Approval

TO : HP/Quanta
DATE : July. 26, 2005.

SAMSUNG
SAMSUNGTFT-LCD
TFT-LCD
MODEL
MODEL NO.
NO. :: LTN140W1-L01
LTN140W1-L01

NOTE : Extension code [ -E ]

LTN140W1-L01-E
Surface type [ Glare ]

Any Modification of Spec is not allowed without SEC’ permission

APPROVED BY :

PREPARED BY : LCD Application Engineering Group 1, TCS Team

SAMSUNG ELECTRONICS CO., LTD.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 1 / 30

http://www.Datasheet4U.com
 Approval
CONTENTS

Revision History -------------------( 3 )

General Description -------------------( 4 )

1. Absolute Maximum Ratings -------------------( 5 )

1.1 Absolute Ratings of environment
1.2 Electrical Absolute Ratings

2. Optical Characteristics -------------------( 7 )

3. Electrical Characteristics - - - - - - - - - - - - - - - - - - - ( 10 )
3.1 TFT LCD Module
3.2 Backlight Unit

4. Block Diagram - - - - - - - - - - - - - - - - - - - ( 13 )
4.1 TFT LCD Module
4.2 Backlight Unit

5. Input Terminal Pin Assignment - - - - - - - - - - - - - - - - - - - ( 14 )

5.1 Input Signal & Power
5.2 LVDS Interface
5.3 Backlight Unit
5.4 Timing Diagrams of LVDS For Transmitting
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color.
5.6 Pixel format

6. Interface Timing - - - - - - - - - - - - - - - - - - - ( 19 )
6.1 Timing Parameters
6.2 Timing Diagrams of interface Signal
6.3 Power ON/OFF Sequence

7. Outline Dimension - - - - - - - - - - - - - - - - - - - ( 21 )

8. Packing - - - - - - - - - - - - - - - - - - - ( 23 )

9. Markings & Others - - - - - - - - - - - - - - - - - - - ( 24 )

10. General Precaution - - - - - - - - - - - - - - - - - - - ( 26)

11. EDID - - - - - - - - - - - - - - - - - - - ( 28)

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 2 / 30

http://www.Datasheet4U.com
 REVISION
REVISIONHISTORY
HISTORY Approval

Date Revision No. Page Summary

June. 30, 2004 A00 All Approval spec of LTN140W1-L01-1(Glare) Model was issued first.

Oct. 22, 2004 A01 28 Modify the EDID

- Modify the values of ID product code, module revision and
checksum.

July. 26. 2005 A02 140W1-L01-E of Pb free product is introduced.

4 - Add the Pb-free product in features
22 - Change the position of lamp wire tape at outline dimension
23 - Modify the carton in packing
28 - Modify the EDID

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 3 / 30

http://www.Datasheet4U.com
 Approval
GENERAL DESCRIPTION
DESCRIPTION
LTN140W1-L01 is a color active matrix TFT (Thin Film Transistor) liquid crystal display
(LCD) that uses amorphous silicon TFT as a switching devices. This model is composed of
a TFT LCD panel, a driver circuit and a backlight system. The resolution of a 14.0" contains
1280 x 768 pixels and can display up to 262,144 colors. 6 O'clock direction is the Optimum
viewing angle.

FEATURES
• Thin and light weight
• High contrast ratio
• Wide XGA (1280x768 pixels) resolution
• Low power consumption
• DE (Data enable) only mode.
• 3.3V LVDS Interface
• On board EDID chip
• Pb-free product

APPLICATIONS
• Notebook PC
• If the usage of this product is not for PC application, but for others, please contact SEC

GENERAL INFORMATION

Item Specification Unit Note

Display area 305.28(H) X 183.168(V) (14.02”diagonal) mm

Driver element a-si TFT active matrix

Display colors 262,144

Number of pixel 1280 x 768 (Wide XGA ) pixel

Pixel arrangement RGB vertical stripe

Pixel pitch 0.2385(H) x 0.2385(V) mm

Display Mode Normally white

Surface treatment Haze 0 (Glare) , Hardness 3H

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 4 / 30

http://www.Datasheet4U.com
 Mechanical Information
Approval
Item Min. Typ. Max. Unit Note
Horizontal (H) 319.5 320 320.5 mm
Module
Vertical (V) 198.5 199.0 199.5 mm
size
Depth (D) - 5.2 5.5 mm (1)
Weight - 400 415 g

