0% found this document useful (0 votes)
80 views5 pages

Footing F1 PDF

This document provides calculations for the design of a concrete footing (F1) to support two columns. It includes input parameters such as load cases, material properties, and column geometry. Output data includes soil pressures, safety factors, reinforcement requirements, bending moments, and costs. Diagrams show the column layout and forces for two load cases. Reinforcement is required at the top and bottom of the footing to resist bending due to the eccentric column loads.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
80 views5 pages

Footing F1 PDF

This document provides calculations for the design of a concrete footing (F1) to support two columns. It includes input parameters such as load cases, material properties, and column geometry. Output data includes soil pressures, safety factors, reinforcement requirements, bending moments, and costs. Diagrams show the column layout and forces for two load cases. Reinforcement is required at the top and bottom of the footing to resist bending due to the eccentric column loads.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Job Number Sheet

Job Title
Software Consultants (Pty) Ltd
Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Column Base Design : FOOTING F1


C15
Input Data

Base length A (m) 5.5


Base width B (m) 1.5 Unfactored Loads
Column(s) Col 1 Col 2 Load Col LF LF P Hx Hy Mx My
C (m) 0.4 0.4 Case no. ULS ULS (kN) (kN) (kN) (kNm) (kNm)
D (m) 0.4 0.4 ovt
E (m) -2 2 4 1 1.6 1.6 -29
F (m) 0 0 2 1.6 1.6 35 23
Stub column height X (m) 0.05
Base depth Y (m) 0.5 5 1 1.6 1.6 39
Soil cover Z (m) 0.8 2 1.6 1.6 -33 -23
Concrete density (kN/m3) 25
Soil density (kN/m3) 18
Soil friction angle (°) 22
Base friction constant 0.5
Rebar depth top X (mm) 50
Rebar depth top Y (mm) 50
Rebar depth bottom X (mm) 50
Rebar depth bottom Y (mm) 50
ULS ovt. LF: Self weight 1
ULS LF: Self weight 1.2
Max. SLS bearing pr. (kN/m²) 100
S.F. Overturning (ULS) 1
S.F. Slip (ULS) 1.5
fcu base (MPa) 25
fcu columns (MPa) 25
fy (MPa) 450

Sketch of Base
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

BS8110 - 1997 Y
E2

C1
X
D1 D2
B

C2

E1
A
Y

Mx Mx
P P
Z

Hx
X
Y

Output for Load Case 4


Output for Load Case 4
Soil pressure (ULS)(kN/m²) 63.21
Soil pressure (SLS)(kN/m²) 46.24
SF overturning (SLS) 4.46
SF overturning (ULS) 2.83
Safety Factor slip (ULS) 5.44
Safety Factor uplift (ULS) >100
Bottom
Design moment X (kNm/m) 4.37
Reinforcement X (mm²/m) 24
Design moment Y (kNm/m) 0.18
Reinforcement Y (mm²/m) 1
Top
Design moment X (kNm/m) -12.97
Reinforcement X (mm²/m) 71
Design moment Y (kNm/m) -0.00
Reinforcement Y (mm²/m) 0
Linear Shear X (MPa) 0.007
vc (MPa) 0.336
Linear Shear Y (MPa) 0.000
vc (MPa) 0.336
Linear Shear Other (MPa) 0.018
Punching Shear (MPa) N.A.
vc (MPa) N.A.
Cost 1656.45
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd
Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Load Case:4 Legend


Max M (+)
BS8110 - 1997 Y Y Max M (-)
Max Shear
2.00 2.00

0.40 0.40
1.50

1.50
X X
0.40 0.40 0.40 0.40
0.40 0.40
-2.00 -2.00
5.50 5.50
Y Y

Mx Mx Mx Mx
P P P P
0.80

0.80
Hx 0.05 Hx 0.05
0.50 0.50

46.24 kN/m² 63.21 kN/m²


Soil Pressures at SLS Soil Pressures at ULS

Output for Load Case 5


Output for Load Case 5
Soil pressure (ULS)(kN/m²) 66.60
Soil pressure (SLS)(kN/m²) 48.35
SF overturning (SLS) 4.00
SF overturning (ULS) 2.54
Safety Factor slip (ULS) 5.44
Safety Factor uplift (ULS) >100
Bottom
Design moment X (kNm/m) 10.53
Reinforcement X (mm²/m) 58
Design moment Y (kNm/m) 0.18
Reinforcement Y (mm²/m) 1
Top
Design moment X (kNm/m) -4.49
Reinforcement X (mm²/m) 25
Design moment Y (kNm/m) 0.00
Reinforcement Y (mm²/m) 0
Linear Shear X (MPa) 0.008
vc (MPa) 0.336
Linear Shear Y (MPa) 0.000
vc (MPa) 0.336
Linear Shear Other (MPa) 0.016
Punching Shear (MPa) N.A.
vc (MPa) N.A.
Cost 1665.19
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Load Case:5 Legend


Max M (+)
BS8110 - 1997 Y Y Max M (-)
Max Shear
2.00 2.00

0.40 0.40
X X
1.50

1.50
0.40 0.40 0.40 0.40
0.40 0.40
-2.00 -2.00
5.50 5.50
Y Y

Mx Mx Mx Mx
P P P P
0.80

0.80
Hx Hx
0.05 0.05
0.50 0.50

48.35 kN/m² 66.60 kN/m²


Soil Pressures at SLS Soil Pressures at ULS
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd
Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Schematic reinforcement of Base

8Y14-C-200 (T1)
R10-F
8Y14-A-200 (B1) E E

E E
SECTION: col1
col1 col2
28Y14-B-200 (B2)
28Y14-D-200 (T2)

PLAN

4Y16-E 4Y16-G
R10-H
3R10-F 3R10-H G G

B B B B B B B B B B B B B B B B B B B B B B B B B B B B G G
SECTION: col2
SECTION

You might also like