-conversion (SD to HD): To 720p or 1080i ([Link] modes only)

Non-simultaneous cross-conversion 720p to 1080i or 1080 to 720p

Cross-conversion
No frame rate conversion

Aspect Ratio Conversion 16:9 to 4:3 center cut ARC in SD modes

Enables Frame Sync

Frame Synchronization
Connector: 1x BNC (F) 75 Ohm

Video and TS Output

Video Output

HD and SD Video Output Connector: 1x BNC (F) 75 Ohm

Composite Video Format: PAL / NTSC

Connector: 1x 15-pin D-type

Video RGB-HD (SVGA)
Format: RGB H&V/YPrPb (switchable)

Connector: 3x BNC 75 ohms

3 Gbps HD-SDI standard: SMPTE 424M
HD-SDI standard: SMPTE 292M
SDI/HD-SDI/DVB ASI-C (switchable) SD-SDI standard: SMPTE 259M
Embedded Audio: SMPTE 299M (HD) SMPTE 272M (SD)
Embedded Audio Channels: up to 8x stereo pairs
ASI standard: EN50083-9

Data and Control Options

Remote control connector: 1x 9-pin D-type

RS232 remote control
MediaKind Alteia protocol
RS232 Remote Control and Data
RS232 data connector: 1x 9-pin D-type
RS232 asynchronous data
RS232 data rate: Max. 38.4 kbps

MediaKind RX8200 | 10-2019-v32 11 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.
 Standard Features

Program selection for ATSC, DVB and MPEG-only streams

Features
One alarm relay, two relays under SCTE 35 control

Front panel keypad and LCD

Control SNMP control, traps and alarms
Web browser

Physical and Power

Dimensions (W x D x H) 442.5 x 545 x 44mm (17.5“ x 20.7“ x 1.75“ approx.)

Input Voltage 90 VAC / 240 VAC

Power Consumption 100W Max. (depending on options fitted)

Cooling Integrated fan

Environmental Conditions

Operating Temperature 0°C to +50°C (32° to 122°F)

Storage Temperature -20°C to +60°C (-4° to 140°F)

Relative Humidity 5% to 95%

Compliance

Compliance CE Marked in accordance with all applicable EU Directives

EN55022, EN55024, EN61000-3-2, EN61000-3-3, AS/NZS CISPR 22, ICES-003 and FCC CFR47
EMC Compliance
Part 15B Class A

EN60950-1, IEC60950-1, UL 60950-1 and CAN/CSA-C22.2 No 60950-1.

Safety Compliance
NRTL Listed.

MediaKind RX8200 | 10-2019-v32 12 [Link]

© MediaKind
MediaKind maintains a policy of product improvement and reserves
the right to modify the specifications without prior notice.