Note (1) Measurement condition of outline dimension

. Equipment : Vernier Calipers
. Push Force : 500g ⋅f (minimum)

1. ABSOLUTE MAXIMUM RATINGS

1.1 ENVIRONMENTAL ABSOLUTE RATINGS

Item Symbol Min. Max. Unit Note

Storage temperate TSTG -20 60 °C (1)
Operating temperate
TOPR 0 50 °C (1)
(Temperature of glass surface)
Shock ( non-operating ) Snop - 240 G (2),(4)
Vibration (non-operating) Vnop - 2.41 G (3),(4)

Note (1) Temperature and relative humidity range are shown in the figure below.
95 % RH Max. (40 °C ≥ Ta)
Maximum wet - bulb temperature at 39 OC or less. (Ta > 40 °C ) No condensation

Relative Humidity ( %RH)

100 90
( 40,90 )

80

60
Operating Range
( 50,50.4 )
40
( 60,27.7 )
20

5
Storage Range
0
-40 -20 0 20 40 60 80

Temperature (OC)
(2) 2ms, half sine wave, one time for ±X, ±Y, ± Z.
(3) 5 - 500 Hz, random vibration, 30min for X, Y, Z.
(4) At testing Vibration and Shock, the fixture in holding the Module to be tested have to be
hard and rigid enough so that the Module would not be twisted or bent by the fixture.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 5 / 30

http://www.Datasheet4U.com
 Approval
1.2 ELECTRICAL ABSOLUTE RATINGS

(1) TFT LCD MODULE

VDD =3.3V, VSS = GND = 0V

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD VDD – 0.3 VDD + 0.3 V (1)

Logic Input Voltage VDD VDD – 0.3 VDD + 0.3 V (1)

Note (1) Within Ta (25 ± 2 °C )

(2) BACK-LIGHT UNIT

Ta = 25 ± 2 °C

Item Symbol Min. Max. Unit Note

Lamp Current IL 2.0 7.0 mArms (1)

Lamp frequency FL 50 80 kHz (1)

Note 1) Permanent damage to the device may occur if maximum values are exceeded
Functional operation should be restricted to the conditions described under normal operating conditions.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 6 / 30

http://www.Datasheet4U.com
 Approval
2. OPTICAL CHARACTERISTICS

The following items are measured under stable conditions. The optical characteristics
should be measured in a dark room or equivalent state with the methods shown in Note (5).
Measuring equipment : TOPCON BM-5A and PR-650

* Ta = 25 ± 2 °C, VDD=3.3V, fv= 60Hz, fDCLK = 68.93MHz, IL = 6.0 mA

Item Symbol Condition Min. Typ. Max Unit Note

Contrast Ratio
CR 300 - - - (1), (2), (5)
(5 Points)

Response Time at Ta
TRT - 27 35 msec (1), (3)
( Rising + Falling )

Average Luminance IL=6.0mA

YL,AVE 175 200 - cd/m2
of White (5 Points) (1), (4)
Normal
RX Viewing 0.560 0.590 0.620
Red Angle
RY φ=0 0.310 0.340 0.370

GX θ=0 0.290 0.320 0.350

Green
Color GY 0.520 0.550 0.580 (1), (5)
Chromaticity - PR-650
( CIE ) BX 0.122 0.152 0.182
Blue
BY 0.106 0.136 0.166

WX 0.283 0.313 0.343

White
WY 0.299 0.329 0.359

θL 40 45
Hor.
Viewing θH 40 45 Degree
(1), (5)
CR ≥ 10 s
Angle φH 15 20 BM-5A
Ver.
φL 40 45

13 Points
δL - - 2.2 - (6)
White Variation

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 7 / 30

http://www.Datasheet4U.com
 Note 1) Definition of Viewing Angle : Viewing angle range(10 ≤ C/R) Approval
Normal Line
φ = 0o, θ = 0o

θL
θR
φH
φL 12 O’clock
θ L =90o x y direction
φ H = 90o

6 O’clock y' x'

direction
θR =90o
φ L= 90o

Note 2) Definition of Contrast Ratio (CR) : Ratio of gray max (Gmax) ,gray min (Gmin)
at 5 points(4, 5, 7, 9, 10)

CR(4) + CR(5) + CR(7) + CR(9) + CR(10)

CR =
5

Points : 4 , 5 , 7 , 9 , 10 at the figure of Note (6).

