HMC ENHANCED GUI QUICK START GUIDE 1.

0
Classic GUI to Enhanced GUI Mappings and Enhanced GUI Improvements

August 2017
Contributing Author: Karyn Corneli Co-Author: Jacobo Vargas

Table of Contents

Introduction .................................................................................................................................................. 4
Menus Available – Enhanced GUI Only ....................................................................................................... 4
Enhanced GUI Path New Features ............................................................................................................ 4
Classic GUI to Enhanced GUI Mapping ........................................................................................................ 4
Main Menu Navigation ............................................................................................................................. 4
Managing Servers -> All Actions ............................................................................................................... 4
Managing Servers...................................................................................................................................... 6
Managed System Advanced Options ........................................................................................................ 7
Partition Management .............................................................................................................................. 7
Partition Properties................................................................................................................................... 8
Serviceability Options ............................................................................................................................... 8
Capacity Upgrade On Demand.................................................................................................................. 9
Groups and Power Enterprise Pools ......................................................................................................... 9
Management of the HMC and Administration ......................................................................................... 9
Service Management/Serviceability ....................................................................................................... 10
 Code Update ........................................................................................................................................... 11
Enhanced GUI Advantages .......................................................................................................................... 11
Network Topology................................................................................................................................... 11
Storage Topology .................................................................................................................................... 12
Optional views for System and LPAR Objects ......................................................................................... 12

Box View ................................................................................................................................. 12

List View ................................................................................................................................... 13

Shortcuts to menus ................................................................................................................................. 13

Resources and Performance Dashboard....................................................................................... 13

Additional Information and firmware level.................................................................................... 13

Relational view ....................................................................................................................... 14

 Tasks Log ............................................................................................................................................. 14
Appendix: .................................................................................................................................................... 15
Demo....................................................................................................................................................... 15
Nigel's HMC 870 Enhanced GUI demo: ............................................................................................... 15
Techdocs for Enhanced GUI ................................................................................................................... 15
Dynamic Partitioning: ............................................................................................................................. 15
How to Dynamically Add/Remove Virtual Ethernet Adapters Using the New HMC "Enhanced" GUI 15
How to DLPAR Virtual Fibre Channel Adapters Using the HMC Enhanced GUI .................................. 15
Dumps: .................................................................................................................................................... 15
HMC V8 enhanced: Initiating a System Dump .................................................................................... 15
How to Initiate a Resource Dump from the HMC - V8 Enhanced GUI ................................................ 15
HMC Version 7 and later: Retrieving an FSP or System Dump Using the HMC .................................. 15
Performing a Main Storage Dump (MSD) on an HMC Managed Server ............................................. 15
User Roles: .............................................................................................................................................. 15
8 Enhanced: Creating a customerized task role to allow HMC 5250 Remote Console ...................... 15
Presentations and Developerworks ............................................................................................................ 15
HMC V8 R8.6.0 Enhanced UI Updates ........................................................................................................ 15
Synchronize Current Configuration and configuration change on inactive partition in HMC Enhanced
UI ......................................................................................................................................................... 15
Partition Virtual Storage Management using HMC Enhanced UI ....................................................... 15
Virtual Network Management with HMC Enhanced UI ...................................................................... 15
Introduction

This document describes the new Enhanced GUI interface navigation on the HMC released in Version 8
Release 8.2.0 and higher with mappings from the Classic GUI interface. These maps are provided for ease
of use when adapting to the new Enhanced GUI for quick searchability for equivalent menus. In addition,
Enhanced GUI unique navigation views, options and menus are also listed. The HMC at Version 8 Release
8.7.0 will be the first release of HMC to remove the Classic GUI completely. This new GUI transitions the
user into modern navigation using a different interaction model that not only provides a simplified
navigational path for completing virtualization management tasks, but also provides new functions that
are not available in the HMC Classic interface. The guide that follows outlines and highlights each of these
difference and new functional advantages.

