4

LOW POWER | Solutions

Low Wattage Valves: 0.48 to 2 W

Intrinsically Safe and Non-Incendive Field Wiring

Harsh Environment and Magnetic Latching Valves

Electronically Enhanced Valves

w w w. a s c o v a l v e . c o m
 LOW POWER SOLUTIONS
4
ASCO Low Power solenoid valves are the ideal choice for customers seeking to reduce their power consumption
without compromising performance. With wattages as low as 0.48 watts, the valves can be used in a variety of
industrial, commercial and process applications ranging from plant control systems with low power limitations
to offshore and other remote installations using solar panels or batteries. ASCO Low Power valves allow power
generation and power storage equipment size to be minimized for considerable savings and are suitable for
General Purpose service and environments requiring Intrinsic Safety and Non-Incendive Field Wiring. Certified
by Exida, the valves are SIL 3 capable per IEC 61508 and carry UL, CSA, CE and FM approvals.

0.55 W to 1.4 W Low Power

Featuring a molded one-piece solenoid and highly efficient solenoid cartridge,
ASCO’s 0.55 and 1.4 watt Low Power valves are “Green” solutions that reduce tem-
perature rise, reduce wiring costs, increase battery life and provide energy savings.
The 0.55 watt valves are ideal for use in remote applications requiring solar power or
battery charging circuits, while the 1.4 watt valves provide PLC and DCS compatibility
for BUS networks and traditional wiring. Both of these valves are proven in use and
have undergone 3rd party evaluation by Exida per IEC 61508. They are available in
2/2 and 3/2 Normally Closed, 3/2 Universal, 4/2, 5/2 and 5/3 constructions.

Intrinsically Safe (IS) and Non-Incendive Field Wiring (NIFW)

ASCO’s IS and NIFW Series valves are designed solely for installation in intrinsically
safe or non-incendive field wiring areas with properly approved and sized current
and voltage-limiting safety barriers. They feature a 0.48 watt IS or NIFW solenoid
enclosure that provides corrosion resistance in harsh environments, polarity pro-
tected coils and triple redundant diodes to prevent electrical pulses from flowing
back into hazardous areas. The valves have been classified by the National Electric
Code for use in areas requiring Class I, II, and III, Division 1 (IS) or 2 (NIFW),
including Groups A-G approval and are SIL 3 capable per IEC 61508.

0.55 W and 1.3 W Harsh Environment

ASCO’s Harsh Environment valves are designed specifically for applications where
the environment is extremely hot, humid and highly corrosive and where power con-
sumption is minimal. With their rugged 316L Stainless Steel body, high flow and low
wattage coil, these valves are the ideal choice for use in control panels in offshore
oil platforms, remote solar panels and battery operated applications. The Harsh
Environment valves also feature quick exhaust constructions for fast shut down of
valves and actuators. The valves carry UL, CSA, ATEX, and IECEX approvals on all
constructions and are SIL 3 capable per IEC 61508.

2
4

Electrically Enhanced (Next Generation)

ASCO’s 2 watt Next Generation voltage ranging solenoid valves can help lower
energy and inventory costs. The new technology accepts both AC and DC
voltages without sacrificing flow or pressure specifications and eliminates the
need for AC output cards, reduces wiring costs and provides safer working
environments for users operating on DC. Each coil has built-in electrical surge
suppression that protects from external voltage spikes and eliminates the need
for additional surge protection. The valves carry UL, CSA and CE approval and
select series are certified SIL 3 capable by Exida.

Magnetic Latching Valves

ASCO’s 2 and 3-way Direct Acting Magnetic Latching Valves are ideal for
use in remote applications where continuously powered devices cannot be
used, such as gas well equipment and irrigation systems. By utilizing a
magnetic latching system, the valves do not consume any power when left
in the latched position. They feature brass or rugged stainless steel bodies,
and 3-way models have an explosion-proof coil for increased durability.

Intrinsically Safe & Magnetic Latching

Next Generation Non-Incendive (0 W Latched)
Type Series 0.55 W 1.4 W Voltage Ranging (2 W) Field Wiring (0.35 W) (14.2 / 33.2 W Energized)

8223
2-Way
8262

8314

8316
3-Way
Harsh Environment
(8317/8320/8321)

Maglatch (HV)

8344

4-Way 8345

8551/8553

3
 2/2•3/2•4/2
5/2•5/3
0.55 W Low Power Solenoid Valves
4
SERIES
Aluminum, Brass, or Stainless Steel Bodies
Low 1/4" to 1" NPT
Power

Nominal Ambient Temp. Ranges Important

Series Body Material Normal Temperature Range High Ambient Temp. Version These solenoid valves are intended for use on clean dry air or inert
8553 Stainless Steel gas, filtered to 40 micrometres or better. The dew point of the media
-40°F to 140°F (-40°C to 60°C) should be at least 10°C (18°F) below the minimum temperature to
8551 Brass
Not Available which any portion of the clean air/inert gas system could be exposed
8553 -13°F to 140°F (-25°C to 60°C)
Aluminum to prevent freezing. If lubricated air is used, the lubricants must be
8551 5°F to 140°F (-15°C to 60°C)
8551 Stainless Steel compatible with Nitrile elastomers. Diester oils may cause operational
8262 problems. Instrument air in compliance with ANSI/ISA Standard
-40°F to 149°F (-40°C to 65°C) 7.0.01-1996 exceeds the above requirements and is, therefore, an
8314
8317 Brass / Stainless Steel Low Limit is the same as Normal acceptable media for these valves.
Temperature Ratings, but High
8316* -20°F to 149°F (-29°C to 65°C) Limit is 176°F (80°C)
8223
8344 -4°F to 149°F (-20°C to 65°C)
Brass only
8316H334
*Does not include 8316H334; Includes 8316J374. Note: 8553 not available in brass

Specifications (English units)

Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Brass Body Stainless Steel Body
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
2/2 VALVES, NORMALLY CLOSED, with NBR Disc
1/4 1/16 .06 0 130 149 8262H320 †† 1 8262H386 †† 1
3/8 5/16 1.5 10 130 149 8223H323 2 - -
1/2 3/8 3.2 25 130 149 8223H303 3 8223H310
3
3/2 VALVES, UNIVERSAL OPERATION (Normally Closed or Normally Open) with NBR Disc – SIL 3 Capable, Certified by Exida  
1/4 1/20 .06 .06 0 130/105  149 8314H300 †† 4 8314H301 †† 5
3/2 VALVES, NORMALLY CLOSED (Closed when de-energized) with NBR Disc or FPM, as Listed – SIL 3 Capable, Certified by Exida 
1/4 5/16 1.5 1.5  130 149 8316H301  6 EV8316H381
6
3/8 5/16 1.8 1.8  130 149 8316H302  6 EV8316H382
6
3/8 5/8 4 4  130 149 8316H303  6 - -
1/2 5/8 4 4  130 149 8316H304  6 EV8316H384
6
3/4 11/16 5.5 5.5 10 130 149 8316J374  7 - -
1 1 13 13 10 130 8316H334 
149 8 - -
3/2 VALVES, UNIVERSAL (Normally Closed or Normally Open) "Quick Exhaust" with NBR Diaphragm and NBR Disc
1/4  .06 .73 5 130 149 8317H307 9 8317H308
10
4/2 VALVES, Brass Body with NBR Disc
Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Single Solenoid Dual Solenoid
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
1/4 1/4 .80 1 10 130 149 8344H370  11 8344H344 † 12
3/8 3/8 1.5 2.2 10 130 149 8344H372  13 8344H380 † 14
1/2 3/8 1.5 2.2 10 130 149 8344H374  13 8344H382 † 14
3/4 3/4 5.2 5.6 10 130 149 8344H376  15 8344H354 † 16
1 3/4 5.2 5.6 10 130 149 8344H378  15 8344H356 † 16
Note: Pilot core discs are low-temperature NBR. Adding Suffix V (FKM) does NOT change the pilot core discs material. Suffix V (FKM) is not available on Series 8551 and 8553.
There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
 For "Quick Exhaust" valves, pressure port is 1/16", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
 Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when selection gasket
is in the internal position.

Can be used for dry natural gas service (no agency approvals) with the EF or EV prefix without manual operator.
 Normally closed = 130 psi. Normally open = 105 psi.
 Solenoid only approvals with EF or EV prefix, no approvals with general purpose coil (no prefix).
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.
 SIL 3 Capable, Certified by Exida, only valid when used as Normally Closed.
† Dual solenoid 8344 requires minimum pressure of 20 psi. Single solenoid version has 10 psi minimum pressure requirement.
†† UL/CSA approved for use with dry natural gas or propane gas with EF or EV prefix without manual operator.

4
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Specifications (English units)

Single Solenoid – SIL 3 Capable, Certified by Exida  Dual Solenoid
Operating Pressure Operating Pressure
Differential (psi) Differential (psi)
Pipe Orifice Cv Air-Inert Gas Max. Air-Inert Gas Max.
Body Size Size Flow Fluid Catalog Const. Fluid Catalog Const.
Material (in) (in) Factor Min. Max. Temp.˚F Number Ref. Min. Max. Temp.˚F Number Ref.
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals
Aluminum 3/2 8551H305  17 8551H306  17
Aluminum 5/2 8551H317  18 8551H318  18
Aluminum 5/3 Center Closed - 18 8551H367  18
Aluminum 5/3 Center Open - 18 8551H368  18
1/4 1/4 .86
Brass 3/2 EF8551H307  17 EF8551H308  17
Brass 5/2 EF8551H319  18 EF8551H320  18
35 130 149 30 130 149
316L Stainless Steel 3/2 EV8551H313 
 17 EV8551H314 
 17
316L Stainless Steel 5/2 EV8551H321 
18 EV8551H322 
18
Aluminum 3/2 8553H305  17 8553H306  17
Aluminum 5/2 8553H317  18 8553H318  18
1/2 1/2 3.7
316L Stainless Steel 3/2 EV8553H313 
 17 EV8553H314 
 17
316L Stainless Steel 5/2 EV8553H321 
 18 EV8553H322 
 18
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals, NAMUR Mount
Aluminum 3/2, 5/2 8551H301 19 8551H302 19
Aluminum 5/3 Center Closed - - 8551H365  20
Aluminum 5/3 Center Open 1/4 1/4 .86 - - 8551H366  20
Brass 3/2, 5/2 35 130 149 EF8551H303  19 30 130 149 EF8551H304  19
316L Stainless Steel 3/2, 5/2 EV8551H309 
20 EV8551H310 
20
Aluminum 3/2, 5/2 8553H301  20 8553H302  20
1/2 1/2 3.7
316L Stainless Steel 3/2, 5/2 EV8553H309 
 20 EV8553H310 
 20
1/8" NPT exhaust for 1/4" aluminum and brass.
 Brass construction supplied standard with EF solenoid.
 Stainless steel construction supplied standard with EV solenoid.

Can be used for dry natural gas service (no agency approvals) with the EF or EV prefix without manual operator.
 Solenoid only approvals with EF or EV prefix, no approvals with (no prefix) general purpose coil.
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.

Electrical Information
IMPORTANT: Supervisory and leakage current above the drop out current listed will cause improper operation. Consult your local ASCO sales office for additional assistance.

Min. Drop Coil Resistance

Voltage Pull In Out @68˚F (20˚C)
Description Wattage (DC) (mA) (mA) (ohms)
12V 34 3.63 255
24V 17 1.80 1025
Standard Ambient Version .55W
48V 8.5 0.91 4080
125V  3.2 0.34 27,400
12V 37 3.97 206
24V 19 1.98 830
High Ambient Version .70W
48V 9.7 1.03 3185
125V  3.7 0.39 21150
12V 41 4.41 165 
Surge Suppression Version 24V 19 1.98 830 
(Available only in .75W
Explosionproof version) 48V 9.7 1.03 3185 
125V  3.7 0.39 21150 
Note:  Not for battery applications.  Surge suppression contains diode bridge.