Note 3) Definition of Response time :

Display data White(TFT OFF) Black(TFT ON) White(TFT OFF)

TR TF
100%
90%
Optical
Response
10%
0%
Time
Note 4) Definition of Average Luminance of White : measure the luminance of white at 5 points.

(320) ( 640) (960)

VIEW AREA
Average Luminance of White ( YL,AVE ) 10 9 (192)
YL4 + YL5 + YL7 + YL9 + YL10 7 (384)
YL,AVE =
5 5 4 (576)
(lines)

: test point
Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 8 / 30

http://www.Datasheet4U.com
 Approval
Note 5) After stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement
should be executed. Measurement should be executed in a stable, windless,and dark room.
30 min after lighting the backlight. This should be measured in the center of screen.
Lamp current : 6.0mA ( Inverter : SIC-130T )
Environment condition : Ta = 25 ± 2 °C

Photo-detector
( TOPCON BM-5A
PR-650 )

Field = 2°
50 cm

TFT-LCD module LCD panel

Center of the screen

[ Optical characteristics measurement setup ]

Note 6) Definition of 13 points white variation (δ L ), [ 1 ~ 13 ]

Maximum luminance of 13 points
δL =
Minimum luminance of 13 points

10mm 10mm
320 640 960
10mm
13 12 11

10 9 192

8 7 6 384 : test point

5 4 576
(lines)
3 2 1
10mm

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 9 / 30

http://www.Datasheet4U.com
3. ELECTRICAL CHARACTERISTICS Approval
3.1 TFT LCD MODULE
Ta= 25 ± 2°C

Item Symbol Min. Typ. Max. Unit Note

Voltage of Power Supply VDD 3.0 3.3 3.6 V

Differential Input High VIH - - +100 mV VCM = +1.2V

Voltage for LVDS
Receiver Threshold Low VIL -100 - - mV

Vsync Frequency fv - 60 - Hz

Hsync Frequency fH - 48.96 - KHz

Main Frequency fDCLK - 68.93 - MHz

Rush Current IRUSH - - 1.5 A (4)

White - 360 - mA (2),(3)*a

Current of Power IDD
Mosaic - 380 - mA (2),(3)*b
Supply
V. Stripe - 450 500 mA (2),(3)*c

Note (1) Display data pins and timing signal pins should be connected.( GND = 0V )
(2) fV = 60Hz, fDCLK = 68.93MHZ, VDD = 3.3V , DC Current.
(3) Power dissipation pattern

*a) White Pattern *b) Mosaic Pattern

VIEW AREA

Display Brightest Gray Level

Display Darkest Gray Level

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 10 / 30

http://www.Datasheet4U.com
 Approval
*c) 1dot Vertical stripe pattern

RG B R G B R G B R G

RG B R G B R G B R G

RG B R G B R G B R G

RG B R G B R G B R G

4) Rush current measurement condition

3.3V M1
2SK1059
VDD ( LCD INPUT)
FUSE
R1 C1
47K 1uF

R2
CONTROL SIGNAL M2
(HIGH to LOW) 2SK1399
1K

12V
R3 C2

C3 47K
10000pF
1uF

VDD rising time is 470us

3.3V
0.9VDD

0.1VDD
GND
470us

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 11 / 30

http://www.Datasheet4U.com
 3.2 BACK-LIGHT UNIT Approval
The backlight system is an edge-lighting type with a single CCFT ( Cold Cathode Fluorescent Tube ).
The characteristics of a single lamp are shown in the following table.
- INVERTER : SEM SIC 130T Ta= 25 ± 2 °C
Item Symbol Min. Typ. Max. Unit Note
Lamp Current IL 3.0 6.0 6.5 mArms (1)
Lamp Voltage VL - 670 - Vrms IL=6.0mA
Frequency fL 50 60 65 KHz (2)
(3)
Power Consumption PL 4.2 W
IL=6.0mA
Operating Life Time Hr 10,000 Hour (4)
1350 Vrms 25°C, (5)
Startup Voltage VS - -
1600 Vrms 0°C, (5)
Lamp startup time - - 1.0 sec (5)
Note) The waveform of the inverter output voltage must be area symmetric and the design of the
inverter must have specifications for the modularized lamp.

