Scribd
Upload
243 views

JHA Sample

1. The document lists the steps to perform a task involving GRVE work. It identifies potential hazards at each step such as slip/trip/fall, electrical hazards, hand injuries, chemical inhalation, and fire. 2. For each hazard, the document provides control measures to eliminate or minimize the risk of injury. These include ensuring housekeeping, wearing proper PPE like gloves and masks, following safety protocols, and having fire extinguishers available. 3. The task involves preparing the work surface using a grinder, wrapping the GRVE line using resin and catalyst, and final housekeeping. Controls are put in place at each step to reduce risks and ensure the work is done safely.

Uploaded by

Joseph Perez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
243 views

JHA Sample

1. The document lists the steps to perform a task involving GRVE work. It identifies potential hazards at each step such as slip/trip/fall, electrical hazards, hand injuries, chemical inhalation, and fire. 2. For each hazard, the document provides control measures to eliminate or minimize the risk of injury. These include ensuring housekeeping, wearing proper PPE like gloves and masks, following safety protocols, and having fire extinguishers available. 3. The task involves preparing the work surface using a grinder, wrapping the GRVE line using resin and catalyst, and final housekeeping. Controls are put in place at each step to reduce risks and ensure the work is done safely.

Uploaded by

Joseph Perez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

WO Doc. No.

No. List the steps required to perform the task in the sequence they are Against each step list the potential hazards and their risks that Risk Rating WITHOUT For each hazard identified list the control New Risk
carried out. could cause injury and/or harm the environment. Controls measures required to eliminate or minimize the Rating
risk of injury. WITH
Controls

1 Preperation for GRVE work 1)Slip/trip/fall 2B 1.1 Ensure housekeeping. 0B


2)Heat stress 1.2 Proper cable management.
2.Follow heat stress protocol and Work rest
cycle, Carry personal water bottel.

2 Preparation of surface using grinder and Temporary wrapping. 1) Electrical hazard 3B 1)Inspect tools and cables and ensure valid 0B
2)Hand Injury/Pinch point colour code.
3)GRVE Fumes /dust while cutting the line with grinder 2) Use impact resistant glove,PPE's.
4)working at height 3.1)Follow MSDS of GRVE,follow PTSW Rules,Use
5)Falling Objects. P3 type dust mask.Use Face sheild and chemical
goggles for double eye protection.Use chemical
gloves, goggles and suit.
3.2)Identify the nearest safty shower.
4.1)Check and ensure scaffolding is valid.
4.2)wear safty harness while working at height (if
required).
5.1)Barricade the area and put sinages.
5.2)Identify and secure object that can potentialy
fall.
5.3)Spread tarpaulin sheet and keep tools on top
of it. Use tool lineyards.

3 Wrapping GRVE line using - a) Vinylester Resin ,catelist LPT. 1) Inhalation of chemical gases 2B 1)Proper ventilation or resporatory protection, 0B
2) contact with chemicals Use face masks.
3)Fire hazard. 2)Use chemical gloves,Chemical suits, Chemical
goggles and Face sheilds. Follow the MSDS.
3.1)Ensure DCP Fir extinguisher is available at
site.
3.2)Remove or cover flamable materials.
3.3)Keep the chemicals in shaded area.
3.4)carry required quantity to site.

4 House keeping 1)Pinch point 2C 1)Use Hand gloves,PPE's 0C


2)Dust,Dirt 2)Use dust mask
3)Fire hazaed 3) dispose off the condaminated chemical rags in
approprite bins.

You might also like