design worldwide partnership

B502 ff&e specification

Project No. : VN-08-379

Project Name : Le Meridien HCMC
Area Name/No. : Spa area ( 9th floor)
Isssue Date : 06-Feb-12
Revision :

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e schedule

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area ( 9th floor)
Issue Date : 06-Feb-12
Revision :

Code Description Qty

CASEGOODS
HC-001 Rest Footstool @ Wet lounge 5
HC-003 Coffee table @ Spa bistro 4
HC-004 Shelving @ Gym 1
UPHOLSTERY
HC-201 Armchair @ Pool deck 5
HC-202 Deck chaise @ Pool deck 6
HC-203 Banquet seat @ Spa bistro 1 Set
HC-204 Bar stool @ Spa bistro 3
HC-205 Chair @ Reception 4
HC-206 Chaise lounge@ Relaxation coed 6
HC-207 Sofa 1 seat @ Treatment 6
HC-208 Sofa 2 seats @ Treatment 1
HC-209 Stool @ Treatment 8
HC-211 Stool @ Lounge area ` 2
DRAPERY
HC-301.1/ 301.2 Motorised roller blind @ Wet lounge, Gym area TBC
HC-302 Manual sheer curtain @ Relaxtion coed, Treatment area TBC
LIGHTING
HC-501 Suspended ceiling light @ Spa lobby 1 Set

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-001
Description : Rest Footstool @ Wet lounge
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Rest Footstool By Cane-line
Dimension : Dia: 60cm; Height: 41cm
Manufacturer/Supplier : Tong Khai Minh Co.Ltd
Instructions :
1 Construction:
The Rest side table can be combined with round serving tray. Water proof fabric upholstered finish

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-001A
Description : Fabric for Rest Footstool @ Wet lounge
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Spectrum Dove 48032-0000
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.

8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-003
Description : Coffee table @ Spa bistro
Illustration / Photograph
Location :
level no total
quantity Code 214 1
Code 017 2
Code 077 1
total quantity 4

specification
Cappellini Fjord foot stool/ Moroso/ by Patricia Urquiola
Model :
Cod. 214 - Fjord small foot stool options B-D 44 x 55 x H 33 cm
Dimension : Cod. 017 - Fjord foot stool options B-D 75 x 55 x H 35 cm
Cod. 077 - Fjord foot stool options B-D 110 x 75 x H 38 cm
Manufacturer/Supplier : Tong Khai Minh Co., Ltd
Instructions :
1 Construction:
Black sides, black leather top, white stitch. The footstools/low tables are offered in three shapes and sizes.
They are constructed using internal plastic frames and leather-covered sides and leather tops, with top stitch.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.
address dwp offices
dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-003A
Description : Fabric for Coffee table @ Spa bistro
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : STAMSKIN/ Top
Color : F4340FR-20129
Composition : 100% via Texyloop process
Width : Width: 140cm, Thickness: 1.2-1.4mm,
Manufacturer/Supplier : Anh Tuyet JSC
197/4 Nguyen Van Troi st., Phu Nhuan District, HCMC
Tel: +84 (08) 38441802, Email: [email protected]
Contact: Ms Bao Tien, Mobile: 0906.630.773
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
bolt ends.

8 All furnishings are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-004
Description : Shelving @ Gym
Illustration / Photograph
Location :
level no total
quantity
total quantity 1
161cm

100 cm 70 cm 70 cm

specification
Model : Libreria shefving/ Prodotto/ by Patricia Urquiola
Dimension : Width: 241cm; Depth: 33cm; Height: 161cm
Manufacturer/Supplier : Tong Khai Minh Co.Ltd
Instructions :
1 Construction:
Frame in steel with white epoxy powder coat finish,
Shelves in PDF with black or white matte lacquer finish
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-201
Description : Armchair @ Pool deck
Illustration / Photograph
Location :
level no total
quantity
total quantity 5

specification
Model : Rock chair / Sixinch/ by Rainer Mutsch
Dimension : Width: 103cm; Depth: 97cm; Height: 64cm
Manufacturer/Supplier : Ddesign Srl/ Tong Khai Minh Co., Ltd
Instructions :
1 Construction:

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-202
Description : Deck chaise @ Pool deck
Illustration / Photograph
202A1 Location :
level no total
quantity
total quantity 6