The performance of the backlight, for example life time or brightness, is much influenced by the
characteristics of the DC-AC inverter for the lamp. So all the parameters of an inverter should be carefully
designed so as not to produce too much leakage current from high-voltage output of the inverter.
When you design or order the inverter, please make sure that a poor lighting caused by the mismatch of
the backlight and the inverter(miss lighting, flicker, etc.) never occur. When you confirm it, the module
should be operated in the same condition as it is installed in your instrument.
Note (1) Lamp current is measured with a high frequency current meter as shown below.

HOT : ( Pink )
1
LCD COLD : ( White )
MODULE 2 INVERTER
A (SIC-130T)

(2) Lamp frequency may produce interference with horizontal synchronous frequency and this
may cause line flow on the display. Therefore lamp frequency should be detached from the
horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference.

(3) Refer to IL ×VL to calculate.

(4) Life time (Hr) of a lamp can be defined as the time in which it continues to operate under the
condition Ta= 25 ± 2 °C and IL = 6.0 mArms until one of the following event occurs.

1. When the brightness becomes 50% or lower than the original.

2. When the Effective ignition length becomes 80% or lower than the original value.
(Effective ignition length is defined as an area that has less than 70% brightness compared to
the brightness in the center point.)

(5) The inverter open voltage - this voltage should be measured after ballast capacitor- have to be larger
than the lamp startup voltage, otherwise backlight may has blinking for a moment after turns on
or not be turned on.
If an inverter has shutdown function it should keep its open voltage for longer than 1 second
even if lamp connector open.
Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 12 / 30

http://www.Datasheet4U.com
 Approval
4. BLOCK DIAGRAM
4.1 TFT LCD Module

I2 C bus EDID
EEPROM
LVDS
Input- RSDS
Connector LVDS Input/RSDS Output
FI-XB30S-HF10 Timing Controller
or Compatible
Source
Driver
IC 14.0” WXGA

Gamma TFT-LCD Panel

DC-DC
Converter Generator

VCOM
Generator

Gate Pulse
Generator

SOURCE PCB
Gate IC
Video Signal
Control Signal
VCOM
Gamma
DVDD
AVDD
Von/Voff

4.2 BACK-LIGHT UNIT

Reflector
1 HOT (Pink)
LAMP

2 COLD(White)

Note) The output of the inverter may change according to the material of the reflector.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 13 / 30

http://www.Datasheet4U.com
 Approval
5. INPUT TERMINAL PIN ASSIGNMENT
5.1. Input Signal & Power LVDS, Connector : (JAE, FI-XB30SL-HF10 or Compatible)
Mating Connector :(JAE FI-X30M or Compatible)

PIN NO SYMBOL FUNCTION POLARITY REMARK

1 VSS Ground
2 VDD POWER SUPPLY +3.3V
3 VDD POWER SUPPLY +3.3V
4 VEEDID DDC 3.3V Power
5 NC No Connection
6 CLKEDID DDC Clock

7 DATAEDID DDC data

8 RxIN0- LVDS Differential Data INPUT (R0-R5,G0) Negative

9 RxIN0+ LVDS Differential Data INPUT (R0-R5,G0) Positive
10 VSS Ground
11 RxIN1- LVDS Differential Data INPUT (G1-G5,B0-B1) Negative
12 RxIN1+ LVDS Differential Data INPUT (G1-G5,B0-B1) Positive
13 VSS Ground
14 RxIN2- LVDS Differential Data INPUT (B2-B5,Sync,DE) Negative

15 RxIN2+ LVDS Differential Data INPUT (B2-B5,Sync,DE) Positive

16 VSS Ground
17 RxCLK- LVDS Differential Data INPUT (Clock) Negative
18 RxCLK+ LVDS Differential Data INPUT (Clock) Positive
19 VSS Ground
20 NC No Connection
21 NC No Connection
22 NC No Connection
23 NC No Connection
24 NC No Connection
25 NC No Connection
26 NC No Connection
27 NC No Connection
28 NC No Connection
29 NC No Connection
30 NC No Connection

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 14 / 30

http://www.Datasheet4U.com
 Approval
5.2 LVDS Interface : Transmitter DS90CF383 or Compatible