Menus Available – Enhanced GUI Only

Enhanced GUI Path New Features

Resources -> All Systems -> Select <managed system> -> (Left Navigation)
^ Topology (View examples in the GUI screenshot section)
View Network Diagram (end to end of the managed system)
Virtual Storage Diagram (physical and virtual storage of the managed system)

Classic GUI to Enhanced GUI Mapping

Classic GUI Task Enhanced GUI Task

Decipher keys: Decipher keys:
+- = expandable menu ^ = expandable menu * 870 and higher menu ** Enhanced-Only
Left or Right Navigation noted for navigation locale or page load Left or Right Navigation noted for navigation locale or page load

Main Menu Navigation

Welcome Resources (Left Navigation)
+- Systems Management All Systems
Servers All Partitions
Frames All Virtual I/O Servers
+- Custom Groups All Frames
All Partitions All Shared Storage Pool Clusters
All Objects All Power Enterprise Pools
Power Enterprise Pools All Groups
System Plans HMC Management
HMC Management Console Settings
Service Management Console Management
Updates Templates and OS Images
All System Plans *
Updates
Users and Security
Users and Roles
Systems and Console Security
Serviceability
Tasks Log
Console Events Log
Serviceable Events Manager
Events Manager for Call Home
Service Management

Managing Servers -> All Actions

Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> ->
(Split lower window Navigation) + for All Actions ^Actions
Properties View System Partitions
+- Operations View System Properties
Power Off View Performance Dashboard
Power On Performance Data Collection
Power Management Turn On/Off
+- LED Status Export Data
Deactivate Attention LED Turn Attention LED Off...
Identify LED Scheduled Operations
Test LED Updates
Schedule Operations View System Information
Launch Advanced System Management (ASM) Change Licensed Internal Code ->
+- Utilization Data for the Current Release
Change Sampling Rate to a New Release
View Check System Readiness
Rebuild SR-IOV Firmware Update
Change Password Serviceable Event Manager ...
Update Password Reference Code Log ...
+- Configuration Reset or Remove System Connection
+- Create Partition View All Actions ->
AIX or Linux Operations ->
VIO Server Power Off
IBM i Power On
+- System Plans Power Management
Create Schedule Operations
Deploy Launch ASM
Partition Availability Priority Rebuild System
View Workload Management Groups Change System Password
Manage Custom Groups Attention LED ->
+- Manage Partition Data Turn Attention LED Off
Restore Identify Attention LED
Initialize Test Attention LED
Backup Connections ->
Delete Service Processor Status
Manage System Profiles Reset or Remove System Connection
+- Virtual Resources Disconnect another Management Console
Shared Processor Pool Management Templates ->
Virtual Storage Management Deploy System from Template
Virtual Network Management Create Partition from Template
Reserved Storage Device Pool Management Capture Configuration as Template
+- Connections with Physical I/O
Service Processor Status without Physical I/O
Reset or Remove Connections Updates ->
Disconnect Another Management Console View System Information
Add Managed System Change Licensed Internal Code
+- Hardware Information for the Current Release
+- Adapters to a New Release
Host Ethernet Check System Readiness
Host Channel SR-IOV Firmware Update
View Hardware Topology Legacy -> Partition Availability Priority/Manage
+- Updates System Profiles
Change Licensed Internal Code for the current release Manage Partition Data
Upgrade Licensed Internal Code to a new release Restore
Check System Readiness Initialize
View system information Backup
SR-IOV Firmware Update Delete
+- Serviceability
Manage Serviceable Events
Create Service Event
Reference Code History
+- Control Panel Functions
(20) Type, Model, Feature
+- Hardware
Prepare For Hot Repair/Upgrade
Exchange FRU
Power On/Off Unit
+- MES Tasks
Add Enclosure
Add FRU
Close MES
Open MES
Remove Enclosure
Remove FRU
Manage Dumps
Collect VPD
+- FSP Failover
 Setup
Initiate
+- Capacity On Demand (CoD)
Enter CoD Code
View History Log
+- Processor
View Capacity Settings
+- CUoD (permanent)
View Code Information
+- Trial CoD
Start
Stop
View Capacity Settings
View Code Information
+- PowerVM
Enter Activation Code
View History Log
View Code Information
+- Enterprise Enablement
Enter Activation Code
View History Log
View Code Information
+- Other Advanced Functions
Enter Activation Code
View History Log
View Code Information
Performance

