Scribd
Upload
349 views501 pages

Ke01 00 000 KD P TD 0015 000 - D03

This document describes revisions made to a piping valve data sheet document. Revisions include adding and removing valve data sheets, updating material specifications, design temperatures, pressure ratings, and classes on various valve data sheets. Highlights include adding ball and globe valves for high temperature service and fugitive emission requirements, updating index and data sheets with new ball and check valves, and changing trim materials on some valves to meet requirements.

Uploaded by

Maffone Numerouno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
349 views501 pages

Ke01 00 000 KD P TD 0015 000 - D03

This document describes revisions made to a piping valve data sheet document. Revisions include adding and removing valve data sheets, updating material specifications, design temperatures, pressure ratings, and classes on various valve data sheets. Highlights include adding ball and globe valves for high temperature service and fugitive emission requirements, updating index and data sheets with new ball and check valves, and changing trim materials on some valves to meet requirements.

Uploaded by

Maffone Numerouno
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 501

Agip KCO KE01.00.000.KD.P.TD.0015.

000
KDPC Rev D03 Jul 2005

REVISION DESCRIPTION SHEET

Rev. Para. Revision Description


P00 Issued for Internal Review.
P01 Issued for Client Review.
F01 Issued for FEED
F02 Issued for FEED under new Document Number. Originally the document was issued under
KE01.00.000.KD.P.ST.0015.000 from Rev P00 to F01 inc.
High temperature ball valves, Instrument isolation (DBB) valves and valves for 6mm CA
piping classes (*17) added.
Fugitive emission requirements added to all process ball and globe valves.
D01 Approved for Detailed Design, revised as indicated
Para 3.1 – Piping Project Material specification number corrected
INDEX
Ball Valve Index Reduced Bore – VBA3050 rating was 150#
- VBA9081 DELETED & Top entry BW valves added
Ball Valve Index Full Bore – VBA3150 rating was 150#
- VBA9181 DELETED & Top entry BW valves added

VALVE DATA SHEETS


Valve data sheet VBA1610 – End connection was 300#
Valve data sheet VBA1630 – class A18 deleted,
Valve data sheets VBA6037 and VBA6117 – class C82 added
Valve data sheets VBA: 67**, 97**, 157**, 257**, 69**, 99**, 159**, 259** Top entry BW
added. VBA9081 & 9181 deleted
In all VBB data sheets, in Description added (1/2” FB)
In all VDB data sheets, in Description added-
“Bore size 10mm min. At the flange bore to be nominal size”
Valve data sheets VDB 100080, 150080 & 150081 in Description added-
Vent valves. In End connection. added flange details
Valve data sheet VDB150080 – 3” size deleted
Valve data sheets VG150080, VGL15080 and VC15080, material changed to F22
Valve data sheets VG150081, VGL15081 and VC15081, des. temp. was –60°C
D02 Summary of Changes:
DATA SHEETS
VBA1020 Design temp. was +50 °C
VBA1021 Design temp. was +150 °C
VBA1022 FE requirement and Note 8 added
VBA1040 Design temp. was +100 °C
VBA3038 Min. Design temp. was -40 °C
VBA1120 Design temp. was +50 °C
VBA1121 Design temp. was +150 °C
Rev. Para. Revision Description

Piping Valve Data Sheets Sheet 2 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

D02 VBA3138 Min. Design temp. was -40 °C


Cont VBY1010 Class A29 deleted
VBY1010 Class A29 deleted
EX3000
VBY3010 Rating and general description revised
VG6050 Class C25 added. Design Temp. was +250 °C
VG6070 Class C25 added. Design Temp. was +300 °C
VG8056 Bolting material was L7M/7M
VGL Class A63 added
1017/1037
VGL1030 Class A65 added, size range increased
VGL1041 Size increased to 10”
VGL3030 Size increased to 10”
VGL6010 Class C18 added
VGL6030 Class C25 & C65 added
VC6017 Class C82 added
VC6037 Class C82 added
VDB3515 Class A17 deleted
VDB6015 Class C17 deleted
VDB6017 Class C17 deleted
VDB6515 Class C17 deleted
VDB6517 Class C17 deleted
VDB15015 Class D17 deleted
VDB15017 Class D17 deleted
Various ENP of 75µm added to ball & stem in the following VBA data sheets:
VBA’s
1030,1035,1050,3030,3035,3050,6030,6035,6050,6730,6750,9030,9035,9050,9730,9750
15030, 15035,15730,15735,25030,25035,25730,25735
1130,1135,1150,3130,3135,3150,6130,6135,6150,6930,6950,9130,9135,9150,9930,9950
15130,15135,15930,15935,25130,25135,25930,25935
Various DBB deleted from description in the following VBA data sheets:
VBA’s
3010,3015,3017,3022,3110,3115,3117,3122
Various Ball design was trunion mounted for 15110,15115 & 15117
VBA’s
Various 1010 – A29, A81 deleted
VBY’s
1010EX3000 – A29 deleted
3010 – design code and end connections revised

Various 6050, 6070 – C25 added, design temp. was 250C


VG’s
8056 – bolting material corrected

Piping Valve Data Sheets Sheet 3 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

Rev. Para. Revision Description


D02 Various Stellited faced seat added to the following VGL data sheets: 1038,3038,6038,9038
Cont VGL’s
1030 – A65 added, 1041& 3030 – size range increased, 6010 – C18 added,
6030 – C18, C25 & C65 added
6017 & 6037 – C82 added, 15030 – D11, D13 & D65 added
VDB3017 Class A63 added
Various Flange bore requirement removed for all sizes except 2” for the following:
VDB’s
3010,3015,3017,3018,3019,3021,3022,3510,3515,3517,3521,3522,6010,6015,6017,6021,
6022,6510,6515,6517,6522,15010,15015,15017,15021,15022
Various Note 8 on Weld overlay added to the following VDB data sheets:
VDB’s
3022,6022,15022
Various 17-4 PH deleted from Materials description for the following VDB data sheets:
VDB’s
3510,3515,3521,6510,6515
6015, 6017 & 6517 – C17 deleted, 15015 & 15017 – D17 deleted
Various HP Design temp. was –40 °C, and Note 8 modified in the following data sheets:
valves
VG100080, VG150081, VGL100080, VGL150081, VC100080, VC150081,
VDB100080, VDB150081
Design temp. was –40 °C, and Note 1 modified in the following data sheets:
VG150080, VGL150080, VC150080, VDB150080
Various The following new data sheets have been added:
valves
VBA’s –
6731,6739,6740,6751,8015,9530,9731,9739,9740,9751,6931,6939,6940,6951,
9630,9931,9939,9941,9951,15510,15610

VDB’s-
3110,3115,3117,3121,3122,3610,3615,3621,3622,6050,6090,6110,6115,6117,6121,6122,
6610,6622,15110,15115,15117,15121,15122, 15510,15610, 100081

VBY1011, VG6051
D03 Summary of Changes:
DATA SHEETS
VBA1020, VBA1120 – Size range extended
VBA6135 – End connection corrected to read flanged, was BW
VBY1011 – EEMUA rating added to design and flange, VBY1020EX3000 LTCS deleted
VC1020 - Size range extended
VC3041 – Rating was 300#
VGL1030, VGL1037 & VGL6030 - Size range extended
VDB3015 – Class A17/B17 deleted
VDB150080 – Material of construction updated to F22 mod.
VDB150081 – Size range changed
VP1010 – Revised sleeve material, FE added & size range extended

Piping Valve Data Sheets Sheet 4 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

Rev. Para. Revision Description


D03 VBA1040, VBY3010, VGL1040, VC1040 & VC3041 – Firewater added to Service
Cont
Various The following new data sheets have been added:
valves
VBY’s – 1030, 1035, 1039, 3035
VG’s – 1010, 1030, 3010, 3030, 100081,100082,150083
VGL – 100081,100082,150081,150083
VC’s – 100082, 100083, 150082, 150083
VDB’s - 3011, 3023, 3511, 6011, 100082,100083,150082,150083

Various The following data sheets have been revised to change the trim material (stem and or ball)
valves to comply with requirements of NACE MR0175 2003 edition.

VBA’s 1010,1022,1030,1050,1510,1522,1530,1550,3010,3022,3030,3050,3510,3530,6010,6022,
6030,6050,6510,6522,6530,6550,6730,6731,6750,6751,9030,9050,9530,9730,9731,9750,
9751,15010,15022,15030,15510,15730,25030,25730
1110,1122,1130,1150,1610,1622,1630,1650,3110,3122,3130,3150,3610,3630,6110,6122,
6130,6150,6610,6622,6630,6650,6930,6931,6950,6951,9130,9150,9630,9930,9931,9950,
9951,15110,15122,15130,15610,15930,25110,25130,25930
VBY’s 1030,1039 (these have been revised since advance copy issue)
VG’s 1010,1030,3010,3030 (these have been revised since advance copy issue)
VGL’s 1010,1019,1030,1039,3010,3019,3030,3039,6010,6019,6030,6039,9030,9039,15010,
15019,15030,25010,25030
VC’s 1030,3039,3030,3039,6030,6039,9030,903915030,25030
VBB’s 15010,25010
VDB’s 3010,3022,3022,3510,6010,6022,6510,6522,15010,15022,15110,15122,25010
3110,3122,3610,3622,6110,6122,6610,6622,15110,15122
3011,3023,3511,6011 (these have been revised since advance copy issue)
Various VG150081, VGL150081, VC150081, VDB150081 – Note 9 2“ ID changed
valves

3.5 to 3.8 New notes 3.5 to 3.8 added to General Notes section

Hold
Para. Description of Hold
No.

Piping Valve Data Sheets Sheet 5 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

TABLE OF CONTENTS

1. INTRODUCTION
1.1 PURPOSE
1.2 DEFINITIONS

2. CODES, STANDARDS, REGULATIONS AND REFERENCES


2.1 CODES, STANDARDS, REGULATIONS AND REFEREFENCES

3. GENERAL NOTES

ATTACHMENTS

ATTACHMENT 1 PIPING VALVE DATA SHEETS (REVISION RECORD)


ATTACHMENT 2 PIPING VALVE DATA SHEETS (INDEX)
ATTACHMENT 3 PIPING VALVE DATA SHEETS

Piping Valve Data Sheets Sheet 6 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

1. INTRODUCTION

This document covers the minimum requirements for the design and selection of valves for piping systems
designed for installation on the AGIP KCO Kashagan Field Development Project.

The document together with the purchase order, design data sheets, specific project engineering standards
and related international and industry standards cover the requirements for valves.

This specification includes additional valve data sheets as follows:

a) For actuated valves referred to in the schedule of on/off valves, the valve part is covered by data sheets
attached.
b) Valves tagged with SP numbers

Systems Excluded:

Instrument control valves.


Pipeline Valves.

1.1 PURPOSE

The purpose of this document is to provide a single reference point that specifies the design and selection of
valves for offshore and onshore application.
Pipeline valves are covered by specifications KE01.C0.000.KD.L.SF.0002.000 and
KE01.C0.000.KD.L.SF.0003.000.

1.2 DEFINITIONS

The following terms and definition will be used in the specification.

The COMPANY is the party that initiates the project and ultimately pays for its design and construction. The
Company will generally specify the technical requirements. The Company may also include an agent or
consultant authorised to act for, and on behalf of, the Company.

The CONTRACTOR is the party that carries out all or part of the design, engineering, procurement,
construction, commissioning or management of a project, or operation or maintenance of a facility. The
Company may undertake all or part of the duties of the Contractor.

The SUPPLIER (MANUFACTURER / VENDOR) is the party that manufactures or supplies equipment and
services to perform the duties specified by the Company or Contractor.

The word shall indicates a requirement.

The word should indicates a recommendation.

2. CODES, STANDARDS, REGULATIONS AND REFERENCES

2.1 CODES, STANDARDS, REGULATIONS AND REFEREFENCES

2.1.1 In conjunction with this Specification, the Codes, Standards, Regulations and References listed below shall
be applicable. Equivalent alternatives may be offered, however these shall be identified and based on
mutual agreement with Company.

2.1.2 PROJECT SPECIFICATIONS

KE01.00.000.KD.P.ST.0001.000 Piping Project Material Specification


KE01.00.000.KD.P.ST.0014.000 Technical Supply Requirements for Valves (excluding pipeline)
KE01.C0.000.KD.L.SF.0002.000 Plug Valve Specification (pipeline only)
KE01.C0.000.KD.L.SF.0003.000 Ball Valve Specification (pipeline only)

Piping Valve Data Sheets Sheet 7 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

2.1.3 ABBRIVIATIONS

The following abbreviations are used in this document:

API American Petroleum Institute


ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
BS British Standard
EN Euro Norm
ISO International Standards Organisation
MSS Manufacturers Standardisation Society
NACE National Association of Corrosion Engineers
NB Nominal Bore
NPS Nominal Pipe Size
NPT National Pipe Thread
PMI Positive Material Identification
PWHT Post Weld Heat Treatment
RTJ Ring Type Joint
UN Unified Inch
UNC Unified Inch Coarse
WT Wall Thickness

3. GENERAL NOTES

3.1 This document shall be read in conjunction with Piping Project Material Specification
KE01.00.000.KD.P.ST.0001.000 for piping design purposes.

3.2 The material specifications contained within this document are the minimum that can be accepted for the
service conditions. Material, equal to or better than those listed will be technically and commercially reviewed.

3.3 For valve purchasing purposes, this document shall be read in conjunction with Specification for Technical
Supply Requirements – Valves, KE01.00.000.KD.P.ST.0014.000 and the purchase requisition.

3.4 For pipeline design code valves refer to specification KE01.C0.000.KD.L.SF.0002.000 and
KE01.C0.000.KD.L.SF.0003.000.
3.5 For class *04 and *15 where 316SS is specified, the engineering limits are as stated in the Material
Selection Report KE01.B0.000.KD.V.RT.0002.000

3.6 For LTCS valves where corrosion allowance is not stated, vendor to confirm that 3 mm CA can be
accommodated with a fully functioning valve.

3.7 Requirement for ENP on stem materials, which are supplied in compliance with NACE MR0175 2003
edition, is to be advised by the Supplier based on selected material hardness.

3.8 Where sour service requirement NACE MR0175 is specified, valve materials shall meet the H2S partial
pressure limits of 2003 edition. Due to the extremely high proportion of H2S within the Kashagan process
(typically 18 mol%), many standard austenitic, martensitic, duplex and ferritic stainless steel alloys (e.g.
UNS S32750, 17-4PH etc.) are not acceptable to NACE and typically nickel alloys are required for this
service. The Engineering Contractor is responsible for ensuring material compliance to NACE MR0175
(2003), further details are provided within overall facility Material Selection Report
KE01.B0.000.KD.V.RT.0002.000.

Piping Valve Data Sheets Sheet 8 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

ATTACHMENT 1

PIPING VALVE DATA SHEETS (Revision Records)

Note: -

The revision numbers for individual data sheets is set different from the main document revision numbers.
This is to facilitate issue of revised data sheets. With this system only revised data sheets need issuing rather than
all the data sheets listed.

For requisitioning purposes, only the Data Sheets for items listed in the requisition will be issued together with the
front sheets of this document.

Ball valve Reduced Bore


Ball valve Full Bore
Ball valve Top Entry
Butterfly Valve
Gate Valve
Globe Valve
Check Valve
Miscellaneous Valves (DBB etc)

Piping Valve Data Sheets Sheet 9 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Ball Valves Reduced Bore

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBA1010 - Nov 02 29/09/03 01/07/05
VBA1015 Nov 02 28/02/03 29/09/03
VBA1016 Nov 02 DELETED
VBA1017 Nov 02 28/02/03 29/09/03
VBA1018 - 28/02/03 29/09/03
VBA1019 - 28/02/03 29/09/03
VBA1020 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA1021 - 28/02/03 29/09/03 01/01/05
VBA1022 - - 29/09/03 01/01/05 01/07/05
VBA1030 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA1035 Nov 02 28/02/03 29/09/03 01/01/05
VBA1036 Nov 02 DELETED
VBA1037 Nov 02 28/02/03 29/09/03
VBA1038 - 28/02/03 29/09/03
VBA1040 - Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA1050 - - 29/09/03 01/01/05 01/07/05
VBA1510 - - 29/09/03 01/07/05
VBA1515 - - 29/09/03
VBA1517 - - 29/09/03
VBA1521 - - 29/09/03
VBA1522 - - 29/09/03 01/07/05
VBA1530 - - 29/09/03 01/07/05
VBA1535 - - 29/09/03
VBA1537 - - 29/09/03
VBA1538 - - 29/09/03
VBA1550 - - 29/09/03 01/07/05
VBA3010 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA3015 Nov 02 28/02/03 29/09/03 01/01/05
VBA3016 Nov 02 DELETED
VBA3017 Nov 02 28/02/03 29/09/03 01/01/05
VBA3021 - 28/02/03 29/09/03
VBA3022 - - 29/09/03 01/01/05 01/07/05
VBA3030 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA3035 Nov 02 28/02/03 29/09/03 01/01/05
VBA3036 Nov 02 DELETED
VBA3037 Nov 02 28/02/03 29/09/03
VBA3038 - 28/02/03 29/09/03 01/01/05
VBA3050 - - 29/09/03 01/01/05 01/07/05
VBA3080 Nov 02 DELETED
VBA3081 Nov 02 DELETED
VBA3082 Nov 02 DELETED
VBA3083 Nov 02 DELETED
VBA3084 Nov 02 DELETED
VBA3510 - - 29/09/03 01/07/05
VBA3530 - - 29/09/03 01/07/05
VBA6010 - Nov 02 29/09/03 01/07/05
VBA6015 Nov 02 28/02/03 29/09/03
VBA6016 Nov 02 28/02/03 DELETED
VBA6017 Nov 02 - 29/09/03
VBA6021 - 28/02/03 29/09/03
VBA6022 - - 29/09/03 01/07/05
VBA6030 - Nov 02 29/09/03 01/01/05 01/07/05
VBA6035 Nov 02 28/02/03 29/09/03 01/01/05
VBA6036 Nov 02 28/02/03 DELETED

Piping Valve Data Sheets Sheet 10 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD (Contd)

Ball Valves Reduced Bore

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBA6037 - - 29/09/03 30/06/04
VBA6038 - 28/02/03 29/09/03
VBA6050 - - 29/09/03 01/01/05 01/07/05
VBA6510 - - 29/09/03 01/07/05
VBA6515 - - 29/09/03
VBA6517 - - 29/09/03
VBA6522 - - 29/09/03 01/07/05
VBA6530 - - 29/09/03 01/07/05
VBA6535 - - 29/09/03
VBA6537 - - 29/09/03
VBA6550 - - 29/09/03 01/07/05
VBA6730 30/06/04 01/01/05 01/07/05
VBA6731 01/01/05 01/07/05
VBA6737-C28 30/06/04
VBA6737-C31 30/06/04
VBA6737-C82 30/06/04
VBA6738 30/06/04
VBA6739 01/01/05
VBA6740 01/01/05
VBA6750 30/06/04 01/01/05 01/07/05
VBA6751 01/01/05 01/07/05
VBA8015 01/01/05
VBA8080 Nov 02 DELETED
VBA9030 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA9035 Nov 02 28/02/03 29/09/03 01/01/05
VBA9036 Nov 02 28/02/03 DELETED
VBA9037 Nov 02 28/02/03 29/09/03
VBA9038 - 28/02/03 29/09/03
VBA9050 - - 29/09/03 01/01/05 01/07/05
VBA9080 Nov 02 DELETED
VBA9081 Nov 02 28/02/03 29/09/03 DELETED
VBA9082 Nov 02 DELETED
VBA9083 Nov 02 DELETED
VBA9084 Nov 02 DELETED
VBA9085 Nov 02 DELETED
VBA9086 Nov 02 DELETED
VBA9087 Nov 02 DELETED
VBA9530 01/01/05 01/07/05
VBA9730 30/06/04 01/01/05 01/07/05
VBA9731 01/01/05 01/07/05
VBA9737-D28 30/06/04
VBA9737-D31 30/06/04
VBA9737-D82 30/06/04
VBA9738 30/06/04
VBA9739 01/01/05
VBA9740 01/01/05
VBA9750 30/06/04 01/01/05 01/07/05
VBA9751 01/01/05 01/07/05
VBA15010 Nov-02 28/02/03 29/09/03 01/07/05
VBA15015 Nov-02 28/02/03 29/09/03
VBA15016 Nov-02 28/02/03 DELETED
VBA15017 Nov-02 28/02/03 29/09/03
VBA15021 - 28/02/03 29/09/03
VBA15022 - - 29/09/03 01/07/05

Piping Valve Data Sheets Sheet 11 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD (cont’d)

Ball Valves Reduced Bore

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBA15030 Nov-02 28/02/03 29/09/03 01/01/05 01/07/05
VBA15035 Nov-02 28/02/03 29/09/03 01/01/05
VBA15080 Nov-02 DELETED
VBA15081 Nov-02 DELETED
VBA15082 Nov-02 DELETED
VBA15083 Nov-02 DELETED
VBA15084 Nov-02 DELETED
VBA15510 01/01/05 01/07/05
VBA15730 30/06/04 01/01/05 01/07/05
VBA15735 30/06/04 01/01/05
VBA25010 Nov-02 28/02/03 DELETED
VBA25015 Nov-02 28/02/03 DELETED
VBA25030 Nov-02 28/02/03 29/09/03 01/01/05 01/07/05
VBA25035 Nov-02 28/02/03 29/09/03 01/01/05
VBA25730 30/06/04 01/01/05 01/07/05
VBA25735 30/06/04 01/01/05

Piping Valve Data Sheets Sheet 12 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Ball Valves Full Bore

