Scribd
Upload
101 views1 page

03112015000000B - Boehler FOX SUM - Ce

This document provides information on a rutile stick electrode called Böhler Fox Sum. It has the following characteristics: 1) It has extraordinarily good weldability in all positions except vertical-down and excellent welding properties on AC with good striking and restriking. 2) It produces a soft arc, minimum spattering, and very easy slag removal, known for fine rippled and smooth weld surfaces. 3) It can be used on steels up to a yield strength of 380 MPa including various steel types.

Uploaded by

kapster Kannour
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
101 views1 page

03112015000000B - Boehler FOX SUM - Ce

This document provides information on a rutile stick electrode called Böhler Fox Sum. It has the following characteristics: 1) It has extraordinarily good weldability in all positions except vertical-down and excellent welding properties on AC with good striking and restriking. 2) It produces a soft arc, minimum spattering, and very easy slag removal, known for fine rippled and smooth weld surfaces. 3) It can be used on steels up to a yield strength of 380 MPa including various steel types.

Uploaded by

kapster Kannour
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BÖHLER FOX SUM

Rutile stick electrode, unalloyed

Classifications
EN ISO 2560-A EN ISO 2560-B: AWS A5.1 AWS A5.1M
E 38 0 RR 12 E4313 A E6013 E4313
Characteristics and typical fields of application
Rutile coated electrode with extraordinarily good weld ability in all positions except vertical-down.
Excellent welding properties on A.C., good striking and restriking characteristics.
Soft arc, minimum spattering, very easy slag removal, famous for fine rippled and smooth weld
surfaces.

Base materials
Steels up to a yield strength of 380 MPa (52 Ksi)
S275JR, S235J0G3 - S355J0G3, P235GH, P265GH, P255NH, P235T1, P355T1, P235T2-P355T2,
P235G1TH, P255G1TH, L210 - L360NB, L290MB, S235JRS1 - S235J0S1, S235JRS2 - S235J0S2
ASTM A36 u A53 Gr. alle; A106 Gr. A, B, C A 135 Gr. A, B; A283 Gr. A, B, C, D; A366; A285 Gr. A,
B, C; A500 Gr. A, B, C; A570 Gr. 30, 33, 36, 40, 45; A607 Gr. 45, A668 Gr. A, B; A907 Gr. 30, 33,
36, 40; A935 Gr.45; A936 Gr. 50; API 5 L Gr. B, X42-X52

Typical analysis of all-weld metal (wt.-%)


C Si Mn
wt.-% 0.07 0.3 0.5
Mechanical properties of all-weld metal
Condition Yield strength Tensile strength Elongation Impact work
Re Rm A (L 0 =5d 0 ) ISO-V KV J
MPa MPa % +20 °C ±0 °C –10 °C
u 430 (≥ 380) 500 (470 – 600) 26 (≥ 20) 75 60 (≥ 47) ≥ 32
u untreated, as welded
Operating data
Polarity: Redrying: Electrode ø (mm) L mm Amps A
DC ( – ) not necessary identification: 2.5 250 60 – 100
AC FOX SUM 6013 3.2 350 90 – 130
E 38 0 RR
4.0 350 110 – 170

All information provided is based upon careful investigation and intensive research. 03/2014
However, we do not assume any liability for correctness and information is subject to change without notice. www.voestalpine.com/welding

You might also like