Managing Servers
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Properties ^Properties
Performance General Settings
Migration, Power-On Parameters, Capabilities, Advanced Processor,
Memory, I/O
^Capacity
Performance Dashboard
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Operations ^System Actions
Power On ^Operations
Power Off Power On
Power Management Power Off
+- LED Status Power Management
Deactivate Attention LED Schedule Operations
Identify LED Launch Advanced System Management (ASM)
Test LED Rebuild System
Schedule Operations Change System Password
Launch Advanced System ^Attention LED
Management (ASM) Turn Attention :LED Off
Rebuild Identify Attention LED
Change Password Test Attention LED
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Operations ^Legacy
+- Utilization Data Utilization Data *
Change Sampling Rate Change Sampling Rate
View View
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Configuration ^ Partitions (Opens new pane to the right for navigation)
+- Create Partition Click right upper button "Create Partition"
AIX or Linux Create New Partition or Create using Templates hyperlink
VIO Server ^ Power VM
IBM i ^ Virtual I/O Servers (Opens new pane to the right for navigation)
+- System Plans Click right upper button "Create Virtual I/O Server"
Create Add VIOS Wizard
Deploy
Systems Management -> Servers -> <managed system> -> HMC Management -> All System Plans (Opens new pane to the right for
+- Configuration navigation)
+- System Plans Create
Create Import
Deploy Deploy
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Configuration ^Power VM
+- Virtual Resources Virtual I/O Servers
Shared Processor Pool Management Virtual Networks
Shared Memory Pool Management Virtual Storage
 Virtual Storage Management Hardware Virtualized I/O -> HEA/HCA
Virtual Network Management Reserved Storage Pool
Reserved Storage Device Pool Management Shared Processor Pool
Shared Memory Pool
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Partition Availability Priority ^Legacy
View Workload Management Groups Partition Availability Priority
Manage Custom Groups Manage System Profiles
+- Manage Partition Data Manage Partition Data
Restore Restore
Initialize Initialize
Backup Backup
Delete Delete
Manage System Profiles
Systems Management -> Servers -> <managed system> Resources -> All Systems -> No Selection (Right upper button)
+- Connections Connect Systems
Service Processor Status Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Reset or Remove Connections ^System Actions
Disconnect Another Management Console ^Connections
Add Managed System Service Processor Status
Reset or Remove System Connection
Disconnect another Management Console
Systems Management -> Servers -> <managed system> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Hardware Information ^Power VM
+- Adapters Hardware Virtualized I/O -> (Opens new pane to the right for navigation)
Host Ethernet -> Select Port -> Configure -> HEA -> Select Adapter -> Modify HEA Adapter ->
Speed/Duplex/MaxRecvPacketSz/Port Port Group MCS
GroupMCS/Promiscuous LPAR/Flow control enabled HEA Adapter Ports list -> right click on port -> Modify Port ->
Host Channel Dedicated/Speed/Duplex/Owner/MaxRecvPacketSz/Flow Control
View Hardware Topology HEA Adapter Ports list -> right click on port -> View Partitions
HCA -> Launch Manage Host Channel Adapters
To set Promiscuous Mode ->
Resources -> All Systems -> Select <managed system>
Select Partition/Select VIOS-> (Left Navigation)
^Virtual I/O
Hardware Virtualization -> HEA -> Select adapter ->
right click -> Modify Port OR Actions -> Modify port ->
Check or uncheck Dedicated Mode
Mac Address Settings and VLAN ID Settings
Hardware Virtualization -> HEA -> Select adapter ->
right click -> Remove Port OR Actions -> Remove port
Systems Management -> Servers -> <managed system> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Updates ^System Actions
Change Licensed Internal Code for the current release ^Updates
Upgrade Licensed Internal Code to a new release View System Information
Check system readiness Change Licensed Internal Code
View system information for the Current Release
SR-IOV Firmware Update to a New Release
Check System Readiness
SR-IOV Firmware Update