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBA1110 - 28/02/03 29/09/03 01/07/05
VBA1115 - 28/02/03 29/09/03
VBA1117 - 28/02/03 29/09/03
VBA1118 - 28/02/03 29/09/03
VBA1119 - 28/02/03 29/09/03
VBA1120 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA1121 - 28/02/03 29/09/03 01/01/05
VBA1122 - - 29/09/03 01/07/05
VBA1130 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA1135 - 28/02/03 29/09/03 01/01/05
VBA1137 - 28/02/03 29/09/03
VBA1138 - 28/02/03 29/09/03
VBA1140 - 28/02/03 29/09/03
VBA1150 - - 29/09/03 01/01/05 01/07/05
VBA1610 - - 29/09/03 30/06/04 01/07/05
VBA1615 - - 29/09/03
VBA1617 - - 29/09/03
VBA1621 - - 29/09/03
VBA1622 - - 29/09/03 01/07/05
VBA1630 - - 29/09/03 30/06/04 01/07/05
VBA1635 - - 29/09/03
VBA1637 - - 29/09/03
VBA1638 - - 29/09/03
VBA1650 - - 29/09/03 01/07/05
VBA3110 - - 29/09/03 01/01/05 01/07/05
VBA3115 - - 29/09/03 01/01/05
VBA3117 - - 29/09/03 01/01/05
VBA3121 - 28/02/03 29/09/03
VBA3122 - - 29/09/03 01/01/05 01/07/05
VBA3130 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA3135 - 28/02/03 29/09/03 01/01/05
VBA3137 - 28/02/03 29/09/03
VBA3138 - 28/02/03 29/09/03 01/01/05
VBA3150 - - 29/09/03 01/01/05 01/07/05
VBA3610 - - 29/09/03 01/07/05
VBA3630 - - 29/09/03 01/07/05
VBA6110 - - 29/09/03 01/07/05
VBA6115 - 28/02/03 29/09/03
VBA6116 - 28/02/03 DELETED
VBA6117 - - 29/09/03 30/06/04
VBA6121 - 28/02/03 29/09/03
VBA6122 - - 29/09/03 01/07/05
VBA6130 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA6135 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA6136 - 28/02/03 DELETED
VBA6137 - - 29/09/03
VBA6138 - 28/02/03 29/09/03
VBA6150 - - 29/09/03 01/01/05 01/07/05
VBA6610 - - 29/09/03 01/07/05
VBA6615 - - 29/09/03
VBA6617 - - 29/09/03
VBA6622 - - 29/09/03 01/07/05
VBA6630 - - 29/09/03 01/07/05
VBA6635 - - 29/09/03

Piping Valve Data Sheets Sheet 13 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD (Contd)

Ball Valves Full Bore

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBA6650 - - 29/09/03 01/07/05
VBA6930 30/06/04 01/01/05 01/07/05
VBA6931 01/01/05 01/07/05
VBA6937-C28 30/06/04
VBA6937-C31 30/06/04
VBA6937-C82 30/06/04
VBA6938 30/06/04
VBA6939 01/01/05
VBA6940 01/01/05
VBA6950 30/06/04 01/01/05 01/07/05
VBA6951 01/01/05 01/07/05
VBA9130 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VBA9135 Nov 02 28/02/03 29/09/03 01/01/05
VBA9136 Nov 02 28/02/03 DELETED
VBA9137 Nov 02 28/02/03 29/09/03
VBA9138 - 28/02/03 29/09/03
VBA9150 - - 29/09/03 01/01/05 01/07/05
VBA9181 Nov 02 28/02/03 29/09/03 DELETED
VBA9630 01/01/05 01/07/05
VBA9930 30/06/04 01/01/05 01/07/05
VBA9931 01/01/05 01/07/05
VBA9935 30/06/04 DELETED
VBA9937-D28 30/06/04
VBA9937-D31 30/06/04
VBA9937-D82 30/06/04
VBA9938 30/06/04
VBA9939 01/01/05
VBA9941 01/01/05
VBA9950 30/06/04 01/01/05 01/07/05
VBA9951 01/01/05 01/07/05
VBA15110 Nov-02 28/02/03 29/09/03 01/01/05 01/07/05
VBA15115 Nov-02 28/02/03 29/09/03 01/01/05
VBA15116 - 28/02/03 DELETED
VBA15117 - 28/02/03 29/09/03 01/01/05
VBA15121 - 28/02/03 29/09/03
VBA15122 - - 29/09/03 01/07/05
VBA15130 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA15135 - 28/02/03 29/09/03 01/01/05
VBA15610 01/01/05 01/07/05
VBA15930 30/06/04 01/01/05 01/07/05
VBA15935 30/06/04 01/01/05
VBA25110 - 28/02/03 29/09/03 01/07/05
VBA25115 - 28/02/03 29/09/03
VBA25130 - 28/02/03 29/09/03 01/01/05 01/07/05
VBA25135 - 28/02/03 29/09/03 01/01/05
VBA25930 30/06/04 01/01/05 01/07/05
VBA25935 30/06/04 01/01/05

Piping Valve Data Sheets Sheet 14 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Butterfly Valves

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBY1080 X DELETED
VBY1010 - Nov 02 28/02/03 29/09/03 01/01/05
VBY1011 01/01/05 01/07/05
VBY1010EX3000 - Nov 02 28/02/03 29/09/03 01/01/05
VBY1020EX3000 - 29/09/03 -
VBY1030 01/07/05
VBY1035 01/07/05
VBY1039 01/07/05
VBY1530 01/07/05
VBY3010 - 28/02/03 29/09/03 01/01/05 01/07/05
VBY3035 01/07/05

Piping Valve Data Sheets Sheet 15 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Gate Valves

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VG1010 01/07/05
VG1030 01/07/05
VG1040 Nov 02 28/02/03 29/09/03
VG1041 Nov 02 28/02/03 29/09/03
VG1050 Nov 02 28/02/03 29/09/03
VG1055 Nov 02 28/02/03 29/09/03
VG1060 - Nov 02 29/09/03
VG1060EX3000 - Nov 02 29/09/03
VG1065 - Nov 02 29/09/03
VG1070 Nov 02 28/02/03 29/09/03
VG1160 Nov 02 28/02/03 29/09/03
VG3010 01/07/05
VG3030 01/07/05
VG3050 Nov 02 28/02/03 29/09/03
VG3055 Nov 02 28/02/03 29/09/03
VG3060 Nov 02 28/02/03 29/09/03
VG3065 Nov 02 28/02/03 29/09/03
VG3070 Nov 02 28/02/03 29/09/03
VG6050 Nov 02 28/02/03 29/09/03 01/01/05
VG6051 01/01/05
VG6055 Nov 02 28/02/03 29/09/03
VG6060 Nov 02 28/02/03 29/09/03
VG6065 Nov 02 28/02/03 29/09/03
VG6070 Nov 02 28/02/03 29/09/03 01/01/05
VG6090 - - 29/09/03
VG8050 - Nov 02 29/09/03
VG8051 Nov 02 28/02/03 29/09/03
VG8052 - Nov 02 29/09/03
VG8055 Nov 02 28/02/03 29/09/03
VG8056 Nov 02 28/02/03 29/09/03 01/01/05
VG8057 - Nov 02 29/09/03
VG8090 - - 29/09/03
VG8091 - - 29/09/03
VG8092 - - 29/09/03
VG8150 Nov 02 28/02/03 29/09/03
VG8151 Nov 02 28/02/03 29/09/03
VG8152 Nov 02 28/02/03 29/09/03
VG9060 Nov 02 28/02/03 29/09/03
VG9065 Nov 02 28/02/03 29/09/03
VG9070 Nov 02 28/02/03 29/09/03
VG15050 Nov 02 28/02/03 29/09/03
VG15055 Nov 02 28/02/03 29/09/03
VG100080 Nov 02 28/02/03 29/09/03 01/01/05
VG100081 01/07/05
VG100082 01/07/05
VG150080 Nov 02 28/02/03 29/09/03 30/06/04 01/01/05
VG150081 - - 29/09/03 30/06/04 01/01/05 01/07/05
VG150083 01/07/05

Piping Valve Data Sheets Sheet 16 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Globe Valves

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VGL1010 Nov 02 28/02/03 29/09/03 01/07/05
VGL1015 Nov 02 28/02/03 29/09/03
VGL1016 Nov 02 DELETED
VGL1017 Nov 02 28/02/03 29/09/03
VGL1018 - 28/02/03 29/09/03
VGL1019 - - 29/09/03 01/07/05
VGL1030 - Nov 02 29/09/03 01/01/05 01/07/05
VGL1035 - Nov 02 29/09/03
VGL1036 Nov 02 DELETED
VGL1037 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VGL1038 - 28/02/03 29/09/03 01/01/05
VGL1039 - - 29/09/03 01/07/05
VGL1040 Nov 02 28/02/03 29/09/03 01/07/05
VGL1041 Nov 02 28/02/03 29/09/03 01/01/05
VGL1160 Nov 02 28/02/03 29/09/03
VGL1080 Nov 02 DELETED
VGL3010 Nov 02 28/02/03 29/09/03 01/07/05
VGL3015 Nov 02 28/02/03 29/09/03
VGL3016 Nov 02 DELETED
VGL3017 Nov 02 28/02/03 29/09/03
VGL3018 - 28/02/03 29/09/03
VGL3019 - - 29/09/03 01/07/05
VGL3030 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VGL3035 Nov 02 28/02/03 29/09/03
VGL3036 Nov 02 DELETED
VGL3037 Nov 02 28/02/03 29/09/03
VGL3038 - 28/02/03 29/09/03 01/01/05
VGL3039 - - 29/09/03 01/07/05
VGL3080 Nov 02 DELETED
VGL6010 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VGL6015 Nov 02 28/02/03 29/09/03
VGL6016 Nov 02 DELETED
VGL6017 Nov 02 28/02/03 29/09/03
VGL6018 - 28/02/03 29/09/03
VGL6019 - - 29/09/03 01/07/05
VGL6030 Nov 02 28/02/03 29/09/03 01/01/05 01/07/05
VGL6035 Nov 02 28/02/03 29/09/03
VGL6036 Nov 02 28/02/03 DELETED
VGL6037 Nov 02 - 29/09/03
VGL6038 - 28/02/03 29/09/03 01/01/05
VGL6039 - - 29/09/03 01/07/05
VGL6090 - - 29/09/03
VGL8050 - Nov 02 29/09/03
VGL8051 Nov 02 28/02/03 29/09/03
VGL8052 Nov 02 28/02/03 29/09/03
VGL8055 Nov 02 28/02/03 29/09/03
VGL8056 Nov 02 28/02/03 29/09/03
VGL8057 Nov 02 28/02/03 29/09/03
VGL8058 - 28/02/03 29/09/03
VGL8059 - 28/02/03 29/09/03
VGL8080 Nov 02 DELETED
VGL8090 - - 29/09/03
VGL8150 Nov 02 28/02/03 29/09/03
VGL8151 Nov 02 28/02/03 29/09/03
VGL8152 Nov 02 28/02/03 29/09/03

Piping Valve Data Sheets Sheet 17 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD (Contd)

Globe Valves (contd)

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VGL9030 Nov 02 28/02/03 29/09/03 01/07/05
VGL9035 Nov 02 28/02/03 29/09/03
VGL9036 Nov 02 28/02/03 DELETED
VGL9037 Nov 02 28/02/03 29/09/03
VGL9038 - 28/02/03 29/09/03 01/01/05
VGL9039 - - 29/09/03 01/07/05
VGL9080 Nov 02 DELETED
VGL9081 Nov 02 DELETED
VGL15010 Nov 02 28/02/03 29/09/03 01/07/05
VGL15015 Nov 02 28/02/03 29/09/03
VGL15016 Nov 02 28/02/03 DELETED
VGL15017 Nov 02 28/02/03 29/09/03
VGL15018 - 28/02/03 29/09/03
VGL15019 - - 29/09/03 01/07/05
VGL15030 Nov 02 28/02/03 29/09/03 01/07/05
VGL15035 Nov 02 28/02/03 29/09/03
VGL15050 Nov 02 28/02/03 29/09/03
VGL15080 Nov 02 DELETED
VGL15081 Nov 02 DELETED
VGL25010 Nov 02 28/02/03 29/09/03 01/07/05
VGL25015 Nov 02 28/02/03 29/09/03
VGL25030 Nov 02 28/02/03 29/09/03 01/07/05
VGL25035 Nov 02 28/02/03 29/09/03
VGL100080 Nov 02 28/02/03 29/09/03 01/01/05
VGL100081 01/07/05
VGL100082 01/07/05
VGL150080 Nov 02 28/02/03 29/09/03 30/06/04 01/01/05
01/07/0
- - 29/09/03 30/06/04 01/01/05
VGL150081 5
VGL150083 01/07/05

Piping Valve Data Sheets Sheet 18 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Check Valves

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VC1010 Nov-02 28/02/03 29/09/03
VC1015 Nov-02 28/02/03 29/09/03
VC1016 Nov-02 DELETED
VC1017 Nov-02 28/02/03 29/09/03
VC1018 - 28/02/03 29/09/03 01/01/05
VC1019 - - 29/09/03
VC1020 - 28/02/03 29/09/03 01/07/05
VC1030 - Nov 02 29/09/03 01/07/05
VC1035 Nov-02 28/02/03 29/09/03
VC1036 Nov-02 DELETED
VC1037 Nov-02 28/02/03 29/09/03
VC1038 - 28/02/03 29/09/03 01/01/05
VC1039 - - 29/09/03 01/07/05
VC1040 Nov-02 28/02/03 29/09/03 01/07/05
VC1041 Nov-02 28/02/03 29/09/03
VC1080 Nov-02 DELETED
VC1160 Nov-02 28/02/03 29/09/03
VC3010 Nov-02 28/02/03 29/09/03
VC3015 Nov-02 28/02/03 29/09/03
VC3016 Nov-02 DELETED
VC3017 Nov-02 28/02/03 29/09/03
VC3018 - 28/02/03 29/09/03 01/01/05
VC3019 - - 29/09/03
VC3030 Nov-02 28/02/03 29/09/03 01/07/05
VC3035 Nov-02 28/02/03 29/09/03
VC3036 Nov-02 DELETED
VC3037 Nov-02 28/02/03 29/09/03
VC3038 - 28/02/03 29/09/03 01/01/05
VC3039 - - 29/09/03 01/07/05
VC3041 - 28/02/03 29/09/03 01/07/05
VC3080 Nov-02 DELETED
VC6010 Nov-02 28/02/03 29/09/03
VC6015 Nov-02 28/02/03 29/09/03
VC6016 Nov-02 28/02/03 DELETED
VC6017 Nov-02 - 29/09/03 01/01/05
VC6018 - 28/02/03 29/09/03 01/01/05
VC6019 - - 29/09/03
VC6030 Nov-02 28/02/03 29/09/03 01/07/05
VC6035 Nov-02 28/02/03 29/09/03
VC6036 Nov-02 28/02/03 DELETED
VC6037 Nov-02 - 29/09/03 01/01/05
VC6038 - 28/02/03 29/09/03 01/01/05
VC6039 - - 29/09/03 01/07/05
VC6090 - - 29/09/03
VC8050 Nov-02 28/02/03 29/09/03
VC8051 Nov-02 28/02/03 29/09/03
VC8055 Nov-02 28/02/03 29/09/03
VC8056 Nov-02 28/02/03 29/09/03
VC8058 - 28/02/03 29/09/03
VC8059 - 28/02/03 29/09/03
VC8080 Nov-02 DELETED
VC8090 - - 29/09/03
VC8150 Nov-02 28/02/03 29/09/03
VC8151 Nov-02 DELETED
VC9030 Nov-02 28/02/03 29/09/03 01/07/05

Piping Valve Data Sheets Sheet 19 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD (Contd)

Check Valves (contd)

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VC9035 Nov-02 28/02/03 29/09/03
VC9036 Nov-02 28/02/03 DELETED
VC9037 Nov-02 - 29/09/03
VC9038 - 28/02/03 29/09/03 01/01/05
VC9039 - - 29/09/03 01/07/05
VC9080 Nov-02 DELETED
VC9081 Nov-02 DELETED
VC15010 Nov-02 28/02/03 29/09/03
VC15015 Nov-02 28/02/03 29/09/03
VC15016 Nov-02 28/02/03 DELETED
VC15017 Nov-02 - 29/09/03
VC15018 - 28/02/03 29/09/03 01/01/05
VC15019 - - 29/09/03
VC15030 Nov-02 28/02/03 29/09/03 01/07/05
VC15035 Nov-02 28/02/03 29/09/03
VC15050 Nov-02 28/02/03 29/09/03
VC15080 Nov-02 DELETED
VC15081 Nov-02 DELETED
VC15082 Nov-02 DELETED
VC25010 Nov-02 28/02/03 29/09/03
VC25015 Nov-02 28/02/03 29/09/03
VC25030 Nov-02 28/02/03 29/09/03 01/07/05
VC25035 Nov-02 28/02/03 29/09/03
VC100080 Nov-02 28/02/03 29/09/03 01/01/05
VC100081 01/07/05
VC100082 01/07/05
VC100083 01/07/05
VC150080 Nov-02 28/02/03 29/09/03 30/06/04 01/01/05
VC150081 - - 29/09/03 30/06/04 01/01/05 01/07/05
VC150082 01/07/05
VC150083 01/07/05

Piping Valve Data Sheets Sheet 20 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VALVE DATA SHEETS REVISION RECORD

Miscellaneous Valves

Valve Data Revision


Sheet 0 1 2 3 4 5 6 7 8
VBB15010 - - 29/09/03 30/06/04 01/07/05
VBB15015 - - 29/09/03 30/06/04
VBB25010 - - 29/09/03 30/06/04 01/07/05
VBB25015 - - 29/09/03 30/06/04
VBB100080 01/07/05
VBB100082 01/07/05
VBB100083 01/07/05
VBB150080 01/07/05
VBB150081 01/07/05
VBB150053 01/07/05
VDB3010 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB3011 01/07/05
VDB3015 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB3017 - - 29/09/03 30/06/04 01/01/05
VDB3018 - - 29/09/03 30/06/04 01/01/05
VDB3019 - - 29/09/03 30/06/04 01/01/05
VDB3021 - - 29/09/03 30/06/04 01/01/05
VDB3022 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB3023 01/07/05
VDB3110 01/01/05 01/07/05
VDB3115 01/01/05
VDB3117 01/01/05
VDB3121 01/01/05
VDB3122 01/01/05 01/07/05
VDB3510 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB3511 01/07/05
VDB3515 - - 29/09/03 30/06/04 01/01/05
VDB3517 - - 29/09/03 30/06/04 01/01/05
VDB3521 - - 29/09/03 30/06/04 01/01/05
VDB3522 - - 29/09/03 30/06/04 01/01/05
VDB3610 01/01/05 01/07/05
VDB3615 01/01/05
VDB3621 01/01/05
VDB3122 01/01/05
VDB6010 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB6011 01/07/05
VDB6015 - - 29/09/03 30/06/04 01/01/05
VDB6017 - - 29/09/03 30/06/04 01/01/05
VDB6021 - - 29/09/03 30/06/04 01/01/05
VDB6022 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB6050 01/01/05
VDB6090 01/01/05
VDB6110 01/01/05 01/07/05
VDB6115 01/01/05
VDB6117 01/01/05
VDB6121 01/01/05
VDB6122 01/01/05 01/07/05
VDB6510 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB6515 - - 29/09/03 30/06/04 01/01/05
VDB6517 - - 29/09/03 30/06/04 01/01/05
VDB6522 - - 29/09/03 30/06/04 01/01/05
VDB6610 01/01/05 01/07/05
VDB6622 01/01/05
VDB15010 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB15015 - - 29/09/03 30/06/04 01/01/05

Piping Valve Data Sheets Sheet 21 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

VDB15017 - - 29/09/03 30/06/04 01/01/05


Valve Data Revision
Sheet 0 1 2 3 4 5 6 7 8
VDB15021 - - 29/09/03 30/06/04 01/01/05
VDB15022 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB15110 01/01/05 01/07/05
VDB15115 01/01/05
VDB15117 01/01/05
VDB15121 01/01/05
VDB15122 01/01/05 01/07/05
VDB15510 01/01/05 01/07/05
VDB15610 01/01/05 01/07/05
VDB25010 - - 29/09/03 30/06/04 01/07/05
VDB25015 - - 29/09/03 30/06/04
VDB100080 X 28/02/03 29/09/03 30/06/04 01/01/05
VDB100081 01/01/05
VDB100082 01/07/05
VDB100083 01/07/05
VDB150080 X 28/02/03 29/09/03 30/06/04 01/01/05 01/07/05
VDB150081 - - 29/09/03 30/06/04 01/01/05 01/07/05
VDB150082 01/07/05
VDB150083 01/07/05

VDP1010 - 28/02/03 29/09/03


VP1010 - 8/02/03 29/09/03 01/07/05

Piping Valve Data Sheets Sheet 22 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

ATTACHMENT 2

PIPING VALVE DATA SHEETS (Index)

Ball valve Reduced Bore


Ball valve Full Bore
Ball valve Top Entry
Butterfly Valve
Gate Valve
Globe Valve
Check Valve
Miscellaneous Valves (DBB, Plug, Diaphragm, etc)

Piping Valve Data Sheets Sheet 23 of 24


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
BALL VALVE INDEX - REDUCED BORE

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VBA1010 1/2"-8" 150# LTCS RF Floating Yes A11,A13,A18,A65,A21
VBA1015 1/2"-8" 150# 316SS RF Floating Yes A15
VBA1017 1/2"-8" 150# ALL825 RF Floating Yes A28
VBA1018 1/2"-4" 150# ALL20 RF Floating No A35
VBA1019 1/2"-4" 150# Ti RF Floating No A36
VBA1020 1/2"-12" 150# LT+PP RF Floating No A63
VBA1021 1/2"-8" 150# 316SS RF Floating Cryogenic Yes A04
VBA1022 1/2"-8" 150# LT+6mmRF Floating Yes A17

VBA1510 1/2"-8" 150# LTCS RF Floating High Temp. Yes A11,A13 ,A65
VBA1515 1/2"-8" 150# 316SS RF Floating High Temp. Yes A15
VBA1517 1/2"-8" 150# ALL825 RF Floating High Temp. Yes
VBA1521 1/2"-8" 150# 316SS RF Fltg High Temp.Cryo Yes A04
VBA1522 1/2"-8" 150# LT+6mmRF Floating High Temp. Yes A17

VBA1030 10" >= 150# LTCS RF Trunion Yes A11,A13,A18,A65


VBA1035 10" >= 150# 316SS RF Trunion Yes A15
VBA1037 10" >= 150# ALL825 RF Trunion Yes A28
VBA1038 10" >= 150# 316SS RF Trunion Cryogenic Yes A04

VBA1040 1/2" - 4" PN40 AL/BZ SCR Floating No A21,A22,A62,A81,B82

VBA1050 10" >= 150# LT+6mmRF Trunion Yes A17

VBA1530 10" >= 150# LTCS RF Trunion High Temp. Yes A11,A13,A65
VBA1535 10" >= 150# 316SS RF Trunion High Temp. Yes A15
VBA1537 10" >= 150# ALL825 RF Trunion High Temp. Yes
VBA1538 10" >= 150# 316SS RF Trn High Temp.Cryo Yes A04
VBA1550 10" >= 150# LT+6mmRF Trunion High Temp. Yes A17