Pin No. Name RGB Signal Pin No. Name RGB Signal

51 TxIN0 R0 14 TxIN14 G5

52 TxIN1 R1 15 TxIN15 B0

54 TxIN2 R2 19 TxIN18 B1

55 TxIN3 R3 20 TxIN19 B2

56 TxIN4 R4 22 TxIN20 B3

3 TxIN6 R5 23 TxIN21 B4

4 TxIN7 G0 24 TxIN22 B5

6 TxIN8 G1 27 TxIN24 Hsync

7 TxIN9 G2 28 TxIN25 Vsync

11 TxIN12 G3 30 TxIN26 DE

12 TxIN13 G4 31 TxCLKIN Clock

LVDS INTERFACE

Graphics controller DS90CF383 FI-XB30S-HF10 Integrated IC

18-bit RED0 51 48
RED1 52 TxOUT0- 8 RxIN0-
RED2 54 47 100 Ω
RED3 55 TxOUT0+ 9 RxIN0+
RED4 56
RED5 3 46
GREEN0 4 TxOUT1- 11 RxIN1-
GREEN1 6 100Ω
45
GREEN2 7 TxOUT1+ 12 RxIN1+
GREEN3 11
GREEN4 12
42
GREEN5 14 TxOUT2- 14 RxIN2-
BLUE0 15 100 Ω
41
BLUE1 19 TxOUT2+ 15 RxIN2+
BLUE2 20
BLUE3 22 40
BLUE4 23 TxCLKOUT- 17 RxCLKIN-
BLUE5 24 100 Ω
39
Hsync 27 TxCLKOUT+ 18 RxCLKIN+
Vsync 28
Enable 30
CLOCK 31
Note : The LCD Module uses a 100ohm resistor between positive and negative lines of each
receiver input.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 15 / 30

http://www.Datasheet4U.com
 Approval
5.3 BACK LIGHT UNIT

Connector : JST BHSR - 02VS -1

Mating Connector : SM02B-BHSS-1(JST)

Pin NO. Symbol Color Function

1 HOT Pink High Voltage

2 COLD White Low Voltage

5.4 Timing Diagrams of LVDS For Transmission

LVDS Receiver : Integrated T-CON

T
O_TxCLK OUT
0_RxCLK IN

T/7

O_RxIN2 TxIN20 TxIN19 TxIN18 TxIN17 TxIN16 TxIN15 TxIN14

DE Vsync Hsync B5 B4 B3 B2

O_RxIN1 TxIN13 TxIN12 TxIN11 TxIN10 TxIN9 TxIN8 TxIN7

B1 B0 G5 G4 G3 G2 G1

O_RxIN0 TxIN6 TxIN5 TxIN4 TxIN3 TxIN2 TxIN1 TxIN0

G0 R5 R4 R3 R2 R1 R0

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 16 / 30

http://www.Datasheet4U.com
 Approval
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
Data Signal Gray
Color Display Red Green Blue Scale
R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 45 B5 Level

Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 -
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 -
Basic Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 -
Colors Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 -
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 -
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 -
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0
Dark 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1

Gray ↑ 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
Scale : : : : : : : : : : : : : : : : : : :
R3∼R60
Of : : : : : : : : : : : : : : : : : : :
Red
↓ 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 R61
Light 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 R62
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 R63
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0
Dark 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 G1

Gray ↑ 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 G2
Scale : : : : : : : : : : : : : : : : : : :
G3∼G60
Of : : : : : : : : : : : : : : : : : : :
Green
↓ 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0 G61
Light 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 G62
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 G63
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0
Dark 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 B1

Gray ↑ 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 B2
Scale : : : : : : : : : : : : : : : : : : :
B3∼B60
Of : : : : : : : : : : : : : : : : : : :
Blue
↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 B61
Light 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 B62
Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 B63
Note 1) Definition of gray :
Rn: Red gray, Gn: Green gray, Bn: Blue gray (n=gray level)
Note 2)Input signal: 0 =Low level voltage, 1=High level voltage
Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 17 / 30

http://www.Datasheet4U.com
 Approval
5.6 Pixel Format in the display

Pixel 1 Pixel 1280

Line 1 R G B R G B R G B R G B

LTN140W1-L01 Panel

Line 768 R G B R G B R G B R G B

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 18 / 30

http://www.Datasheet4U.com
6. INTERFACE TIMING
Approval

6.1 Timing Parameters

Signal Item Symbol Min. Typ. Max. Unit Note

Frame Frequency Cycle TV 806 816 833 Lines -

Vertical Active Display

TVD - 768 - Lines -
Display Term Period

One Line
Cycle TH 1316 1440 1500 Clocks -
Scanning Time

Horizontal Active Display

THD - 1280 - Clocks -
Display Term Period

6.2 Timing diagrams of interface signal

TV

TVD

DE

TH

DCLK
TC
THD

DE

DATA Valid display data ( 1280 clocks)

SIGNALS

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 19 / 30

http://www.Datasheet4U.com
 6.3 Power ON/OFF Sequence Approval
: To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
should be as the diagram below.