Managed System Advanced Options

Systems Management -> Servers -> <managed system> -> Select Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Managed System ->Properties ^Properties -> General Settings
Click Advanced tab Scroll to “Advanced”
Display advanced settings -> Barrier Synchronization Register (BSR)
Barrier Synchronization Register Huge Page Memory
Huge Page Memory Memory Mirroring
Memory Mirroring Processor Performance
Processor Performance Virtual Trusted Platform Module
Virtual Trusted Platform Module

Partition Management
Systems Management -> Servers -> <managed system> -> Select Resources -> All Systems -> Select <managed system> -> (Right Navigation)
Managed System -> (Right Navigation) Select Partition
Select Partition ^Partition Actions
Properties ^Operations
Change Default Profile Restart
+- Operations Shutdown
+- Activate Activate
Profile Schedule Operations
 Current Configuration Suspend Operations
Deactivate Attention LED Recover
Schedule Opeartions ^Console
Delete Open Terminal Window
+- Mobility Close Terminal Window
Migrate ^Templates
Validate Capture Partition as a Template
Recover ^Profiles
+- Suspend Operations Change Default Profile
Recover Manage Profiles
+- Configuration
Manage Profiles
Manage Custom Groups
Save Current Configuration
+- Hardware Information
+- Adapters
Host Channel
Host Ethernet
+- Dynamic Partitioning
+- Physical Adapters
Move or Remove
+- Console Window
Open Terminal Window
Close Terminal Connection
+- Serviceability
Manage Serviceable Events
Reference Code History

Partition Properties
Systems Management -> Servers -> <managed system> -> Select Resources -> All Systems -> Select <managed system> -> Partitions load
Managed System -> Select <partition name> -> Properties (Right Navigation)
General tab -> Select <partition name> -> Actions -> View Partition Properties
Allow performance information collection Virtualization Capabilities (Suspend/Resume)
Allow this partition to be suspended Remote Restart
Virtual Trusted Platform Module (VTPM) Click right upper box “Advanced”
Sync current configuration Capability Advanced Settings
Settings tab -> Enable Connection Monitoring
Boot Enable Redundant Error Path Reporting
Boot Mode Enable Time Reference
Keylock position Disable Migration
Automatically start with the managed system Service Partition
Service and support Maximum Virtual Adapters
Connection monitoring Save configuration changes to profile
Service partition Enable Performance Information Collection
Redundant error path reporting
Time reference
Other tab
Workload management
Partition workload group
Workload group
Power controlling partitions

Serviceability Options
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Serviceability -> Serviceability ->
Manage Serviceable Events Tasks Log
Create Service Event Serviceability (Opens new pane to the right for navigation)
Reference Code History View and Collect
Control Panel Functions Serviceable Events Manager
(20) Type, Model, Feature Create Serviceable Events
Manage Dumps Manage Dumps
Collect VPD Collect VPD
Control Panel Functions
(20) Type, Model, Feature
Reference Code Log
RIO Configuration
PCI Configuration
Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
Serviceability -> Serviceability -> Serviceability (Opens new pane to the right for navigation)
Hardware -> Hardware Operations
Prepare for Hot Repair/Upgrade Prepare for Hot Repair/Upgrade
 Exchange FRU Power On/Off Unit
Power On/Off Unit FRU Tasks
MES Tasks Add FRU
Add Enclosure Exchange FRU
Add FRU Remove FRU
Close MES Enclosure Tasks
Open MES Add Enclosure
Remove Enclosure Remove Enclosure
Remove FRU MES Tasks
FSP Failover Open MES
Setup Close MES
Initiate FSP Failover
Setup
Initiate