How to choose the right product

• I/O modules with leakage/supervisory current that is higher than listed on table above will need to use the 1.4W low power products (Rev G)
• Modules with leakage/supervisory current above 7mA such as the P&F KFD2-SL2-Ex2 or DeltaV SIS DO card will need to use ASCO’s standard product offering

5
 2/2•3/2•4/2
5/2•5/3
SERIES
Low
Power
4
Dimensions: inches (mm)

Const. Ref. 1 Const. Ref. 2

3.04 [77] 3.04 [77]

1.95 [50] 1.95 [50]

2.04 [52] 2.04 [52]

1/2 NPT

1/2 NPT

3.61 [92]

3.08 [78]
2.98 [76]

1.84 [47] 1.94 [49]

3.34 [85]

INLET
3/8 ANPT
ANPT OUTLET
2 PLACES 3/8 ANPT

2.44 [62] .75 [19] .94 [24]

.34 [9]
.87 [22]
INLET 1.25 [32]
3/8 ANPT

.87 [22]

M5 THREAD
7.6 [.30] MIN.FULL THREAD DEPTH
2 HOLES FOR MOUNTING

Const. Ref. 3 Const. Ref. 4, 5

2.04 [52]
1.95 [50]

3.04 [77]
1.95 [50]
1/8 NPT
.45 [11]
2.04 [52]
1/2 NPT

1/2 NPT

3.33 [85]
3.35 [85]

3.71 [94]
2.19 [56] 4.52 [115]
1.84 [47]

ANPT
3 PLACES
OUTLET
1/2 ANPT
1.56 [40]

.34 [9]
.87 [22]
1.12 [28] INLET
1/2 ANPT

3.03 [77]

.87 [22]
3.28 [83] M5 THREAD
7.6 [.30] MIN.FULL THREAD DEPTH
2 HOLES FOR MOUNTING

6
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Ref. 6
MAINLINE PRESSURE vs. PILOT LINE PRESSURE
S
3.06 WHEN SELECTION GASKET IS IN EXTERNAL POSITION
[78] 1.95
2.06 [50]
[52] 120
106

PILOT LINE PRESSURE (psi)

1/2 NPT 90
75
60
45
P
30
H F K
15
0
A
0 15 30 45 60 75 90 105 120 135 150
MAINLINE PRESSURE (psi)

Catalog
N M Number A B C F H K L M N P R S W
L
W in .84 4.68 2.08 5.41 5.01 2.73 2.06 1.06 1.28 4.23 4.06 3.83 3.26
8316H301, 302
mm 21 119 53 137 127 69 52 27 33 107 103 97 83
B
in 1.19 4.88 2.18 5.90 5.40 2.98 2.72 1.24 1.32 4.48 4.26 4.03 3.59
R 8316H303, 304
mm 30 124 56 150 167 76 69 31 34 114 108 102 91
C
Ø28 [7]
(4 Places) in 1.00 4.71 2.11 5.57 5.17 2.73 2.06 1.08 1.28 4.24 4.09 3.86 3.28
8316H381, 382
mm 25 120 54 141 131 69 52 27 33 108 104 98 83
in 1.11 4.88 2.18 5.98 5.48 2.84 2.72 1.24 1.37 4.34 4.26 4.04 3.59
8316H384
mm 28 124 55 152 139 72 69 31 35 110 108 102 91

Const. Ref. 7, 8 Const. Ref. 9. 10

3.04 [77] 1.95 [50]

2.04 [52] 1.95 [50]
2.04 [52] .45 [11]

1/8 NPT 1/8 NPT .45 [11]

1/2 NPT

1/2 NPT

3.08 [78]
P
F 3.59 [91]
1.58 [40]

H K
EXH

2 1 .16 [4]
1/4 ANPT
3 PLACES
2.05 [52]
E 2.00 [51]

A .50 [13]
.75 [19]
PRESS "P" .25 [6] .20 [5] , 2 PLACES
P

4.44 [113] M 3/4 ANPT

3 PLACES
L 1.50 [38]

B N OPTIONAL MOUNTING
EXH
"E" BRACKET WITH .56 [14]
Ø.28 [Ø7] HOLES .75 [19]
(4 PLACES) AVAILABLE
ON 3/4 SIZE ONLY

1.66 [42]
P
Const.
Ref. A B C H K L M N P R W
in 1.61 1.41 1.66 6.78 3.68 3.38 2.16 .53 5.09 .50 3.31
7
mm 41 36 42 172 93 86 55 13 129 13 84
CYL in - 1.78 - 7.40 3.93 4.44 2.81 .87 5.34 1.74 5.31
"A" 8
C R
mm - 45 - 188 100 113 71 22 136 44 135
3.82 [97]

7
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Catalog Number A B C D E F G H J K L M N P Q
in 1.88 1.03 2.15 0.72 2.41 3.21 3.13 1.41 1.36 0.72 4.71 4.65 3.70 2.19 2.22
8344H370
mm 48 26 55 18 61 82 80 36 35 18 120 118 94 56 57
in 2.62 1.50 2.66 1.06 3.12 3.88 3.18 1.86 1.75 0.83 6.06 4.63 3.51 2.01 2.81
8344H372, 374
mm 67 38 68 27 79 99 81 47 45 21 154 118 89 51 71
in 3.89 2.10 3.53 1.48 3.79 4.69 4.56 2.12 2.49 1.52 8.22 5.41 3.86 2.36 3.38
8344H376, 378
mm 99 53 90 38 96 119 116 54 63 39 209 137 98 60 86

Const. Ref. 11, 13, 15

A 1.95
C [50]
D B
Ø.34 [Ø8.6]
2 HOLES FOR ANPT
MOUNTING 3 PLACES

N
M
G Q
2.06 P
E
F [52]
3.05
[78]
q OF PIPE
P E CONNECTION

K 1/2 ANPT
H

J
L

Catalog Number A B C D E F G H J K L M N P Q R
in 1.88 2.16 1.03 0.75 2.41 1.69 4.91 2.61 1.41 0.72 1.36 3.92 3.13 2.60 4.70 2.02
8344H344
mm 48 55 26 19 61 43 125 66 36 18 35 100 80 51 119 51
in 3.88 3.53 2.09 1.47 3.81 2.12 8.25 4.34 2.12 1.55 2.51 4.60 4.56 3.07 5.71 2.38
8344H354, 356
mm 99 90 53 37 97 54 210 110 54 39 64 125 116 80 145 60
in 2.62 2.66 1.50 1.06 3.12 1.56 6.06 3.09 1.86 0.83 1.75 4.31 3.18 2.74 4.89 2.11
8344H380, 382
mm 67 68 38 27 79 40 154 78 47 21 45 109 81 70 124 54

Const. Ref. 12, 14, 16

A

Ø.34 [Ø8.6] D C B 1.95

2 HOLES FOR ANPT [50]
MOUNTING 3 PLACES
SOL 'A' SOL 'B'
B A

2.04
3.04
[52]
M [77] P
Q R
N E

q OF PIPE
CONNECTION
E
P 1" ANPT

K
J
L H
G

8
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Series 8551 8553
NPT 1/4 1/2
L1 5.12 (132) 6.00 (153)
L2 6.73 (171) 7.80 (198)
H2 4.38 (111) 4.77 (121) Const. Ref. 17
H1 1.10 (28) 1.58 (40)
W 1.77 (45) 2.85 (72) 3.02 [77]

2.03 [52]
Manual override option MH adds .250" (6.4),
MS option adds .468" (11.9) to each solenoid endcap.

Optional Manual Operators

Add Suffix Description
1 H2
Push and turn to lock with flat
MO
0 2
head screwdriver slot
3 1
1
Momentary push in with flat H1
MI
0 2
head screwdriver slot
1 W
1/8 NPT AUX. PRESSURE PORT
L1
MH Momentary push in by hand L2
0 2

MS 0 2
Push and turn to lock by hand

Series 8551 8553

NPT 1/4 1/2
L1 5.63 (144) 7.06 (180)
Const. Ref. 18
L2 7.20 (183) 8.86 (225)
H2 4.38 (111) 4.77 (121) 1

H1 1.10 (28) 1.58 (40) 3.02 [77]

W 1.77 (45) 2.85 (72) 2.03 [52]

Manual override option MH adds .250" (6.4),

MS option adds .468" (11.9) to each solenoid endcap.

Optional Manual Operators

Add Suffix Description H2
1
Push and turn to lock with flat
MO 5 1 3
0 2
head screwdriver slot
H1
1
Momentary push in with flat
MI
0 2
head screwdriver slot 1/8 NPT AUX. PRESSURE PORT
W L1
1
L2
MH Momentary push in by hand
0 2

MS 0 2
Push and turn to lock by hand

9
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Series 8551 (Aluminum, Brass)
NPT 1/4 Const. Ref. 19
L1 4.96 (126)
3.02 [77]
L2 6.49 (165) 2.03 [52]
H2 4.38 (111)
H1 1.57 (40)
W 1.77 (45)
Manual override option MH adds .250" (6.4),
H2
MS option adds .468" (11.9) to each solenoid endcap. 1/8 NPT

3 1
Optional Manual Operators
H1
Add Suffix Description
1
Push and turn to lock with flat
MO W
0 2
head screwdriver slot 1/8 NPT AUX. PRESSURE PORT 1/4 NPT
L1
1
Momentary push in with flat L2
MI
0 2
head screwdriver slot
1
8551 NAMUR Footprint
MH Momentary push in by hand
0 2

1.26 (32)
2 4

MS 0 2
Push and turn to lock by hand
.95 (24)

Const. Ref. 20
Series 8551 (316L SS) 8551 (5/3) 8553
3.02 [77]
NPT 1/4 1/4 1/2
2.03 [52]
L1 5.20 (132) - 7.08 (180)
L2 6.73 (171) 7.44 (189) 8.85 (225)
H2 4.38 (111) 4.38 (111) 4.77 (121) (8551) 1/4 NPT
(8553) 1/2 NPT
H1 1.57 (40) 1.57 (40) 2.08 (53)
W 1.77 (45) 1.77 (45) 2.87 (73) H2

Manual override option MH adds .250" (6.4),

5 1 3
MS option adds .468" (11.9) to each solenoid endcap.
H1

Optional Manual Operators

Add Suffix Description W
1/8 NPT AUX. PRESSURE PORT
1
L1
Push and turn to lock with flat
MO
0 2
head screwdriver slot L2

1
MI
Momentary push in with flat 8553 NAMUR Footprint 8551 NAMUR Footprint
0 2
head screwdriver slot
1
1.26 (32)

4
MH Momentary push in by hand 2

0 2 4
2
1.77 (45)

MS 0 2
Push and turn to lock by hand .95 (24)

1.57 (40)

10
 2/2•3/2•4/2
1.4 W Low Power Solenoid Valves 5/2•5/3
Aluminum, Brass, or Stainless Steel Bodies
4
SERIES
1/4" to 1" NPT Low
Power

Nominal Ambient Temp. Ranges Important

Series Body Material Normal Temperature Range High Ambient Temp. Version These solenoid valves are intended for use on clean dry air or inert
8553 Stainless Steel gas, filtered to 40 micrometres or better. The dew point of the media
-40°F to 140°F (-40°C to 60°C)
8551 Brass should be at least 10°C (18°F) below the minimum temperature to
Not Available
8553 -13°F to 140°F (-25°C to 60°C) which any portion of the clean air/inert gas system could be exposed
Aluminum
8551 5°F to 140°F (-15°C to 60°C) to prevent freezing. If lubricated air is used, the lubricants must be
8551 Stainless Steel -4°F to 140°F (-20°C to 60°C) compatible with Nitrile elastomers. Diester oils may cause operational
8262 problems. Instrument air in compliance with ANSI/ISA Standard
8314 -40°F to 140°F (-40°C to 60°C) 7.0.01-1996 exceeds the above requirements and is, therefore, an
8317 Brass / Stainless Steel Low Limit is the same as Normal
Temperature Ratings, but High acceptable media for these valves.
8316* -20°F to 140°F (-29°C to 60°C) Limit is 176°F (80°C)
8223
8344 -4°F to 140°F (-20°C to 60°C)
Brass only
8316G334

*Does not include 8316G334; Includes 8316H374. Note: 8553 not available in brass

Specifications (English units)

Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Brass Body Stainless Steel Body
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
2/2 VALVES, NORMALLY CLOSED, with NBR Disc
1/4 1/16 .08 0 150 140 8262G320 18 8262G386
18
3/8 5/16 1.5 10 150 140 8223G323 19 - -
1/2 3/8 3.2 25 150 140 8223G303 20 8223G310
20
3/2 VALVES, UNIVERSAL OPERATION (Normally Closed or Normally Open) with NBR Disc – SIL 3 Capable, Certified by Exida  
1/4 1/16 .08 .08 0 150 140 8314G300 1 8314G301
2
3/2 VALVES, NORMALLY CLOSED (Closed when de-energized) with NBR Disc or FPM, as Listed – SIL 3 Capable, Certified by Exida 
1/4 5/16 1.5 1.5  150 140 8316G301  3 EV8316G381
3
3/8 5/16 1.8 1.8  150 140 8316G302  3 EV8316G382
3
3/8 5/8 4 4  150 140 8316G303  3A - -
1/2 5/8 4 4  150 140 8316G304  3A EV8316G384
3A
3/4 11/16 5.5 5.5 10 150 140 8316H374  4 - -
1 1 13 13 10 150 8316G334 
140 5 - -
3/2 VALVES, UNIVERSAL (Normally Closed or Normally Open) "Quick Exhaust" with CR Diaphragm and NBR Disc
1/4  .08 .73 5 150 140 8317G307 6 8317G308
7
4/2 VALVES, with NBR Disc and Seals
1/4 1/16 .08 .08 10 150 140 8345G301  6 EV8345G381 
8
4/2 VALVES, Brass Body with NBR Disc
Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Single Solenoid Dual Solenoid
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
1/4 1/4 .80 1 10 150 140 8344G370  9 8344G344  12
3/8 3/8 1.4 2.2 10 150 140 8344G372  11 8344G380  10
1/2 3/8 1.4 2.2 10 150 140 8344G374  11 8344G382  10
3/4 3/4 5.2 5.6 10 150 140 8344G376  13 8344G354  14
1 3/4 5.2 5.6 10 150 140 8344G378  13 8344G356  14

Note: Pilot core discs are low-temperature NBR. Adding Suffix V (FKM) does NOT change the pilot core discs material. Suffix V (FKM) is not available on Series 8551 and 8553.
There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
 For "Quick Exhaust" valves, pressure port is 1/16", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
 Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when selection gasket
is in the internal position.