VBA3010 1/2"-8" 300# LTCS RF Floating Yes B11,B13,B18,B65


VBA3015 1/2"-8" 300# 316SS RF Floating Yes B15
VBA3017 1/2"-8" 300# ALL825 RF Floating Yes B28
VBA3021 1/2"-8" 300# 316SS RF Floating Cryogenic Yes B04
VBA3022 1/2"-8" 300# LT+6mmRF Floating Yes B17

VBA3510 1/2"-8" 300# LTCS RF Floating High Temp. Yes B11,B13

VBA3030 10" >= 300# LTCS RF Trunion Yes B11,B13,B18,B65


VBA3035 10" >= 300# 316SS RF Trunion Yes B15
VBA3037 10" >= 300# ALL825 RF Trunion Yes B28
VBA3038 10" >= 300# 316SS RF Trunion Cryogenic Yes B04

VBA3050 10" >= 300# LT+6mmRF Trunion Yes B17

VBA3530 10" >= 300# LTCS RF Trunion High Temp. Yes B11,B13

VBA6010 1/2" - 1 1/2" 600# LTCS RTJ Floating Yes C11,C13,C18,C65


VBA6015 1/2" - 1 1/2" 600# 316SS RTJ Floating Yes C15
VBA6017 1/2" - 1 1/2" 600# ALL825 RTJ Floating Yes C28,C31,C82
VBA6021 1/2" - 1 1/2" 600# 316SS RTJ Floating Cryogenic Yes C04
VBA6022 1/2" - 1 1/2" 600# LT+6mmRTJ Floating Yes C17

VBA6510 1/2" - 1 1/2" 600# LTCS RTJ Floating High Temp. Yes C11, C13
VBA6515 1/2" - 1 1/2" 600# 316SS RTJ Floating High Temp. Yes
VBA6517 1/2" - 1 1/2" 600# ALL825 RTJ Floating High Temp. Yes
VBA6522 1/2" - 1 1/2" 600# LT+6mmRTJ Floating High Temp. Yes C17

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
BALL VALVE INDEX - REDUCED BORE

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VBA6030 2" >= 600# LTCS RTJ Trunion Yes C11,C13,C19,C18,C65
VBA6035 2" >= 600# 316SS RTJ Trunion Yes C15
VBA6037 2" >= 600# ALL825 RTJ Trunion Yes C28,C31,C82
VBA6038 2" >= 600# 316SS RTJ Trunion Cryogenic Yes C04
VBA6050 2" >= 600# LT+6mmRTJ Trunion Yes C17

VBA6530 2" >= 600# LTCS RTJ Trunion High Temp. Yes C11, C13
VBA6535 2" >= 600# 316SS RTJ Trunion High Temp. Yes
VBA6537 2" >= 600# ALL825 RTJ Trunion High Temp. Yes
VBA6550 2" >= 600# LT+6mmRTJ Trunion High Temp. Yes C17

VBA8015 1/2" - 2" 800# 316SS SCR Floating No B22

VBA9030 2" >= 900# LTCS RTJ Trunion Yes D11,D13,D65


VBA9035 2" >= 900# 316SS RTJ Trunion Yes D15

VBA9037 2" >= 900# ALL825 RTJ Trunion Yes D28,D31,D82


VBA9038 2" >= 900# 316SS RTJ Trunion Cryogenic Yes D04
VBA9050 2" >= 900# LT+6mmRTJ Trunion Yes D17

VBA9530 2" >= 900# LTCS RTJ Trunion High Temp. Yes D13

VBA15010 1/2" - 1 1/2" 1500# LTCS RTJ Floating Yes D11,D13,D65,E11


VBA15015 1/2" - 1 1/2" 1500# 316SS RTJ Floating Yes D15,E15

VBA15017 1/2" - 1 1/2" 1500# ALL825 RTJ Floating Yes D28,D31,D82


VBA15021 1/2" - 1 1/2" 1500# 316SS RTJ Floating Cryogenic Yes D04
VBA15022 1/2" - 1 1/2" 1500# LT+6mmRTJ Floating Yes D17

VBA15030 2" >= 1500# LTCS RTJ Trunion Yes E11


VBA15035 2" >= 1500# 316SS RTJ Trunion Yes E15

VBA15510 1/2" - 1 1/2" 1500# LTCS RTJ Floating High Temp. Yes D13

VBA25030 2" >= 2500# LTCS RTJ Trunion Yes F11


VBA25035 2" >= 2500# 316SS RTJ Trunion Yes F15

LEGEND: TE= Top Entry AL/BZ= AluminiumBronze


SCR= Screwed end ALL20= Alloy 20
LT+PP=LTCS Polypropylene lined LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
BALL VALVE INDEX - FULL BORE

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VBA1110 1/2"-6" 150# LTCS RF Floating Yes A11,A13,A18,A65,A21
VBA1115 1/2"-6" 150# 316SS RF Floating Yes A15
VBA1117 1/2"-6" 150# ALL825 RF Floating Yes A28
VBA1118 1/2"-4" 150# ALL20 RF Floating No A35
VBA1119 1/2"-4" 150# Ti RF Floating No A36
VBA1120 1/2"-10" 150# LT+PP RF Floating No A63
VBA1121 1/2"-6" 150# 316SS RF Floating Cryogenic Yes A04
VBA1122 1/2"-6" 150# LT+6mmRF Floating Yes A17

VBA1610 1/2"-6" 150# LTCS RF Floating High Temp. Yes A11,A13 ,A65
VBA1615 1/2"-6" 150# 316SS RF Floating High Temp. Yes A15
VBA1617 1/2"-6" 150# ALL825 RF Floating High Temp. Yes
VBA1621 1/2"-6" 150# 316SS RF Fltg High Temp.Cryo Yes A04
VBA1622 1/2"-6" 150# LT+6mmRF Floating High Temp. Yes A17

VBA1130 8" >= 150# LTCS RF Trunion Yes A11,A13,A18,A65


VBA1135 8" >= 150# 316SS RF Trunion Yes A15
VBA1137 8" >= 150# ALL825 RF Trunion Yes A28
VBA1138 8" >= 150# 316SS RF Trunion Cryogenic Yes A04

VBA1140 1/2" - 4" PN40 AL/BZ SCR Floating No A21,A22,A62

VBA1150 8" >= 150# LT+6mmRF Trunion Yes A17

VBA1630 8" >= 150# LTCS RF Trunion High Temp. Yes A11,A13,A65
VBA1635 8" >= 150# 316SS RF Trunion High Temp. Yes A15
VBA1637 8" >= 150# ALL825 RF Trunion High Temp. Yes
VBA1638 8" >= 150# 316SS RF Trn High Temp.Cryo Yes A04
VBA1650 8" >= 150# LT+6mmRF Trunion High Temp. Yes A17

VBA3110 1/2"-8" 300# LTCS RF Floating Yes B11,B13,B18,B65


VBA3115 1/2"-8" 300# 316SS RF Floating Yes B15
VBA3117 1/2"-8" 300# ALL825 RF Floating Yes B28
VBA3121 1/2"-8" 300# 316SS RF Floating Cryogenic Yes B04
VBA3122 1/2"-8" 300# LT+6mmRF Floating Yes B17

VBA3610 1/2"-8" 300# LTCS RF Floating High Temp. Yes B11,B13

VBA3130 8" >= 300# LTCS RF Trunion Yes B11,B13,B18,B65


VBA3135 8" >= 300# 316SS RF Trunion Yes B15
VBA3137 8" >= 300# ALL825 RF Trunion Yes B28
VBA3138 8" >= 300# 316SS RF Trunion Cryogenic Yes B04

VBA3150 8" >= 300# LT+6mmRF Trunion Yes B17

VBA3630 8" >= 300# LTCS RF Trunion High Temp. Yes B11,B13

VBA6110 1/2" - 1 1/2" 600# LTCS RTJ Floating Yes C11,C13,C18,C65


VBA6115 1/2" - 1 1/2" 600# 316SS RTJ Floating Yes C15
VBA6117 1/2" - 1 1/2" 600# ALL825 RTJ Floating Yes C28,C31,C82
VBA6121 1/2" - 1 1/2" 600# 316SS RTJ Floating Cryogenic Yes C04
VBA6122 1/2" - 1 1/2" 600# LT+6mmRTJ Floating Yes C17

VBA6610 1/2" - 1 1/2" 600# LTCS RTJ Floating High Temp. Yes C11, C13
VBA6615 1/2" - 1 1/2" 600# 316SS RTJ Floating High Temp. Yes
VBA6617 1/2" - 1 1/2" 600# ALL825 RTJ Floating High Temp. Yes
VBA6622 1/2" - 1 1/2" 600# LT+6mmRTJ Floating High Temp. Yes C17

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
BALL VALVE INDEX - FULL BORE

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VBA6130 2" >= 600# LTCS RTJ Trunion Yes C11,C13,C18,C65
VBA6135 2" >= 600# 316SS RTJ Trunion Yes C15
VBA6137 2" >= 600# ALL825 RTJ Trunion Yes C28,C31,C82
VBA6138 2" >= 600# 316SS RTJ Trunion Cryogenic Yes C04
VBA6150 2" >= 600# LT+6mmRTJ Trunion Yes C17

VBA6630 2" >= 600# LTCS RTJ Trunion High Temp. Yes C11, C13
VBA6635 2" >= 600# 316SS RTJ Trunion High Temp. Yes
VBA6650 2" >= 600# LT+6mmRTJ Trunion High Temp. Yes C17

VBA9130 2" >= 900# LTCS RTJ Trunion Yes D11,D13,D65


VBA9135 2" >= 900# 316SS RTJ Trunion Yes D15

VBA9137 2" >= 900# ALL825 RTJ Trunion Yes D28,D31,D82


VBA9138 2" >= 900# 316SS RTJ Trunion Cryogenic Yes D04
VBA9150 2" >= 900# LT+6mmRTJ Trunion Yes D17

VBA9630 2" >= 900# LTCS RTJ Trunion High Temp. Yes D13

VBA15110 1/2" - 1 1/2" 1500# LTCS RTJ Floating Yes D11,D13,D65,E11


VBA15115 1/2" - 1 1/2" 1500# 316SS RTJ Floating Yes D15,E15

VBA15117 1/2" - 1 1/2" 1500# ALL825 RTJ Floating Yes D28,D31,D82


VBA15121 1/2" - 1 1/2" 1500# 316SS RTJ Floating Cryogenic Yes D04
VBA15122 1/2" - 1 1/2" 1500# LT+6mmRTJ Floating Yes D17

VBA15130 2" >= 1500# LTCS RTJ Trunion Yes E11


VBA15135 2" >= 1500# 316SS RTJ Trunion Yes E15

VBA15610 1/2" - 1 1/2" 1500# LTCS RTJ Floating High Temp. Yes D13

VBA25110 1" - 1 1/2" 2500# LTCS RTJ Trunion Yes F11


VBA25115 1" - 1 1/2" 2500# 316SS RTJ Trunion Yes F15

VBA25130 2" >= 2500# LTCS RTJ Trunion Yes F11


VBA25135 2" >= 2500# 316SS RTJ Trunion Yes F15

LEGEND: TE= Top Entry AL/BZ= AluminiumBronze


SCR= Screwed end ALL20= Alloy 20
LT+PP=LTCS Polypropylene lined LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
BALL VALVE INDEX - TOP ENTRY

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


REDUCED BORE
VBA6730 6" - 30" 600# LTCS BW Trunion Yes C11,C13,C18
VBA6731 8"- 30" 600# LTCS RTJ Trunion Yes C11,C13,C18
VBA6737-C28 6" - 24" 600# ALL825 BW Trunion Yes C28
VBA6737-C31 6" - 24" 600# ALL825 BW Trunion Yes C31
VBA6737-C82 6" - 24" 600# ALL825 BW Trunion Yes C82
VBA6738 6" - 24" 600# 316SS BW Trunion Cryogenic Yes C04
VBA6739 8" - 24" 600# 316SS RTJ Trunion Cryogenic Yes C04
VBA6740 8" - 24" 600# ALL825 RTJ Trunion Yes C28,C31
VBA6750 6" - 24" 600# LT+6mmBW Trunion Yes C17
VBA6751 8" - 28" 600# LT+6mmRTJ Trunion Yes C17

VBA9730 6" - 24" 900# LTCS BW Trunion Yes D11,D13


VBA9731 8" - 36" 900# LTCS RTJ Trunion Yes D11,D13
VBA9737-D28 6" - 24" 900# ALL825 BW Trunion Yes D28
VBA9737-D31 6" - 24" 900# ALL825 BW Trunion Yes D31
VBA9737-D82 6" - 24" 900# ALL825 BW Trunion Yes D82
VBA9738 6" - 24" 900# 316SS BW Trunion Cryogenic Yes D04
VBA9739 8" - 30" 900# 316SS RTJ Trunion Cryogenic Yes D04
VBA9740 8" - 36" 900# ALL825 RTJ Trunion Yes D28,D31
VBA9750 6" - 24" 900# LT+6mmBW Trunion Yes D17
VBA9751 8" - 36" 900# LT+6mmRTJ Trunion Yes D17

VBA15730 2" - 16" 1500# LTCS BW Trunion Yes E11


VBA15735 2" - 6" 1500# 316SS BW Trunion Yes E15

VBA25730 2" - 16" 2500# LTCS BW Trunion Yes F11


VBA25735 2" - 6" 2500# 316SS BW Trunion Yes F15
FULL BORE
VBA6930 6" - 30" 600# LTCS BW Trunion Yes C11,C13,C18
VBA6931 8" - 30" 600# LTCS RTJ Trunion Yes C11,C13,C18
VBA6937-C28 6" - 24" 600# ALL825 BW Trunion Yes C28
VBA6937-C31 6" - 24" 600# ALL825 BW Trunion Yes C31
VBA6937-C82 6" - 24" 600# ALL825 BW Trunion Yes C82
VBA6938 6" - 24" 600# 316SS BW Trunion Cryogenic Yes C04
VBA6939 8" - 24" 600# 316SS RTJ Trunion Cryogenic Yes C04
VBA6940 8" - 24" 600# ALL825 RTJ Trunion Yes C28,C31
VBA6950 6" - 24" 600# LT+6mmBW Trunion Yes C17
VBA6951 6" - 28" 600# LT+6mmBW Trunion Yes C17

VBA9930 6" - 24" 900# LTCS BW Trunion Yes D11,D13


VBA9931 6" - 36" 900# LTCS RTJ Trunion Yes D11,D13
VBA9937-D28 6" - 24" 900# ALL825 BW Trunion Yes D28
VBA9937-D31 6" - 24" 900# ALL825 BW Trunion Yes D31
VBA9937-D82 6" - 24" 900# ALL825 BW Trunion Yes D82
VBA9938 6" - 24" 900# 316SS BW Trunion Cryogenic Yes D04
VBA9939 6" - 30" 900# 316SS RTJ Trunion Cryogenic Yes D04
VBA9941 6" - 36" 900# ALL825 RTJ Trunion Yes D28,D31
VBA9950 6" - 24" 900# LT+6mmBW Trunion Yes D17
VBA9951 6" - 36" 900# LT+6mmRTJ Trunion Yes D17

VBA15930 2" - 16" 1500# LTCS BW Trunion Yes E11


VBA15935 2" - 6" 1500# 316SS BW Trunion Yes E15

VBA25930 2" - 16" 2500# LTCS BW Trunion Yes F11


VBA25935 2" - 6" 2500# 316SS BW Trunion Yes F15

LEGEND: LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

BUTTERFLY VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VBY1010 2" >= 150# LT+EPDM RF Wafer No A21
VBY1011 2" >= 150# LT+EPDM RF Wafer tapped No A81
VBY1010EX3000 2" >= 150# LT+EPDM RF Wafer + Extn No A21, A29

VBY1020EX3000 2" >= 150# LT+EPDM RF FLGD+Extn No A62


VBY1030 2" >= 150# LTCS RF Wafer Yes A11, A18
VBY1035 2" >= 150# 316SS RF Wafer Yes A15
VBY1039 2" >= 150# LT+6mm RF Wafer Yes A17

VBY1530 30" >= 150# LTCS RF Flanged Yes A11

VBY3010 2" >= 20 barg LT+EPDM RF Wafer tapped No B82


VBY3035 2" >= 300# 316SS RF Wafer Yes B15

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

GATE VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VG1010 1/2" - 1 1/2" 150# LTCS RF Solid Wedge T12 Yes A18
VG1030 2">= 150# LTCS RF Flex. Wedge T12 Yes A18
VG1040 1/2" - 4" PN40 AL/BZ TE Solid Wedge No A02,A22
VG1041 6" - 10" 150# AL/BZ FF Solid Wedge No A02,A22

VG1050 1/2" - 1 1/2" 150# LTCS RF Solid Wedge T12 No A55


VG1055 1/2" - 1 1/2" 150# 316SS RF Solid Wedge T12 No

VG1060 2" >= 150# LTCS RF Flex. Wedge T10 No A20,A21,A24,A29,A55,A56,A


62
VG1060EX3000 2" >= 150# LTCS RF T10 + EXTN No A20,A21,A29,A62
VG1065 2" >= 150# 316SS RF Flex. Wedge T10 No A05
VG1070 2" >= 150# LTCS RF Flex. Wedge T12 No A25

VG1160 2" >= 150# CS RF Flex. Wedge T8 No A01,A03

VG3010 1/2" - 1 1/2" 300# LTCS RF Solid Wedge T12 Yes B18
VG3030 2">= 300# LTCS RF Flex. Wedge T12 Yes B18
VG3050 1/2" - 1 1/2" 300# LTCS RF Solid Wedge T12 No
VG3055 1/2" - 1 1/2" 300# 316SS RF Solid Wedge T12 No

VG3060 2" >= 300# LTCS RF Flex. Wedge T10 No


VG3065 2" >= 300# 316SS RF Flex. Wedge T10 No B22
VG3070 2" >= 300# LTCS RF Flex. Wedge T12 No B25

VG6050 1/2" - 1 1/2" 600# LTCS RTJ Solid Wedge T12 No C25
VG6051 1/2" - 1 1/2" 600# F11 RTJ Solid Wedge No C40
VG6055 1/2" - 1 1/2" 600# 316SS RTJ Solid Wedge T12 No

VG6060 2" >= 600# LTCS RTJ Flex. Wedge T10 No C21,C56
VG6065 2" >= 600# 316SS RTJ Flex. Wedge T10 No
VG6070 2" >= 600# LTCS RTJ Flex. Wedge T12 No C25
VG6090 2" >= 600# WC6 RTJ Flex. Wedge No C40

VG8050 1/2" - 1 1/2" 800# LTCS SW Solid Wedge T12 No A20,A21,A25,A56,B25,C21,C


25, C56
VG8051 1/2" - 2" 800# LTCS TE Solid Wedge T12 No A20,A21,A24,A25,A29,A56,A
62, B25,C21, C25
VG8052 1/2" - 1 1/2" 800# LTCS SWxTE Solid Wedge T12 No A20,A21,A25,A56,B25,C21,C
25, C56
VG8055 1/2" - 1 1/2" 800# 316SS SW Solid Wedge T12 No A05
VG8056 1/2" - 2" 800# 316SS TE Solid Wedge T12 No A05,B22
VG8057 1/2" - 1 1/2" 800# 316SS SWxTE Solid Wedge T12 No A05
VG8090 1/2" - 1 1/2" 800# F11 SW Solid Wedge No C40
VG8091 1/2" - 1 1/2" 800# F11 TE Solid Wedge No C40
VG8092 1/2" - 1 1/2" 800# F11 SWxTE Solid Wedge No C40
VG8150 1/2" - 1 1/2" 800# CS SW Solid Wedge T8 No A01,A03
VG8151 1/2" - 1 1/2" 800# CS TE Solid Wedge T8 No A01,A03
VG8152 1/2" - 1 1/2" 800# CS SWxTE Solid Wedge T8 No A01,A03

VG9060 2" >= 900# LTCS RTJ Flex. Wedge T10 No


VG9065 2" >= 900# 316SS RTJ Flex. Wedge T10 No
VG9070 2" >= 900# LTCS RTJ Flex. Wedge T12 No

VG15050 1/2" - 1 1/2" 1500# LTCS RTJ Solid Wedge T12 No


VG15055 1/2" - 1 1/2" 1500# 316SS RTJ Solid Wedge T12 No

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

GATE VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VG100080 1" - 14" 10000 ALL625 BW Slab Gate FB Yes P81
VG100081 1" - 6" 10000 F44 BW Slab Gate FB No P83
VG100082 1" - 6" 10000 F60 BW Slab Gate FB No P82
VG150080 2" - 12" 15000 LTCS BW Slab Gate FB Yes R81
VG150081 1" - 14" 15000 ALL625 BW Slab Gate FB Yes R82
VG150083 1 1/2" - 6" 15000 F60 BW Slab Gate FB No R83

LEGEND: TE= Threaded End AL/BZ= AluminiumBronze


FB= Full Bore ALL20= Alloy 20
FF= Full Face LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
GLOBE VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VGL1010 1/2" - 1 1/2" 150# LTCS RF Plug Disc T12 Yes A11,A18
VGL1015 1/2" - 1 1/2" 150# 316SS RF Plug Disc T12 Yes A15
VGL1017 1/2" - 1 1/2" 150# ALL825 RF Plug Disc Yes A28,A63
VGL1018 1/2" - 1 1/2" 150# 316SS RF T12 Cryogenic Yes A04
VGL1019 1/2" - 1 1/2" 150# LT+6mm RF Plug Disc T12 Yes A17

VGL1030 2" - 14" 150# LTCS RF Plug Disc T12 Yes A11,A13,A18,A20,A21,A24
A25,A65
VGL1035 2" - 8" 150# 316SS RF Plug Disc T10 Yes A05,A15
VGL1037 2" - 8" 150# ALL825 RF Plug Disc Yes A28,A63
VGL1038 2" - 10" 150# 316SS RF T10 Cryogenic Yes A04
VGL1039 2" - 10" 150# LT+6mm RF Plug Disc T12 Yes A17