Power Supply 0.9 VDD 0.9 VDD

VDD 0.1 VDD
0.1 VDD
0V

0.5 < T1 ≤ 10 msec T1

0 < T2 ≤ 50 msec T3
0 < T3 ≤ 50 msec T2 T4
500 msec ≤ T4
Signals VALID
0V

Power On Power Off

Back-light
200 msec ≤ T5 50% 50%
200 msec ≤ T6

T5 T6

Power ON/OFF Sequence

T1 : Vdd rising time from 10% to 90%

T2 : The time from Vdd to valid data at power ON.
T3 : The time from valid data off to Vdd off at power Off.
T4 : Vdd off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.

NOTE.
(1) The supply voltage of the external system for the module input should be the same
as the definition of VDD.

(2) Apply the lamp voltage within the LCD operation range. When the back-light turns on
before the LCD operation or the LCD turns off before the back-light turns off, the
display may momentarily become white.

(3) In case of VDD = off level, please keep the level of input signals on the low or keep
a high impedance.

(4) T4 should be measured after the module has been fully discharged between power
off and on period.

(5) Interface signal shall not be kept at high impedance when the power is on.
Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 20 / 30

http://www.Datasheet4U.com
7. MECHANICAL OUTLINE DIMENSION Approval
[ Refer to the next page ]

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 21 / 30

http://www.Datasheet4U.com
http://www.Datasheet4U.com
8. PACKING Approval
1. CARTON(Internal Package)

(1) Packing Form

Corrugated fiberboard box and Corrupad cardboard form as shock absorber

(2) Packing Method

CUSHION CAP PANEL

CUSHION PAD

Note (1)Total : Approx. 7.5Kg

(2)Acceptance number of piling : 10 sets
(3)Carton size : 400(W) X 325(D) X 295(H)

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 23 / 30

http://www.Datasheet4U.com
 Approval
No Part name Quantity

1 Static electric protective sack 10

Packing case (Inner box)

2 1 set
included shock absorber

3 Pictorial marking 2 pcs

4 Carton 1 set

9. MARKINGS & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the

specified location on each product.

(1)Parts number : LTN140W1-L01

(2)Revision : Three letters
(3)Control code : One letter
(4)Lot number : 3 J A XXX XX XX XXX

SEC Revision Code

Panel No.
Cell ID
Lot ID
Month
Product Code
Line

(5) Nameplate Indication

LTN140W1-L01
0512 40 mm

3JAXXXXXXX XXX

80 mm
Parts name : LTN140W1 - L01
Lot number : 3JAXXXXXXX
Inspected work week : 0512(Year 2005, 12th week)
Product Revision Code : XXX

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 24 / 30

http://www.Datasheet4U.com
 Approval

High voltage caution label

HIGH VOLTAGE THIS COVER CONTAINS
CAUTION FLUORESCENT LAMP.
RISK OF ELECTRIC SHOCK
PLEASE FOLLOW LOCAL 10mm High voltage
DISCONNECT THE ELECTRIC
ORDINANCES OR caution
REGULATIONS FOR ITS DISPOSAL
POWER BEFORE SERVICE

70mm

(6) Packing small box attach

DEVICE : LTN140W1-L01
TYPE : XXX
QUANTITY : 10 PCS

CO6040001

(7) Packing box Marking : Samsung TFT-LCD Brand Name

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 25 / 30

http://www.Datasheet4U.com
10. GENERAL PRECAUTIONS Approval

1. Handling

(a) When the module is assembled, It should be attached to the system firmly
using every mounting holes. Be careful not to twist and bend the modules.

(b) Refrain from strong mechanical shock and / or any force to the module. In addition to
damage, this may cause improper operation or damage to the module and CCFT back-light.

(c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch
the surface harder than a HB pencil lead.

(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time,
Staining and discoloration may occur.