Can be used for dry natural gas service (no agency approvals) with the EF or EV prefix.
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.
 SIL 3 Capable, Certified by Exida, only valid when used as Normally Closed.

11
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Specifications (English units)

Single Solenoid Dual Solenoid
Operating Pressure Operating Pressure
Differential (psi) Differential (psi)
Pipe Orifice Cv Max. Max.
Air-Inert Gas Air-Inert Gas
Body Size Size Flow Fluid Catalog Const. Fluid Catalog Const.
Material (in) (in) Factor Min. Max. Temp.˚F Number Ref. Min. Max. Temp.˚F Number Ref.
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals
Aluminum 3/2 8551G305  21 8551G306  21
Aluminum 5/2 8551G317  22 8551G318  22
Aluminum 5/3 Center Closed - 22 8551G367  22
Aluminum 5/3 Center Open - 22 8551G368  22
1/4 1/4 .86
Brass 3/2 EF8551G307  21 EF8551G308  21
Brass 5/2 EF8551G319  22 EF8551G320  22
30 150 140 30 150 140
316L Stainless Steel 3/2 EV8551G313 
 21 EV8551G314 
 21
316L Stainless Steel 5/2 EV8551G321 
22 EV8551G322 
22
Aluminum 3/2 8553G305  21 8553G306  21
Aluminum 5/2 8553G317  22 8553G318  22
1/2 1/2 3.7
316L Stainless Steel 3/2 EV8553G313 
 21 EV8553G314 
 21
316L Stainless Steel 5/2 EV8553G321 
 22 EV8553G322 
 22
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals, NAMUR Mount
Aluminum 3/2, 5/2 8551G301 23 8551G302 23
Aluminum 5/3 Center Closed - - 8551G365  24
Aluminum 5/3 Center Open 1/4 1/4 .86 - - 8551G366  24
Brass 3/2, 5/2 30 150 140 EF8551G303   23 30 150 140 EF8551G304   23
316L Stainless Steel 3/2, 5/2 EV8551G309 
24 EV8551G310 
24
Aluminum 3/2, 5/2 8553G301  24 8553G302  24
1/2 1/2 3.7
316L Stainless Steel 3/2, 5/2 EV8553G309 
 24 EV8553G310 
 24
1/8" NPT exhaust for 1/4" aluminum and brass.  Brass construction supplied standard with EF solenoid.
 Brass construction supplied standard with EF solenoid.  Stainless steel construction supplied standard with EV solenoid.

Can be used for dry natural gas service (no agency approvals) with the EF or EV prefix.  Solenoid only approvals with EF of EV prefix, no approvals with general purpose coil (no prefix).

Electrical Information
IMPORTANT: Supervisory and leakage current above the drop out current listed will cause improper operation. Consult your local ASCO sales office for additional assistance.

Min. 3-Way 2-Way Coil resistance

Voltage Pull In Drop Out Drop Out @ 68˚F (20˚C)
Description Wattage (DC) (mA) (mA) (mA) (ohms)
12V 83.5 13.9 3.2 102
24V 42.0 7.0 1.6 410
Standard Ambient Version 1.4 W
48V 21.4 3.6 0.8 1640
120V 8.7 1.4 0.3 10000
12V 94.3 15.7 3.6 80
High Ambient Version 1.8 W 24V 47.9 8.0 1.8 320
48V 24.0 4.0 0.9 1260
12V 94.3 15.7 3.6 80
Surge Suppersion Version 1.7 W 24V 47.9 8.0 1.8 320
48V 22.7 3.8 0.9 1470
12V 105.3 17.6 4.0 64
Surge Suppession
2.0 W 24V 54.1 9.0 2.1 270
High Ambient Version
48V 24.0 4.0 0.9 1260

12
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Ref. 1, 2

13
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Ref. 3

MAINLINE PRESSURE vs. PILOT LINE PRESSURE

WHEN SELECTION GASKET IS IN EXTERNAL POSITION

120
106
PILOT LINE PRESSURE (psi)

90
75
60
45
30
15
0
0 15 30 45 60 75 90 105 120 135 150
MAINLINE PRESSURE (psi)

Const. Ref. 3A

14
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const.
Ref. A B C H K L M N P R W
in 1.61 1.41 1.66 6.78 3.68 3.38 2.16 .53 5.09 .50 3.31
4
mm 41 36 42 172 93 86 55 13 129 13 84
in - 1.78 - 7.40 3.93 4.44 2.81 .87 5.34 1.74 5.31
5
mm - 45 - 188 100 113 71 22 136 44 135

Const. Ref. 4, 5

1/8 NPT
.45 [11]

OPTIONAL MOUNTING
1/2 NPT BRACKET WITH
Ø .28 [7] HOLES
(4 PLACES) AVAILABLE
ON 3/4 SIZE ONLY

P
EXH “E”
H K
3.82 [97]

W N R

B CYL
“A” C

PRESS “P” 3/4 NPT 1.66 [42]

M 3 PLACES
L

Const. Ref. 6. 7

15
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Ref. 8

Const. Ref. 18

16
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Exhaust
Ref. Dia “D” E F G H J K L N P W X Y Z Pipe Size
in Ø .28 .56 2.41 1.88 4.67 1.03 2.30 3.12 .72 3.72 4.75 1.41 1.56 .81
9 3/8
mm 7 14 61 48 119 26 58 79 18 95 121 36 40 21
in Ø .34 .76 3.12 2.62 4.89 1.50 2.11 3.18 .83 3.77 6.06 1.86 1.89 .83
10 1/2
mm 9 16 79 67 118 38 70 81 21 90 154 48 49 21
in Ø .34 .76 3.12 2.62 4.65 1.50 2.11 3.18 .83 3.53 6.06 1.86 1.89 .83
11 1/2
mm 9 35 97 99 138 53 54 116 40 99 210 54 67 30
in Ø .28 .56 2.41 1.88 5.06 1.03 2.71 3.12 .72 4.12 4.81 1.41 1.56 .81
12 3/8
mm 7 14 61 48 129 26 69 79 18 105 122 36 40 21
in Ø .34 .78 3.12 2.62 5.27 1.50 2.49 3.19 .84 4.16 6.06 1.88 1.91 .84
13 1
mm 9 16 79 67 134 38 63 81 21 106 154 48 49 21
in Ø .34 1.38 3.81 3.88 6.09 2.09 3.18 4.56 1.56 4.59 8.25 2.12 2.62 1.16
14 1
mm 9 35 97 99 155 53 81 116 40 117 210 54 67 30

Const. Ref. 9, 10, 11, 12, 13, 14

1/8 NPT
.45 [11]
1/2 NPT
1/2 NPT

H
P P
K H
K

PRESS EXH PRESS EXH

N X E
2 MOUNTING HOLES
PRESS DIA “D”
EXH

J
CYL CYL
“B” Z G “A”
Y
W

BOTTOM VIEW OF VALVE

17
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Const. Ref. 19

Const. Ref. 20

18
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Series 8551 8553
NPT 1/4 1/2 Const. Ref. 21
L1 5.12 (132) 6.00 (153)
3.02 [77]
L2 6.73 (171) 7.80 (198)
2.03 [52]
H2 4.38 (111) 4.77 (121)
H1 1.10 (28) 1.58 (40)
W 1.77 (45) 2.85 (72)
Manual override option MH adds .250" (6.4),
MS option adds .468" (11.9) to each solenoid endcap. H2

Optional Manual Operators 3 1

H1
Add Suffix Description
1
Push and turn to lock with flat
MO 1/8 NPT AUX. PRESSURE PORT

0 2
head screwdriver slot W L1
L2
1
Momentary push in with flat head
MI
0 2
screwdriver slot
1

MH Momentary push in by hand

0 2

MS 0 2
Push and turn to lock by hand

Series 8551 8553

Const. Ref. 22 1

NPT 1/4 1/2

L1 5.63 (144) 7.06 (180) 3.02 [77]

L2 7.20 (183) 8.86 (225) 2.03 [52]

H2 4.38 (111) 4.77 (121)

H1 1.10 (28) 1.58 (40)
W 1.77 (45) 2.85 (72)
Manual override option MH adds .250" (6.4), H2

MS option adds .468" (11.9) to each solenoid endcap.

5 1 3

Optional Manual Operators H1

Add Suffix Description

1 1/8 NPT AUX. PRESSURE PORT
Push and turn to lock with flat W L1
MO
0 2
head screwdriver slot L2

1
Momentary push in with flat head
MI
0 2
screwdriver slot
1

MH Momentary push in by hand

0 2

MS 0 2
Push and turn to lock by hand

19
 2/2•3/2•4/2
5/2•5/3

4
SERIES
Low
Power

Dimensions: inches (mm)

Series 8551 (Aluminum, Brass)
Const. Ref. 23
NPT 1/4
L1 4.96 (126) 3.02 [77]

L2 6.49 (165) 2.03 [52]

H2 4.38 (111)
H1 1.57 (40)
W 1.77 (45)
Manual override option MH adds .250" (6.4), H2 1/8 NPT

MS option adds .468" (11.9) to each solenoid endcap.

3 1

Optional Manual Operators H1

Add Suffix Description

1
Push and turn to lock with flat W
MO 1/8 NPT AUX. PRESSURE PORT 1/4 NPT

0 2
head screwdriver slot L1

1 L2
Momentary push in with flat
MI
0 2
head screwdriver slot 8551 NAMUR Footprint
1

MH Momentary push in by hand

1.26 (32)
0 2 2 4

MS 0 2
Push and turn to lock by hand
.95 (24)

Const. Ref. 24
Series 8551 (316L SS) 8551 (5/3) 8553 3.02 [77]
NPT 1/4 1/4 1/2 2.03 [52]
L1 5.20 (132) - 7.08 (180)
L2 6.73 (171) 7.44 (189) 8.85 (225)
H2 4.38 (111) 4.38 (111) 4.77 (121) (8551) 1/4 NPT
(8553) 1/2 NPT

H1 1.57 (40) 1.57 (40) 2.08 (53)

H2
W 1.77 (45) 1.77 (45) 2.87 (73)
Manual override option MH adds .250" (6.4), 5 1 3
MS option adds .468" (11.9) to each solenoid endcap. H1

Optional Manual Operators

W
Add Suffix Description 1/8 NPT AUX. PRESSURE PORT

1 L1
Push and turn to lock with flat L2
MO
0 2
head screwdriver slot
1 8553 NAMUR Footprint 8551 NAMUR Footprint
Momentary push in with flat
MI
0 2
head screwdriver slot
1
1.26 (32)

2 4

MH Momentary push in by hand 2 4

0 2
1.77 (45)

1
.95 (24)
MS 0 2
Push and turn to lock by hand

1.57 (40)

20
 2/2•3/2•4/2
Intrinsically Safe & 5/2•5/3

4 Non-Incendive Field Wiring Valves

Aluminum, Brass, or Stainless Steel Bodies
1/4" to 1" NPT
IS & NIFW
SERIES

Nominal Ambient Temp. Ranges Important

Series Body Material Normal Temperature Range These solenoid valves are intended for use on clean dry air or inert
8553 Stainless Steel gas, filtered to 40 micrometres or better. The dew point of the media
-40°F to 140°F (-40°C to 60°C) should be at least 10°C (18°F) below the minimum temperature to
8551 Brass
8553 -13°F to 140°F (-25°C to 60°C)
which any portion of the clean air/inert gas system could be exposed
Aluminum to prevent freezing. If lubricated air is used, the lubricants must be
8551 5°F to 140°F (-15°C to 60°C)
compatible with Nitrile elastomers. Diester oils may cause operational
8551 Stainless Steel
problems. Instrument air in compliance with ANSI/ISA Standard
8262
-40°F to 149°F (-40°C to 65°C) 7.0.01-1996 exceeds the above requirements and is, therefore, an
8314
acceptable media for these valves.
8317 Brass / Stainless Steel
8316* -20°F to 149°F (-29°C to 65°C)
8223
8344 -4°F to 149°F (-20°C to 65°C)
Brass only
8316H334

*Does not include JPIS8316B334; Includes JPIS8316B374. Note: 8553 not available in brass

Specifications (English units)

Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Brass Body Stainless Steel Body
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
2/2 VALVES, NORMALLY CLOSED, with NBR Disc
1/4 1/16 .06 0 130 149 JPIS8262B320 1 JPIS8262B386 1
3/8 5/16 1.5 10 130 149 JPIS8223B323 2 - -
1/2 3/8 3.2 25 130 149 JPIS8223B303 3 JPIS8223B310 3
3/2 VALVES, UNIVERSAL OPERATION (Normally Closed or Normally Open) with NBR Disc – SIL 3 Capable, Certified by Exida  
1/4 1/20 .06 .06 0 130/105
149 JPIS8314B300 4 JPIS8314B301 5
3/2 VALVES, NORMALLY CLOSED (Closed when de-energized) with NBR Disc or FKM (Suffix V), as Listed – SIL 3 Capable, Certified by Exida 
1/4 5/16 1.5 1.5  130 149 JPIS8316B301  6 JPIS8316B381 6
3/8 5/16 1.8 1.8  130 149 JPIS8316B302  6 JPIS8316B382 6
3/8 5/8 4 4  130 149 JPIS8316B303  6 - -
1/2 5/8 4 4  130 149 JPIS8316B304  6 JPIS8316B384 6
3/4 11/16 5.5 5.5 10 130 149 JPIS8316B374  7 - -
1 1 13 13 10 130 149 JPIS8316B334  8 - -
3/2 VALVES, UNIVERSAL (Normally Closed or Normally Open) "Quick Exhaust" with NBR Diaphragm and NBR Disc
1/4  .06 .73 5 130 149 JPIS8317B307 9 JPIS8317B308 10
4/2 VALVES, Brass Body with NBR Disc
Operating Pressure
Cv Flow Differential (psi)
Max.
Pipe Orifice Factor Air-Inert Gas Fluid and Single Solenoid Dual Solenoid
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (in) Cylinder Exhaust Min. Max. Temp. °F Catalog Number Ref. Catalog Number Ref.
1/4 1/4 .80 1 10 130 149 JPIS8344B370  11 JPIS8344B344  12
3/8 3/8 1.5 2.2 10 130 149 JPIS8344B372  13 JPIS8344B380  14
1/2 3/8 1.5 2.2 10 130 149 JPIS8344B374  13 JPIS8344B382  14
3/4 3/4 5.2 5.6 10 130 149 JPIS8344B376  15 JPIS8344B354  16
1 3/4 5.2 5.6 10 130 149 JPIS8344B378  15 JPIS8344B356  16

There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
 For "Quick Exhaust" valves, pressure port is 1/20", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
 Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when selection gasket
is in the internal position.

Normally closed = 130 psi. Normally open = 105 psi.
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.
 SIL 3 Capable per IEC 61508, Certified by Exida, only valid when used as Normally Closed.
 Dual solenoid 8344 requires minimum pressure of 20 psi. Single solenoid version has 10 psi minimum pressure requirement.

21
 2/2•3/2•4/2
5/2•5/3
SERIES
IS & NIFW 4
Specifications (English units)
Single Solenoid – SIL 3 Capable, Certified by Exida  Dual Solenoid
Operating Pressure Operating Pressure
Differential (psi) Differential (psi)
Pipe Orifice Cv Max. Max.
Air-Inert Gas Air-Inert Gas
Body Size Size Flow Fluid Catalog Const. Fluid Catalog Const.
Material (in) (in) Factor Min. Max. Temp.˚F Number Ref. Min. Max. Temp.˚F Number Ref.
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals
Aluminum 3/2 JPIS8551B305 17 JPIS8551B306 17
Aluminum 5/2 JPIS8551B317 18 JPIS8551B318 18
Aluminum 5/3 Center Closed - - JPIS8551B367 18
Aluminum 5/3 Center Open - - JPIS8551B368 18
1/4 1/4 .86
Brass 3/2 JPIS8551B307 17 JPIS8551B308 17
Brass 5/2 JPIS8551B319 18 JPIS8551B320 18
35 130 149 30 130 149
316L Stainless Steel 3/2 JPIS8551B313 17 JPIS8551B314 17
316L Stainless Steel 5/2 JPIS8551B321 18 JPIS8551B322 18
Aluminum 3/2 JPIS8553B305 17 JPIS8553B306 17
Aluminum 5/2 JPIS8553B317 18 JPIS8553B318 18
1/2 1/2 3.7
316L Stainless Steel 3/2 JPIS8553B313 17 JPIS8553B314 17
316L Stainless Steel 5/2 JPIS8553B321 18 JPIS8553B322 18
3/2, 5/2, 5/3 VALVES, with NBR and PUR Seals, NAMUR Mount
Aluminum 3/2, 5/2 JPIS8551B301 19 JPIS8551B302 19
Aluminum 5/3 Center Closed - - JPIS8551B365 20
Aluminum 5/3 Center Open 1/4 1/4 .86 - - JPIS8551B366 20
Brass 3/2, 5/2 35 130 149 JPIS8551B303 19 30 130 149 JPIS8551B304 19
316L Stainless Steel 3/2, 5/2 JPIS8551B309 20 JPIS8551B310 20
Aluminum 3/2, 5/2 JPIS8553B301 20 JPIS8553B302 20
1/2 1/2 3.7
316L Stainless Steel 3/2, 5/2 JPIS8553B309 20 JPIS8553B310 20
1/8" NPT exhaust for 1/4" aluminum and brass.
 Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.

22
 2/2•3/2•4/2
5/2•5/3

4 SERIES
IS & NIFW

Dimensions: inches (mm)

Const. Ref. 1

4.46 [113]
1.95 [50]

3.47 [88]

2.98 [76]

1.58 [40] 3.34 [85]

1/2 NPT

ANPT
2 PLACES

.34 [9]
.87 [22]

.87 [22]

M5 THREAD
7.6[.30] MIN.FULL THREAD DEPTH
2 HOLES FOR MOUNTING

Const. Ref. 2

4.46 [113]
1.95 [50]

3.47 [88]

3.61 [92]

3.08 [78]

1.68 [43]
1/2 NPT IN
3/8

OUTLET
3/8 ANPT

2.44 [62] .75 [19] .94 [24]

INLET 1.25 [32]

3/8 ANPT

23
 2/2•3/2•4/2
5/2•5/3
SERIES
IS & NIFW 4
Dimensions: inches (mm)

JUNCTION BOX CONDUIT

2.23 [57]

1.95 [50] 1.68 [43]

1.95 [50]

2.04 [52]

4.46 [113] 3.13 [79]

3.47 [88]

1/2 NPT
1.54 [39] 1/2 NPT 1.54 [39]

DIN MULTIPIN
1.89 [48]

1.95 [50]
1.95 [50]

3.58 [91]
3.36 [85]
2.58 [66]
2.36 [60]

.47 [12]
1.54 [39]
1.54 [39]
M12 x 1 THREAD

24
 2/2•3/2•4/2
5/2•5/3

4 SERIES
IS & NIFW

Dimensions: inches (mm)

Catalog Number A B C F H K L M N P R S W
in .84 4.68 2.08 5.41 5.01 2.47 2.60 1.06 1.28 4.23 4.06 5.16 3.26
JPIS8316B301, 302
mm 21 119 53 137 127 63 52 27 33 108 103 131 83
in 1.19 4.88 2.18 5.90 5.40 2.72 2.72 1.24 1.32 4.48 4.26 5.36 3.59
JPIS8316B303, 304
mm 30 124 56 150 137 69 69 31 34 114 108 136 91
in 1.00 4.71 1.98 5.57 5.17 2.47 2.06 1.08 1.28 4.24 4.09 5.19 3.28
JPIS8316B381, 382
mm 25 120 50 141 131 63 52 27 33 108 104 132 83
in 1.11 4.88 2.18 5.98 5.48 2.58 2.72 1.24 1.32 4.34 4.26 5.37 3.59
JPIS8316B384
mm 28 124 55 152 139 66 69 31 34 110 108 136 91

Const. Ref. 6

4.46
1.95 [113]
[50]
3.47
[88]

1/2 NPT

F H
K

L
N M

MAINLINE PRESSURE vs. PILOT LINE PRESSURE

WHEN SELECTION GASKET IS IN EXTERNAL POSITION
B
120
R
106
PILOT LINE PRESSURE (psi)

90 C

75 Ø28 [7]
(4 PLACES)
60
45
30
15
0
0 15 30 45 60 75 90 105 120 135 150
MAINLINE PRESSURE (psi)

25
 2/2•3/2•4/2
5/2•5/3
SERIES
IS & NIFW 4
Dimensions: inches (mm)

Const. Ref. 3

4.46 [113]
1.95 [50]

3.47 [88]

3.33 [85]

1/2 NPT 4.52 [115]

1.93 [49]

OUTLET
1/2 ANPT

1.12 [28] INLET

1/2 ANPT

3.03 [77]

3.28 [83]

Const. Ref. 4, 5

4.46 [113]
1.95 [50]
3.47 [88]

1/8 NPT .45 [11]

3.35 [85]

3.71 [94]

1.58 [40]
1/2 NPT
1 2

ANPT
3 PLACES

1.56 [40]

.34 [9]
.87 [22]

.87 [22]

M5 THREAD
7.6[.30] MIN.FULL THREAD DEPTH
2 HOLES FOR MOUNTING

26
 2/2•3/2•4/2
5/2•5/3

4 SERIES
IS & NIFW

Dimensions: inches (mm)

Catalog Number A B C D E F G H J K L M N P Q
in 1.88 1.03 2.15 0.72 2.41 3.21 3.13 1.41 1.36 0.72 4.71 4.65 3.70 1.93 2.22
JPIS8344B370
mm 48 26 55 18 61 82 80 36 35 18 120 118 94 49 57
in 2.62 1.50 2.66 1.06 3.12 3.88 3.18 1.86 1.75 0.83 6.06 4.63 3.51 1.75 2.81
JPIS8344B372, 374
mm 67 38 68 27 79 99 81 47 45 21 154 118 89 44 71
in 3.89 2.10 3.53 1.48 3.79 4.69 4.56 2.12 2.49 1.52 8.22 5.41 3.86 2.10 3.38
JPIS8344B376, 378
mm 99 53 90 38 96 119 116 54 63 39 209 137 98 53 86

Const. Ref. 11, 13, 15

D B C
Ø.34 [8.6]
2 HOLES FOR ANPT
MOUNTING 3 PLACES
B
A

G 3.47 Q
E
F [88]

P E

K 1/2 ANPT

1.95
[50]

1/2 ANPT

N
M
P

q OF PIPE
CONNECTION

27
 2/2•3/2•4/2
5/2•5/3
SERIES
IS & NIFW 4
Dimensions: inches (mm)

Const. Ref. 7, 8
4.46 [113] 1.95 [50]
3.47 [88] .45 [11]
1/8 NPT

1/2 NPT

H K

PRESS "P"
4.44 [113]
M 3/4 ANPT
L 3 PLACES
W OPTIONAL MOUNTING
B N BRACKET WITH
EXH
Ø.28 [Ø7] HOLES
"E"
(4 PLACES) AVAILABLE
ON 3/4 SIZE ONLY

1.66 [42]
Const.
P
Ref. A B C H K L M N P R W
in 1.61 1.41 1.66 6.78 3.31 3.38 2.16 .53 5.09 .50 3.31
7
mm 41 36 42 172 84 86 55 13 129 13 84
in 2.06 1.78 - 7.40 3.56 4.44 2.70 .87 5.34 1.74 5.31
CYL 8
"A" mm 52 45 - 188 90 113 69 22 136 44 135
C R

3.82 [97]

Const. Ref. 9. 10

4.46 [113]
1.95 [50]
3.47 [88]

1/8 NPT .45 [11]

3.08 [78]

1.32 [33] 3.59 [91]

1/2 NPT
EXH

2 1 .16 [4]

1/4 ANPT
2.05 [52] 3 PLACES
2.00 [51]

.50 [13]

.75 [19]
.25 [6]
2 .20 [5]

1.50 [38]

.56 [14] 1
.75 [19]

28
 2/2•3/2•4/2
5/2•5/3

4 IS & NIFW
SERIES

Dimensions: inches (mm)

Series 8551 8553
NPT 1/4 1/2
L1 5.12 (132) 6.00 (153)
L2 6.73 (171) 7.80 (198)
Const. Ref. 17
H2 4.38 (111) 4.77 (121)
H1 1.10 (28) 1.58 (40)
4.46 [113]
W 1.77 (45) 2.85 (72) 3.47 [88]
1.95 [50]

Manual override option MH adds .250" (6.4), 1/8 NPT

MS option adds .468" (11.9) to each solenoid endcap. 3

1/2 NPT
Optional Manual Operators
Add Suffix Description H2
1
Push and turn to lock with flat
MO
0 2
head screwdriver slot 3 1

1 H1
Momentary push in with flat
MI
0 2
head screwdriver slot
1 1/8 NPT AUX. PRESSURE PORT
W L1
MH Momentary push in by hand L2
0 2

MS 0 2
Push and turn to lock by hand

Series 8551 8553

NPT 1/4 1/2 Const. Ref. 18
L1 5.63 (144) 7.06 (180)
L2 7.20 (183) 8.86 (225)
4.46 [113]
H2 4.38 (111) 4.77 (121) 3.47 [88]
1.95 [50]

H1 1.10 (28) 1.58 (40)

