5/8/2017 966H Wheel Loader BJ600001UP (MACHINE) POWERED BY C11 Engine(SEBP5792 19) Documentation
Previous Screen
Welcome: q301his
Product: WHEEL LOADER
Model: 966H WHEEL LOADER BJ600737
Configuration: 966H Wheel Loader BJ600001UP (MACHINE) POWERED BY
C11 Engine
Disassembly and Assembly
C11 and C13 Engines for Caterpillar Built Machines
Media Number RENR921422 Publication Date 01/05/2015 Date Updated 14/11/2016
i04398594
Rocker Shaft Assemble
SMCS 1102016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P0510 Driver Gp 1
1. Use Tooling (A) to install the bushings for the rocker arms. For correct bearing dimensions, refer to Specifications, "Electronic Unit Injector
Rocker Arm" and Specifications, "Valve Mechanism".
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp 1/2
5/8/2017 966H Wheel Loader BJ600001UP (MACHINE) POWERED BY C11 Engine(SEBP5792 19) Documentation
Illustration 1 g01015498
2. Install stand (5) , rocker arms (4) , rocker arms (3) , and rocker arms (2) onto shaft (6) .
Note: Stand (5) has an offset hole.
Note: Tighten the nuts on rocker arms (4) , rocker arms (3) , and rocker arms (2) to 6 ± 3 N·m (53 ± 27 lb in). The free running torque of the
screws must not exceed 0.4 N·m (3.5 lb in).
3. Install stands (1) .
End By: Install the rocker shaft. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod Install".
Copyright 1993 2017 Caterpillar Inc.
All Rights Reserved.
Mon May 08 2017 12:38:49 GMT+0400 (Arabian Standard Time)
q301his
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sisweb/techdoc/techdoc_print_page.jsp 2/2