(e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth.

(f) The desirable cleaners are water, IPA (Isoprophyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl
chloride. It might permanent damage to the polarizer due to chemical reaction.

(g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or
mouth . In case of contact with hands, legs or clothes, it must be washed away thoroughly
with soap.

(h) Protect the module from static , it may cause damage to the C-MOS Gate Array IC.

(i) Use fingerstalls with soft gloves in order to keep display clean during the incoming
inspection and assembly process.

(j) Do not disassemble the module.

(k) Do not pull or fold the lamp wire.

(l) Do not adjust the variable resistor which is located on the back side.

(m) Protection film for polarizer on the module shall be slowly peeled off just before use so
that the electrostatic charge can be minimized.

(n) Pins of I/F connector shall not be touched directly with bare hands.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 26 / 30

http://www.Datasheet4U.com
2. STORAGE Approval
(a) Do not leave the module in high temperature, and high humidity for a long time.
It is highly recommended to store the module with temperature from 0 to 35 °C and
relative humidity of less than 70%.

(b) Do not store the TFT-LCD module in direct sunlight.

(c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent
light during the store.

3. OPERATION

(a) Do not connect,disconnect the module in the “ Power On” condition.

(b) Power supply should always be turned on/off by following item 6.3
“ Power on/off sequence “.

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference shall be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The cable between the back-light connector and its inverter power supply shall be a
minimized length and be connected directly . The longer cable between the back-light
and the inverter may cause lower luminance of lamp(CCFT) and may require higher
startup voltage (Vs).

(e) The standard limited warranty is only applicable when the module is used for general
notebook applications. If used for purposes other than as specified, SEC is not to be
held reliable for the defective operations. It is strongly recommended to contact SEC
to find out fitness for a particular purpose.

4. OTHERS

(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water. It may result in improper operation or disconnection

of electrode.

(c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input
voltage variation, variation in part contents and environmental temperature, so on)
Otherwise the module may be damaged.

(d) If the module displays the same pattern continuously for a long period of time,it can be
the situation when the image “sticks” to the screen.

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 27 / 30

http://www.Datasheet4U.com
11. EDID Approval
Address Value ASCII
FUNCTION BIN DEC or Notes
(HEX) HEX Data
00 00 00000000 0
01 FF 11111111 255
02 FF 11111111 255
03 FF 11111111 255
Header EDID Header
04 FF 11111111 255
05 FF 11111111 255
06 FF 11111111 255
07 00 00000000 0
08 4C 01001100 76 S 3 character ID
ID Manufacturer Name E
09 A3 10100011 163 C "SEC"
0A 42 01000010 66 [B]
ID Product Code
0B 32 00110010 50 [2]
0C 00 00000000 0
0D 00 00000000 0
32-bit serial no.
0E 00 00000000 0
0F 00 00000000 0
10 Week of manufacture 00 00000000 0
11 Year of manufacture 0F 00001111 15 2005 2005
12 EDID Structure Ver. 01 00000001 1 1 EDID Ver. 1.0
13 EDID revision # 03 00000011 3 3 EDID Rev. 3
14 Video input definition 80 10000000 128
15 Max H image size 1E 00011110 30 30 30.5 cm(approx)
16 Max V image size 12 00010010 18 18 18.3 cm(approx)
17 Display Gamma 78 01111000 120 2.2 Gamma 2.2
18 Feature support 0A 00001010 10
19 Red/green low bits 87 10000111 135 10000111
1A Blue/white low bits F5 11110101 245 11111110
0.580 Red x 0.580=
1B Red x/ high bits 94 10010100 148
1001010010
0.340 Red y 0.340=
1C Red y 57 01010111 87
0101011100
0.310 Green x 0.310=
1D Green x 4F 01001111 79
0100111101
0.550 Green y 0.550=
1E Green y 8C 10001100 140
1000110011
0.155 Blue x 0.155=
1F Blue x 27 00100111 39
001001111
0.155 Blue y 0.155=
20 Blue y 27 00100111 39
001001111
0.313 White x 0.313=
21 White x 50 01010000 80
0101000001
0.329 White y 0.329=
22 White y 54 01010100 84
0101010001
23 Established timing 1 00 00000000 0
24 Established timing 2 00 00000000 0
25 Established timing 3 00 00000000 0