VGL1040 1/2" - 4" PN40 AL/BZ TE Plug Disc No A02,A22,A81


VGL1041 6" - 10" 150# AL/BZ FF Plug Disc No A02,A22

VGL1160 2" - 8" 150# CS RF Plug Disc T8 No A01,A03

VGL3010 1/2" - 1 1/2" 300# LTCS RF Plug Disc T12 Yes B11,B18
VGL3015 1/2" - 1 1/2" 300# 316SS RF Plug Disc T12 Yes B15,
VGL3017 1/2" - 1 1/2" 300# ALL825 RF Plug Disc Yes B28
VGL3018 1/2" - 1 1/2" 300# 316SS RF T12 Cryogenic Yes B04
VGL3019 1/2" - 1 1/2" 300# LT+6mm RF Plug Disc T12 Yes B17

VGL3030 2" - 10" 300# LTCS RF Plug Disc T12 Yes B11,B13,B18,B28,B25,B65
VGL3035 2" - 8" 300# 316SS RF Plug Disc T10 Yes B15,B22
VGL3037 2" - 8" 300# ALL825 RF Plug Disc Yes B28
VGL3038 2" - 8" 300# 316SS RF T10 Cryogenic Yes B04
VGL3039 2" - 8" 300# LT+6mm RF Plug Disc T12 Yes B17

VGL6010 1/2" - 1 1/2" 600# LTCS RTJ Plug Disc T12 Yes C11,C18
VGL6015 1/2" - 1 1/2" 600# 316SS RTJ Plug Disc T12 Yes C15
VGL6017 1/2" - 1 1/2" 600# ALL825 RTJ Plug Disc Yes C28,C31,C82
VGL6018 1/2" - 1 1/2" 600# 316SS RTJ T12 Cryogenic Yes C04
VGL6019 1/2" - 1 1/2" 600# LT+6mm RTJ Plug Disc T12 Yes C17

VGL6030 2" - 12" 600# LTCS RTJ Plug Disc T12 Yes C11,C13,C18,C21,C25,C65
VGL6035 2" - 8" 600# 316SS RTJ Plug Disc T10 Yes C15
VGL6037 2" - 8" 600# ALL825 RTJ Plug Disc Yes C28,C31,C82
VGL6038 2" - 8" 600# 316SS RTJ T10 Cryogenic Yes C04
VGL6039 2" - 8" 600# LT+6mm RTJ Plug Disc T12 Yes C17
VGL6090 2" - 8" 600# WC6 RTJ Plug Disc No C40

VGL8050 1/2" - 1 1/2" 800# LTCS SW Plug Disc T12 No A13,A20,A21,A25,A65,B13


B25,B65,C13,C21,C25,C65
VGL8051 1/2" - 2" 800# LTCS TE Plug Disc T12 No A24
VGL8052 1/2" - 1 1/2" 800# LTCS SWxTE Plug Disc T12 No
VGL8055 1/2" - 1 1/2" 800# 316SS SW Plug Disc T12 No A05
VGL8056 1/2" - 2" 800# 316SS TE Plug Disc T12 No B22
VGL8057 1/2" - 1 1/2" 800# 316SS SWxTE Plug Disc T12 No
VGL8058 1/2" - 2" 800# ALL20 SW Plug Disc No A35
VGL8059 1/2" - 2" 800# Ti SW Plug Disc No A36
VGL8090 1/2" - 1 1/2" 800# F11 SW Plug Disc T12 No C40

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
GLOBE VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VGL8150 1/2" - 1 1/2" 800# CS SW Plug Disc T8 No A01,A03
VGL8151 1/2" - 1 1/2" 800# CS TE Plug Disc T8 No
VGL8152 1/2" - 1 1/2" 800# CS SWxTE Plug Disc T8 No
VGL9030 2" - 8" 900# LTCS RTJ Plug Disc T12 Yes D11,D13,D65
VGL9035 2" - 8" 900# 316SS RTJ Plug Disc T10 Yes D15

VGL9037 2" - 8" 900# ALL825 RTJ Plug Disc Yes D28,D31,D82
VGL9038 2" - 8" 900# 316SS RTJ T10 Cryogenic Yes D04
VGL9039 2" - 8" 900# LT+6mm RTJ Plug Disc T12 Yes D17

VGL15010 1/2" - 1 1/2" 1500# LTCS RTJ Plug Disc T12 Yes D11,D65,E11
VGL15015 1/2" - 1 1/2" 1500# 316SS RTJ Plug Disc T12 Yes D15,E15

VGL15017 1/2" - 1 1/2" 1500# ALL825 RTJ Plug Disc Yes D28,D31,D82
VGL15018 1/2" - 1 1/2" 1500# 316SS RTJ T12 Cryogenic Yes D04
VGL15019 1/2" - 1 1/2" 1500# LT+6mm RTJ Plug Disc T12 Yes D17

VGL15030 2" - 8" 1500# LTCS RTJ Plug Disc T12 Yes E11
VGL15035 2" - 6" 1500# 316SS RTJ Plug Disc T10 Yes E15

VGL15050 1/2" - 1 1/2" 1500# LTCS SW Plug Disc T12 No D13

VGL25010 1/2" - 1 1/2" 2500# LTCS RTJ Plug Disc T12 Yes F11
VGL25015 1/2" - 1 1/2" 2500# 316SS RTJ Plug Disc T10 Yes F15

VGL25030 2" - 8" 2500# LTCS RTJ Plug Disc T12 Yes F11
VGL25035 2" - 6" 2500# 316SS RTJ Plug Disc T10 Yes F15

VGL100080 1" - 4" 10000 ALL625 BW Yes P81


VGL100081 1" - 2" 10000 F44 BW No P83
VGL100082 1" - 4" 10000 F60 BW No P82
VGL150080 2" - 6" 15000 LTCS BW Yes R81
VGL150081 1" - 4" 15000 ALL625 BW Yes R82
VGL150083 1 1/2" - 4" 15000 F60 BW No R83

LEGEND: TE= Threaded End AL/BZ= AluminiumBronze

FF= Full Face LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

CHECK VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VC1010 1/2" - 1 1/2" 150# LTCS RF Ball T12 Yes A11,A18
VC1015 1/2" - 1 1/2" 150# 316SS RF Ball T12 Yes A15
VC1017 1/2" - 1 1/2" 150# ALL825 RF Ball Yes A28
VC1018 1/2" - 1 1/2" 150# 316SS RF Ball T12 Cryogenic Yes A04
VC1019 1/2" - 1 1/2" 150# LT+6mm RF Ball T12 Yes A17
VC1020 1/2"-12" 150# LT+PP RF Ball No A63

VC1030 2" >= 150# LTCS RF Wafer Yes A11,A13,A18,A20,A21,A24A


25 A29,A62,A65
VC1035 2" >= 150# 316SS RF Wafer Yes A05,A15
VC1037 2" >= 150# ALL825 RF Wafer Yes A28
VC1038 2" >= 150# 316SS RF Wafer Cryogenic Yes A04
VC1039 2" >= 150# LT+6mm RF Wafer Yes A17

VC1040 1/2" - 4" PN40 AL/BZ TE Swing No A02,A22,A81,B82


VC1041 2" >= 150# AL/BZ FF Wafer No A02,A22,A81

VC1160 2" >= 150# CS RF Wafer No A01,A03

VC3010 1/2" - 1 1/2" 300# LTCS RF Ball T12 Yes B11,B18


VC3015 1/2" - 1 1/2" 300# 316SS RF Ball T12 Yes B15
VC3017 1/2" - 1 1/2" 300# ALL825 RF Ball Yes B28
VC3018 1/2" - 1 1/2" 300# 316SS RF Ball T12 Cryogenic Yes B04
VC3019 1/2" - 1 1/2" 300# LT+6mm RF Ball T12 Yes B17

VC3030 2" >= 300# LTCS RF Wafer Yes B11,B13,B18,B25,B65


VC3035 2" >= 300# 316SS RF Wafer Yes B15,B22
VC3037 2" >= 300# ALL825 RF Wafer Yes B28
VC3038 2" >= 300# 316SS RF Wafer Cryogenic Yes B04
VC3039 2" >= 300# LT+6mm RF Wafer Yes B17
VC3041 2" >= 300# AL/BZ FF Wafer No B82

VC6010 1/2" - 1 1/2" 600# LTCS RTJ Ball T12 Yes C11,C18
VC6015 1/2" - 1 1/2" 600# 316SS RTJ Ball T12 Yes C15
VC6017 1/2" - 1 1/2" 600# ALL825 RTJ Ball Yes C28,C31,C82
VC6018 1/2" - 1 1/2" 600# 316SS RTJ Ball T12 Cryogenic Yes C04
VC6019 1/2" - 1 1/2" 600# LT+6mm RTJ Ball T12 Yes C17
VC6030 2" >= 600# LTCS RTJ Wafer Yes C11,C13,C18,C21,C25,C65
VC6035 2" >= 600# 316SS RTJ Wafer Yes C15
VC6037 2" >= 600# ALL825 RTJ Wafer Yes C28,C31,C82
VC6038 2" >= 600# 316SS RTJ Wafer Cryogenic Yes C04
VC6039 2" >= 600# LT+6mm RTJ Wafer Yes C17
VC6090 2" >= 600# WC6 RTJ Wafer No C40

VC8050 1/2" - 1 1/2" 800# LTCS SW Ball T12 No A13,A20,A21,A25,A65,B13


B25,B65,C13,C21,C25,C65
VC8051 1/2" - 1 1/2" 800# LTCS TE Ball T12 No A22
VC8055 1/2" - 1 1/2" 800# 316SS SW Ball T12 No A05
VC8056 1/2" - 2" 800# 316SS TE Ball T12 No B22
VC8058 1/2" - 2" 800# ALL20 SW Ball No A35
VC8059 1/2" - 2" 800# Ti SW Ball No A36
VC8090 1/2" - 1 1/2" 800# F11 SW Ball T12 No C40

VC8150 1/2" - 1 1/2" 800# CS SW Ball T8 No A01,A03

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

CHECK VALVE INDEX

Valve No Size Range Rating Mat'l Ends Type NACE Class(es)


VC9030 2" >= 900# LTCS RTJ Wafer Yes D11,D13,D65
VC9035 2" >= 900# 316SS RTJ Wafer Yes D15

VC9037 2" >= 900# ALL825 RTJ Wafer Yes D28,D31,D82


VC9038 2" >= 900# 316SS RTJ Wafer Cryogenic Yes D04
VC9039 2" >= 900# LT+6mm RTJ Wafer Yes D17

VC15010 1/2" - 1 1/2" 1500# LTCS RTJ Ball T12 Yes D11,D65,E11
VC15015 1/2" - 1 1/2" 1500# 316SS RTJ Ball T12 Yes D15,E15

VC15017 1/2" - 1 1/2" 1500# ALL825 RTJ Ball Yes D28,D31,D82


VC15018 1/2" - 1 1/2" 1500# 316SS RTJ Ball Cryogenic Yes D04
VC15019 1/2" - 1 1/2" 1500# LT+6mm RTJ Ball T12 Yes D17

VC15030 2" >= 1500# LTCS RTJ Wafer Yes E11


VC15035 2" >= 1500# 316SS RTJ Wafer Yes E15

VC15050 1/2" - 1 1/2" 1500# LTCS SW Ball T12 No D13

VC25010 1/2" - 1 1/2" 2500# LTCS RTJ Ball T12 Yes F11
VC25015 1/2" - 1 1/2" 2500# 316SS RTJ Ball T10 Yes F15

VC25030 2" >= 2500# LTCS RTJ Wafer Yes F11


VC25035 2" >= 2500# 316SS RTJ Wafer Yes F15

VC100080 1" - 14" 10000 ALL625 BW Swing Yes P81


VC100081 1" - 6" 10000 F44 BW Swing No P83
VC100082 2" 10000 ALL625 BW Piston Yes P81
VC100083 1" - 6" 10000 F60 BW Swing No P82
VC150080 2" - 12" 15000 LTCS BW Swing Yes R81
VC150081 2" - 14" 15000 ALL625 BW Swing Yes R82
VC150082 2" 15000 LTCS BW Piston Yes R81
VC150083 1 1/2" - 6" 15000 F60 BW Swing No R83

LEGEND: TE= Threaded End AL/BZ= AluminiumBronze


FB= Full Bore ALL20= Alloy 20
FF= Full Face LT+6mm= LTCS + 6mm CA

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
MISCELLANEOUS VALVE INDEX
Valve No Size Range Rating Mat'l Ends Type NACE Class(es)

DOUBLE BLOCK VALVES (eg drain valves)


VBB15010 1/2" - 2" 1500# LTCS RTJ Floating double bloc Yes E11
VBB15015 1/2" - 2" 1500# 316SS RTJ Floating double bloc Yes E15

VBB25010 1/2" - 2" 2500# LTCS RTJ Floating double bloc Yes F11
VBB25015 1/2" - 2" 2500# 316SS RTJ Floating double bloc Yes F15

VBB100080 1" - 2" 10000 ALL625 BW Gate BW X RTJ Yes P81


VBB100082 1" - 2" 10000 6Mo BW Gate BW X CLAMP No P83
VBB100083 1" - 2" 10000 F60 BW Gate BW X RTJ No P82
VBB150080 2" 15000 F22 BW Gate BW X RTJ Yes R81
VBB150081 1" - 2" 15000 ALL625 BW Gate BW X RTJ Yes R82
VBB150083 1 1/2" - 2" 15000 F60 BW Gate BW X RTJ No R83

DOUBLE BLOCK & BLEED VALVES 10mm BORE MIN.(eg end of


line inst. isolation valves such as PG)
VDB3010 1/2" - 2" 300# LTCS RF Floating Yes A11,A13,A18,A65,B11,
B13,B18,B65
VDB3011 2" x 1/2" 300# LTCS RF Floating Yes A11,A13,A18,A65,B11,
B13,B18,B65
VDB3015 1/2" - 2" 300# 316SS RF Floating Yes A15,B15
VDB3017 1/2" - 2" 300# ALL825 RF Floating Yes A28,B28,A63
VDB3018 1/2" - 2" 300# ALL 20 RF Floating A35
VDB3019 1/2" - 2" 300# Ti RF Floating A36
VDB3021 1/2" - 2" 300# 316SS RF Floating Cryogenic Yes A04,B04
VDB3022 1/2" - 2" 300# LT+6mmRF Floating Yes A17,B17
VDB3023 2" x 1/2" 300# LT+6mmRF Floating Yes A17,B17

VDB3510 1/2" - 2" 300# LTCS RF Floating High Temp. Yes A11,A13,A65 ,B11, B13
VDB3511 2" x 1/2" 300# LTCS RF Floating High Temp. Yes A13
VDB3515 1/2" - 2" 300# 316SS RF Floating High Temp. Yes A15
VDB3517 1/2" - 2" 300# ALL825 RF Floating High Temp. Yes
VDB3521 1/2" - 2" 300# 316SS RF Floatg Cryo Hitemp Yes A04
VDB3522 1/2" - 2" 300# LT+6mmRF Floating High Temp. Yes A17

VDB6010 1/2" - 2" 600# LTCS RTJ Floating Yes C11,C13,C18,C65


VDB6011 2" x 1/2" 600# LTCS RTJ Floating Yes C11,C13,C18,C65
VDB6015 1/2" - 2" 600# 316SS RTJ Floating Yes C15
VDB6017 1/2" - 2" 600# ALL825 RTJ Floating Yes C28,C31,C82
VDB6021 1/2" - 2" 600# 316SS RTJ Floating Cryogenic Yes C04
VDB6022 1/2" - 2" 600# LT+6mmRTJ Floating Yes C17
VDB6050 1/2" - 2" 600# LTCS RTJ Globe/Needle No C25 (Note 1)
VDB6090 1/2" - 2" 600# F11 RTJ Globe/Needle No C40 (Note 1)

VDB6510 1/2" - 2" 600# LTCS RTJ Floating High Temp. Yes C11,C13
VDB6515 1/2" - 2" 600# 316SS RTJ Floating High Temp. Yes
VDB6517 1/2" - 2" 600# ALL825 RTJ Floating High Temp. Yes
VDB6522 1/2" - 2" 600# LT+6mmRTJ Floating High Temp. Yes C17

VDB15010 1/2" - 2" 1500# LTCS RTJ Floating Yes D11,D13,D65,E11


VDB15015 1/2" - 2" 1500# 316SS RTJ Floating Yes D15,E15
VDB15017 1/2" - 2" 1500# ALL825 RTJ Floating Yes D28,D31,D82
VDB15021 1/2" - 2" 1500# 316SS RTJ Floating Cryogenic Yes D04
VDB15022 1/2" - 2" 1500# LT+6mmRTJ Floating Yes D17

VDB15510 1/2" - 2" 1500# LTCS RTJ Floating High Temp. Yes D13

VDB25010 1/2" - 2" 2500# LTCS RTJ Floating Yes F11


VDB25015 1/2" - 2" 2500# 316SS RTJ Floating Yes F15

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005
MISCELLANEOUS VALVE INDEX
Valve No Size Range Rating Mat'l Ends Type NACE Class(es)
FULL BORE DOUBLE BLOCK & BLEED VALVES (eg in- line
instrument isolation valves such as LG)

VDB3110 3/4"-2" 300# LTCS RF Floating Yes A11A13,A18,A65,B11,


B13, B18,B65
VDB3115 3/4"-2" 300# 316SS RF Floating Yes A15,B15
VDB3117 3/4"-2" 300# ALL825 RF Floating Yes A28,B28,A63
VDB3121 3/4"-2" 300# 316SS RF Floating Cryogenic Yes A04,B04
VDB3122 3/4"-2" 300# LT+6mmRF Floating Yes A17,B17

VDB3610 3/4"-2" 300# LTCS RF Floating High Temp. Yes A11A13,A65,B11,B13

VDB3615 3/4"-2" 150# 316SS RF Floating High Temp. Yes A15


VDB3621 3/4"-2" 150# 316SS RF Fltg High Temp.CryoYes A04
VDB3622 3/4"-2" 150# LT+6mmRF Floating High Temp. Yes A17

VDB6110 3/4" - 2" 600# LTCS RTJ Floating Yes C11,C13,C18,C65


VDB6115 3/4" - 2" 600# 316SS RTJ Floating Yes C15
VDB6117 3/4" - 2" 600# ALL825 RTJ Floating Yes C28,C31,C82
VDB6121 3/4" - 2" 600# 316SS RTJ Floating Cryogenic Yes C04
VDB6122 3/4" - 2" 600# LT+6mmRTJ Floating Yes C17

VDB6610 3/4" - 2" 600# LTCS RTJ Floating High Temp. Yes C11, C13
VDB6622 3/4" - 2" 600# LT+6mmRTJ Floating High Temp. Yes C17

VDB15110 3/4" - 2" 1500# LTCS RTJ Floating Yes D11,D13,D65,E11


VDB15115 3/4" - 2" 1500# 316SS RTJ Floating Yes D15,E15

VDB15117 3/4" - 2" 1500# ALL825 RTJ Floating Yes D28,D31,D82


VDB15121 3/4" - 2" 1500# 316SS RTJ Floating Cryogenic Yes D04
VDB15122 3/4" - 2" 1500# LT+6mmRTJ Floating Yes D17

VDB15610 3/4" - 2" 1500# LTCS RTJ Floating High Temp. Yes D13

DOUBLE BLOCK & BLEED VALVES FOR HP CLASSES


VDB100080 1" - 2" 10000 ALL625 BW Gate BW X RTJ Yes P81
VDB100081 1" - 2" 10000 ALL625 BW Gate BW X BW Yes P81
VDB100082 1" - 2" 10000 F44 BW Gate BW X BW No P83
VDB100083 1" - 2" 10000 F60 BW Gate BW X RTJ No P82
VDB150080 2" - 3" 15000 LTCS BW Gate BW X RTJ Yes R81
VDB150081 1" - 2" 15000 ALL625 BW Gate BW X RTJ Yes R82
VDB150082 1" - 2" 15000 ALL625 BW Gate BW X BW Yes R82
VDB150083 1 1/2" - 2" 15000 F60 BW Gate BW X RTJ No R83

IN-LINE MISCELLANEOUS VALVES


VDP1010 1/2" - 12" 150# LTCS RF Diaphragm No A18
VP1010 1" - 8" 150# LTCS RF Plug + Jacket Yes A16

Piping Valve Data Sheets


Agip KCO KE01.00.000.KD.P.TD.0015.000
KDPC Rev D03 Jul 2005

ATTACHMENT 3

PIPING VALVE DATA SHEETS

Ball valve Reduced Bore


Ball valve Full Bore
Ball valve Top Entry
Butterfly Valve
Gate Valve
Globe Valve
Check Valve
Miscellaneous Valves (DBB etc)

Piping Valve Data Sheets Sheet 24 of 24


TYPE:BALL VALVE TAG No.VBA1010 Ref. Note
REDUCED BORE Number
PIPING CLASS A11,A13,A18,A21,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1015 Ref. Note
REDUCED BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1017 Ref. Note
REDUCED BORE Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1018 Ref. Note
REDUCED BORE Number
PIPING CLASS A35 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 6
SERVICE DUTY SULPHURIC ACID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER ALLOY 20 B462 N08020 / A351 CN7M
STEM/TRUNIONS/PINS ALLOY 20
DISC/PLATES/BALL ALLOY 20
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2


FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1019 Ref. Note
REDUCED BORE Number
PIPING CLASS A36 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 50 DEG.C 6
SERVICE DUTY CHEMICALS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, WAFER BODY,
POSITION INDICATOR

GENERAL 3,7
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER TITANIUM B381 F-2
STEM/TRUNIONS/PINS TITANIUM
DISC/PLATES/BALL TITANIUM
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2


FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. THE USE OF COMPACT/WAFER TYPE VALVE TO BE CONSIDERED AFTER ECONOMIC EVALUATION DURING DETAIL DESIGN

KDPC AgipKCO VALVE DATA SHEET - VBA1019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1020 Ref. Note
REDUCED BORE Number
PIPING CLASS A63 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 12"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 6
SERVICE DUTY SODIUM HYPOCHLORITE, HCl

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, 4


ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER LOW TEMP. CARBON STEEL ASTM A352-LCC + POLYPROPYLENE LINER
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL SELLER TO ADVISE
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE 1
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1020


