Pump unloading


RE 18310-13
Edition: 03.2016
VEP-VSP2 05.90.06 - X - Y - Z Replaces: 04.2010

Technical data
Operating pressure P1 = 100 bar (1450 psi)
P2 = 210 bar (3000 psi)
Max. flow of valve 2 30 l/min. (8 gpm)
Weight 2.5 kg (5.5 lbs)
Manifold material Aluminium
Note: aluminium bodies are often strong enough for operating
pressures exceeding 210 bar (3000 psi), depending from the
fatigue life expected in the specific application. If in doubt, consult
our Service Network.
Fluid Mineral oil (HL, HLP) according
DIN 51524
Description Fluid temperature range -30 °C to 100 (-22 to 212 °F)
Through the check valve, the pump inlet P1 is combined to Viscosity range 10 to 500 mm2/s (cSt)
the inlet P2 to give maximum flow out of C at low pressure. Recommended degree of fluid Class 19/17/14 according to
As load pressure (C) increases and reaches the selected contamination ISO 4406
unloading setting, the pilot piston (1) is displaced and Other technical data see data sheet 18350-50
exhausts to tank the spring chamber of the main spool
Note: for applications outside these parameters, please consult us.
allowing P1 pump to be by-passed to tank. Above this
pressure threshold, only P2 pump continues to deliver oil
out of C, with a resulting reduced flow at high pressure.
The incorporated relief cartridge (2) provides protection by
limiting the maximum pressure in the system line (C).

Characteristic curve
Pressure Δp

Flow Q

 RE 18310-13/03.2016, Bosch Rexroth Oil Control S.p.A.

 Dimensions [mm (inches)]
2 VEP-VSP2 | Pump unloading

Ordering code 05.90.06 X Y Z

Pump unloading SPRINGS

Adj. pressure Pres. increase Std. setting

range bar/turn Q=5 (l/min.)
Adjustments bar (psi) (psi/turn) bar (psi)
20-100 24 50
03 Leakproof hex. socket screw Valve 1
(290-1450) (348) (725)
20
50-210 47 200
Valve 2
(725-3000) (682) (2900)
20-100 24 50
Port sizes P1 - P2 C T Valve 1
(290-1450) (348) (725)
35
100-350 82 300
04 G 3/4 G 3/4 G 3/4 Valve 2
(1450-5000) (1189) (4350)
Tamper resistant cap
ordering code 11.04.23.003
Mat. no. R930000754
Preferred types
Type Material number Type Material number
05900603042000A R930059057
05900603043500A R930059058

Dimensions

Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information set
Via Leonardo da Vinci 5 forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It
P.O. Box no. 5 may not be reproduced or given to third parties without its consent. The data
41015 Nonantola – Modena, Italy specified above only serve to describe the product. No statements concerning
Tel. +39 059 887 611 a certain condition or suitability for a certain application can be derived from
Fax +39 059 547 848 our information. The information given does not release the user from the
[email protected] obligation of own judgment and verification. It must be remembered that our
www.boschrexroth.com/compacthydraulics products are subject to a natural process of wear and aging. Subject to change.

Bosch Rexroth Oil Control S.p.A., RE 18310-13/03.2016