Scribd
Upload
395 views2 pages

Hydraulic Oil for Industrial Use

Gulf Harmony AW is a line of high performance anti-wear hydraulic oils developed for use in mobile and industrial hydraulic systems operating under moderate to severe conditions. The oils are formulated with high quality base oils and additives to provide excellent protection against oxidation, rust, corrosion, and wear. They meet specifications for global industry standards and major OEMs. The oils are available in ISO viscosity grades 10 through 460 and provide benefits such as long component life, fast water separation, and trouble-free operations. They are suitable for use in hydraulic systems, plain and rolling element bearings, gear sets, and general machine lubrication.

Uploaded by

atripathi2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
395 views2 pages

Hydraulic Oil for Industrial Use

Gulf Harmony AW is a line of high performance anti-wear hydraulic oils developed for use in mobile and industrial hydraulic systems operating under moderate to severe conditions. The oils are formulated with high quality base oils and additives to provide excellent protection against oxidation, rust, corrosion, and wear. They meet specifications for global industry standards and major OEMs. The oils are available in ISO viscosity grades 10 through 460 and provide benefits such as long component life, fast water separation, and trouble-free operations. They are suitable for use in hydraulic systems, plain and rolling element bearings, gear sets, and general machine lubrication.

Uploaded by

atripathi2009
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Gulf Harmony AW

High performance anti-wear hydraulic oil


Product Description
Gulf Harmony AW series are high performance anti-wear hydraulic oils developed for high pressure
hydraulic systems operating under moderate to severe conditions in mobile and industrial service. These oils
are formulated with high quality base oils and carefully selected performance additives to provide excellent
protection against oxidation degradation, rust & corrosion and wear. They also possess superior foam
control, water separation and rapid air release properties. The lower viscosity grades (ISO 10 through 100)
are formulated with field proven thermally stable zinc based anti-wear additive system and the higher
viscosity grades (ISO 150 through 460) are based on ashless anti-wear additive system They exceed the
performance requirements of global industry standards viz. DIN 51524 Part 2-HLP, AFNOR NFE 48-603
(HM) & ISO 11158 HM and majority of the international OEMs viz. Denison, Fives Cincinnati (MAG IAS,
LLC) & Eaton (Vickers).

Features & Benefits

 Excellent thermo-oxidative stability controls the formation of sludge & varnish and improves oil life
 Exceptional anti-wear property results in longer pump and component life and reduces costs
 Superior demulsibility helps in faster separation of water from oil and resists formation of emulsions
 Special rust & corrosion inhibitors protect multi-metallurgy components even in presence of moisture
 Rapid air release property minimises chances of pump cavitation leading to trouble free operations
 Compatible with multi-metals and sealing materials commonly used in hydraulic systems

Applications
ISO VG 10 through VG 100

 Hydraulic systems operating under moderate to severe conditions in mobile and industrial service
 Older hydraulic systems where leakage is a problem and a cost-effective hydraulic oil providing all-
round protection is required
 Mobile hydraulic fluid power transmission systems and general machine lubrication
ISO VG 150 through VG 460

 Recommended for a wide variety of following industrial applications requiring anti-wear type of oils:
 Circulating oil systems
 Plain and rolling element bearings
 Gear sets
 General Machine lubrication
Specifications, Approvals & Typical Properties

ISO Viscosity grades 10 15 22 32 46 68 100


Specifications
DIN 51524 Part 2-HLP X X X X X X X
AFNOR NFE 48-603 (HM), ISO 11158 HM X X X X
Eaton (Vickers) M-2950-S, M-2952-S, I-286-S X X X
Has the following Approvals
Fives Cincinnati (MAG IAS, LLC) P-68 P-70 P-69
Denison HF-0, HF-1, HF-2 X X X
Typical Properties
Test Parameters ASTM Typical Values
Method
Viscosity @ 40 ºC, cSt D 445 10.1 15.1 22.2 31.2 45.9 68.3 98.3
Viscosity Index D 2270 97 97 98 100 100 99 97
Flash Point, ºC D 92 136 164 186 202 210 218 230
Pour Point, ºC D 97 -30 -24 -24 -24 -24 -24 -12
Density @ 15ºC, Kg/l D 1298 0.847 0.858 0.865 0.87 0.874 0.881 0.886
Rust Test D 665A/B Pass Pass Pass Pass Pass Pass Pass
Emulsion Test @ 54 oC Pass Pass Pass Pass Pass Pass -
D 1401
30 minutes max @ 82 oC - - - - - - Pass
Foam Test, foam after 10 minutes D 892
Nil Nil Nil Nil Nil Nil Nil
of settling for all sequences
Turbine Oil Stability Test, hrs D 943 2000+ 2500+ 2000+
FZG, fail load stage, minimum DIN 51354
- - - 11 11 11 11
Part II

ISO Viscosity grades 150 220 320 460


Specifications
DIN 51524 Part 2-HLP X
AFNOR NFE 48-603 (HM) X
ISO 11158 HM X
Typical Properties
Test Parameters ASTM Typical Values
Method
Viscosity @ 40 ºC, cSt D 445 148.9 221 321.1 467
Viscosity Index D 2270 96 96 95 95
Flash Point, ºC D 92 246 256 266 280
Pour Point, ºC D 97 -9 -6 -6 -3
Density @ 15ºC, Kg/l D 1298 0.89 0.894 0.898 0.902
Rust Test D 665A/B Pass Pass Pass Pass
Emulsion Test
@ 82 oC D 1401 Pass Pass Pass Pass
30 minutes max
Foam Test, foam after 10 minutes
D 892 Nil Nil Nil Nil
of settling for all sequences
Turbine Oil Stability Test, hrs D 943 1500+ 1000+
FZG, fail load stage, minimum DIN 51354
11 11 11 11
Part II
January 2014

You might also like