1/8 NPT
W 1.77 (45) 2.85 (72) 3

Manual override option MH adds .250" (6.4),

1/2 NPT
MS option adds .468" (11.9) to each solenoid endcap.
H2
Optional Manual Operators
Add Suffix Description 5 1 3
1
Push and turn to lock with flat H1
MO
0 2
head screwdriver slot
1
Momentary push in with flat 1/8 NPT AUX. PRESSURE PORT
MI W L1
0 2
head screwdriver slot
L2
1

MH Momentary push in by hand

0 2

MS 0 2
Push and turn to lock by hand

29
 2/2•3/2•4/2
5/2•5/3
SERIES
IS & NIFW 4
Dimensions: inches (mm)
Catalog Number
A B C D E F G H J K L M N P Q R
in 1.88 2.16 1.03 0.75 2.41 1.69 4.91 2.61 1.41 0.72 1.36 5.35 3.13 2.36 4.46 2.02
JPIS8344B344
mm 48 55 26 19 61 43 125 66 36 18 35 136 80 60 113 51
in 3.88 3.53 2.09 1.47 3.81 2.12 8.25 4.34 2.12 1.55 2.51 6.03 4.56 2.83 5.47 2.38
JPIS8344B354, 356
mm 99 90 53 37 97 54 210 110 54 39 64 153 116 72 139 60
in 2.62 2.66 1.50 1.06 3.12 1.56 6.06 3.09 1.86 0.83 1.75 5.74 3.18 2.50 4.65 2.11
JPIS8344B380, 382
mm 67 68 38 27 79 40 154 78 47 21 45 146 81 64 118 54

Const. Ref. 12, 14, 16

B
A
ANPT
.34 DIA [Ø8.6] D C 3 PLACES
2 HOLES FOR
MOUNTING

3.46
B A [88]

4.46
M [113]

N E

E
P
1" ANPT
K
J

L H

1.95
[50]

SOL 'B'
SOL 'A'

P
Q R

q OF PIPE
CONNECTION

30
 2/2•3/2•4/2
5/2•5/3

4 IS & NIFW
SERIES

Dimensions inches (mm)

Series 8551 (Aluminum, Brass) Const. Ref. 19
NPT 1/4
L1 4.96 (126) 4.46 [113]
3.47 [88]
1.95 [50]

L2 6.49 (165) 1/8 NPT

H2 4.38 (111) 3

H1 1.57 (40) 1/2 NPT

W 1.77 (45)
H2
Manual override option MH adds .250" (6.4), 1/8 NPT
MS option adds .468" (11.9) to each solenoid endcap. 3 1

H1

Optional Manual Operators

Add Suffix Description
1/4 NPT
1 W 1/8 NPT AUX. PRESSURE PORT
Push and turn to lock with flat L1
MO
0 2
head screwdriver slot L2

1
Momentary push in with flat
MI
0 2
head screwdriver slot 8551 NAMUR Footprint
1

MH Momentary push in by hand

1.26 (32)
0 2 2 4

MS 0 2
Push and turn to lock by hand
.95 (24)

Const. Ref. 20
Series 8551 (316L SS) 8551 (5/3) 8553
NPT 1/4 1/4 1/2 4.46 [113]
L1 5.20 (132) - 7.08 (180) 3.47 [88]
1.95 [50]

L2 6.73 (171) 7.44 (189) 8.85 (225) 1/8 NPT

3
H2 4.38 (111) 4.38 (111) 4.77 (121)
1/2 NPT
H1 1.57 (40) 1.57 (40) 2.08 (53)
(8551) 1/4 NPT
W 1.77 (45) 1.77 (45) 2.87 (73) H2
(8553) 1/2 NPT

Manual override option MH adds .250" (6.4),

MS option adds .468" (11.9) to each solenoid endcap. 5 1 3

H1

Optional Manual Operators

Add Suffix Description W 1/8 NPT AUX. PRESSURE PORT
1
Push and turn to lock with flat L1
MO
0 2
head screwdriver slot L2

1
Momentary push in with flat
MI
0 2
head screwdriver slot
1 8553 NAMUR Footprint 8551 NAMUR Footprint
MH Momentary push in by hand
0 2
1.26 (32)

2 4

1
2 4
1.77 (45)

MS 0 2
Push and turn to lock by hand
.95 (24)

1.57 (40)

31
 3/2 Direct Acting and Pilot Operated
SERIES Harsh Environment
Harsh
Env.
High Flow • Quick Exhaust Valves
316L Stainless Steel Externals • 1/4" NPT 4
Specifications (English units)
Orifice Operating Pressure Differential (psi)
Size Cv Flow Wattage Rating/
Pipe
(in) Factor Air/Natural Gas Coil Insulation Class
Size Const.
(in) Pressure Exhaust Pressure Exhaust Min. Max. Catalog Number Ref. 12 or 24 VDC
NORMALLY CLOSED (Closed when de-energized)
1/4 1/16 3/32 0.08 0.16 0 150  EF8320A511 1 1.3/F
1/4 3/64 5/64 0.05 0.11 0 125
EF8320A512 1 0.55/F
1/4 1/16 1/4 0.08 1.4 20 150 EF8317A511  2 1.3/F
1/4 5/16 5/16 1.10 1.40 20 150 EF8321A511 3 1.3/F
1/4 5/16 5/16 1.10 1.40 20 125 EF8321A512 3 0.55/F
UNIVERSAL FLOW (Pressure at any port)
1/4 1/16 3/32 0.08 .16 0 65 EF8320A515 1 1.3/F
Main disc is NBR  This valve has a Hytrel diaphragm.  Light Oil @ 300 SSU Max. Pressure 125 psi (8.6 bar).
Light Oil @ 300 SSU Max. Pressure 90 psi (6 bar).

Electrical Information
Standard Coil Watt Rating
and Class and Power Consumption
of Insulation DC Watts
F 0.55
F 1.3
Standard Voltages: 12 and 24 volts DC.

*IMPORTANT: Supervisory and leakage current above the drop out current listed will cause improper operation.
Consult your local ASCO sales office for additional assistance.
Min. Drop Coil Resistance
Wattage Voltage Pull In Out @ 68˚F (20˚C)
(DC) (DC) (mA) (mA)* (ohms)
12V DC 81.4 11.3 111
1.3W
24V DC 41.0 6.6 443
12V DC 35.8 3.4 262
0.55W
24V DC 17.9 1.7 1047

32
 3/2
SERIES

4 Harsh
Env.

Dimensions: inches (mm)

Const. Ref. 1 Const. Ref. 2 (Quick Exhaust)

33 [1-5/16]
A.F.HEX

33 [1-5/16]
A.F.HEX

4.73
[120]

5.8
4.73 [147]
[120] 6.72
[171]
5.75
[146]

P E
1/4" ANPT
E 4 PLACES
P E C
C
E

1/4" ANPT
3 PLACES

E E

2.05
Ø1.82 [52]
[Ø46]

2.11
[54]

2.05
[52]

Const. Ref. 3 (High Flow)

33 [1-5/16]
A.F.HEX

4.73
[120]
6.63
[168]
5.87
6.96 [149]
[177]

7.69
[195] E

C P
1/4" ANPT
4 PLACES
E C

Ø2
[Ø51]

2.11
[53]

33
 Direct Acting
2/2
Magnetic Latching Valves
4
SERIES
Brass or Stainless Steel Bodies
Maglatch 1/8" to 3’8" NPT

2-Way Specifications (English units)

Operating Pressure Differential (psi)
Pipe Orifice Cv Max. DC Catalog Number Watt Rating/
Size Size Flow Max. Fluid Const. Class of Coil
(in) (in) Factor Min. Air-Inert Gas Water Lt.Oil Temp. ˚F Brass Stainless Steel Ref. Insulation
1/8 3/64 0.06 0 2025 1710 825 140 - MU8262A619 1 33.2
1/8 3/64 0.06 0 1500 1350 825 140 MU8262A610 - 1 33.2
1/8 3/32 0.21 0 500 350 325 140 MU8262A611 MU8262A620 1 33.2
1/8 1/8 0.35 0 275 260 195 140 MU8262A612 MU8262A621 1 33.2
1/4 3/64 0.06 0 1500 1350 825 140 MU8262A613 MU8262A622 2 33.2
1/4 3/32 0.21 0 500 350 270 140 MU8262A614 MU8262A623 2 33.2
1/4 1/8 0.35 0 275 260 150 140 MU8262A615 MU8262A624 2 33.2
1/4 5/32 0.52 0 150 140 100 140 MU8262A616 MU8262A625 2 33.2
1/4 7/32 0.73 0 55 54 40 140 MU8262A617 MU8262A626 2 33.2
1/4 9/32 0.88 0 36 36 33 140 MU8262A618 MU8262A627 2 33.2
3/8 1/8 0.35 0 275 260 140 140 MU8263A615 MU8263A624 3 33.2
3/8 5/32 0.52 0 150 140 80 140 MU8263A616 MU8263A625 3 33.2
3/8 7/32 0.73 0 55 54 29 140 MU8263A617 MU8263A626 3 33.2
3/8 9/32 0.88 0 35 32 21 140 MU8263A618 MU8263A627 3 33.2

Electrical Information
Watt Rating and
Standard Coil Power Consumption Spare Coil Part No.
and Class of DC General Purpose
Insulation Watts DC
A 33.2 230725
Standard Voltages: 6, 12, 24 VDC. Must be specified when ordering.
Other voltages available when required.

Dimensions: inches (mm)

Const. Const. Ref. 1, 2, 3
Ref. H K L P W
in 2.80 1.94 1.19 2.50 1.71 W
1
mm 71 49 30 63 43
in 2.94 2.08 1.56 2.58 1.90
2
mm 75 53 40 66 48
in 3.01 2.15 1.88 2.58 2.06
3
mm 76 55 48 66 52
P
H

NPT PIPE THREAD

2 PLACES

Const. Ref. 1 (1/8" Pipe) Const. Ref. 2 (1/4" Pipe) Const. Ref. 3 (3/8" Pipe)
.30 .59 .34 .87 .57 .75
[8] [15] [9] [22.2] [14] [19]
MOUNTING MOUNTING MOUNTING
HOLES HOLES HOLES

A A A A A A

M5 THREAD M5 THREAD M5 THREAD

.69 [17.5] .87 [22.2] .81 [20.6]
.25 [6.4] MIN. FULL .30 [7.6] MIN. FULL .24 [6] MIN. FULL
MOUNTING MOUNTING MOUNTING
THREAD DEPTH THREAD DEPTH THREAD DEPTH
HOLES HOLES HOLES
2 HOLES 2 HOLES 2 HOLES
FOR MOUNTING FOR MOUNTING FOR MOUNTING
FLOW FLOW FLOW

Note: Mounting holes will accept a standard #10-32 machine screw.

34
 Direct Acting
3/2
Magnetic Latching Valves
4
SERIES
Stainless Steel Bodies
1/4" NPT Maglatch

3-Way Specifications (English units)

Operating Pressure
Pipe Orifice Cv Differential (psi) Watt Rating/
Size Size Flow Max.Fluid Const. Class of Coil
(in) (in) Factor Min. Max Temp. °F Catalog Number Voltage Ref. Insulation
1/4 0.06 0.09 0 125 120 EFHVL283693001 12/DC 1 14.2/F
1/4 0.06 0.09 0 125 120 HV296875001 12/DC 1 14.2/F
1/4 0.08 0.20 0 125 120 HV426631001 24/DC 1 14.2/F
1/4 0.08 0.20 0 125 120 HV428342001 12/DC 1 14.2/F
1/4 0.08 0.20 0 125 120 HV428342002 24/DC 1 14.2/F

Electrical Information
Watt Rating
Standard Coil and Power Spare Coil Spare Coil
and Class Consumption Part Number Part Number
of Insulation Watts 24/DC 12/DC
F 14.2 278543-004-K* 278543-002-K*
Standard Voltages: 12 & 24 VDC. Must be specified when ordering.

Dimensions: inches (mm)

Const. Ref. 1
3.13
[80] 1/2"
1.95
2.14 ANPT
[50]
[54]

3.72
[95]

2.73
[69]

1.75
[45]

1/4" ANPT
3 PLACES

1.44
[37]

Flow Diagrams

Un-Latched Latched

Press. 3 Cyl. Press. 3 Cyl.

2 1 2 1

Exh.
Exh.