Capacity Upgrade On Demand

Systems Management -> Servers -> <managed system> -> Resources -> All Systems -> Select <managed system> -> (Left Navigation)
+- Capacity On Demand (CoD) ^ Capacity On Demand
Enter CoD Code CoD Functions (Opens new pane to the right for navigation)
View History Log Enter CoD Code
+- Processor View CoD History Log
View Capacity Settings Capacity On Demand Processor
+- CUoD (permanent) View Processor Settings
View Code Information CUoD (permanent) Processor
+- Trial CoD View CUoD Code Information
Stop/Start On/Off Processor
View Capacity Settings Manage
View Code Information View Billing Information
+- Memory View Capacity Settings
View Capacity Settings View Code Information
+- CUoD (permanent) Utility Processor
View Code Information Manage
+- Trial CoD View Capacity Settings
Stop/Start View Code Information
View Capacity Settings View Shared Processor Utilization
View Code Information Trial Processor
+- PowerVM Start/Stop Trial
Enter Activation Code View Capacity Settings
View History Log View Code Information
View Code Information Capacity On Demand Memory
+- Enterprise Enablement View Memory Settings
Enter Activation Code CUoD (permanent) Memory
View History Log View CUoD Code Information
View Code Information On/Off Memory
+- Other Advanced Functions Manage
Enter Activation Code View Billing Information
View History Log View Capacity Settings
View Code Information View Code Information
Utility Memory
Manage
View Capacity Settings
View Code Information
View Shared Processor Utilization
Trial Memory
Start/Stop Trial
View Capacity Settings
View Code Information
Licensed Capabilities

Groups and Power Enterprise Pools

Systems Management -> Servers -> Resources -> All Groups (Opens new pane to the right for navigation)
+- Custom Groups Click upper right button "Create a Group"
All Partitions
All Objects
Systems Management -> Servers -> Resources -> All Power Enterprise Pools (Opens new pane to the right for
Power Enterprise Pools navigation)
PEP Wizard for Create Pool and Pool Management >
Compliance/Total Mobile Resources/Available Mobile

Management of the HMC and Administration

HMC Management HMC Management
Operations Console Settings (Opens new pane to the right for navigation)
View Management Console Events Launch Guide Setup Wizard
 Shut Down or Restart Network Settings
Scheduled Operations View Network Topology
Format Media Test Network Connectivity
Back Up Management Console Data Change Network Settings
Restore Management Console Data Performance Settings
Save Upgrade Data Change Performance Monitoring Settings
Change Network Settings Other Settings
Test Network Connectivity Change Date and Time
View Network Topology Change Language and Locale
Tip of the Day Create Welcome Text
View Licenses Console Management (Opens new pane to the right for navigation)
Change Default User Interface Settings Management
Change User Interface Settings Shut Down or Restart the Management Console
Change Performance Monitoring Settings Schedule Operations
Change Date and Time View Licenses
Launch Guided Setup Wizard Update the Hardware Management Console
Administration Maintenance and Data
Change User Password Format Media
Manage User Profiles and Access Backup Management Console Data
Manage Task And Resource Roles Restore Management Console Data
Manage Users and Tasks Save Upgrade Data
Manage Certificates Manage Data Replication
Manage Certificate Revocation List Templates and OS Images (Opens new pane to the right for navigation)
Configure KDC System | Partition | OS and VIOS Images
Configure LDAP Import
Remote Command Execution Select template -> Action ->
Remote Virtual Terminal View/Edit/Copy/Delete/Deploy/Export
Remote Operation OS and VIOS Images
Change Language and Locale Manage Install Resource
Create Welcome Text Manage Virtual I/O Server Image
Manage Data Replication All System Plans * (Opens new pane to the right for navigation)
Manage Install Resources Create
Manage Virtual I/O Image Repository Import

HMC Management Users and Security

Administration Users and Roles (Opens new pane to the right for navigation)
Change User Password Users
Manage User Profiles and Access Change User Password
Manage Task And Resource Roles Manage User Profiles and Access
Manage Users and Tasks Manage Users and Tasks
Manage Certificates Roles
Manage Certificate Revocation List Manage Task and Resource Roles
Configure KDC Systems and Console Security
Configure LDAP Security Administration
Remote Command Execution Manage Certificates
Remote Virtual Terminal Manage Certificate Revocation List*
Remote Operation Manage LDAP
Manage KDC
Remote Control
Enable Remote Command Execution
Enable Remote Operation
Enable Remote Virtual Terminal