202A2
202A2 MT16
Legs finish

specification
Model : Flipt /Cerruti Baler /by Jeff Miller
Dimension : 70 x 98/190 x H 80 cm
Manufacturer/Supplier : Tong Khai Minh Co., Ltd
Instructions :
1 Construction:
Convertible armchair/chaise-longue with steel structure, CFC-free foamed polyurethane seat and stainless
steel base. An internal double hinge allows the seat to flip forward, opening up and thus doubling the length of
the chair. Removable cover in fabric in a two-color combination, with the possibility to combine different
fabrics similar thickness.
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-202A1
Description : Fabric for deck chaise @ Pool deck
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Canvas Jockey red 5403-0000
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and
7 mildew
Ship all of fabrics.
fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-202A2
Description : Fabric for deck chaise @ Pool deck
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Spectrum Dove 48032-0000
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-203
Description : Banquet seat @ Spa bistro
Illustration / Photograph
Location :
level no total
quantity
total quantity 1 set

specification
Model :
Dimension : As shown
Supplier : To be bid
Instructions :
1 Construction: Fabric upholstered banquet seat
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-203A
Description : Fabric for banquet seat @ Spa bistro
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella/ Richard Frinier collection
Color : Sailcloth Sahara 32000-0016
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-203B
Description : Decorative cushion @ Sofa
Illustration / Photograph
Location :
level no code quantity
10

total quantity 10

specification
Model : Square throw pillow with 6mm. self piping all around. Refer to image for Design intent & details.
Dimension : 450mm (W) X 450mm (L)
Color : See fabric details.
Construction : Soft cushion, fabric covered.
Manufacturer/Supplier : To be bid
Instructions
1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-203B1
Description : Decorative cushion @ Sofa
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Sunbrella
Dimension : Mainstreet Wren 42048-00005
Color : 100% sunbrella acrylic
Construction : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions 1 Cushion content: 50/50% down filling & microfibre fill mix with internal cover for insert.
2 Manufacturer fabricator to verify quantity before fabrication.
3 Removable cushions and throw pillow to have concealed zippers in color to match fabric.
4 All stitchings to be double overlock, joined with safety stitchings.
5 All furnishing are to be contract quality, suitable for commercial use.
6 Fabric to be treated with Scotch guard fabric protection treatment.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-204
Description : Bar stool @ Spa bistro
Illustration / Photograph
Location :
level no total
quantity
total quantity 3

specification
Model : Fjord bar stool / /Moroso / By Patricia Urquiola

Dimension : FJ112 - bar stool high 49 x 50 x H 91/75 cm

Manufacturer/Supplier : Tong Khai Minh Co., Ltd

Instructions :
1 Construction:

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-204A
Description : Fabric for bar stool @ Spa bistro
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : STAMSKIN/ Neo
Color : F4340FR-20162
Composition : 100% via Texyloop process
Width : Width: 140cm, Thickness: 1.2-1.4mm,
Manufacturer/Supplier : Anh Tuyet JSC
197/4 Nguyen Van Troi st., Phu Nhuan District, HCMC
Tel: +84 (08) 38441802, Email: [email protected]
Contact: Ms Bao Tien, Mobile: 0906.630.773
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-205
Description : Chair @ Reception
Illustration / Photograph
Location :
level no total
quantity
total quantity 4

specification
Model : Bertoia side chair/ Knoll studio

Dimension : 56 x 57 x H 44/79 cm

Manufacturer/Supplier : Tong Khai Minh Co., Ltd

Instructions :
1 Construction:
Seat cushions and back pads are secured to the chair with domed metal lock snaps and have fabric edges
Frame is welded steel with rods of chrome polish finishes
Chairs with powder coat finish and vinyl seat cushion are appropriate for outdoor use with proper care and
limited exposure to the elements
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-205A
Description : Fabric for chair @ Reception
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : STAMSKIN/ Neo
Color : F4340FR-20158
Composition : 100% via Texyloop process
Width : Width: 140cm, Thickness: 1.2-1.4mm,
Manufacturer/Supplier : Anh Tuyet JSC
197/4 Nguyen Van Troi st., Phu Nhuan District, HCMC
Tel: +84 (08) 38441802, Email: [email protected]
Contact: Ms Bao Tien, Mobile: 0906.630.773
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-206
Description : Chaise lounge@ Relaxation coed
Illustration / Photograph
Location :
level no total
quantity
total quantity 6

70 cm

40 cm

specification
Model : The Cleopatra Chaise lounge/ Alemanno Itali/ by Dr Med Billingham
Dimension : Width: 162cm; Depth: 85cm; Height: 40/70cm
Manufacturer/Supplier : Tong Khai Minh Co., Ltd
Instructions :
1 Construction: ,
Timber base , Fabric upholstered body
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-206A
Description : Fabric for chaise lounge@ Relaxation coed
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Linen Canvas 8353-0000
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no bolt
8 ends.
All furnishings are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-207
Description : Sofa 1 seat @ Treatment
Illustration / Photograph
Location :
level no total
quantity
total quantity 6

specification
Model : Redondo sofa/ prodotto/ by Patricia Urquiola
Dimension : Width: 90cm; Depth: 68cm; Height: 70cm; Height seat: 40cm
Manufacturer/Supplier : Tong Khai Minh Co., Ltd
Instructions :
1 Construction:
Small armchair in injected flame-retardant foam with internal frame in steel.
Feet in polypropylene
Sofas and elements; Stress-resitant polyurethane foam with differentiated densities and polyester fibre
on wood frame.
Feet in polypropylene screwed to the frame