35
 2/2•3/2•4/2
Electronically Enhanced Solenoid Valves
SERIES

4
Brass and Stainless Steel Bodies
Next
Generation 1/8" - 2" NPT

Electrical Specifications The advanced technology used in the Next Generation coil includes electronic
circuitry which may limit the compatibility with certain control system compo-
2 Watt Electronic Coils Type
nents. The following issues need to be considered when specifying an output
Maximum Ambient Temperature 140˚F
card or device to operate the Next Generation coil. An initial inrush current spike
Maximum Cycle Rate 1 Operation/ Second is drawn by the Next Generation coil. This inrush spike is 72 msec in duration,
Standard Coil Class of Insulation H which is sufficient time for the core to reach the plugnut. The electrical require-
ment then drops to the holding value.
Power Consumption
The Next Generation solenoid nominal power rating is 2 watts. Depending Inrush Current: The power source, wiring, and output device used need to
on the input voltage applied, the actual power rating may vary. Please use have surge ratings equal to or greater than the inrush current value (appro-
the charts below to determine your actual power rating. priate to the voltage range) specified in the table below.
Inrush Current Rating
Version Coil Version Peak Inrush Current (Amps)
100-240/50-60Hz 12-24/DC 3.2
24-120/50-60Hz/DC 1.4
100-240/50-60Hz/DC 0.32
2.0
1.9
Maximum Duration = 72 ms
1.8
Watts

1.7
1.6
Holding Current: The power source, wiring, and output device used need
1.5 to have continuous current ratings equal to or greater than the holding current
1.4 value (appropriate to the voltage range) specified in the table below.
100 170 240

Voltage Input Holding Current Rating

Input Average Holding Average Holding
Coil Version Voltage Current (Amps) Volt-Amps (VA)
Version 12 0.340 4.0
12-24/DC
24-120/50-60Hz 24 0.250 6.0
24 0.170 4.0
24-120/50-60Hz/DC
120 0.100 10.0
2.0 100 0.040 4.0
1.9 100-240/50-60Hz/DC
1.8
240 0.032 7.5
Watts

1.7
1.6
1.5 Leakage Currents: The leakage current is defined as a current that is
1.4 supplied from an output device when the device is in its off or de-activated
24 62 120
state. of Next Generation coil in a system that utilizes supervisory currents is
Voltage Input not recommended.
Maximum Leakage Current 3 mA

Version
12-24/DC Coil Operating Voltage Ranges
All coils are designed for industrial operating voltages and can be used on the
following voltage ranges:
2.0
1.9 Voltage Range Minimum Voltage Maximum Voltage
1.8
100-240V/50 or 60Hz/DC 85 264
Watts

1.7
1.6 24-120V/50 or 60Hz/DC 20.4 132
1.5 12-24/DC only 10.4 26.4
1.4
12 18 24
The coils with voltage ranges of 100-240 and 24-120 have three lead wires,
Voltage Input 24 inches long (2 red for power input, and one green lead for grounding
where necessary). These two versions are not polarity sensitive.
The coil with a voltage range of 12-24/DC has 3 lead wires, one red, one black,
and one green. This coil is polarity sensitive. The red lead is the positive, black
is the negative, and green is the ground wire. This solenoid is also polarity
protected. Reversing the polarity will not damage the coil, but the coil will not
function until the correct polarity is applied.
Note: The 100-240 and 24-120 voltage range is also suitable for battery
charging circuits designed around a 125/DC nominal voltage range.
36
 2/2•3/2•4/2
SERIES

4 Next
Generation

2-Way Features
• Two-way (2/2) Next Generation solenoid valves have one inlet port and one outlet port
• Control of air, water, light oil, and non-corrosive media
• Normally closed (opens when energized) and normally open (closed when energized) operation
• Pipe sizes – 1/8 to 2 inch

2-Way Specifications (English units)

Operating Pressure Differential (psi)
Max. AC/DC Agency Agency
Pipe Orifice Max
Size Dia. Cv Air-Inert Light Oil Fluid Const. Const Wattage
(in) (in) Flow Min. Gas Water  @ 300 SSU Temp.˚F Brass Ref. UL Stainless Steel Ref. UL AC/DC
General Service - Normally Closed
1/8 3/64 0.06 0 2200 2200 1700 140 - - - 8262R175  1  2
1/8 3/64 0.06 0 1500 1500 1500 140 8262R099  1  - - - 2
1/8 3/32 0.21 0 720 410 410 180 8262R277 1  8262R178 1  2
1/8 1/8 0.35 0 540 395 360 180 8262R105 1  8262R174 1  2
1/8 1/8 0.35 0 200 - - 167 8262R077
1  - - - 2
1/4 3/64 0.06 0 1500 1500 1500 140 8262R107  2  - - - 2
1/4 3/64 0.06 0 2200 2200 1700 140 - - - 8262R181  2  2
1/4 3/32 0.21 0 720 410 410 180 8262R109 2  8262R183 2  2
1/4 1/8 0.35 0 540 395 360 180 8262R232 2  8262R185 2  2
1/4 5/32 0.52 0 300 225 225 180 8262R202 2  8262R220 2  2
1/4 7/32 0.73 0 125 125 125 180 8262R208 2  8262R226 2  2
1/4 9/32 0.88 0 105 105 105 180 8262R212 2  8262R230 2  2
1/4 9/32 1.0 0 50 - - 167 8262R078
2  - - - 2
1/4 5/16 1.5 10 1500 1500 1500 180 8223P025 18 - - - - 2
3/8 1/8 0.35 0 540 395 360 180 8263R115 3  8263R191 3  2
3/8 5/32 0.52 0 300 225 225 180 8263R200 3  8263R193 3  2
3/8 7/32 0.73 0 125 125 125 180 8263R124 3  8263R332 3  2
3/8 9/32 0.88 0 105 85 85 180 8263R210 3  8263R333 3  2
3/8 5/16 1.5 10 1500 1500 1500 180 8223P027 18 - - - - 2
3/8 5/8 3 0 150 150 - 180 8210P093 4  - - - 2
3/8 5/8 3 5 300 300 300 180 8210P006 4  - - - 2
1/2 3/8 3.2 25 1500 1500 1500 180 8223P003 5 - 8223P010 6 - 2
1/2 5/8 4 0 150 150 - 180 8210P094 4  - - - 2
1/2 5/8 4 0 150 150 125 180 - - - 8210P087 7  2
1/2 5/8 4 5 300 300 300 180 8210P007 4  - - - 2
3/4 5/8 4.5 0 150 150 125 180 - - - 8210P088 7  2
3/4 3/4 5 0 150 150 - 180 8210P095 7  - - - 2
3/4 3/4 5 0 3 3 - 180 8030P003 8  - - - 2
3/4 3/4 7.8 25 750 750 750 180 8223P005 9 - - - - 2
1 1 13 5 150 150 100 180 8210P004 10  - - - 2
1 1/4 1 1/8 15 5 150 150 100 180 8210P008 10  - - - 2
1 1/2 1 1/4 22.5 5 150 150 100 180 8210P022 11  - - - 2
2 1 3/4 43 5 150 125 90 180 8210P100 12  - - - 2
General Service - Normally Open
1/8 3/64 0.06 0 1150 900 800 140 8262R155  1  8262R168  1  2
1/8 3/64 0.06 0 750 750 750 180 8262R156 1  8262R169 1  2
1/8 3/32 0.21 0 275 230 180 180 8262R128 1  8262R236 1  2
1/8 1/8 0.35 0 160 145 125 180 8262R129 1  8262R237 1  2
1/4 3/64 0.06 0 1150 900 800 140 8262R161  2  8262R199  2  2
1/4 3/64 0.06 0 750 750 750 180 8262R260 2  8262R130 2  2
1/4 3/32 0.21 0 275 230 180 180 8262R261 2  8262R134 2  2
1/4 1/8 0.35 0 160 145 125 180 8262R262 2  8262R138 2  2
1/4 5/32 0.54 0 90 90 70 180 8262R263 2  8262R142 2  2
1/4 7/32 0.83 0 45 45 40 180 8262R264 2  8262R148 2  2
1/4 9/32 0.96 0 30 30 30 180 8262R265 2  8262R152 2  2
3/8 1/8 0.35 0 160 145 125 180 8263R070 3  8263R080 3  2
3/8 5/32 0.54 0 90 90 70 180 8263R071 3  8263R081 3  2
3/8 7/32 0.83 0 45 45 40 180 8263R072 3  8263R082 3  2
3/8 9/32 0.96 0 30 30 30 180 8263R073 3  8263R083 3  2
3/8 5/8 3 0 150 150 125 180 8210P033 15  - - - 2
1/2 5/8 4 0 150 150 125 180 8210P034 15  - - - 2
3/4 3/4 5.5 0 150 150 125 180 8210P035 16  - - - 2
3/4 3/4 5.5 0 2 2 - 180 8030P083 17  - - - 2
 = Safety Shut-off Valve.  = General Purpose Valve

37
 2/2•3/2•4/2
SERIES
Next
Generation 4
2-Way Optional Features Chart
Base Catalog Number Resilient Materials and Suffix Options Other Standard Rebuild Kit

Mounting Bracket
Manual Operator
Oxygen Service
Stainless Steel

Stainless Steel
Silicone Free

Brass AC/DC
Ammonia 

Urethane
Pipe Orifice

Vacuum
PTFE 
LT NBR
Dry Air

AC/DC
EPDM
Brass

Size Dia.

FKM
NBR

CR
(in) (in)
1/8 3/64 8262R099  8262R175  - SF - - - - - - - -  - - MB 323593-W 323595-W
1/8 3/64 8262R155  8262R168  - SF - - - - - - - -  - - MB 323986-W 323988-W
1/8 3/64 8262R156 8262R169 NH SF -  A V E J N T - - - MB 323986 323988
1/8 3/32 8262R277 8262R178 NH SF -  A V E J N T - MS MB 323593 323595
1/8 3/32 8262R128 8262R236 NH SF -  A V E J N T - - - MB 323987 323989
1/8 1/8 8262R105 8262R174 NH SF -  A V E J N T - VH MS MB 323593 323595
1/8 1/8 8262R077
- - SF - -  - - - - - - - - MB 325039 -
1/8 1/8 8262R129 8262R237 NH SF -  A V E J N T - VH - MB 323987 323989
1/4 3/64 8262R107  8262R181  - SF - - - - - - - -  - - MB 323593-W 323595-W
1/4 3/64 8262R161  8262R199  - SF - - - - - - - -  - - MB 323986-W 323988-W
1/4 3/64 8262R260 8262R130 NH SF -  A V E J N T - - - MB 323986 323988
1/4 3/32 8262R109 8262R183 NH SF P  A V E J N T - - MS MB 323593 323595
1/4 3/32 8262R261 8262R134 NH SF -  A V E J N T - - - MB 323987 323989
1/4 1/8 8262R232 8262R184 NH SF P  A V E J N T - - MS MB 323593 323595
1/4 1/8 8262R262 8262R138 NH SF -  A V E J N T - - - MB 323987 323989
1/4 5/32 8262R202 8262R220 NH SF P  A V E J N T - - MS MB 323593 323595
1/4 5/32 8262R263 8262R142 NH SF -  A V E J N T - - - MB 323987 323989
1/4 7/32 8262R208 8262R226 NH SF P  A V E J N T - - MS MB 323593 323595
1/4 7/32 8262R264 8262R148 NH SF -  A V E J N T - - - MB 323987 323989
1/4 9/32 8262R212 8262R230 NH SF P  A V E J N T - VH MS MB 323593 323595
1/4 9/32 8262R265 8262R152 NH SF -  A V E J N T - VH - MB 323987 323989
1/4 9/32 8262R078
- - SF - -  - - - - - - - - MB 325039 -
1/4 5/16 8223P025
- - - -  A - - - - - - - - - 322815 -
3/8 1/8 8263R115 8263R191 NH SF -  A V E J N T - - MS MB 323593 323595
3/8 1/8 8263R070 8263R080 NH SF -  A V E J N T - - - MB 323987 323989
3/8 5/32 8263R200 8263R193 NH SF -  A V E J N T - - MS MB 323593 323595
3/8 5/32 8263R071 8263R081 NH SF -  A V E J N T - - - MB 323987 323989
3/8 7/32 8263R124 8263R332 NH SF -  A V E J N T - - MS MB 323593 323595
3/8 7/32 8263R072 8263R082 NH SF -  A V E J N T - - - MB 323987 323989
3/8 9/32 8263R210 8263R333 NH SF -  A V E J N T - - MS MB 323593 323595
3/8 9/32 8263R073 8263R083 NH SF -  A V E J N T - - - MB 323987 323989
3/8 5/16 8223P027
- - - -  - - - - - - - - - - 322815 -
3/8 5/8 8210P093 - - - -  - V E J N - - VH MO MB 322670 -
3/8 5/8 8210P033 - - - -  - V E J N - - VH - MB 322770 -
3/8 5/8 8210P006 - - - -  - V E J N - - - MO MB 322654 -
1/2 3/8 8223P003
8223P010 - - -  - - - - - - - - - - 322816 322817
1/2 5/8 8210P094 - - - -  - V E J N - - VH MO MB 322670 -
1/2 5/8 8210P034 - - - -  - V E J N - - VH - MB 322770 -
1/2 5/8 - 8210P087 - - -  - V E J N - - - MO MB - 322676
1/2 5/8 8210P007 - - - -  - V E J N - - - MO  MB 322654 -
3/4 5/8 - 8210P088 - - -  - V E J N - - - MO MB - 322676
3/4 3/4 8210P095 - - - -  - V E J N - - VH MO MB 322673 -
3/4 3/4 8030P003 - - - -  - V E J N - - - MO MB 322758 -
3/4 3/4 8210P035 - - - -  - V E J N - - VH - MB 322771 -
3/4 3/4 8030P083 - - - -  - V E J N - - - - MB 322763 -
3/4 3/4 8223P005
- - - -  - - - - - - - - - - 322818 -
1 1 8210P004 - - - -  - V E J N - - - MO - 322677 -
1 1/4 1 1/8 8210P008 - - - -  - V E J N - - - MO - 322680 -
1 1/2 1 1/4 8210P022 - - - -  - V E J N - - - MO - 322680 -
2 1 3/4 8210P100 - - - -  - V E J N - - - MO - 322682 -
 = Standard. Other options may be available. All option combinations may not be available. Please consult your local ASCO contact.
Valve contains PTFE main disc;  Pressure rating reduced by 25%;  Pressure rating limited to 250 psi;
Valve contains Nylon 11 piston.
 Cast UR disc supplied as standard, limits min. ambient temp. to 32˚F (0˚C).
Fuel gas service only; Ambient Temp. -40˚F to 140˚F, Fluid Temp. -40˚F to 167˚F; Gas capacity
for 8262R077 is 18,700 Btu/hr, for 8262R078 53,500 Btu/hr based on 1" W.C. Drop @ 2" W.C. Inlet Pressure, 1000 Btu/cu.ft. or more, 0.64 Specific Gravity Gas.
 NH suffix only available for Stainless Steel constructions.  Water rating, CSA certified up to 232 psi (16 bar).