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1021 Ref. Note
REDUCED BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1022 Ref. Note
REDUCED BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1030 Ref. Note
REDUCED BORE Number
PIPING CLASS A11,A13,A18,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA1030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1035 Ref. Note
REDUCED BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1037 Ref. Note
REDUCED BORE Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1038 Ref. Note
REDUCED BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1040 Ref. Note
REDUCED BORE Number
PIPING CLASS A21,A22,A62,A81,B82 Rating:PN40
VALVE DESIGN MANUFACTURERS STANDARD
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE PN40
DESIGN TEMP. -40 DEG.C to 160 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2, FIREWATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL,


ANTIBLOWOUT STEM, THREE PIECE BOLTED CONSTRUCTION,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION LEVER
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS PTFE
SPRINGS N/A
SEALS PTFE 1
GASKETS N/A
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 PART 1 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1040


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE:BALL VALVE TAG No.VBA1050 Ref. Note
REDUCED BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1510 Ref. Note
REDUCED BORE Number
PIPING CLASS A11,A13,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL OR TRUNION, ANTISTATIC 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA1510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1515 Ref. Note
REDUCED BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1515


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1517 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1517


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1521 Ref. Note
REDUCED BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT 5
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1521


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1522 Ref. Note
REDUCED BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL OR TRUNION, ANTISTATIC 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1522


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1530
REDUCED BORE Number
PIPING CLASS A11,A13,A18,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA1530


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1535 Ref. Note
REDUCED BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1535


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1537 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1537


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1538 Ref. Note
REDUCED BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT 5
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1538


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1550 Ref. Note
REDUCED BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1550


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3010 Ref. Note
REDUCED BORE Number
PIPING CLASS B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3015 Ref. Note
REDUCED BORE Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. '-40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3017 Ref. Note
REDUCED BORE Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. '-40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3021 Ref. Note
REDUCED BORE Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA3022 Ref. Note
REDUCED BORE Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA3022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3030 Ref. Note
REDUCED BORE Number
PIPING CLASS B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA3030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3035 Ref. Note
REDUCED BORE Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3037 Ref. Note
REDUCED BORE Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA3038 Ref. Note
REDUCED BORE Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3050 Ref. Note
REDUCED BORE Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA3050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3510 Ref. Note
REDUCED BORE Number
PIPING CLASS B11,B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL OR TRUNION, ANTISTATIC 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA3510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3530 Ref. Note
REDUCED BORE Number
PIPING CLASS B11, B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 10" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA3530


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6010 Ref. Note
REDUCED BORE Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA6010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6015 Ref. Note
REDUCED BORE Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6017 Ref. Note
REDUCED BORE Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6021 Ref. Note
REDUCED BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6022 Ref. Note
REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA6022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6030 Ref. Note
REDUCED BORE Number
PIPING CLASS C11,C13,C18,C19,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA6035 Ref. Note
REDUCED BORE Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6037 Ref. Note
REDUCED BORE Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6038 Ref. Note
REDUCED BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6050 Ref. Note
REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA6050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA6510 Ref. Note
REDUCED BORE Number
PIPING CLASS C11,C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA6510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6515 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6515


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6517 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long)
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6517


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6522 Ref. Note
REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6522


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6530 Ref. Note
REDUCED BORE Number
PIPING CLASS C11, C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA6530


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6535 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6535


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6537 Ref. Note
REDUCED BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6537


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6550 Ref. Note
REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA6550


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6730 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C11,C13,C18 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 10
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 10
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6"-24" (inc) - Sch 80, 28" - 26.92mm, 30"- 35.00mm
10. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6730


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6731 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C11,C13,C18 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6731


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA6737-C28 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C28 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-10" (inc) - Sch 60, 12"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA6737-C28


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6737-C31 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 40S, 8" - Sch 20, 10"-12" (inc) - Sch 40S, 14"-20" (inc) - Sch 40, 24" - Sch 60

KDPC AgipKCO VALVE DATA SHEET - VBA6737-C31


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6737-C82 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY ACID GAS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 40, 8"-14" (inc) - Sch 60, 16"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA6737-C82


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6738 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 40S, 8"-24" (inc) - Sch 60

KDPC AgipKCO VALVE DATA SHEET - VBA6738


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6739 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6739


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6740 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C28, C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6740


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6750 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 10
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" - 8" (inc) - Sch 120, 10"-24" (inc) - Sch 100
10. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA6750


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6751 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 28"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6751


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA8015 Ref. Note
REDUCED BORE Number
PIPING CLASS B22 Rating:800#
VALVE DESIGN MANUFACTURERS STANDARD
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE 50 barg
DESIGN TEMP. -40 DEG.C to 65 DEG.C 4
SERVICE DUTY WATER, AIR, N2

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL,


ANTIBLOWOUT STEM, THREE PIECE BOLTED CONSTRUCTION,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION LEVER
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL
SPRINGS N/A
SEALS SELLER TO ADVISE 1
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 PART 1 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA8015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9030 Ref. Note
REDUCED BORE Number
PIPING CLASS D11,D13,D65 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA9035 Ref. Note
REDUCED BORE Number
PIPING CLASS D15 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA9037 Ref. Note
REDUCED BORE Number
PIPING CLASS D28,D31,D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9038 Ref. Note
REDUCED BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9050 Ref. Note
REDUCED BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA9050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA9530 Ref. Note
REDUCED BORE Number
PIPING CLASS D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9530


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA9730 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D11,D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 10
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 10
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6"-24" (inc) - Sch 120
10. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9730


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9731 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D11,D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9731


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA9737-D28 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D28 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-24" (inc) - Sch 120

KDPC AgipKCO VALVE DATA SHEET - VBA9737-D28


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9737-D31 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D31 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-12" (inc) - Sch 60, 14"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA9737-D31


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9737-D82 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80, 8"-24" (inc) - Sch 100

KDPC AgipKCO VALVE DATA SHEET - VBA9737-D82


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9738 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 80S, 8"-24" (inc) - Sch 100

KDPC AgipKCO VALVE DATA SHEET - VBA9738


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9739 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9739


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9740 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D28, D31 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9740


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9750 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 10
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 16, 8"-16" (inc) - Sch 140, 18"-24" (inc) - Sch 120
10. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA9750


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9751 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA9751


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA15010 Ref. Note
REDUCED BORE Number
PIPING CLASS D11,D13,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA15010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15015 Ref. Note
REDUCED BORE Number
PIPING CLASS D15,E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS N/A 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15017 Ref. Note
REDUCED BORE Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15021 Ref. Note
REDUCED BORE Number
PIPING CLASS D04 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15022 Ref. Note
REDUCED BORE Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA15022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15030 Ref. Note
REDUCED BORE Number
PIPING CLASS E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA15035 Ref. Note
REDUCED BORE Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, CHEMICALS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15510 Ref. Note
REDUCED BORE Number
PIPING CLASS D13 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA15730 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS E11, Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 16"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, BLOWDOWN

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2" - 6" (inc) - XXS, 8" - 25.4mm, 10" - 31.75mm, 12" - 36.52mm, 14" - 39.70mm, 16" - 44.45mm

KDPC AgipKCO VALVE DATA SHEET - VBA15730


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15735 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY CHEMICALS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2",3" & 6" - Sch 160, 4" - Sch 120

KDPC AgipKCO VALVE DATA SHEET - VBA15735


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA25030 Ref. Note
REDUCED BORE Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA25035 Ref. Note
REDUCED BORE Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY CHEMICALS,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA25730 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 16"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2" - 12.70mm, 3" - 15.87mm, 4" - 20.65mm
6" - 27.00mm, 8" - 34.90mm, 10" - 41.27mm, 12" - 49.32mm, 14" - 53.97mm, 16" - 60.32mm

KDPC AgipKCO VALVE DATA SHEET - VBA25730


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA25735 Ref. Note
TOP ENTRY - REDUCED BORE Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY CHEMICALS

DESCRIPTION BI-DIRECTIONAL, REDUCED BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2",3" - XXS, 4" - 19.05mm, 6" - 27.00mm

KDPC AgipKCO VALVE DATA SHEET - VBA25735


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA1110 Ref. Note
FULL BORE Number
PIPING CLASS A11,A13,A18,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA1110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1115 Ref. Note
FULL BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1117 Ref. Note
FULL BORE Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1118 Ref. Note
FULL BORE Number
PIPING CLASS A35 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 6
SERVICE DUTY SULPHURIC ACID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER ALLOY 20 B462 N08020 / A351 CN7M
STEM/TRUNIONS/PINS ALLOY 20
DISC/PLATES/BALL ALLOY 20
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2


FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1118


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1119 Ref. Note
FULL BORE Number
PIPING CLASS A36 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 50 DEG.C 6
SERVICE DUTY CHEMICALS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, WAFER BODY,
POSITION INDICATOR

GENERAL 3,7
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER TITANIUM B381 F-2
STEM/TRUNIONS/PINS TITANIUM
DISC/PLATES/BALL TITANIUM
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2


FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. THE USE OF COMPACT/WAFER TYPE VALVE TO BE CONSIDERED AFTER ECONOMIC EVALUATION DURING DETAIL DESIGN

KDPC AgipKCO VALVE DATA SHEET - VBA1119


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1120 Ref. Note
FULL BORE Number
PIPING CLASS A63 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 12"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 6
SERVICE DUTY SODIUM HYPOCHLORITE, HCl

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS
BODY/BONNET/COVER LOW TEMP. CARBON STEEL ASTM A352-LCC + POLYPROPYLENE LINER
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL SELLER TO ADVISE
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE 1
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1120


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1121 Ref. Note
FULL BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1122 Ref. Note
FULL BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1130 Ref. Note
FULL BORE Number
PIPING CLASS A11,A13,A18,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA1130


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1135 Ref. Note
FULL BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER ,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1135


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1137 Ref. Note
FULL BORE Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1137


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1138 Ref. Note
FULL BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1138


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1140 Ref. Note
FULL BORE Number
PIPING CLASS A21,A22,A62 Rating:PN40
VALVE DESIGN MANUFACTURERS STANDARD
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE 40 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL,


ANTIBLOWOUT STEM, THREE PIECE BOLTED CONSTRUCTION,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION LEVER
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS PTFE
SPRINGS N/A
SEALS PTFE 1
GASKETS N/A
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 PART 1 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VBA1140


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1150 Ref. Note
FULL BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1610 Ref. Note
FULL BORE Number
PIPING CLASS A11,A13,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL OR TRUNION, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA1610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1615 Ref. Note
FULL BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1615


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1617 Ref. Note
FULL BORE Number
PIPING CLASS Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1617


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1621 Ref. Note
FULL BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT 5
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1621


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1622 Ref. Note
FULL BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL OR TRUNION, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA1622


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA1630 Ref. Note
FULL BORE Number
PIPING CLASS A11,A13,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA1630


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA1635 Ref. Note
FULL BORE Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1635


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1637 Ref. Note
FULL BORE Number
PIPING CLASS Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1637


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1638 Ref. Note
FULL BORE Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT 5
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA1638


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA1650 Ref. Note
FULL BORE Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA1650


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3110 Ref. Note
FULL BORE Number
PIPING CLASS B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA3110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3115 Ref. Note
FULL BORE Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3117 Ref. Note
FULL BORE Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3121 Ref. Note
FULL BORE Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA3122 Ref. Note
FULL BORE Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA3122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3130 Ref. Note
FULL BORE Number
PIPING CLASS B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA3130


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3135 Ref. Note
FULL BORE Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3135


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3137 Ref. Note
FULL BORE Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3137


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA3138 Ref. Note
FULL BORE Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA3138


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3150 Ref. Note
FULL BORE Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA3150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA3610 Ref. Note
FULL BORE Number
PIPING CLASS B11,B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 608, BS 5351, API 6D
SIZE RANGE 1/2" THRU 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL OR TRUNION, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10 LONG PATTERN
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA3610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA3630 Ref. Note
FULL BORE Number
PIPING CLASS B11, B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA3630


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6110 Ref. Note
FULL BORE Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA6110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6115 Ref. Note
FULL BORE Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6135 Ref. Note
FULL BORE Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6135


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA6117 Ref. Note
FULL BORE Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6121 Ref. Note
FULL BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6122 Ref. Note
FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VBA6122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6130 Ref. Note
FULL BORE Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6130


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA6137 Ref. Note
FULL BORE Number
PIPING CLASS C28,C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6137


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6138 Ref. Note
FULL BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6138


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6150 Ref. Note
FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA6610 Ref. Note
FULL BORE Number
PIPING CLASS C11,C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA6610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6615 Ref. Note
FULL BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6615


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6617 Ref. Note
FULL BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long)
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 625/825 + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6617


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6622 Ref. Note
FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6622


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6630 Ref. Note
FULL BORE Number
PIPING CLASS C11, C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 9
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VBA6630


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6635 Ref. Note
FULL BORE Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY,DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION BEVEL GEAR
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6635


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6650 Ref. Note
FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6650


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA6930 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C11,C13,C18 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 10
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 10
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6"-24" (inc) - Sch 80, 28" - 26.92mm, 30"- 35.00mm
10. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6930


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6931 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C11,C13,C18 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA6931


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA6937-C28 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C28 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-10" (inc) - Sch 60, 12"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA6937-C28


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6937-C31 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 40S, 8" - Sch 20, 10"-12" (inc) - Sch 40S, 14"-20" (inc) - Sch 40, 24" - Sch 60

KDPC AgipKCO VALVE DATA SHEET - VBA6937-C31


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6937-C82 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 40, 8"-14" (inc) - Sch 60, 16"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA6937-C82


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6938 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 40S, 8"-24" (inc) - Sch 60

KDPC AgipKCO VALVE DATA SHEET - VBA6938


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6939 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VERIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6939


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6940 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C28, C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA6940


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA6950 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" - 8" (inc) - Sch 120, 10"-24" (inc) - Sch 100
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6950


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA6951 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 28"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA6951


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA9130 Ref. Note
FULL BORE Number
PIPING CLASS D11,D13,D65 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9130


Job No. Document No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA9135 Ref. Note
FULL BORE Number
PIPING CLASS D15 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9135


Job No. Document No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA9137 Ref. Note
FULL BORE Number
PIPING CLASS D28,D31,D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS INCONEL X750
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9137


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9138 Ref. Note
FULL BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9138


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9150 Ref. Note
FULL BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA9150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA9630 Ref. Note
REDUCED BORE Number
PIPING CLASS D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY, DBB
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9630


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA9930 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D11,D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 10
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 10
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6"-24" (inc) - Sch 120
10. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9930


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9931 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D11,D13 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625) 9
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES STEM USE 316SS + ENP 75 µm, FOR BALL USE LTCS + ENP 75 µm

KDPC AgipKCO VALVE DATA SHEET - VBA9931


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA9937-D28 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D28 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-24" (inc) - Sch 120

KDPC AgipKCO VALVE DATA SHEET - VBA9937-D28


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9937-D31 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D31 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80S, 8"-12" (inc) - Sch 60, 14"-24" (inc) - Sch 80

KDPC AgipKCO VALVE DATA SHEET - VBA9937-D31


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9937-D82 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 10
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
10. PIPE WT - 6" -Sch 80, 8"-24" (inc) - Sch 100

KDPC AgipKCO VALVE DATA SHEET - VBA9937-D82


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9938 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 80S, 8"-24" (inc) - Sch 100

KDPC AgipKCO VALVE DATA SHEET - VBA9938


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9939 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 30"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9939


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9941 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D28, D31 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA9941


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BALL VALVE TAG No.VBA9950 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 6" - 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 10
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 6" -Sch 16, 8"-16" (inc) - Sch 140, 18"-24" (inc) - Sch 120
10. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA9950


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA9951 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 8" - 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA9951


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA15110 Ref. Note
FULL BORE Number
PIPING CLASS D11,D13,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 9
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VBA15110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA15115 Ref. Note
FULL BORE Number
PIPING CLASS D15,E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS N/A 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15117 Ref. Note
FULL BORE Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4
FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7,8
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 9
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
9. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15121 Ref. Note
FULL BORE Number
PIPING CLASS D04 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 6
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PCTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED. EXTENDED STEM REQUIREMENT TO BE VARIFIED
DURING DETAIL DESIGN
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15122 Ref. Note
FULL BORE Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBA15122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15130 Ref. Note
FULL BORE Number
PIPING CLASS E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15130


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA15135 Ref. Note
FULL BORE Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, CHEMICALS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15135


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA15610 Ref. Note
FULL BORE Number
PIPING CLASS D13 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, FLOATING BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT, THREE PIECE BODY OR TOP ENTRY
METAL TO METAL SEAT, POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION LEVER (max 450mm long)
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS SELLER TO ADVISE
SEAT BODY/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS OR LTCS
SEAT INSERTS 316SS OR EQUIVALENT
SPRINGS INCONEL X 750 if used
SEALS GRAPHITE 1,5
GASKETS 316SS + GRAPHITE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING SELLER TO ADVISE
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA15610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA15930 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS E11 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 16"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2" - 6" (inc) - XXS, 8" - 25.4mm, 10" - 31.75mm, 12" - 36.52mm, 14" - 39.70mm, 16" - 44.45mm

KDPC AgipKCO VALVE DATA SHEET - VBA15930


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA15935 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2",3" & 6" - Sch 160, 4" - Sch 120

KDPC AgipKCO VALVE DATA SHEET - VB15935


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BALL VALVE TAG No.VBA25110 Ref. Note
FULL BORE Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351, API 6D
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA25115 Ref. Note
FULL BORE Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351, API 6D
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY CHEMICALS,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY,
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS N/A
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA25130 Ref. Note
FULL BORE Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,PRODUCED WATER

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25130


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BALL VALVE TAG No.VBA25135 Ref. Note
FULL BORE Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 6
SERVICE DUTY CHEMICALS,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, SPLIT OR THREE PIECE BODY, DBB
POSITION INDICATOR

GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION WRENCH (max 450mm long), BEVEL GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH BODY CAVITY RELIEF.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBA25135


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:BALL VALVE TAG No.VBA25930 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 16"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2/A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316SS or ASTM A350-LF2 + CRA CLADDING (eg ALLOY 625)
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2" - 12.70mm, 3" - 15.87mm, 4" - 20.65mm
6" - 27.00mm, 8" - 34.90mm, 10" - 41.27mm, 12" - 49.32mm, 14" - 53.97mm, 16" - 60.32mm

KDPC AgipKCO VALVE DATA SHEET - VBA25930


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BALL VALVE TAG No.VBA25935 Ref. Note
TOP ENTRY - FULL BORE Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 6D
SIZE RANGE 2" - 6"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 6
SERVICE DUTY CHEMICALS

DESCRIPTION BI-DIRECTIONAL, FULL BORE, TRUNION MOUNTED BALL, ANTISTATIC, 4


FIRESAFE, ANTIBLOWOUT STEM, DBB, POSITION INDICATOR
TOP ENTRY
GENERAL 3
FACE TO FACE STD. API 6D
END CONNECTIONS BUTT WELD ASME B16.25 9
OPERATION LEVER (max 450mm long), GEAR FOR OTHERS
MATERIALS 7
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316 + ENP 75 µm
DISC/PLATES/BALL STAINLESS STEEL ASTM A182-F316
SEAT INSERTS PTFE OR APPROVED EQUAL 5
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE 1,5
GASKETS SELLER TO ADVISE 1,5
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL VALVES MUST BE PROVIDED WITH CAVITY PRESSURE RELIEVING SEATS.
5. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
6. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
7. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
9. PIPE WT - 2",3" - XXS, 4" - 19.05mm, 6" - 27.00mm

KDPC AgipKCO VALVE DATA SHEET - VBA25935


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BUTTERFLY VALVE TAG No. VBY1010 Ref. Note
Number
PIPING CLASS A21, Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE >= 2"
DESIGN PRESSURE 19 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 2
SERVICE DUTY FIRE WATER,SEA WATER

DESCRIPTION WAFER LUG TYPE THROUGH HOLES

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION LEVER (GEAR FOR 8" AND ABOVE)
MATERIALS
BODY/BONNET/COVER LTCS + EPDM LINER
STEM/TRUNIONS/PINS MONEL ASTM B164
DISC/PLATES/BALL LTCS + EPDM LINER/ ALUMINIUM-BRONZE
SEAT INSERTS EPDM
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A 3,4
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 609 -BODY & SEAT TESTS-

CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.

KDPC AgipKCO VALVE DATA SHEET - VBY1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BUTTERFLY VALVE TAG No. VBY1011 Ref. Note
Number
PIPING CLASS A81 Rating: 16 barg EEMUA150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE >= 2"
DESIGN PRESSURE 16 20 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 2
SERVICE DUTY SEA WATER

DESCRIPTION WAFER LUG TYPE TAPPED THROUGH HOLES

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER TAPPED BODY LUGS SUITABLE FOR MOUNTING BETWEEN
EEMUA 16 barg ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION LEVER (GEAR FOR 8" AND ABOVE)
MATERIALS
BODY/BONNET/COVER LTCS + EPDM LINER
STEM/TRUNIONS/PINS MONEL ASTM B164
DISC/PLATES/BALL LTCS + EPDM LINER/ ALUMINIUM-BRONZE
SEAT INSERTS EPDM
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A 3,4
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 609 -BODY & SEAT TESTS-

CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.

KDPC AgipKCO VALVE DATA SHEET - VBY1011


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE:BUTTERFLY VALVE TAG No. VBY1010EX3000 Ref. Note
Number
PIPING CLASS A21, Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE >= 2"
DESIGN PRESSURE 16 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 2
SERVICE DUTY FIRE WATER

DESCRIPTION WAFER LUG TYPE THROUGH HOLES


WITH STEM EXTENSION AND FLOOR COLUMN. EXTENDED LENGTH TO GIVE
3000mm FROM C/L OF VALVE TO C/L OF OPERATOR. FLOOR COLUMN
APPX. 700mm HIGH FROM FLOOR LEVEL
GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION LEVER (GEAR FOR 8" AND ABOVE)
MATERIALS
BODY/BONNET/COVER LTCS + EPDM LINER
STEM/TRUNIONS/PINS MONEL ASTM B164
DISC/PLATES/BALL LTCS + EPDM LINER/ ALUMINIUM-BRONZE
SEAT INSERTS EPDM
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A 3,4
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 609 -BODY & SEAT TESTS-

CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.