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-207A
Description : Fabric for sofa 1 seat @ Treatment
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Rib Natural 7704-0000
Composition : 44% sunbrella acrylic, 56% Polyester
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and
7 mildew
Ship all of fabrics.
fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-208
Description : Sofa 2 seats @ Treatment
Illustration / Photograph
Location :
level no total
quantity
total quantity 1

specification
Model : Redondo sofa/ prodotto/ by Patricia Urquiola

Dimension : Width: 197cm; Depth: 68cm; Height: 40/70cm

Manufacturer/Supplier : Tong Khai Minh Co., Ltd

Instructions :
1 Construction:
Small armchair in injected flame-retardant foam with internal frame in steel.
Feet in polypropylene
Sofas and elements; Stress-resitant polyurethane foam with differentiated densities and polyester fibre
on wood frame.
Feet in polypropylene screwed to the frame
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-208A
Description : Fabric for sofa 2 seats @ Treatment
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Rib Natural 7704-0000
Composition : 44% sunbrella acrylic, 56% Polyester
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and
7 mildew
Ship all of fabrics.
fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-209
Description : Stool @ Treatment
Illustration / Photograph
Location :
level no total
quantity
total quantity 8

40 cm

45 cm

45 cm

specification
Model : pouf / prodotto/ by Patricia Urquiola

Dimension : Width: 70cm; Depth: 70cm; Height: 40cm

Manufacturer/Supplier : Moroso/ Tong Khai Minh Co., Ltd

Instructions :
1 Construction:
Stress-resitant polyurethane foam with differentiated densities and polyester fibre
on wood frame.
Feet in polypropylene screwed to the frame

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-209A
Description : Fabric for stool @ Treatment
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Rib Natural 7704-0000
Composition : 44% sunbrella acrylic, 56% Polyester
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-211
Description : Stool @ Lounge area
Illustration / Photograph
Location :
level no code of vinyl quantity

total quantity 2

Ǿ75 cm

36 cm

75 cm
specification
Model : Chat pouf by Nadadora
Dimension : Dia.: 750cm; Height: 36cm
Manufacturer/Supplier : Sancal/ Tong Khai Minh Co.Ltd
Instructions :
1 Construction:
Pouf manufactured with fire retardent foam over steel frame upholstered in water proof fabric or leather.

2 Manufacturer to submit finish sample for Designer approval.

3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by
the manufacturer. All items provided to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-211A1
Description : Fabric for stool @ Lounge area
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Fife Plum 40012-0075
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and
7 mildew
Ship all of fabrics.
fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-211A2
Description : Fabric for stool @ Lounge area
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sunbrella
Color : Linen Canvas 8353-0000
Composition : 100% sunbrella acrylic
Width : 137.2cm
Manufacturer/Supplier : Manta
3F. 58 Dong Khoi St., Dist. 1, Hichiminh City
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Hong, Mobile: 0918.545.749
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
7 of fabrics.
Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
8 boltfurnishings
All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-301.1& 301.2
Description : Motorised roller blind @ Wet lounge, Gym area
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

HC-301.1 & 301.2

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4860 (Motorised system suitable for blind width below 230cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: [email protected]
Instructions : 1. Track to be fixed on ceiling either inside or outside pelmet.
2. Fabric to be made-up in wave style, fullness 200%.
3. Curtain to be opened in the middle for pair stack.
4. Bottom hem to be weighted to maintain the vertical wave.
5. All hems to be sewn by blind-stitches.
6. Gliders and hooks are in nylon material, no iron-containing accessory to be used.
7. Curtain length to be 0-0.5cm from carpet.
8. Transparent draws rods can be used to guide the opening of curtain.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-301.1X & 301.2X
Description : Motorised roller blind @ Wet lounge, Gym area
Illustration / Photograph
Location :
level no total
quantity
total quantity TBC

specification
Model : Motorised roller blind system for blackout blind
Product : Silent Gliss - System 4860 (Motorised system suitable for blind width below 230cm)
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: [email protected]
Instructions : 1. Ceiling fix or wall fix as appropriate.
2. System needs to be calibrated individually with fabric at factory before installation.
3. Roller blind fabric to be cut by ultrasonic cutter as appropriate.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-301.1A & 301.2A
Description : Fabric for motorised roller blind @ Wet lounge, Gym area
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Sun shade Fabrics/ 2326-001 Luxor weiss
Color : White
Composition : 100% polyester
Width : 240cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: [email protected]
Contact: Ms Bao Ngoc, Mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
boltfurnishings
8 All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-302
Description : Manual sheer curtain @ Treatment area
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