38
 2/2•3/2•4/2
SERIES

4 Next
Generation

Dimensions: inches (mm)

Const. Ref. 1
Const. B

Ref. B C D E F G H I C H

in 3.98 3.04 2.00 0.69 1.00 1.19 1.87 1.24

1
mm 101 77 51 18 25 30 48 32
in 3.98 3.04 2.00 0.78 1.11 1.56 1.87 1.29 D
2
mm 101 77 51 20 29 40 48 33
in 3.98 3.04 2.00 0.77 1.20 1.88 1.87 1.25 E
3 F
mm 101 77 51 20 30 48 48 32
ANPT
in 3.98 3.04 2.00 1.28 1.84 2.75 1.87 2.28 G BOTH ENDS
4 I

mm 101 77 51 33 47 70 48 58
in 3.98 3.04 2.00 1.05 2.31 - 1.87 3.03 .59
[15]
5 .3 MOUNTING HOLES
mm 101 77 51 27 59 - 48 77 [8]

in 3.98 3.04 2.00 1.13 2.31 - 1.87 3.13

6 .69
mm 101 77 51 29 59 - 48 80 [18]
MOUNTING HOLES
in 3.98 3.04 2.00 1.46 2.19 2.81 1.87 2.28
7
mm 101 77 51 37 56 71 48 58
M5 THREAD
.30 [7.6] MIN. FULL THREAD
in 3.98 3.04 2.00 1.44 2.13 2.81 1.87 2.28 FLOW
DEPTH.
8 2 HOLES FOR MOUNTING.
mm 101 77 51 37 54 71 48 58
in 3.98 3.04 2.00 1.61 3.03 - 1.87 3.6
9
mm 101 77 51 41 77 - 48 91
Const. Ref. 2
in 3.98 3.04 2.00 2.21 3.67 3.75 1.87 - B
10
mm 101 77 51 56 93 95 48 - C H

in 3.98 3.04 2.00 2.36 4.14 4.38 1.87 3.92

11
mm 101 77 51 60 105 111 48 100
D
in 3.98 3.04 2.00 2.75 5.52 5.06 1.87 4.72
12
mm 101 77 51 70 140 129 48 120
in 3.98 3.04 2.00 1.72 2.18 2.75 1.87 2.28 E
F
15
mm 101 77 51 44 55 70 48 58
ANPT
in 3.98 3.04 2.00 1.88 2.57 2.81 1.87 2.28 G BOTH ENDS
I
16
mm 101 77 51 48 65 71 48 58
.87
in 3.98 3.04 2.00 0.85 1.81 2.81 1.87 2.28 [22.2]
17 .34
[9]
MOUNTING HOLES

mm 101 77 51 22 46 71 48 58
in 3.98 3.04 2.00 0.77 1.20 1.88 1.87 1.25
18 .87
mm 101 77 51 20 30 48 48 32 [22.2]
MOUNTING HOLES

M5 THREAD
.30 [7.6] MIN. FULL THREAD
FLOW
DEPTH.
2 HOLES FOR MOUNTING.

Const. Ref. 3 Const. Ref. 4, 7, 15, 16, 17

B
B H
C H
C 1/2 NPT

E
F E
F
ANPT
G BOTH ENDS
I

ANPT I
.75 G BOTH ENDS
[19] PORT 2
.57 MOUNTING HOLES
[14]

.81
[20.6]
MOUNTING HOLES

M5 THREAD
.24 [6] MIN. FULL THREAD DEPTH.
FLOW 2 HOLES FOR MOUNTING

39
 2/2•3/2•4/2
SERIES
Next
Generation 4
Dimensions: inches (mm)

Const. Ref. 5, 6, 9 Const. Ref. 8

B
B
H H
C C
1/2 NPT
1/2 NPT

D D

E E
F
F

G I
I

Const. Ref. 10 Const. Ref. 11, 12

B H
B 1/2 NPT
C
C 1/2 NPT
H

D
D

E
F
F

G I G

Const. Ref. 18

B
H
C 1/2 NPT

E
F

ANPT
G BOTH ENDS

40
 2/2•3/2•4/2
SERIES

4 Next
Generation

3-Way Features
• Three-way (3/2) Next Generation solenoid valves have three ports and two orifices.
When one orifice is open, the other is closed
• Control of air, water, light oil, and other non-corrosive media
• Normally closed (pressure to cylinder port when energized) operation
• Normally open (cylinder port exhausts when energized) operation
• Universal operation (can function as normally open, normally closed, diverter of fluid flow,
or selector of 2 fluid sources configurable by piping)
• Pipe sizes – 1/4 to 3/4 inch

3-Way Specifications (English units)

Operating Pressure Differential (psi)
Approx.
Pipe Orifice Max. AC/DC Max. Agency Agency Shipping
Size Dia. Cv Air-Inert Light Oil Fluid Const. Const. Wattage Weight
(in) (in) Flow Min. Gas Water  @ 300 SSU Temp.˚F Brass Ref. UL Stainless Steel Ref. UL AC/DC (lbs.)
General Service - Normally Closed
1/8 3/64 0.05  0 300 300 300 200
8314R031 1  8314R037 1  2 1.7
1/8 3/32 0.15
0 205 205 190 200
8314R032 1  8314R038 1  2 1.7
1/8 1/8 0.25
0 145 145 100 200
8314R033 1  8314R039 1  2 1.7
1/4 3/64 0.05  0 300 300 300 200
8314R034 2  8314R068 2  2 1.8
1/4 3/32 0.15
0 205 205 190 200
8314R035 2  8314R121 2  2 1.8
1/4 1/8 0.25
0 145 145 100 200
8314R036 2  8314R126 2  2 1.8
1/4 5/32 0.50
0 75 75 75 200
8314R130 2  8314R230 2  2 1.8
1/4 7/32 0.70
0 40 40 40 200
8314R131 2  8314R231 2  2 1.8
1/4 9/32 0.85
0 25 25 25 200
8314R132 2  8314R232 2  2 1.8
1/4 5/64 0.12 0 232 232 232 180 8320P182 3  - - - 2 2.5
1/4 7/64 0.23 0 150 150 150 180 8320P184 3  - - - 2 2.5
1/4 5/32 0.35 0 75 75 75 180 8320P186 3  - - - 2 2.5
1/4 3/32 0.2 5 150 150 100 180 8317P035 4  - - - 2 2.7
1/4 9/32  0.8  10 200 200 200 180 8321P001 5  - - - 2 3.8
3/8 9/32  0.8  10 200 200 200 180 8321P002 5  - - - 2 3.8
3/8 5/8 2.5 10 250 250 - 180 8316P054 6  - - - 2 4.9
1/2 5/8 3.2 10 250 250 - 180 8316P064 6  - - - 2 4.9
3/4 11/16 4.8 10 250 250 - 180 8316P074 7  - - - 2 5.1
NAMUR Mount - 3/2 Normally Closed
1/4 3/32 0.12 - 150 - - 180 8320P704 9  8320P714 9  2 3.2
General Service - Normally Open
1/8 3/64 0.05  0 300 300 300 200
8314R049 1  8314R055 1  2 1.7
1/8 3/32 0.15
0 175 175 175 200
8314R050 1  8314R056 1  2 1.7
1/8 1/8 0.25
0 160 160 160 200
8314R051 1  8314R057 1  2 1.7
1/4 3/64 0.05  0 300 300 300 200
8314R052 2  8314R069 2  2 1.8
1/4 3/32 0.15
0 175 175 175 200
8314R053 2  8314R122 2  2 1.8
1/4 1/8 0.25
0 160 160 160 200
8314R054 2  8314R070 2  2 1.8
1/4 5/32 0.50
0 150 150 150 200
8314R133 2  8314R233 2  2 1.8
1/4 7/32 0.70
0 100 100 100 200
8314R134 2  8314R234 2  2 1.8
1/4 9/32 0.85
0 65 65 65 200
8314R135 2  8314R235 2  2 1.8
1/8 3/64 0.18 - 350 350 350 180 8320P136 8  8320P146 8  2 2.5
1/4 1/32 0.05 - 790 825 825 180 8320P190 3  - - - 2 2.5
1/4 5/64 0.12 0 210 210 210 180 8320P192 3  - - - 2 2.5
1/4 7/64 0.23 0 150 150 150 180 8320P194 3  - - - 2 2.5
General Service - Universal Operation
1/8 3/64 0.05  0 200 200 200 200
8314R041 1  8314R042 1  2 1.7
1/8 3/32 0.15
0 105 85 60 200
8314R043 1  8314R044 1  2 1.7
1/8 1/8 0.25
0 70 70 40 200
8314R045 1  8314R040 1  2 1.7
1/4 3/64 0.05  0 200 200 200 200
8314R006 2  8314R123 2  2 1.8
1/4 3/32 0.15
0 105 85 60 200
8314R007 2  8314R120 2  2 1.8
1/4 1/8 0.25
0 70 70 40 200
8314R008 2  8314R124 2  2 1.8
1/4 5/32 0.50
0 35 35 35 200
8314R127 2  8314R227 2  2 1.8
1/4 7/32 0.70
0 18 18 18 200
8314R128 2  8314R228 2  2 1.8
1/4 9/32 0.85
0 10 10 10 200
8314R129 2  8314R229 2  2 1.8
1/4 5/64 0.12 0 116 116 116 180 8320P172 3  - - - 2 2.5
1/4 7/64 0.23 0 60 60 60 180 8320P174 3  - - - 2 2.5
1/4 5/32 0.35 0 35 35 35 180 8320P176 3  - - - 2 2.5
 = General Purpose Valve. 1/4" exhaust orifice with 0.73 Cv flow;  11/32" exhaust orifice with 1.20 Cv flow;  3/64" exhaust orifice with 0.06 Cv flow.

3/32" exhaust orifice with 0.25 Cv flow.  10 psi minimum for light oils.
Max. fluid temp. 180˚F for light oil @ 45 SSU. Pressure rating for light oil @ 45 SSU.
 Water rating, CSA certified up to 232 psi.
41
 2/2•3/2•4/2
SERIES
Next
Generation 4
3-Way Optional Features Chart
Base Catalog Number Resilient Materials and Suffix Options Other Standard Rebuild Kit

Manual Operator 

Mounting Bracket
Oxygen Service
Stainless Steel

Stainless Steel
Silicone Free

Brass AC/DC
Urethane
Pipe Orifice

Vacuum
PTFE

AC/DC
EPDM
Brass

Size Dia.

