Industrial Media Converter Ethernet to Fiber Media Converter v1.

1 / Nov, 2010

IMC-111FB / IMC-111PB
Industrial mini type Ethernet to fiber media converter with
1x10/100Base-T(X) to 1x100Base-FX fiber / 1x100Base-FX SFP socket
Features

͑‫͑ؼ‬Support 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X

2 ͑‫͑ؼ‬Support Ethernet to fiber or Ethernet to SFP port

͑‫͑ؼ‬Support LFP (Link Fault Pass-through) function
͑‫͑ؼ‬Support full/half duplex operation
Industrial Media Converter

͑‫͑ؼ‬Support store and forward transmission

͑‫͑ؼ‬Provide DIP-Switch to set functions
͑‫͑ؼ‬High reliability and rigid IP-30 housing
͑‫͑ؼ‬DIN-Rail and wall mounting enabled

Introduction

IMC-111 series are the cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, as they allow you to extend
communication distance by optical fiber. IMC-111 series support MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-111 series have
wide operating temperature range from -40 ~ 70°C and have dual power inputs, each accepting a wide voltage range from 12 ~ 48 VDC. Hence IMC-111
series are suitable for harsh operating environments.
IMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting
packets and waits for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, and then IMC-111 series will
force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore the
IMC-111 series are reliable media converters that can satisfy most demand of different operating environments.

Normal Status

One Line Broken without LFP : Server Keeps Waiting without Answers

Waiting

One Line Broken with LFP : Server Can Detect the Warning Event

Warning

Connections of Media Converter and LFP function

2-22 w w w.oring-netwo rk ing.com

Industrial Media Converter Ethernet to Fiber Media Converter v1.1 / Nov, 2010

Compan
Com panyy Info
Dimensions

2011 Prod
2011 Informa
rmatio
tionn
Overview
Product
uct
Vertical Market
Applications
Ethernet Switch
Industrial
Media Converter
Industrial
(Unit=mm)

Device Server
Industrial
Specifications

Industrial Wireless
Access Point
ORing Media Converter Model IMC-111FB-MM IMC-111FB-SS IMC-111PB

Physical Ports
10/100Base-T(X) Ports in RJ45
Auto MDI/MDIX 1 1 1

Industria
Indust
VPN Router
Fiber Ports

riall Cell
Fiber Ports Number 1 1 -
Cellula
ularr
Fiber Ports Standard 100Base - FX 100Base - FX -
Fiber Mode Multi-mode Single-mode -
USB-Ov
USB

62.5/125 μm
Fiber Diameter (μm) 9/125 μm -
O er-IP
Industrial

50/125 μm
Fiber Optical Connector SC SC -
IP Ser
S ver

Typical Distance (km) 2 km 30 km -

Fiber Ports Wavelength (nm) 1310 nm 1310 km -
Specifications Max. Output Optical -14 dBm -8 dBm -
Access
Acc

Power (dBm)
essori

Min. Output Optical -23.5 dBm -15 km -

ories

Power (dBm)
es

Max. Input Optical Power 0 dBm 0 dBm -

(Saturation)
Management Utility
M

Min. Input Optical Power -31 dBm -34 dBm -

(Sensitivity)
Network

Link Budget (dB) 7.5 dB 19 dB -

100Base-FX SFP port - - 1

D esigned for Rugged Excellence 2-23

 Industrial Media Converter Ethernet to Fiber Media Converter v1.1 / Nov, 2010

Technology
IEEE 802.3 for 10Base-T
Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
Processing Store-and-Forward
DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 100Mbps
DIP-Switch setting DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Full-Duplex / (OFF) Half-duplex
DIP-Switch 4 for fiber full/half duplex selection : (ON) Full-Duplex / (OFF) Half-Duplex
LED Indicators

2 Power Indicator

10/100Base-T(X) RJ45 Port Indicator

Green : Power LED x 2
Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
Industrial Media Converter

Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
100Base-FX Fiber Port Indicator
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Power
Input Power Dual 12~48 VDC power input at 4-pin terminal block
Power Consumption (Typ.) 2.2 Watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block

Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g) 218 g 218 g 213 g
Environmental
Storage Temperature -40 to 85°C(-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
EMS EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 5 years

2-24 w w w.oring-netwo rk ing.com

Industrial Media Converter Ethernet to Fiber Media Converter v1.1 / Nov, 2010

Compan
Com panyy Info
Ordering Information

Informa
rmatio
tionn
IMC-1 A B C B - DD - EE

2011 Prod
2011
Overview
Product
10/100Base-T(X)

uct
Code Definition Fiber Port Number Fiber Port Type Fiber Optical Mode Fiber Optical Connector
Port Number

- F : 100Base-FX - MM : Multi-mode
Option - 1 : 1 port - 1: 1 port - SC: SC Connector

Vertical Market
- P: 100Base-FX SFP - SS : Single-mode

Applications
Model Name Description

Ethernet Switch
Industrial mini type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, multi-mode, 2km/1310nm,
IMC-111FB-MM-SC

Industrial
SC connector
Available
Model Industrial min type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, single-mode, 30km/1310nm,
IMC-111FB-SS-SC SC connector

Media Converter
IMC-111PB Industrial mini type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket

Industrial
Packing List Optional Accessories
ΘIMC-111FB / 111PB ΘSFP100 series : 100Mbps SFP optical transceiver
ΘDIN-Rail Kit ΘDR-75 series : 75 Watts power supply
ΘWall-mount Kit ΘDR-45 series : 45 Watts power supply
ΘQuick Installation Guide ΘDR-120 series : 120 Watts power supply

Device Server
Industrial
Industrial Wireless
Access Point
Industria
Indust
VPN Router
riall Cell
Cellula
ularr
USB-Ov
USB O er-IP
Industrial
Access
Acc IP Ser
essoriS ver
ories
es
Management Utility
M
Network

D esigned for Rugged Excellence 2-25