HC-302X

specification
Model : Hand operated curtain track for sheer curtain – wave style
Product : Silent Gliss - Track 3840W
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: [email protected]
Instructions : 1. Track to be fixed on ceiling either inside or outside pelmet.
2. Fabric to be made-up in wave style, fullness 200%.
3. Curtain to be opened in the middle for pair stack.
4. Bottom hem to be weighted to maintain the vertical wave.
5. All hems to be sewn by blind-stitches.
6. Gliders and hooks are in nylon material, no iron-containing accessory to be used.
7. Curtain length to be 0-0.5cm from carpet.
8. Transparent draws rods can be used to guide the opening of curtain.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-302X
Description : Manual sheer curtain @ Treatment area
Illustration / Photograph
Location :
Level no/ Area name quantity

total quantity TBC

specification
Model : Hand operated curtain track for sheer curtain – wave style
Product : Silent Gliss - Track 3840W
Dimension : As per section drawing
Manufacturer/Supplier : Supplier: Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Contact: Ms Bao Ngoc, Mobile: 091 312 7067; Email: [email protected]
Instructions : 1. Track to be fixed on ceiling either inside or outside pelmet.
2. Fabric to be made-up in wave style, fullness 200%.
3. Curtain to be opened in the middle for pair stack.
4. Bottom hem to be weighted to maintain the vertical wave.
5. All hems to be sewn by blind-stitches.
6. Gliders and hooks are in nylon material, no iron-containing accessory to be used.
7. Curtain length to be 0-0.5cm from carpet.
8. Transparent draws rods can be used to guide the opening of curtain.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-302A
Fabric for Manual sheer curtain @ Treatment area,
Description :
Relaxation code
Illustration / Photograph

Location :
Level no/ Area name quantity

total quantity TBC

specification
Style Name : Manta/ Shimmer Collection ,10-Silver
Color :
Composition : 100% polyester
Width : 320cm
Manufacturer/Supplier : Manta - Interior Fabric - Eyelet curtains
3/F, Jardine house, 58 Dong Khoi Str., District 1, HCMC, Vietnam
Tel: +84 (08) 38227012; Fax: +84 (08) 38290073
Email: [email protected]
Contact: Ms Bao Ngoc, Mobile: 091 312 7067
Instructions :
1 All fabrics to be dimensionally stable and to have appropriate backing for upholstery use.
2 Manufacturer / Fabricator to verify fabric meterage requirement prior to fabrication
3 Mill to submit cutting/stike-off/sample for Designer approval.
4 Fabric to be treated with Scotchguard fabric protection treatment.
5 Flameproof fabric to meet local codes for use on contract quality goods.
6 Warm and humid climate properties msut use non-salt based flameproofing to prevent corrosion and mildew
of fabrics.
7 Ship all fabrics on roll. Ship in largest bolt/ roll possible. Do not fold, ship first quality only. No seconds, no
boltfurnishings
8 All ends. are to be contract quality, suitable for commercial use.

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-501
Description : Suspended ceiling light @ Spa lobby
Illustration / Photograph
Location :
level no total
quantity
total quantity 1 set

specification
Model : Pendant light by contractor
Dimension : As shown
Supplier : To be bid
Instructions :
1 Construction:
White acrylic suspended ceiling light
2 Manufacturer to submit finish sample for Designer approval.
3 Manufacturer to submit shop drawings for Designer approval.
4 Manufacturer to provide exact prototype for designer approval prior to fabrication.
5 Dimensions are subject to change as per a result of perfecting the prototype.
6 Provide heat and stain resistant finish.
7 Provide carpet glides for legs, or provide hard surface glides for legs.
8 Manufacturer to submit hardware sample for designer approval.
9 All materials to be guaranteed rust and corrosion proof.
10 See Case Furniture Specifications (Preface) for additional instructions.
11 Manufacturer (vendor) warrants all products from all defects and guarantees to replace any or all parts should
they prove deficient within one year from date to owner acceptance. All costs in this regard shall be borne by

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam
 design worldwide partnership

B502 ff&e specification sheet

Project Name / No. : VN-08-379 Le Meridien HCMC
Area Name / No. : Spa area (9th floor)
Issue Date : 06-Feb-12
Revision Date :
Code : HC-501X
Description : Suspended ceiling light @ Spa lobby
Illustration / Photograph

White acrylic
Light source Light source

Framing

SECTION 1-1 SECTION 2-2

address dwp offices

dwp australia malaysia
3A Ton Duc Thang, Ben Nghe Ward, District 1 bahrain singapore
Ho Chi Minh City, Vietnam china thailand
T +84 8 3910 0690 F +84 8 3910 0691 hongkong uae
www.dwp.com india vietnam