FKM
NBR

CR
(in) (in)
1/8 3/64 8314R031 8314R037 SF  V - - N - - - MS MB 323957 323959
1/8 3/64 8314R041 8314R042 SF  V - - N - - - MS MB 323961 323963
1/8 3/64 8314R049 8314R055 SF  V - - N - - - MS MB 323969 323971
1/8 3/32 8314R032 8314R038 SF  V - - N - - - MS MB 323958 323960
1/8 3/32 8314R043 8314R044 SF  V - - N - - - MS MB 323966 323968
1/8 3/32 8314R050 8314R056 SF  V - - N - - - MS MB 323970 323972
1/8 1/8 8314R033 8314R039 SF  V - - N - - - MS MB 323958 323960
1/8 1/8 8314R045 8314R040 SF  V - - N - - - MS MB 323966 323968
1/8 1/8 8314R051 8314R057 SF  V - - N - - - MS MB 323970 323972
1/8 7/16 8320P136 8320P146   V E J N T - - MO/MS MB 322715 322718
1/4 1/32 8320P190 -   V E J N T - - MO/MS MB 322744 -
1/4 3/64 8314R006 8314R123 SF  V - - N - - - MS MB 323961 323963
1/4 3/64 8314R034 8314R068 SF  V - - N - - - MS MB 323957 323959
1/4 3/64 8314R052 8314R069 SF  V - - N - - - MS MB 323969 323971
1/4 5/64 8320P172 -   V E J N T - - MO/MS
MB 322721 -
1/4 5/64 8320P182 -   V E J N T - - MO/MS MB 322722 -
1/4 5/64 8320P192 -   V E J N T - - MO/MS
MB 322723 -
1/4 3/32 8314R007 8314R120 SF  V - - N - - - MS MB 323966 323968
1/4 3/32 8314R035 8314R121 SF  V - - N - - - MS MB 323958 323960
1/4 3/32 8314R053 8314R122 SF  V - - N - - - MS MB 323970 323972
1/4 3/32 8317P035 -   V - - N - - - - - 322919 -
1/4 3/32 8320P704 8320P714   V E J N T - - MO/MS - 322821 322823
1/4 7/64 8320P174 -   V E J N T - - MO/MS
MB 322721 -
1/4 7/64 8320P184 -   V E J N T - - MO/MS MB 322722 -
1/4 7/64 8320P194 -   V E J N T - - MO/MS
MB 322723 -
1/4 1/8 8314R008 8314R124 SF  V - - N - - - MS MB 323966 323968
1/4 1/8 8314R036 8314R126 SF  V - - N - - - MS MB 323958 323960
1/4 1/8 8314R054 8314R070 SF  V - - N - - - MS MB 323970 323972
1/4 5/32 8314R127 8314R227 SF  V - - N - - - MS MB 323966 323968
1/4 5/32 8314R130 8314R230 SF  V - - N - - - MS MB 323958 323960
1/4 5/32 8314R133 8314R233 SF  V - - N - - - MS MB 323970 323972
1/4 5/32 8320P176 -   V E J N T - - MO/MS
MB 322721 -
1/4 5/32 8320P186 -   V E J N T - - MO/MS MB 322722 -
1/4 7/32 8314R128 8314R228 SF  V - - N - - - MS MB 323966 323968
1/4 7/32 8314R131 8314R231 SF  V - - N - - - MS MB 323958 323960
1/4 7/32 8314R134 8314R234 SF  V - - N - - - MS MB 323970 323972
1/4 9/32 8314R129 8314R229 SF  V - - N - - - MS MB 323966 323968
1/4 9/32 8314R132 8314R232 SF  V - - N - - - MS MB 323958 323960
1/4 9/32 8314R135 8314R235 SF  V - - N - - - MS MB 323970 323972
1/4 9/32 8321P001 -   V E - - - - - MO/MS - 322688 -
3/8 9/32 8321P002 -   V E - - - - - MO/MS - 322688 -
3/8 5/8 8316P054 -   V E J N - - - MO MB 322690 -
1/2 5/8 8316P064 -   V E J N - - - MO MB 322690 -
3/4 11/16 8316P074 -   V E J N - - - MO MB 322692 -
 = Standard. Other options may be available. All option combinations may not be available. Please consult your local ASCO contact. Pressure rating reduced by 25%.
 Upper disc is FKM.  Not available with PTFE resilient materials.
Pressure rating limited to 100 psi (6.9 bar) for MO constructions.  Consult factory.

42
 2/2•3/2•4/2
SERIES

4 Next
Generation

Dimensions: inches (mm)

Const. Ref. 1, 2
Const. B
Ref. B C D E F G H I J 1/8 PIPE
THREAD C H
in 3.98 3.04 2.09 0.69 1.00 1.19 1.87 1.24 -
1 3
mm 101 77 53 18 25 30 48 32 - CONDUIT
1/2" NPT
in 3.98 3.04 2.09 0.79 1.19 1.56 1.87 1.29 -
2 D
mm 101 77 53 20 30 40 48 33 -
in 3.98 3.04 2.00 1.02 2.02 1.69 1.87 1.45 0.44
3
mm 101 77 51 26 51 43 48 37 11 E
F
in 3.98 3.04 2.00 0.57 1.07 2.00 1.87 2.05 -
4
mm 101 77 51 14 27 50 48 52 - G
1/4 PIPE THREAD
(2 PLACES) I

in 3.98 3.04 2.00 1.00 2.03 1.31 1.87 3.12 1.00

5
mm 101 77 51 25 52 33 48 79 25 MOUNTING DIMENSIONS MOUNTING DIMENSIONS
(1/8 PIPE SIZE) (1/4 PIPE SIZE)
in 3.98 3.04 2.00 2.12 3.77 2.76 1.87 4.29 - .59
M5 THREAD .87 M5 THREAD
6 [15]
.29 [7] MIN.FULL
THREAD DEPTH .34 [22] .29 [7] MIN.FULL
THREAD DEPTH
mm 101 77 51 54 96 70 48 109 - .30
2 HOLES FOR [9]
2 HOLES FOR
[7.6]
MOUNTING MOUNTING
in 3.98 3.04 2.00 2.5 4.19 - 1.87 3.38 -
7
mm 101 77 51 64 106 - 48 86 - .69
[18]
.87
[22]

in 3.98 3.04 2.00 0.67 1.64 1.19 1.87 - 1.81

8
mm 101 77 51 17 42 30 48 - 46
FLOW FLOW

Const. Ref. 3 Const. Ref. 4

B B
H
H C
C

D
D

1/2 NPT 1/2 NPT

E
E F

F E

2 MOUNTING HOLES I G
.31 [7.8] DEEP FOR
.164 [4.1] THREAD
CUTTING SCREW
I J

G
1.50
[38]

.75
Const. Ref. 5 [19]

B
H
C

D
0.25-20 UNC-2B
0.44 [11.1] DEEP
2 PLACES

G
J
I

43
 2/2•3/2•4/2
SERIES
Next
Generation 4
Dimensions: inches (mm)

Const. Ref. 6 Const. Ref. 7

B
B
H H
C 1/2 NP C
1/2 NPT

D D

E E
F
F

I G

Const. Ref. 8 Const. Ref. 9

3.69 [94]
B 2.91 [74]
H
C 1/2 NPT

D
1/2 NPT 3.04 [77]

E 3.98 [102] 4.30 [109]

F 1/8 NPT
3 PLACES 1 3
1

1.25 [32]
G
MOUNTING 3 2
BRACKET* WITH I
Ø.28 [7] HOLES
2 PLACES 1.85 [47]

1.91 [49]
.95 [24] .27 [7] FOR M5 SCREWS,
1/4 ANPT
1 2 PLACES
.28 [7] FOR .190-24 UNC-2A, &
.190-32 UNF-2A SCREWS,
1.75 [44] 2 PLACES
1.26 [32]

3 Ø.220 x .125 DEEP

2.69 [68]
[Ø5.6] x [3.2] DEEP
1/4 ANPT FOR POSITIONING DOWEL

44
 2/2•3/2•4/2
SERIES

4 Next
Generation

4-Way Features
• Four-way (4/2) and five port (5/2) Next Generation solenoid valves have one pressure port,
2 cylinder ports, and either 1 or 2 exhaust ports
• Control of air, water, light oil, and non-corrosive media
• Single solenoid operation (pressure and exhaust ports and cylinder ports alternate
connection based on solenoid operation)
• Pipe sixes- 1/4 to 1 inch

4-Way Specifications (English units)

Operating Pressure
Differential (psi)
Cv Approx.
Pipe Orifice Flow Max. AC/DC Max. Agency Agency Shipping
Size Dia. Air-Inert Light Oil Fluid Const. Stainless Const. Wattage Weight
(in) (in) Pressure Exhaust Min. Gas Water  @ 300 SSU Temp.˚F Brass Ref. UL Steel Ref. UL AC/DC (lbs.)
General Service - Single Solenoid
1/4 1/16  0.09 0.09 10 150 150 150  180 8345P001 2  - - - 2 4.8
1/4 1/4 0.8 1.0 10 250 250 250 180 8344P070 1  - - - 2 5.2
3/8 3/8 1.4 2.2 10 250 250 250 180 8344P072 3  - - - 2 9.6
1/2 3/8 1.4 2.2 10 250 250 250 180 8344P074 3  - - - 2 9.6
3/4 3/4 5.2 5.6 10 250 250 250 180 8344P076 4  - - - 2 18.6
1 3/4 5.2 5.6 10 250 250 250 180 8344P078 4  - - - 2 18.6
General Service - 4/2 Dual Solenoid
3/8 3/8 1.4 2.2 300 300 200 180 8344P080 5  - - - 2 10.8
NAMUR Mount - 3/2, 5/2 Single Solenoid
1/4 1/4 0.86 0.86 30 150 - - 180 EE8551P401
6  EE8551P409 6  2 4
 = General Purpose Valve. 25 psi minimum for light oils.  3/32" exhaust orifice.  Viscosity 50 SSU max.
Aluminum body.  Water rating, CSA certified up to 232 psi.

Important
A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
Refer to Engineering Section for details.

4-Way Optional Features Chart

Base Catalog Number Resilient Materials and Suffix Options Other Standard Rebuild Kit
Mounting Bracket
Manual Operator
Oxygen Service
Stainless Steel

Brass AC/DC
Urethane

Pipe Orifice
Vacuum
EPDM
Brass

Size Dia.
PTFE
FKM
NBR

CR

(in) (in)
1/4 1/16 8345P001 -  V - - - - - - MO - 322925
1/4 1/4 EE8551P401* EE8551P409  - - - - - - - MH/MS - -
1/4 1/4 8344P070 -  V - - - - - - MO - 322696
3/4 3/4 8344P080 -  V - - - - - - MO 322700
3/8 3/8 8344P072 -  V - - - - - - MO - 322697
1/2 3/8 8344P074 -  V - - - - - - MO - 322697
3/4 3/4 8344P076 -  V - - - - - - MO - 322698
1 3/4 8344P078 -  V - - - - - - MO - 322698
 = Standard. * Aluminum body.

45
 2/2•3/2•4/2
SERIES
Next
Generation 4
Dimensions: inches (mm)
Const. Exhaust
Ref. B C D E F G H I J K Pipe Size
in 3.98 3.04 2.0 1.12 2.08 2.94 1.87 4.82 1.03 1.41
1 3/8
mm 101 77 51 28 53 75 48 122 26 112
in 3.98 3.04 2.09 1.00 1.75 2.06 1.87 3.00 1.09 -
2 1/4
mm 101 77 53 25 44 52 35 76 28 -
in 3.98 3.04 2.0 0.94 2.06 3.18 1.87 6.05 1.50 1.86
3 1/2
mm 101 77 51 24 52 81 48 154 38 47
in 3.98 3.04 2.0 1.31 2.86 4.12 1.87 8.25 2.10 2.12
4 1
mm 101 77 51 33 73 105 48 210 53 54

Const. Ref. 1

B 1/2 NPT
C H

F
E

K J
G
I

Const. Ref. 2

B
H C

1/2 NPT

F
E

G J
I

46
 2/2•3/2•4/2
SERIES

4 Next
Generation

Dimensions: inches (mm)

Const. Ref. 3, 4
B
H
C
1/2 NPT

E
F

K G J
I

Const. Ref. 5
PIPE THREAD
2.62 3 PLACES

1.50

1.06
4.00
Ø.34 1.87
2 HOLES FOR 3.04
MOUNTING 1.87

B A
1.96
1.19
1.62

SOL B
3.18
2.13
3.12 1.56
SOL A
1.16
1.56
E
1.88 2.68
P
P E

1/2 PIPE
1.75
THREAD
.83 3.09
1.86
6.06

Const. Ref. 6
Series 8551
NPT 1/4
L1 4.96 (126) 4.00 4.00

L2 6.50 (165) 3.04 3.04

H2 3.97 (101)
H1 1.57 (40)
W 1.77 (45)
H2

Optional Manual Operators 3 1

Add Suffix Description H1

1
Push and turn to lock with flat head
MO
screwdriver slot W
0 2 1/8 NPT AUX. PRESSURE PORT

1 L1
Momentary push in with flat head
MI L2
screwdriver slot
0 2
1 8551 NAMUR FOOTPRINT

MH Momentary push in by hand

0 2
1.26 (32)

2 4

MS Push and turn to lock by hand

0 2

.95 (24)

47
Global Contacts
Australia (61) 2-9-451-7077 France (33) 1-47-14-32-00 Netherlands (31) 33-277-7911
Brazil (55) 11-4208-1700 Germany (49) 7237-9960 Singapore (65) 6556-1100
Canada (1) 519-758-2700 India (91) 44-39197300 South Korea (82) 2-3483-1570
China (86) 21-3395-0000 Italy (39) 02-356931 Spain (34) 942-87-6100
Czech Republic (420) 235-090-061 Japan (81) 798-65-6361 Turkey (90) 216-577-3107
Dubai - UAE (971) 4 811 8200 Mexico (52) 55-5809-5640 United Kingdom (44) 1695-713600

ASCO Valve, Inc. | Tel (1) 800.972.2726 | www.ascovalve.com | e-mail: [email protected] 05/14 — V7704