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 28 / 30

http://www.Datasheet4U.com
 Approval
26 01 00000001 1
Standard timing #1 not used
27 01 00000001 1
28 01 00000001 1
Standard timing #2 not used
29 01 00000001 1
2A 01 00000001 1
Standard timing #3 not used
2B 01 00000001 1
2C 01 00000001 1
Standard timing #4 not used
2D 01 00000001 1
2E 01 00000001 1
Standard timing #5 not used
2F 01 00000001 1
30 01 00000001 1
Standard timing #6 not used
31 01 00000001 1
32 01 00000001 1
Standard timing #7 not used
33 01 00000001 1
34 01 00000001 1
Standard timing #8 not used
35 01 00000001 1
36 ED 11101101 237 68.93
Main clock= 68.93 MHz
37 1A 00011010 26
38 00 00000000 0 1280 Hor active=1280 pixels
39 80 10000000 128 128 Hor blanking=128 pixels
3A 50 01010000 80 4bit : 4bit
3B 00 00000000 0 768 Vertcal active=768 lines
3C 30 00110000 48 48 Vertical blanking=48 lines
3D 30 00110000 48 4bit : 4bit
3E 10 00010000 16 16 Hor sync. Offset=16 pixels
3F Detailed timing/monitor 30 00110000 48 48 H sync. Width=48 pixels
descriptor #1 3 V sync. Offset=3 lines
40 36 00110110 54
6 V sync. Width=6 lines

41 00 00000000 0 2bit : 2bit :2bit :2bit

42 31 00110001 49 305 H image size= 305 mm(approx)

43 B7 10110111 183 183 V image size = 183 mm(approx)
44 10 00010000 16
45 00 00000000 0 No Horizontal Border
46 00 00000000 0 No Vertical Border
47 19 00011001 25
48 00 00000000 0
49 00 00000000 0
4A 00 00000000 0 Manufacturer Specified (Timing)
4B 0F 00001111 15
4C 00 00000000 0
4D 00 00000000
Value=HSPWmin / 2
4E 00 00000000
Value=HSPWmax / 2
4F Detailed timing/monitor 00 00000000
Value=Thbpmin /2
50 descriptor #2 00 00000000
Value=Thbpmax /2
51 00 00000000
Value=VSPWmin /2
52 00 00000000
Value=VSPWmax /2
53 00 00000000
Value=Tvbpmin / 2
54 00 00000000
Value=Tvbpmax / 2
55 12 00010010  Thpmin=value*2 + HA pixelclks
56 6E 01101110 
Thpmax=value*2 + HA pixelclks
57 13 00010011  Tvpmin=value*2 + VA lines
58 20 00100000  Tvpmax=value*2 + VA lines
59 03 00000011 3 Module revision

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 29 / 30

http://www.Datasheet4U.com
 Approval
5A 00 00000000 0
5B 00 00000000 0
5C 00 00000000 0 ASCII Data String Tag
5D FE 11111110 254
5E 00 00000000 0
5F 53 01010011 83 [S]
60 41 01000001 65 [A]
61 Detailed timing/monitor 4D 01001101 77 [M]
62 descriptor #3 53 01010011 83 [S]
63 55 01010101 85 [U]
64 4E 01001110 78 [N]
65 47 01000111 71 [G]
66 0A 00001010 10 [^]
67 20 00100000 32 []
68 20 00100000 32 []
69 20 00100000 32 []
6A 20 00100000 32 []
6B 20 00100000 32 []
6C 00 00000000 0
6D 00 00000000 0
6E 00 00000000 0 Monitor Name Tag (ASCII)
6F FE 11111110 254
70 00 00000000 0
71 4C 01001100 76 [L]
72 54 01010100 84 [T]
73 Detailed timing/monitor 4E 01001110 78 [N]
74 descriptor #4 31 00110001 49 [1]
75 34 00110100 52 [4]
76 30 00110000 48 [0]
77 57 01010111 87 [W]
78 31 00110001 49 [1]
79 2D 00101101 45 [-]
7A 4C 01001100 76 [L]
7B 30 00110000 48 [0]
7C 31 00110001 49 [1]
7D 0A 00001010 10 [^]
7E Extension Flag 00 00000000 0
7F Checksum E4 11100100 228

Samsung Secret

Doc.No. LTN140W1-L01 Rev.No 04-A02-G-050726 Page 30 / 30

http://www.Datasheet4U.com