KDPC AgipKCO VALVE DATA SHEET - VBY1010EX3000


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BUTTERFLY VALVE TAG No. VBY1020EX3000 Ref. Note
Number
PIPING CLASS A62 Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE >= 2"
DESIGN PRESSURE 16 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 2
SERVICE DUTY FIRE WATER

DESCRIPTION DOUBLE FLANGED, DISC WITHIN VALVE BODY END TO END DIMENSION
WITH STEM EXTENSION AND FLOOR COLUMN. EXTENDED LENGTH TO GIVE
3000mm FROM C/L OF VALVE TO C/L OF OPERATOR. FLOOR COLUMN
APPX. 700mm HIGH FROM FLOOR LEVEL
GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS FLANGED ASME B16.5 CLASS 150LB RF

OPERATION LEVER (GEAR FOR 8" AND ABOVE) 5


MATERIALS
BODY/BONNET/COVER LTCS + EPDM LINER OR ALUMINIUM BRONZE
STEM/TRUNIONS/PINS MONEL ASTM B164/ ALUMINIUM BRONZE
DISC/PLATES/BALL LTCS + EPDM LINER/ ALUMINIUM-BRONZE/ 316SS
SEAT INSERTS EPDM
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 609 -BODY & SEAT TESTS-

CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. VALVE POSITION INDICATION REQUIRED AT OPERATNG LEVEL ON OPERATOR OR FLOOR COLUMN

KDPC AgipKCO VALVE DATA SHEET - VBY1020EX3000


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:BUTTERFLY VALVE TAG No. VBY1030 Ref. Note
Number
PIPING CLASS A11, A18 Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE 2" to 36"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 2
SERVICE DUTY AMINE, GLYCOL, ACID GAS, METHANOL, PRODUCED WATER

DESCRIPTION WAFER LUG TYPE THROUGH HOLES FIRESAFE

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER LUGS THROUGH HOLES SUITABLE FOR MOUNTING BETWEEN
150 LB RFASME B16.5 FLANGES
OPERATION MANUAL LEVER UP TO 6", GEAR FOR 8" AND ABOVE)/ACTUATED PNEUMATIC-MOTOR
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC/A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR EQUIVALENT
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 598 -BODY & SEAT TESTS-
Fugitive emission required yes no 7
CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2
FIRESAFE API607

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. REFER TO SERVICE INDEX FOR FLUID COMPOSITION FOR SEAT, SEAL MATERIAL SELECTION
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
AND DOC. KE01.00.000.KD.V.SS.0007.000, SPEC. FOR PIPING FORGING, CASTING AND PLATES FOR SOUR SERVICE
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBY1030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BUTTERFLY VALVE TAG No. VBY1035 Ref. Note
Number
PIPING CLASS A15 Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE 2" to 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 2
SERVICE DUTY AMINE, GLYCOL, CHEMICALS, ACID GAS, METHANOL

DESCRIPTION WAFER LUG TYPE THROUGH HOLES FIRESAFE

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER LUGS THROUGH HOLES SUITABLE FOR MOUNTING BETWEEN
150 LB RF ASME B16.5 FLANGES
OPERATION MANUAL LEVER UP TO 6", GEAR FOR 8" AND ABOVE)/ACTUATED PNEUMATIC-MOTOR
MATERIALS
BODY/BONNET/COVER SS ASTM A351-CF8M
STEM/TRUNIONS/PINS 316SS
DISC/PLATES/BALL SS ASTM A351-CF8M
SEAT INSERTS PTFE OR EQUIVALENT
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 598 -BODY & SEAT TESTS-
Fugitive emission required yes no 7
CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2
FIRESAFE API607

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. REFER TO SERVICE INDEX FOR FLUID COMPOSITION FOR SEAT, SEAL MATERIAL SELECTION
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
AND DOC. KE01.00.000.KD.V.SS.0007.000, SPEC. FOR PIPING FORGING, CASTING AND PLATES FOR SOUR SERVICE
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBY1035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BUTTERFLY VALVE TAG No. VBY1039 Ref. Note
Number
PIPING CLASS A17 Rating: 150 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE 2" to 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 2
SERVICE DUTY ACID GAS 8

DESCRIPTION WAFER LUG TYPE THROUGH HOLES FIRESAFE

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER LUGS THROUGH HOLES SUITABLE FOR MOUNTING BETWEEN
150 LB RF ASME B16.5 FLANGES
OPERATION MANUAL LEVER UP TO 6", GEAR FOR 8" AND ABOVE)/ACTUATED PNEUMATIC-MOTOR
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC/A350-LF2 + 6mm CA 9
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR EQUIVALENT
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 598 -BODY & SEAT TESTS-
Fugitive emission required yes no 7
CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2
FIRESAFE API607

Notes:
1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. REFER TO SERVICE INDEX FOR FLUID COMPOSITION FOR SEAT, SEAL MATERIAL SELECTION
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
AND DOC. KE01.00.000.KD.V.SS.0007.000, SPEC. FOR PIPING FORGING, CASTING AND PLATES FOR SOUR SERVICE
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. TO BE USED IN ACID GAS SERVICE FOR TEMPERATURE ABOVE DEW POINT ONLY
9. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VBY1039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BUTTERFLY VALVE TAG No. VBY1530 Ref. Note
Number
PIPING CLASS A11 Rating: 150 LB ASME B16.5/B16.47 -A
VALVE DESIGN API 609
SIZE RANGE 30" to 48"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 343 DEG.C 2
SERVICE DUTY ACID GAS 9

DESCRIPTION DOUBLE FLANGE, FIRESAFE

GENERAL 1
FACE TO FACE STD. ASME B16.10 8
END CONNECTIONS FLANGED 150 LB RFASME B16.47 SERIES A

OPERATION GEAR /ACTUATED PNEUMATIC-MOTOR


MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC/A350-LF2
STEM/TRUNIONS/PINS 316SS, 17-4PH or XM19 TO NACE MR0175 LATEST EDITION
DISC/PLATES/BALL 316SS or ASTM A350-LF2/A352 LCC
SEAT 316SS
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 598 -BODY & SEAT TESTS-
Fugitive emission required yes no 7
CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2
FIRESAFE API607

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. REFER TO SERVICE INDEX FOR FLUID COMPOSITION FOR SEAT, SEAL MATERIAL SELECTION
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
AND DOC. KE01.00.000.KD.V.SS.0007.000, SPEC. FOR PIPING FORGING, CASTING AND PLATES FOR SOUR SERVICE
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. DISC IN OPEN POSITION WITHIN VALVE BODY IS PREFERRED. VENDOR TO CONFIRM
9. TO BE USED IN ACID GAS SERVICE FOR TEMPERATURE ABOVE DEW POINT ONLY.

KDPC AgipKCO VALVE DATA SHEET - VBY1530


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:BUTTERFLY VALVE TAG No. VBY3010 Ref. Note
Number
PIPING CLASS B82 Rating: 20 barg EEMUA 145
VALVE DESIGN API 609
SIZE RANGE >= 2"
DESIGN PRESSURE 20 BARG
DESIGN TEMP. -40 DEG.C to 100 DEG.C 2
SERVICE DUTY SEA WATER, FIREWATER

DESCRIPTION WAFER LUG TYPE THROUGH HOLES

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER TAPPED BODY LUGS SUITABLE FOR MOUNTING BETWEEN
EEMUA 145 - 20 barg FLANGES
OPERATION LEVER (GEAR FOR 8" AND ABOVE)
MATERIALS
BODY/BONNET/COVER LTCS + EPDM LINER
STEM/TRUNIONS/PINS MONEL ASTM B164
DISC/PLATES/BALL LTCS + EPDM LINER/ ALUMINIUM-BRONZE
SEAT INSERTS EPDM
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A 3,4
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 609 -BODY & SEAT TESTS-

CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.

KDPC AgipKCO VALVE DATA SHEET - VBY3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:BUTTERFLY VALVE TAG No. VBY3035 Ref. Note
Number
PIPING CLASS B15 Rating: 300 LB ASME B16.5
VALVE DESIGN API 609
SIZE RANGE 2" to 24"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -45 DEG.C to 200 DEG.C 2
SERVICE DUTY AMINE, BLOWDOWN CHEMICALS, METHANOL, DEMIN WATER

DESCRIPTION WAFER LUG TYPE THROUGH HOLES FIRESAFE

GENERAL 1
FACE TO FACE STD. API 609
END CONNECTIONS WAFER LUGS THROUGH HOLES SUITABLE FOR MOUNTING BETWEEN
150 LB RF ASME B16.5 FLANGES
OPERATION MANUAL LEVER UP TO 6", GEAR FOR 8" AND ABOVE)/ACTUATED PNEUMATIC-MOTOR
MATERIALS
BODY/BONNET/COVER SS ASTM A351-CF8M
STEM/TRUNIONS/PINS 316SS
DISC/PLATES/BALL SS ASTM A351-CF8M
SEAT INSERTS PTFE OR EQUIVALENT
SPRINGS N/A
SEALS SELLER TO ADVISE 4
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING SELLER TO ADVISE 3,4
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES AND RESULTS TO API 598 -BODY & SEAT TESTS-
Fugitive emission required yes no 7
CERTIFICATION PRESSURE PARTS: ISO 10474/EN 10204 3.1B; OTHER= ISO 10474/EN 10204 2.2
FIRESAFE API607

Notes:

1. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
2. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
3. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
4. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
5. REFER TO SERVICE INDEX FOR FLUID COMPOSITION FOR SEAT, SEAL MATERIAL SELECTION
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
AND DOC. KE01.00.000.KD.V.SS.0007.000, SPEC. FOR PIPING FORGING, CASTING AND PLATES FOR SOUR SERVICE
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBY3035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG1010 Ref. Note
Number
PIPING CLASS A18 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 4
SERVICE DUTY HYDROCARBONS,AMINE,CAUSTIC SODA

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING FLEXIBLE GRAPHITE WITH ANTI-EXTRUSION RING 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG1030 Ref. Note
Number
PIPING CLASS A18 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 4
SERVICE DUTY HYDROCARBONS,AMINE,CAUSTIC SODA

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING FLEXIBLE GRAPHITE WITH ANTI-EXTRUSION RING 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG1030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG1040 Ref. Note
Number
PIPING CLASS A02,A22 Rating:PN40
VALVE DESIGN BS 5154
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE 40 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 3
SERVICE DUTY WATER, SEA WATER,AIR, N2

DESCRIPTION UNION BONNET,I.S.,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 2
FACE TO FACE STD. BS 5154
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 1
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE)
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598/BS 5154 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
3. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VG1040


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1041 Ref. Note
Number
PIPING CLASS A02,A22 Rating:150lb
VALVE DESIGN BS 5154
SIZE RANGE 2" THRU 10" 6
DESIGN PRESSURE 16 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2

DESCRIPTION BOLTED BONNET,I.S.,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. BS 5154
END CONNECTIONS FLANGED ASME 150LB FLAT FACE
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS N/A 1
BODY/BONNET BOLTING MANUFACTURERS STANDARD
GLAND BOLTING N/A 2
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598/BS 5154 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
6. VALVE SIZES 6" TO 10" GENERALLY IN ACCORDANCE WITH BS 5154

KDPC AgipKCO VALVE DATA SHEET - VG1041


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1050 Ref. Note
Number
PIPING CLASS A55 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY RAW WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1055 Ref. Note
Number
PIPING CLASS Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1060 Ref. Note
Number
PIPING CLASS A21,A24,A29,A55,A56,A62 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 4
SERVICE DUTY AIR,N2WATER,FUEL GAS,FUEL OIL

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1060


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1060EX3000 Ref. Note
Number
PIPING CLASS A21, A29, A62 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 4
SERVICE DUTY FIRE WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,REPL. SEAT


WITH STEM EXTENSION AND FLOOR COLUMN. EXTENDED LENGTH TO GIVE
3000mm FROM C/L OF VALVE TO C/L OF OPERATOR. FLOOR COLUMN
APPX. 700mm HIGH FROM FLOOR LEVEL
GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1060EX3000


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1065 Ref. Note
Number
PIPING CLASS A05 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 4
SERVICE DUTY POTABLE WATER,FIRE FOAM,DEMIN.WATER,AIR

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1065


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1070 Ref. Note
Number
PIPING CLASS A25 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY STEAM,CONDENSATE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1070


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG1160 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 340 DEG.C 4
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A216-WCB
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182 F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG1160


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG3010 Ref. Note
Number
PIPING CLASS B18 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 4
SERVICE DUTY HYDROCARBONS,AMINE,CAUSTIC SODA

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING FLEXIBLE GRAPHITE WITH ANTI-EXTRUSION RING 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG3030 Ref. Note
Number
PIPING CLASS B18 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 4
SERVICE DUTY HYDROCARBONS,AMINE,CAUSTIC SODA

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING FLEXIBLE GRAPHITE WITH ANTI-EXTRUSION RING 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG3030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG3050 Ref. Note
Number
PIPING CLASS Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG3050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG3055 Ref. Note
Number
PIPING CLASS Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG3055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG3060 Ref. Note
Number
PIPING CLASS Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY DEMIN WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG3060


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG3065 Ref. Note
Number
PIPING CLASS B22 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY POTABLE WATER,AIR

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG3065


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG3070 Ref. Note
Number
PIPING CLASS B25 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 12" - GEAR OP. 14" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG3070


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG6050 Ref. Note
Number
PIPING CLASS C25 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GATE VALVE TAG No.VG6051 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 430 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6051


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No.VG6055 Ref. Note
Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG6060 Ref. Note
Number
PIPING CLASS C21,C56 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 150 DEG.C 4
SERVICE DUTY WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 8" - GEAR OP. 10" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6060


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG6065 Ref. Note
Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 8" - GEAR OP. 10" & LARGER
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6065


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG6070 Ref. Note
Number
PIPING CLASS C25 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY STEAM,CONDENSATE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 8" - GEAR OP. 10" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6070


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GATE VALVE TAG No.VG6090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 8" - GEAR OP. 10" & LARGER
MATERIALS
BODY/BONNET/COVER CAST ALLOY STEEL ASTM A217 GR WC6
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL WC6 13 Cr FACED
SEAT STELLITE FACED
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B16 STUDS C/W ASTM A194-4 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG6090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8050 Ref. Note
Number
PIPING CLASS A21,A25,A56,B25,C21,C25,C56 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP-MP-HP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8051 Ref. Note
Number
A21,A24,A25,A29,A56,A62,B25,C21,C25
PIPING CLASS Rating:CLASS 800LB
,C56
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP-MP-HP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8051


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8052 Ref. Note
Number
PIPING CLASS A21,A24,A25,A29,A62,B25,C21,C25 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP-MP-HP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8052


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8055 Ref. Note
Number
PIPING CLASS A05 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY CHEMICALS,WATER,AIR,FIRE FOAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316L
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8056 Ref. Note
Number
PIPING CLASS A05,B22 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY CHEMICALS,WATER,AIR,FIRE FOAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8056


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GATE VALVE TAG No.VG8057 Ref. Note
Number
PIPING CLASS A05 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 5
SERVICE DUTY POTABLE WATER,FIRE WATER,DEMIN. WATER,AIR

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8057


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 5
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION WELDED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8091 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 5
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION WELDED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT FEMALE
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8091


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8092 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 5
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION WELDED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 X SCREWED NPT FEMALE
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8092


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8150 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8151 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8151


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG8152 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 800LB
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 340 DEG.C 5
SERVICE DUTY WATER,AIR,N2,FUEL OIL,FUEL GAS,LP STEAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 4
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG8152


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG9060 Ref. Note
Number
PIPING CLASS Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG9060


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG9065 Ref. Note
Number
PIPING CLASS Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG9065


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG9070 Ref. Note
Number
PIPING CLASS Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 600
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,FLEXIBLE WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 8" - GEAR OP. 10" & LARGER
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG9070


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG15050 Ref. Note
Number
PIPING CLASS Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG15050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No.VG15055 Ref. Note
Number
PIPING CLASS Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 602
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,SOLID WEDGE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VG15055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GATE VALVE TAG No. VG100080 Ref. Note
Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 14" 9
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET

GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 2, 4, 7,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING
VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm, 3" --> ID 65.54mm, 4" --> ID 84.27mm, 6" --> ID 124.06mm,
8" --> ID 161.51mm, 10" --> ID 201.3mm, 12" --> ID 238.75mm, 14" --> ID 262.16mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VG100080


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GATE VALVE TAG No. VG100081 Ref. Note
Number
PIPING CLASS P83 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 6" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY CHEMICALS

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET
OUTSIDE SCREW, RISING STEM.
GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A182 F44 - UNS S31254
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A182 F44 - UNS S31254 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.22mm, 1 1/2" --> ID 28.0mm, 2" --> ID 37.18mm, 3" --> ID 54.8mm, 4" --> ID 70.46mm, 6" --> ID 103.72mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N°KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG100081


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No. VG100082 Ref. Note
Number
PIPING CLASS P82 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 6" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET
OUTSIDE SCREW, RISING STEM.
GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.2mm, 1 1/2" --> ID 28.1mm, 2" --> ID 35.9mm, 3" --> ID 54.3mm, 4" --> ID 70.9mm, 6" --> ID 105.9mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N°KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG100082


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No. VG150083 Ref. Note
Number
PIPING CLASS R83 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 6" 5
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET
OUTSIDE SCREW, RISING STEM.
GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1 1/2" --> ID 25.3mm, 2" --> ID 32.3mm, 3" --> ID 49.3mm, 4" --> ID 64.3mm, 6" --> ID 96.3mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N°KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VG150083


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GATE VALVE TAG No. VG150080
Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" to 12" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET

GENERAL 3, 5,
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 2, 4,
BODY/BONNET/COVER ASTM A182 GR F22 mod 11
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 9,10
DISC/PLATES/BALL ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm, 3" --> ID 48.94mm, 4" --> ID 63.87mm, 6" --> ID 95.61mm, 8" --> ID 125.48mm, 10" --> ID 157.21mm, 12" --> ID 187.08mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
11. MODIFICATION OF MATERIAL AS STATED IN DOC. N° KE01.00.000.KD.P.ST.0014.000 SECTION E4

KDPC AgipKCO VALVE DATA SHEET - VG150080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GATE VALVE TAG No. VG150081 Ref. Note
Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 14" 9
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION SLAB GATE, FULL BORE THROUGH CONDUIT, TOP ENTRY BOLTED BONNET

GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 1,2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 40.5 44.49mm; 3"--> ID 59.68mm; 4" --> ID 76.73mm; 6" --> ID 112.96mm
8"--> ID 147.06mm; 10" --> ID 183.3mm; 12" --> ID 217.4mm; 14" --> ID 238.7mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VG150081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE:GLOBE VALVE TAG No.VGL1010 Ref. Note
Number
PIPING CLASS A11,A18 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1015 Ref. Note
Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL1017 Ref. Note
Number
PIPING CLASS A28,A63 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1018 Ref. Note
Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL1019 Ref. Note
Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL1019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1030 Ref. Note
Number
PIPING CLASS A11,A13,A18,A21,A24,A25,A65 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 14"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,AMINE,CAUSTIC SODA,WATER,AIR,N2,FUEL OIL,
LP STEAM
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VGL1030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No.VGL1035 Ref. Note
Number
PIPING CLASS A05,A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY POTABLE WATER,FIRE FOAM,DEMIN. WATER,AMINE,CHEMICALS,
HYDROCARBONS
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL1037 Ref. Note
Number
PIPING CLASS A28,A63 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 10"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No.VGL1038 Ref. Note
Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 270 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL1038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1039 Ref. Note
Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL1039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1040 Ref. Note
Number
PIPING CLASS A02,A22,A81,B82 Rating:PN40
VALVE DESIGN BS 5154
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE 40 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 3
SERVICE DUTY WATER, SEA WATER,AIR, N2, FIREWATER

DESCRIPTION UNION BONNET,I.S.,RISING STEM,PLUG TYPE DISC,


RENEWABLE DISC.

GENERAL 2
FACE TO FACE STD. BS 5154
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS 1
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE)
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598/BS 5154 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
3. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VGL1040


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1041 Ref. Note
Number
PIPING CLASS A02,A22 Rating:150lb
VALVE DESIGN BS 5154
SIZE RANGE 6" THRU 10" 6
DESIGN PRESSURE 16 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2

DESCRIPTION BOLTED BONNET,I.S.,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. BS 5154
END CONNECTIONS FLANGED ASME 150LB FLAT FACE
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS ALUMINIUM BRONZE ASTM B150-C64200 OR EQUAL
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS N/A 1
BODY/BONNET BOLTING MANUFACTURERS STANDARD
GLAND BOLTING MANUFACTURERS STANDARD
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598/BS 5154 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
6. VALVE SIZE 6" GENERALLY IN ACCORDANCE WITH BS 5154

KDPC AgipKCO VALVE DATA SHEET - VGL1041


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL1160 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 200 DEG.C 4
SERVICE DUTY AIR,WATER,N2,FUEL OIL,WASTE WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A216-WCB
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182 F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL1160


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3010 Ref. Note
Number
PIPING CLASS B11,B18 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL3015 Ref. Note
Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3017 Ref. Note
Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3018 Ref. Note
Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3019 Ref. Note
Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS
WELL FLUID
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL3019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL3030 Ref. Note
Number
PIPING CLASS B11,B13,B18,B25,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 10"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
LP STEAM/CONDENSATE,DEMIN WATER
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VGL3030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No.VGL3035 Ref. Note
Number
PIPING CLASS B15,B22 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3037 Ref. Note
Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL3038 Ref. Note
Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL3038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL3039 Ref. Note
Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL3039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL6010 Ref. Note
Number
PIPING CLASS C11,C18 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,WELL FLUID

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No.VGL6015 Ref. Note
Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL6017 Ref. Note
Number
PIPING CLASS C28,C31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL6018 Ref. Note
Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL6019 Ref. Note
Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL6019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL6030 Ref. Note
Number
PIPING CLASS C11,C13,C18,C21,C25,C61,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 14"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,STEAM/CONDENSATE,WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RF RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VGL6030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No.VGL6035 Ref. Note
Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL6037 Ref. Note
Number
PIPING CLASS C28,31 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RF RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL6038 Ref. Note
Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL6038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL6039 Ref. Note
Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RF RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VGL6039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL6090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS
BODY/BONNET/COVER CAST ALLOY STEEL ASTM A217 GR WC6
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL WC6 13 Cr FACED
SEAT STELLITE FACED
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B16 STUDS C/W ASTM A194-4 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL6090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8050 Ref. Note
Number
A13,A21,A25,A65,B13,B25,B65,C13,C21
PIPING CLASS Rating:CLASS 800LB
,C25,C65
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE,AIR,
WATER,N2,LUBE OIL,LP STEAM
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8051 Ref. Note
Number
PIPING CLASS A24 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8051


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8052 Ref. Note
Number
PIPING CLASS Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8052


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8055 Ref. Note
Number
PIPING CLASS A05 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY CHEMICALS,WATER,AIR,FIRE FOAM

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8056 Ref. Note
Number
PIPING CLASS B22 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY POTABLE WATER, AIR

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8056


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8057 Ref. Note
Number
PIPING CLASS Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8057


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8058 Ref. Note
Number
PIPING CLASS A35 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY SULPHURIC ACID

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER ALLOY 20 B462 N08020 / A351 CN7M
STEM/TRUNIONS/PINS ALLOY 20
DISC/PLATES/BALL ALLOY 20
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TOADVISE 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8058


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8059 Ref. Note
Number
PIPING CLASS A36 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 50 DEG.C 4
SERVICE DUTY CHEMICALS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER TITANIUM B381 F-2
STEM/TRUNIONS/PINS TITANIUM
DISC/PLATES/BALL TITANIUM
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TOADVISE 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8059


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION WELDED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8150 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8151 Ref. Note
Number
PIPING CLASS Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8151


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL8152 Ref. Note
Number
PIPING CLASS Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11 x SCREWED NPT (FEMALE)
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS 13% Cr ASTM A276 TP 410
DISC/PLATES/BALL 13% Cr ASTM A182-F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR

KDPC AgipKCO VALVE DATA SHEET - VGL8152


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL9030 Ref. Note
Number
PIPING CLASS D11,D13,D65 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VGL9030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL9035 Ref. Note
Number
PIPING CLASS D15 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL9035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL9037 Ref. Note
Number
PIPING CLASS D28,D31,D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL9037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL9038 Ref. Note
Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 6" - GEAR OP. 8" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL9038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL9039 Ref. Note
Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 900LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 4" - GEAR OP. 6" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED.