Service Management/Serviceability
Service Management Serviceability
Create Serviceable Event Tasks Log (New feature shows all the tasks and the status, initiator, start
Manage Serviceable Event time, duration (also viewable on the right hand menu under Tasks)
Events Manager for Call Home Console Events Log
Format Media Serviceable Events Manager (Manage Serviceable
Manage Dumps Events)
Transmit Service Information Events Manager for Call Home (Opens new pane to the right for
Connectivity navigation)
Enable Electronic Service Agent Manage Consoles
Manage Outbound Connectivity Event Criteria
Manage Inbound Connectivity Events
Manage Customer Information Service Management (Opens new pane to the right for navigation)
Authorize User Serviceability
Manage Serviceable Event Notification Create Serviceable Event
Manage Partition Connection Monitoring Manage Dumps
Electronic Service Agent Setup Wizard Transmit Service Information
Format Media
Connectivity
Electronic Service Agent Setup Wizard
 Authorize User
Enable Electronic Service Agent
Manage Outbound Connectivity
Manage Inbound Connectivity
Manage Customer Information
Manage Serviceable Event Notification
Manage Connection Monitoring

Code Update
Updates For HMC:
Update HMC HMC Management
Select <managed system> Console Management (Opens new pane to the right for navigation)
View system information Update the Hardware Management Console
Change Licensed Internal Code for the current release
Upgrade Licensed Internal Code to a new release For Managed Systems:
Check system readiness Resources -> All Systems -> Select <managed system> -> (Left Navigation)
System Actions -> Updates
(Each task below launches a new working window pop-up in classic GUI
format)
View System Information
Change Licensed Internal Code
for the Current Release
to a New Release
Check System Readiness
SR-IOV Firmware Update

Enhanced GUI Advantages

Network Topology
Storage Topology

Optional views for System and LPAR Objects

Box View
 List View

Shortcuts to menus

Resources and Performance Dashboard

Additional Information and firmware level

 Relational view

Tasks Log
Appendix:

Demo
Nigel's HMC 870 Enhanced GUI demo:
https://www.youtube.com/watch?v=RReXXDp4gxc&feature=youtu.be&cm_mc_uid=83274121593515029014082&cm_mc_sid_50200000=1502985391

Techdocs for Enhanced GUI

Dynamic Partitioning:
How to Dynamically Add/Remove Virtual Ethernet Adapters Using the New HMC "Enhanced" GUI
http://www-01.ibm.com/support/docview.wss?uid=nas8N1020484
How to DLPAR Virtual Fibre Channel Adapters Using the HMC Enhanced GUI
http://www-01.ibm.com/support/docview.wss?uid=nas8N1020483

Dumps:
HMC V8 enhanced: Initiating a System Dump
http://www-01.ibm.com/support/docview.wss?uid=nas8N1021886
How to Initiate a Resource Dump from the HMC - V8 Enhanced GUI
http://www-01.ibm.com/support/docview.wss?uid=nas8N1021901
HMC Version 7 and later: Retrieving an FSP or System Dump Using the HMC
http://www-01.ibm.com/support/docview.wss?uid=nas8N1014349
Performing a Main Storage Dump (MSD) on an HMC Managed Server
http://www-01.ibm.com/support/docview.wss?uid=nas8N1015896

User Roles:
8 Enhanced: Creating a customerized task role to allow HMC 5250 Remote Console
http://www-01.ibm.com/support/docview.wss?uid=nas8N1022222

Presentations and Developerworks

HMC V8 R8.6.0 Enhanced UI Updates

https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Power%20Systems/page/HMC%20V8%20R8.6.0%20Enhanced%20UI%20Updates
Synchronize Current Configuration and configuration change on inactive partition in HMC Enhanced UI
https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Power%20Systems/page/Synchronize%20Current%20Configuration%20and%20configuration%20change%20o
n%20inactive%20partition%20in%20HMC%20Enhanced%20UI
Partition Virtual Storage Management using HMC Enhanced UI
https://www.ibm.com/developerworks/community/wikis/home?lang=en_us#!/wiki/Power%20Systems/page/Partition%20Virtual%20Storage%20Management%20using%20HMC%20Enhance
d%20UI
Virtual Network Management with HMC Enhanced UI
https://www.ibm.com/developerworks/community/wikis/home?lang=en#!/wiki/Power%20Systems/page/Virtual%20Network%20Management%20with%20HMC%20Enhanced%20UI