KDPC AgipKCO VALVE DATA SHEET - VGL9039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL15010 Ref. Note
Number
PIPING CLASS D11,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VGL15010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL15015 Ref. Note
Number
PIPING CLASS D15,E15 Rating:CLASS 1500LB ASME B16.5
BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL15017 Ref. Note
Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5,7
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 8
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL
8. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL15018 Ref. Note
Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL15019 Ref. Note
Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VGL15019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL15030 Ref. Note
Number
PIPING CLASS E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 3" - GEAR OP. 4" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL15035 Ref. Note
Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, CHEMICALS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 3" - GEAR OP. 4" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL15050 Ref. Note
Number
PIPING CLASS D13 Rating:CLASS 1500LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. N/A
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL15050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL25010 Ref. Note
Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL25010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL25015 Ref. Note
Number
PIPING CLASS Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION HANDWHEEL
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL25015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No.VGL25030 Ref. Note
Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 2" - GEAR OP. 3" & LARGER
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL25030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:GLOBE VALVE TAG No.VGL25035 Ref. Note
Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 1873
SIZE RANGE 2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, CHEMICALS

DESCRIPTION BOLTED BONNET,O.S. & Y,RISING STEM,PLUG TYPE DISC,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION HANDWHEEL UPTO & INCL. 2" - GEAR OP. 3" & LARGER
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
Trim No.(In acc. with API 600
TRIM No.10
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VGL25035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:GLOBE VALVE TAG No. VGL100080 Ref. Note
Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 4" 9
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID

DESCRIPTION GLOBE VALVE, TOP ENTRY BOLTED BONNET


GENERAL 3, 5,
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm, 3" --> ID 65.54mm, 4" --> ID 84.27mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VGL100080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE: GLOBE VALVE TAG No. VGL100081 Ref. Note
Number
PIPING CLASS P83 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY CHEMICALS

DESCRIPTION TOP ENTRY BOLTED BONNET, OUTSIDE SCREW, RISING STEM

GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A182 F44 - UNS S31254
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A182 F44 - UNS S31254 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.22mm, 1 1/2" --> ID 28.0mm, 2" --> ID 37.18mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.001

KDPC AgipKCO VALVE DATA SHEET - VGL100081


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE: GLOBE VALVE TAG No. VGL100082 Ref. Note
Number
PIPING CLASS P82 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 4" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION TOP ENTRY BOLTED BONNET, OUTSIDE SCREW, RISING STEM

GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.2mm, 1 1/2" --> ID 28.1mm, 2" --> ID 35.9mm, 3" --> ID 54.3mm, 4" --> ID 70.9mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.001

KDPC AgipKCO VALVE DATA SHEET - VGL100082


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:GLOBE VALVE TAG No. VGL150080 Ref. Note
Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" to 6" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION GLOBE VALVE, TOP ENTRY BOLTED BONNET

GENERAL 3, 5,
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 2, 4
BODY/BONNET/COVER ASTM A182 GR F22 mod 11
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 10
DISC/PLATES/BALL ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V. -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm, 3" --> ID 48.94mm, 4" --> ID 63.87mm, 6" --> ID 95.61mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
11. MODIFICATION OF MATERIAL AS STATED IN DOC. N° KE01.00.000.KD.P.ST.0014.000 SECTION E4

KDPC AgipKCO VALVE DATA SHEET - VGL150080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:GLOBE VALVE TAG No. VGL150081 Ref. Note
Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 4" 9
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION GLOBE VALVE, TOP ENTRY BOLTED BONNET

GENERAL 3, 5,
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 1,2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 40.5 44.49mm; 3"--> ID 59.68mm; 4" --> ID 76.73mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VGL150081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE: GLOBE VALVE TAG No. VGL150083 Ref. Note
Number
PIPING CLASS R83 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 4" 5
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION TOP ENTRY BOLTED BONNET, OUTSIDE SCREW, RISING STEM

GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY)
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1 1/2" --> ID 25.3mm, 2" --> ID 32.3mm, 3" --> ID 49.3mm, 4" --> ID 64.3mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.001

KDPC AgipKCO VALVE DATA SHEET - VGL150083


Job No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:CHECK VALVE TAG No.VC1010 Ref. Note
Number
PIPING CLASS A11,A18 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1015 Ref. Note
Number
PIPING CLASS A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC1015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1017 Ref. Note
Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC1017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1018 Ref. Note
Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.

KDPC AgipKCO VALVE DATA SHEET - VC1018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1019 Ref. Note
Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 6
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC1019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1020 Ref. Note
Number
PIPING CLASS A62,A63 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN MANUFACTURERS STANDARD
SIZE RANGE 1/2" THRU 12"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY SODIUM HYPOCHLORITE,HCl

DESCRIPTION LINED SPRUNG DISC WAFER CHECK VALVE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STD
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
MATERIALS
BODY/END PLATE LOW TEMP. CARBON STEEL / STAINLESS STEEL PFA LINED
DISC PTFE or CERAMIC
SEAT PTFE
SEAT INSERTS N/A
SPRINGS TITANIUM or PFA COATED
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC1020


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1030 Ref. Note
Number
PIPING CLASS A11,A13,A18,A21,A24,A25,A29,A62 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE,AIR,
WATER,N2,LUBE OIL,LP STEAM
DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 6
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VC1030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1035 Ref. Note
Number
PIPING CLASS A05,A15 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
POTABLE WATER,AIR,DEMIN.WATER
DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC1035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1037 Ref. Note
Number
PIPING CLASS A28 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC1037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1038 Ref. Note
Number
PIPING CLASS A04 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC1038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1039 Ref. Note
Number
PIPING CLASS A17 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 6
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = ISO 10474/EN 10204 3.1.B.;TRIM = ISO 10474/EN 10204 2.2

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC1039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1040 Ref. Note
Number
PIPING CLASS A02,A22,A81,B82 Rating:PN40
VALVE DESIGN BS 5154
SIZE RANGE 1/2" THRU 4"
DESIGN PRESSURE 40 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2, FIREWATER

DESCRIPTION SWING TYPE,SCREW CAP,INTEGRAL SEAT

GENERAL 3
FACE TO FACE STD. BS 5154
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION N/A
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598/BS 5154 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC1040


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC1041 Ref. Note
Number
PIPING CLASS A02,A22,A81 Rating:150lb
VALVE DESIGN BS 5154
SIZE RANGE 2" >=
DESIGN PRESSURE 16 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS MANUFACTURERS STANDARD
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC1041


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC1160 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 250 DEG.C 4
SERVICE DUTY AIR,WATER,N2,FUEL OIL,WASTE WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 150LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A216-WCB
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL 13% Cr ASTM A217-CA15 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC1160


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3010 Ref. Note
Number
PIPING CLASS B11,B18 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
WELL FLUID
DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3015 Ref. Note
Number
PIPING CLASS B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC3015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3017 Ref. Note
Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL
SEALS N/A
GASKETS SPIRAL WOUND INC 825 WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC3017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3018 Ref. Note
Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.

KDPC AgipKCO VALVE DATA SHEET - VC3018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC3019 Ref. Note
Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 300LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 6
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC3019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC3030 Ref. Note
Number
PIPING CLASS B11,B13,B18,B25,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE
LP STEAM/CONDENSATE,DEMIN WATER
DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 6
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VC3030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC3035 Ref. Note
Number
PIPING CLASS B15,B22 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC3035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3037 Ref. Note
Number
PIPING CLASS B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,LP CONDENSATE,PRODUCED WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC3037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC3038 Ref. Note
Number
PIPING CLASS B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC3038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC3039 Ref. Note
Number
PIPING CLASS B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300LB RF SMOOTH FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 6
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC3039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC3041 Ref. Note
Number
PIPING CLASS B82 Rating:300lb 20 barg
VALVE DESIGN BS 5154
SIZE RANGE 2" >=
DESIGN PRESSURE 20 barg
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY WATER, SEA WATER,AIR, N2, FIREWATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 300 150 LB RF/FF SMOOTH FLANGES
OPERATION N/A
MATERIALS
BODY/BONNET/COVER ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
STEM/TRUNIONS/PINS
DISC/PLATES/BALL ALUMINIUM BRONZE ASTM B148-C95200 OR EQUAL
SEAT INSERTS N/A
SPRINGS MANUFACTURERS STANDARD
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS & TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC3041


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6010 Ref. Note
Number
PIPING CLASS C11 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,WELL FLUID

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC6010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC6015 Ref. Note
Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC6015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC6017 Ref. Note
Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL
SEALS N/A
GASKETS RING TYPE JOINT
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC6017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6018 Ref. Note
Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.

KDPC AgipKCO VALVE DATA SHEET - VC6018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6019 Ref. Note
Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 6
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC6019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6030 Ref. Note
Number
PIPING CLASS C11,C13,C21,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,STEAM/CONDENSATE,WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 6
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VC6030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6035 Ref. Note
Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC6035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC6037 Ref. Note
Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC6037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6038 Ref. Note
Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC6038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6039 Ref. Note
Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 6
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC6039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC6090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY STEAM,CONDENSATE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 600LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER CAST ALLOY STEEL ASTM A217 GR WC6
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL WC6 13 Cr FACED
SEAT STELLITE FACED
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC6090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8050 Ref. Note
Number
A13,A21,A25,A65,B13,B25,B65,C13,C21
PIPING CLASS Rating:CLASS 800LB
,C25,C65
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,PRODUCED WATER,AMINE,AIR,
WATER,N2,LUBE OIL,LP STEAM
DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8051 Ref. Note
Number
PIPING CLASS A24 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION N/A
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8051


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8055 Ref. Note
Number
PIPING CLASS A05 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY CHEMICALS,WATER,AIR,FIRE FOAM

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8055


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8056 Ref. Note
Number
PIPING CLASS B22 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY POTABLE WATER, AIR

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SCREWED NPT (FEMALE)
OPERATION N/A
MATERIALS
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B8 STUDS C/W ASTM A194-8 HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8056


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8058 Ref. Note
Number
PIPING CLASS A35 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 4
SERVICE DUTY SULPHURIC ACID

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER ALLOY 20 B462 N08020 / A351 CN7M
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALLOY 20
SEAT INSERTS N/A
SPRINGS SELLER TO ADVISE
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8058


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8059 Ref. Note
Number
PIPING CLASS A36 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. '-40 DEG.C to 50 DEG.C 4
SERVICE DUTY CHEMICALS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER TITANIUM B381 F-2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL TITANIUM
SEAT INSERTS N/A
SPRINGS SELLER TO ADVISE
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
SELLER TO ADVISE
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. THE USE OF COMPACT/WAFER TYPE VALVE TO BE CONSIDERED AFTER ECONOMIC EVALUATION DURING DETAIL DESIGN

KDPC AgipKCO VALVE DATA SHEET - VC8059


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8090 Ref. Note
Number
PIPING CLASS C40 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION HORIZONTAL BALL, WELDED COVER, SPRING RETURN,

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS SELLER TO ADVISE
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING N/A 2
GLAND BOLTING N/A
GLAND PACKING GRAPHITE
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC8150 Ref. Note
Number
PIPING CLASS A01,A03 Rating:CLASS 800LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 250 DEG.C 4
SERVICE DUTY AIR,WATER,N2,FUEL OIL,WASTE WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER CARBON STEEL ASTM A105
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL 13% Cr ASTM A182 F6 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER 1
BODY/BONNET BOLTING ASTM A193-B7 STUDS C/W ASTM A194-2H HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.8
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC8150


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC9030 Ref. Note
Number
PIPING CLASS D11,D13,D65 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 900LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 6
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
6. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VC9030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC9035 Ref. Note
Number
PIPING CLASS D15 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 900LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC9035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC9037 Ref. Note
Number
PIPING CLASS D28,D31,D82 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 900LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC9037


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC9038 Ref. Note
Number
PIPING CLASS D04 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 4
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 900LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC9038


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC9039 Ref. Note
Number
PIPING CLASS D17 Rating:CLASS 900LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 900LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC + 6mm CA 6
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC9039


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC15010 Ref. Note
Number
PIPING CLASS D11,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC15010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC15015 Ref. Note
Number
PIPING CLASS D15,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC15015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC15017 Ref. Note
Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,WELL FLUID,
WASTE WATER
DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,
REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5,6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825
SEAT INSERTS N/A
SPRINGS INCONEL
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. THE USE OF LTCS+625 CLADDING TO BE CONSIDERED IF COMMERCIALY ECONOMICAL

KDPC AgipKCO VALVE DATA SHEET - VC15017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC15018 Ref. Note
Number
PIPING CLASS D04 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 150 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. VALVES MUST BE SUITABLE FOR THE DESIGN TEMP. SPECIFIED.

KDPC AgipKCO VALVE DATA SHEET - VC15018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC15019 Ref. Note
Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 6
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VC15019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC15030 Ref. Note
Number
PIPING CLASS E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS,WELL FLUID,

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 1500LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75

KDPC AgipKCO VALVE DATA SHEET - VC15030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC15035 Ref. Note
Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, CHEMICALS

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 1500LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75

KDPC AgipKCO VALVE DATA SHEET - VC15035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC15050 Ref. Note
Number
PIPING CLASS D13 Rating:CLASS 1500LB
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS SOCKET WELD to ASME B16.11
OPERATION N/A
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VC15050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC25010 Ref. Note
Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,PRODUCED WATER

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC25010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC25015 Ref. Note
Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 1 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY CHEMICALS,WELL FLUID

DESCRIPTION HORIZONTAL BALL, BOLTED COVER, SPRING RETURN,


REPLACEABLE SEAT.

GENERAL 3
FACE TO FACE STD. ASME B16.10
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS N/A
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS 316 SS
SEALS N/A
GASKETS RING TYPE JOINT 1
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
TRIM No.12
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS: EN 10204 3.1B; OTHER= EN 10204 2.2 and ISO 10474

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175

KDPC AgipKCO VALVE DATA SHEET - VC25015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No.VC25030 Ref. Note
Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID,PRODUCED WATER

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 2500LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A352-LCC
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL STAINLESS STEEL A182-F316 STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75

KDPC AgipKCO VALVE DATA SHEET - VC25030


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No.VC25035 Ref. Note
Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN API 594
SIZE RANGE 2" >=
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 250 DEG.C 4
SERVICE DUTY CHEMICALS,WELL FLUID

DESCRIPTION WAFER, DUAL PLATE

GENERAL 3
FACE TO FACE STD. API 594
END CONNECTIONS WAFER SUITABLE FOR MOUNTING BETWEEN
ASME B16.5 CLASS 2500LB RING TYPE JOINT FLANGES
OPERATION N/A
MATERIALS 5
BODY/BONNET/COVER STAINLESS STEEL ASTM A351-CF8M
STEM/TRUNIONS/PINS STAINLESS STEEL A182-F316
DISC/PLATES/BALL STAINLESS STEEL A182-F316
SEAT INSERTS N/A
SPRINGS INCONEL X-750
SEALS N/A
GASKETS N/A
BODY/BONNET BOLTING N/A
GLAND BOLTING N/A
GLAND PACKING N/A
Trim No.(In acc. with API 600
N/A
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2 and ISO 10474

Notes:
1. N/A
2. N/A
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR 01 75

KDPC AgipKCO VALVE DATA SHEET - VC25035


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:CHECK VALVE TAG No. VC100080 Ref. Note
Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 14" 9
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID

DESCRIPTION SWING CHECK,TOP ENTRY, ANTI SLAM DEVICE EQUIPPED


GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm, 3" --> ID 65.54mm, 4" --> ID 84.27mm, 6" --> ID 124.06mm,
8" --> ID 161.51mm, 10" --> ID 201.3mm, 12" --> ID 238.75mm, 14" --> ID 262.16mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VC100080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:CHECK VALVE TAG No. VC100081 Ref. Note
Number
PIPING CLASS P83 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 6" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY CHEMICALS

DESCRIPTION SWING CHECK,TOP ENTRY (1" & 1 1/2" PISTON)


GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER ASTM A182 F44 - UNS S31254
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A182 F44 - UNS S31254 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.22mm, 1 1/2" --> ID 28.0mm, 2" --> ID 37.18mm, 3" --> ID 54.8mm, 4" --> ID 70.46mm, 6" --> ID 103.72mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VC100081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:CHECK VALVE TAG No. VC100082 Ref. Note
Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1"- 2" 9
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID

DESCRIPTION PISTON CHECK,TOP ENTRY


GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL/PISTON ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm,
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VC100082


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:CHECK VALVE TAG No. VC100083 Ref. Note
Number
PIPING CLASS P82 Rating: 10000 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 6" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION SWING CHECK,TOP ENTRY (1" & 1 1/2" PISTON)


GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.2mm, 1 1/2" --> ID 28.1mm, 2" --> ID 35.9mm, 3" --> ID 54.3mm, 4" --> ID 70.9mm, 6" --> ID 105.9mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VC100083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:CHECK VALVE TAG No. VC150080 Ref. Note
Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2 to 12" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION SWING CHECK,TOP ENTRY, ANTI SLAM DEVICE EQUIPPED

GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION MANUAL (GEAR IF NECESSARY) OR MOTORISED.
MATERIALS 2, 4
BODY/BONNET/COVER ASTM A182 GR F22 mod 11
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 9,10
DISC/PLATES/BALL ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm, 3" --> ID 48.94mm, 4" --> ID 63.87mm, 6" --> ID 95.61mm, 8" --> ID 125.48mm, 10" --> ID 157.21mm, 12" --> ID 187.08mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
11. MODIFICATION OF MATERIAL AS STATED IN DOC. N° KE01.00.000.KD.P.ST.0014.000 SECTION E4

KDPC AgipKCO VALVE DATA SHEET - VC150080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:CHECK VALVE TAG No. VC150081 Ref. Note
Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" to 14" 9
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WEL FLUID

DESCRIPTION SWING CHECK,TOP ENTRY, ANTI SLAM DEVICE EQUIPPED

GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 1,2, 4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission required yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 40.5 44.49mm; 3"--> ID 59.68mm; 4" --> ID 76.73mm; 6" --> ID 112.96mm
8"--> ID 147.06mm; 10" --> ID 183.3mm; 12" --> ID 217.4mm; 14" --> ID 238.7mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VC150081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE:CHECK VALVE TAG No. VC150082 Ref. Note
Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION PISTON CHECK,TOP ENTRY

GENERAL 3, 5
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION
MATERIALS 2, 4
BODY/BONNET/COVER ASTM A182 GR F22 mod 11
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 9,10
DISC/PLATES/BALL/PISTON ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS SELLER TO ADVISE
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
11. MODIFICATION OF MATERIAL AS STATED IN DOC. N° KE01.00.000.KD.P.ST.0014.000 SECTION E4

KDPC AgipKCO VALVE DATA SHEET - VC150082


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:CHECK VALVE TAG No. VC150083 Ref. Note
Number
PIPING CLASS R83 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 6" 5
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION SWING CHECK,TOP ENTRY (1" & 1 1/2" PISTON)


GENERAL 2
FACE TO FACE STD. MANUFACTURER STANDARD
END CONNECTIONS BUTT WELDED
OPERATION N/A
MATERIALS 4
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS SELLER TO ADVISE
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1 1/2" --> ID 25.3mm, 2" --> ID 32.3mm, 3" --> ID 49.3mm, 4" --> ID 64.3mm, 6" --> ID 96.3mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VC150083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : INTEGRAL DOUBLE BLOCK TAG No.VBB15010 Ref. Note
VALVE ASSEMBLY Number
PIPING CLASS E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK REDUCED BORE (1/2" FB)
BALL VALVE, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET

MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBB15010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : INTEGRAL DOUBLE BLOCK TAG No.VBB15015 Ref. Note
VALVE ASSEMBLY Number
PIPING CLASS E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY CHEMICALS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK REDUCED BORE (1/2" FB)
BALL VALVE, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET

MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBB15015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE : INTEGRAL DOUBLE BLOCK TAG No.VBB25010 Ref. Note
VALVE ASSEMBLY Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK REDUCED BORE (1/2" FB)
BALL VALVE, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT INLET/OUTLET

MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBB25010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : INTEGRAL DOUBLE BLOCK TAG No.VBB25015 Ref. Note
VALVE ASSEMBLY Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY CHEMICALS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK REDUCED BORE (1/2" FB)
BALL VALVE, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT INLET/OUTLET

MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VBB25015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:DOUBLE BLOCK TAG No. VBB100080 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 8
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID
DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, FLANGE API 6A 1 13/16" OTHER END

MATERIALS 2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VBB100080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK TAG No. VBB100082 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P83 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY CHEMICALS
DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES 9

GENERAL 2
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, CLAMPED HUB CONNECTOR OTHER END 10

MATERIALS
BODY/BONNET/COVER ASTM A182 F44 - UNS S31254
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A182 F44 - UNS S31254 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.22mm, 1 1/2" --> ID 28.0mm, 2" --> ID 37.18mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE
10. CLAMP PROFILE TO BE PROVIDED BY COMPANY

KDPC AgipKCO VALVE DATA SHEET - VBB100082


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK TAG No. VBB100083 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P82 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL
DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES 9

GENERAL 2
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, FLANGE API 6A 1 13/16" OTHER END

MATERIALS
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.2mm, 1 1/2" --> ID 28.1mm, 2" --> ID 35.9mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE

KDPC AgipKCO VALVE DATA SHEET - VBB100083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK TAG No. VBB150080 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, FLANGE API 6A 1 13/16" OTHER END

MATERIALS 2, 4
BODY/BONNET/COVER ASTM A182 GR F22 mod
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 9,10
DISC/PLATES/BALL ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING SELLER TO ADVISE 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm, 3" --> ID 48.94mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VBB150080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK TAG No. VBB150081 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2"
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, FLANGE API 6A 1 13/16" OTHER END

MATERIALS 1,2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission required yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING
VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 40.5mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VBB150081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK TAG No. VBB150083 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R83 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 2" 5
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION INTEGRAL DOUBLE BLOCK COMPACT GATE VALVE WITH OUT VENT VALVES 9

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ONE END, FLANGE API 6A 1 13/16" OTHER END

MATERIALS
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6,7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6,7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1 1/2" --> ID 25.3mm, 2" --> ID 32.3mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE

KDPC AgipKCO VALVE DATA SHEET - VBB150083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3010 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A11,A13,A18,A65,B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
WELL FLUID
DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB3010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3011 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A11,A13,A18,A65,B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE 2" x 1/2" - ONE END 2" , OTHER END 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
WELL FLUID
DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB3011


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3015 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A15,A17,B15,B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3017 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A17,A28,A63,B17,B28 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3018 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A35 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 100 DEG.C 5
SERVICE DUTY SULPHURIC ACID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS
BODY/BONNET/COVER ALLOY 20 B462-UNS N08020
STEM/TRUNIONS/PINS ALLOY 20 B462-UNS N08020
DISC/PLATES/BALL ALLOY 20 B462-UNS N08020
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3018


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3019 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A36 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 50 DEG.C 5
SERVICE DUTY CHEMICALS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS
BODY/BONNET/COVER TITANIUM B381 F-2
STEM/TRUNIONS/PINS TITANIUM
DISC/PLATES/BALL TITANIUM
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3019


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3021 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A04,B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3022 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A17,B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VALVES SHALL HAVE 316L SS , WELD OVERLAY ON SEAT POCKET
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB3022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3023 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A17,B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE 2" x 1/2" - ONE END 2" , OTHER END 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VALVES SHALL HAVE 316L SS , WELD OVERLAY ON SEAT POCKET
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB3023


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3110 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A11,A13,A18,A65,B11,B13,B18,B65 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
WELL FLUID
DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB3110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3115 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A15,B15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3117 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A28,B28,A63 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3121 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A04,B04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3122 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A17,B17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB3122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3510 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A11,A13,A65,B11,B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
WELL FLUID
DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 8
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VDB3510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3511 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 2" x 1/2" - ONE END 2" , OTHER END 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3511


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3515 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS + ENP
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3515


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3517 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3517


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3521 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 340 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS + ENP
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3521


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB3522 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS A17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB3522


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3610 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A11,A13,A65,B11,B13 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE
WELL FLUID
DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 8
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VDB3610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3615 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A15 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,GLYCOL,METHANOL,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS + ENP
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3615


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3621 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A04 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 350 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS + ENP
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB3621


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB3622 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS A17 Rating:CLASS 300LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 300LB RF 125-250 MICROINCH Ra INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB3622


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6010 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB6010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6011 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE 2" x 1/2" - ONE END 2" , OTHER END 1/2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB6011


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6015 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6017 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6021 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6022 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VALVES SHALL HAVE 316L SS , WELD OVERLAY ON SEAT POCKET
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB6022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6050 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C25 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK GLOBE VALVE WITH NEEDLE
BLEED VALVE c/w PLUG

BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VDB6050


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6090 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C40 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5352
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -29 DEG.C to 430 DEG.C 4
SERVICE DUTY HP STEAM/CONDENSATE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK GLOBE VALVE WITH NEEDLE
BLEED VALVE c/w PLUG

BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS
BODY/BONNET/COVER 1 1/4 Cr - 1/2 Mo STEEL ASTM A182 Gr F11
STEM/TRUNIONS/PINS 13 Cr
DISC/PLATES/BALL 13 Cr STELLITE FACED SEAT
SEAT INSERTS N/A
SPRINGS N/A
SEALS GRAPHITE
GASKETS SELLER TO ADVISE 1
BODY/BONNET BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A193 B8 OR B16 STUDS C/W ASTM A194-8 OR 4 HEAVY HEX.NUTS
GLAND PACKING GRAPHITE 1
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.

KDPC AgipKCO VALVE DATA SHEET - VDB6090


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6110 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C11,C13,C18,C65 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

KDPC AgipKCO VALVE DATA SHEET - VDB6110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6115 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C15 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6117 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C28,C31,C82 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6121 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C04 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6122 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB6122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6510 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C11,C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 8
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VDB6510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6515 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS + ENP
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6515


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6517 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,PRODUCED WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 625/825 B564-UNS N06625/N08825
STEM/TRUNIONS/PINS ALLOY 625/825 B564-UNS N06625/N08825
DISC/PLATES/BALL ALLOY 625/825 B564-UNS N06625/N08825 + TUNGSTEN/CHROMIUM CARBIDE
SEAT INSERTS ALLOY 625/825 B564-UNS N06625/N08825 OR EQUIVALENT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB6517


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB6522 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB6522


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6610 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C11,C13 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175 FOR SOUR SERVICE 8
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VAVES SELLER TO ADVISE

KDPC AgipKCO VALVE DATA SHEET - VDB6610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB6622 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS C17 Rating:CLASS 600LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 600LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS SELLER TO ADVISE, CRA MATERIAL TO NACE MR0175
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB6622


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15010 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D11,D13,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

VALVE DATA SHEET - VDB15010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15015 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D15,E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15017 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15017


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15021 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D04 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15021


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15022 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VALVES SHALL HAVE 316L SS , WELD OVERLAY ON SEAT POCKET
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE SELECTIVE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB15022


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15110 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D11,D13,D65,E11 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910 8
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175 FOR SOUR VALVES
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. FOR NON-SOUR VALVES USE 316SS

VALVE DATA SHEET - VDB15110


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15115 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D15,E15 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15115


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15117 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D28,D31,D82 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,MP CONDENSATE,PRODUCED WATER,GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER ALLOY 825 B564-UNS N08825
STEM/TRUNIONS/PINS ALLOY 825 B564-UNS N08825
DISC/PLATES/BALL ALLOY 825 B564-UNS N08825
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15117


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15121 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D04 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -120 DEG.C to 200 DEG.C 5
SERVICE DUTY BLOWDOWN,FLARE

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A193-B8M STUDS C/W ASTM A194-8M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES MUST BE SUITABLE FOR THE DESIGN SPECIFIED
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15121


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15122 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D17 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,CLOSED DRAINS

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 + 6mm CA 8
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
8. VENDOR TO CONFIRM THAT 6 MM CORROSION ALLOWANCE CAN BE ACCOMMODATED WITH
A FULLY FUNCTIONAL VALVE, OTHERWISE CRA CLADDING (SEAT POCKET AREAS AND SEALING AREAS)
OR SOLID NACE COMPLIANT CRA WILL BE REQUIRED

KDPC AgipKCO VALVE DATA SHEET - VDB15122


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB15510 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS D13 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15510


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK & TAG No.VDB15610 Ref. Note
BLEED VALVE ASSEMBLY FULL BORE Number
PIPING CLASS D13 Rating:CLASS 1500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 3/4" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 340 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE, METAL TO METAL SEAT
FULL BORE
GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 1500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL TUNGSTEN/CHROMIUM CARBIDE ON 316 SS
SEAT INSERTS METAL TO METAL SEAT 4
SPRINGS N/A
SEALS GRAPHITE 1,4
GASKETS GRAPHITE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-598 - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB15610


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 1
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB25010 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS F11 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS, GLYCOL,WELL FLUID

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2
STEM/TRUNIONS/PINS CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB25010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE : MODULAR DOUBLE BLOCK TAG No.VDB25015 Ref. Note
& BLEED VALVE ASSEMBLY Number
PIPING CLASS F15 Rating:CLASS 2500LB ASME B16.5
VALVE DESIGN BS 5351
SIZE RANGE 1/2" THRU 2"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 DEG.C 5
SERVICE DUTY HYDROCARBONS,DEMIN.WATER,AMINE,WELL FLUID,WASTE WATER

DESCRIPTION ONE OR TWO PIECE FORGED BODY, DOUBLE BLOCK BALL VALVE WITH NEEDLE
BLEED VALVE c/w PLUG, ANTISTATIC, ANTI-BLOWOUT STEM(S),
FIRESAFE
BORE SIZE 10mm MIN. THROUGH FOR ALL.FOR 2" NS ONLY, BORE TO BE NOMINAL SIZE AT THE FLANGE

GENERAL 3
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS FLANGED ASME B16.5 2500LB RING TYPE JOINT INLET/OUTLET
1/2" NPT SCREWED AND PLUGGED BLEED
MATERIALS 6
BODY/BONNET/COVER STAINLESS STEEL ASTM A182-F316
STEM/TRUNIONS/PINS 316 SS
DISC/PLATES/BALL 316 SS
SEAT INSERTS PTFE OR APPROVED EQUAL 4
SPRINGS N/A
SEALS SELLER TO ADVISE 1,4
GASKETS SELLER TO ADVISE 1,4
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING N/A
PRESSURE TESTING PROCEDURES & RESULTS TO BS 6755 Pt 1/API-6D - BODY & SEAT TEST
Fugitive emission requirement yes no 7
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2
FIRESAFE - API SPC 6FA

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. SEAT AND SEAL MATERIALS SHALL NOT BE SUSCEPTIBLE TO EXPLOSIVE DECOMPRESSION.
5. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
6. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
7. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VDB25015


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3
TYPE:DOUBLE BLOCK & BLEED TAG No. VDB100080 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 8
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID
DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES
THROUGH BORE SIZE 10mm MIN. AT THE FLANGE BORE TO BE NOMINAL SIZE
GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED PROCESS, FLANGE API 6A 1 13/16" INSTRUMENT
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS 2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VDB100080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 4
TYPE:DOUBLE BLOCK & BLEED TAG No. VDB100081 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P81 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 8
DESIGN PRESSURE 624 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY WELL FLUID
DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES
THROUGH BORE SIZE 10mm MIN. AT THE FLANGE BORE TO BE NOMINAL SIZE
GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED ENDS
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS 2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 24.62mm, 2" --> ID 44.47mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VDB100081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK & BLEED TAG No. VDB100082 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P83 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY CHEMICALS
DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES IN SERIES

GENERAL 2
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED PROCESS, CLAMPED HUB CONNECTOR INSTRUMENT 10
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS
BODY/BONNET/COVER ASTM A182 F44 - UNS S31254
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A182 F44 - UNS S31254 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.22mm, 1 1/2" --> ID 28.0mm, 2" --> ID 37.18mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE
10. CLAMP PROFILE TO BE PROVIDED BY COMPANY

KDPC AgipKCO VALVE DATA SHEET - VDB100082


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK & BLEED TAG No. VDB100083 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS P82 Rating: 10,000 psi (API 6A) 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 2" 5
DESIGN PRESSURE 689 barg
DESIGN TEMP. -40 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL
DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH 9
TWO NEEDLE VENT VALVES IN SERIES

GENERAL 2
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED PROCESS, FLANGE API 6A 1 13/16" INSTRUMENT
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 3
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6, 7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1" --> ID 15.2mm, 1 1/2" --> ID 28.1mm, 2" --> ID 35.9mm,
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE

KDPC AgipKCO VALVE DATA SHEET - VDB100083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK & BLEED TAG No. VDB150080 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R81 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 2" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS

DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES
THROUGH BORE SIZE 10mm MIN. AT THE FLANGE BORE TO BE NOMINAL SIZE
GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED PROCESS, FLANGE API 6A 1 13/16" INSTRUMENT
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS 2, 4
BODY/BONNET/COVER ASTM A182 GR F22 mod
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718 9,10
DISC/PLATES/BALL ALLOY 625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING SELLER TO ADVISE 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission requirement yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING -36°C to +121°C
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
2" --> ID 32.14mm, 3" --> ID 48.94mm
9. HARDFACING SHALL BE IN ACCORDANCE WITH KE01.00.000.KD.P.ST.0014.000 "Technical Supply
Requirements for Valves"
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VDB150080


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE:DOUBLE BLOCK AND BLEED COMPACT GATE TAG No. VDB150081 Ref. Note
Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2"
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES
THROUGH BORE SIZE 10mm MIN. AT THE FLANGE BORE TO BE NOMINAL SIZE
GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED PROCESS, FLANGE API 6A 1 13/16" INSTRUMENT
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS 1,2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission required yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING
VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 40.5 44.49mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VDB150081


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 5
TYPE:DOUBLE BLOCK AND BLEED TAG No. VDB150082 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R82 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1" to 2" 8
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 121 DEG.C 7
SERVICE DUTY ACID GAS, WELL FLUID

DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH
TWO NEEDLE VENT VALVES

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED BOTH ENDS
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS 1,2,4,8
BODY/BONNET/COVER ALLOY 625 B446-UNS N06625
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ALLOY 625 B446-UNS N06625 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 10
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL4 REQUIREMENTS)
Fugitive emission required yes no 5
CERTIFICATION ACCORDING TO API 6A (PSL 4 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. ONLY FORGED MATERIAL ALLOWED
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING
VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
5. FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000
6. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
7. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
8. THE USE OF ASTM A182 Gr. F22 (API 6A mod. 60K) + 3mm ALLOY 625 CLADDING IS ACCEPTABLE
SUBJECT TO COMPANY APPROVAL
9. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVAILABILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES:
1" --> ID 22.42mm; 2" --> ID 44.49mm
10. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.

KDPC AgipKCO VALVE DATA SHEET - VDB150082


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DOUBLE BLOCK AND BLEED TAG No. VDB150083 Ref. Note
COMPACT GATE ASSEMBLY Number
PIPING CLASS R83 Rating: 12,500 psi 1
VALVE DESIGN API 6A
SIZE RANGE 1 1/2" to 2" 5
DESIGN PRESSURE 830 barg
DESIGN TEMP. -36 DEG.C to 95 DEG.C 4
SERVICE DUTY METHANOL

DESCRIPTION INTEGRAL DOUBLE BLOCK AND BLEED COMPACT GATE VALVE WITH 9
TWO NEEDLE VENT VALVES

GENERAL 3,5
FACE TO FACE STD. MANUFACTURERS STANDARD
END CONNECTIONS BUTT WELDED BOTH ENDS
VENT AUTOCLAVE TYPE 9/16" PLUGGED
MATERIALS
BODY/BONNET/COVER ASTM A694 F60
STEM/TRUNIONS/PINS Nickel Alloy 718 - UNS N07718
DISC/PLATES/BALL ASTM A694 F60 + HARDFACING 6
SEAT INSERTS N/A
SPRINGS N/A
SEALS N/A
GASKETS SELLER TO ADVISE
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6,7
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 6,7
GLAND PACKING SELLER TO ADVISE
PRESSURE TESTING PROCEDURES & RESULTS TO API 6A (PSL3 REQUIREMENTS)
Fugitive emission requirement yes no
CERTIFICATION ACCORDING TO API 6A (PSL 3 REQUIREMENTS)

Notes:
1. TEMPERATURE RATING AS PER API 6A GROUPS L+V.
2. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESITANT WIRE.
3. HARDFACING AS PER APPENDIX F OF DOC. N° KE01.00.000.KD.P.ST.0014.000
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. VALVES SHALL BE SIZED TO MATCH THE RELEVANT PIPE ID. DEPENDING ON MANUFACTURERS STD DESIGN VALVES
AVALAIBILITY, ALTERNATIVE SIZES WILL BE CONSIDERED CASE BY CASE. THE VALVES WILL BE DESIGNATED WITH THE
RELEVANT PIPE OD. FOR NOMINAL ID REQUIREMENTS REFER TO FOLLOWING VALUES :
1 1/2" --> ID 25.3mm, 2" --> ID 32.3mm
6. SELLER TO ADVICE MFR STANDARD MATERIAL FOR SUCH APPLICATION.
7. BOLTING SHALL BE ZINC COATING (HOT-DIP) TO ISO 1461
8. FOR TECHNICAL SUPPLY REQUIREMENTS REFER DOC. N° KE01.00.000.KD.P.ST.0014.000
9. BASE OF BODY BLOCK TO BE DRILLED AND TAPPED WITH TWO 3/4" DIA 8-UNC TO A DEPTH OF 35mm FOR SUPPORT PLATE

KDPC AgipKCO VALVE DATA SHEET - VDB150083


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 0
TYPE:DIAPHRAGM VALVE TAG No.VDP1010 Ref. Note
Number
PIPING CLASS A18 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN SELLER TO ADVISE
SIZE RANGE 1/2" THRU 8"
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 75 DEG.C 4
SERVICE DUTY CAUSTIC SODA

DESCRIPTION BOLTED BONNET, WEIR TYPE

GENERAL 3
FACE TO FACE STD. ASME B16.10 SELLER TO ADVISE
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra
OPERATION HANDWHEEL
MATERIALS
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 OR A352 GR LCC 6
STEM/TRUNIONS/PINS SELLER TO ADVISE
DISC/PLATES/BALL SELLER TO ADVISE
SEAT INSERTS N/A
SPRINGS N/A
DIAPHRAGM EPDM
GASKETS N/A 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING N/A
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 5
Trim No.(In acc. with API 600
1998)
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST

CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
6. STAINLESS STEEL MATERIAL WILL BE ACCEPTED AS ALTERNATIVE

KDPC AgipKCO VALVE DATA SHEET - VDP1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 2
TYPE:PLUG VALVE (JACKETED) TAG No.VP1010 Ref. Note
Number
PIPING CLASS A16 Rating:CLASS 150LB ASME B16.5
VALVE DESIGN SELLER TO ADVISE/GENERALLY AS PER BS5353/API599
SIZE RANGE 1" THRU 12" 7
DESIGN PRESSURE ASME B16.34
DESIGN TEMP. -40 DEG.C to 200 240 DEG.C 4
SERVICE DUTY LIQUID SULPHUR

DESCRIPTION BOLTED BONNET FULLY JACKETED DESIGN, SHORT PATTERN,FULL PORT,FIRE


TYPE TESTED,ANTISTATIC DESIGN WITH TWO 3/4" NB CONNECTIONS
TO ALLOW STEAM IN/OUT OF JACKET
EACH OF THE TWO 3/4" JACKET CONNECTIONS SHALL BE PROVIDED WITH A 8
SW 150lb FLANGE TO ASME B16.5
GENERAL 3
FACE TO FACE STD. ASME B16.10 (SELLER TO ADVISE)
END CONNECTIONS FLANGED ASME B16.5 150LB RF SMOOTH FINISH 125-250 MICROINCH Ra 7
OPERATION LEVER UPTO 4", GEAR OPERATED FOR 6" & ABOVE OR ACTUATOR
MATERIALS 5
BODY/BONNET/COVER LOW TEMPERATURE CARBON STEEL ASTM A350-LF2 OR A352 GR LCC
PLUG CRA MATERIAL TO NACE MR0175 eg UNS S20910
DISC/PLATES/BALL N/A
JACKET ASTM A516 GR 65 OR EQUAL (IMPACT TESTED @-40°C MIN)
JACKET FLANGE ASTM A350 GR LF2
SEALS PTFE SLEEVE LOCKED IN VALVE BODY 10
GASKETS SPIRAL WOUND 316 SS WITH GRAPHITE FILLER (SELLER TO ADVISE) 1
BODY/BONNET BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS 2
GLAND BOLTING ASTM A320-L7M STUDS C/W ASTM A194-7M HEAVY HEX.NUTS
GLAND PACKING NON-ASBESTOS (SELLER TO ADVISE) 6
PRESSURE TESTING PROCEDURES & RESULTS TO API-598 - BODY & SEAT TEST
(BODY & JACKET) HYDROTEST: 1.5 X ASME B16.5 ALLOWABLE FLANGE RATING 9
Fugitive emission requirement yes no 11
CERTIFICATION PRESSURE PARTS = EN 10204 3.1.B.;TRIM = EN 10204 2.2

Notes:
1. ASBESTOS IS NOT ACCEPTABLE FOR SEALS & GASKETS.
2. BONNET/COVER/ENDS RETAINED BY AT LEAST 4 BOLTS.
3. VALVES SHALL BE MARKED IN ACCORDANCE WITH MSS-SP-25,IN ADDITION A STAINLESS STEEL TAG SHOWING

VALVE TAG No.SHALL BE SECURELY ATTACHED TO THE VALVE WITH CORROSION RESISTANT WIRE.
4. VALVES WILL NOT BE OPERATED BELOW -5 DEG.C.
5. ALL PROCESS WETTED PARTS (including bolting) SHALL MEET THE REQUIREMENTS OF NACE MR0175
6. IF GRAPHITE PACKING IS OFFERED IT SHALL CONTAIN SUITABLE CORROSION INHIBITOR
7. VALVE FLANGE SIZE TO BE 1 SIZE OVERSIZE TO GIVE
NOMINAL BORE 1" 2" 3" 4" 6" 8" 10" 12" 20"
OVERSIZED FLANGE SIZE 2" 3" 4" 6" 8" 10" 12" 16" 18"
8 CONNECTIONS SHOULD BE SUITABLY ORIANTED FOR 'STEAM IN' AND CONDENSATE OUT'
9 JACKET AND VALVE TO BE TESTED SEPARATELY
10 PTFE SLEEVE TO SERVE AS SELF LUBRICATING SEAL AGAINST LEAKAGE THROUGH PORTS AND TO THE ATMOSPHERE
11 FUGITIVE EMISSION REQUIREMENTS AS PER APPENDIX G OF DOC. N° KE01.00.000.KD.P.ST.0014.000

KDPC AgipKCO VALVE DATA SHEET - VP1010


Job No. Document No. Rev No.
180303 KE01.00.000.KD.P.TD.0015.000 3

You might also like