Scribd
Upload
190 views2 pages

Data Sheet: INJECTO-COMPACT (IC) 650/712V

The document is a data sheet for the INJECTO-COMPACT (IC) 650/712V grout pump. It consists of a high-shear mixer, agitator, and grout pump. The equipment is compact and can be operated by one person. It is suitable for mixing and injecting common grout and mortar mixtures. The grout pump is a vertical single-acting plunger pump that uses a hydraulic system for fast suction and minimal pressure drop, allowing it to handle mixes with low water-cement ratios and sand particles up to 8 mm.

Uploaded by

Julian Fraile
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
190 views2 pages

Data Sheet: INJECTO-COMPACT (IC) 650/712V

The document is a data sheet for the INJECTO-COMPACT (IC) 650/712V grout pump. It consists of a high-shear mixer, agitator, and grout pump. The equipment is compact and can be operated by one person. It is suitable for mixing and injecting common grout and mortar mixtures. The grout pump is a vertical single-acting plunger pump that uses a hydraulic system for fast suction and minimal pressure drop, allowing it to handle mixes with low water-cement ratios and sand particles up to 8 mm.

Uploaded by

Julian Fraile
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data sheet

INJECTO-COMPACT (IC) 650/712V

 Grout pump ZMP 712V


3OXQJHU‘

 Capacity, max. (W/C = 1) m³/h 4.9


Pressure, max. bar 88
3OXQJHU‘ Particle size, max. mm 8

Oil content l 110

Power consumption 50 Hz kW 17.3
OPLQ

3OXQJHU‘
 60 Hz kW 19.7
Weight kg 1130


Water connection BSP 1“



Cooling water connection BSP ½“

Cooling water consumption l/min 3-4
 Discharge BSP 2“
                   

EDU
Häny AG reserves the rigt to make improvements and modifications to their equipment without notice.
INJECTO-COMPACT (IC) 650/712V GROUTING UNIT
consisting of high-shear mixer HCM 300, agitator HRW 350, grout pump ZMP 712V.

The plant is suitable to mix and inject all common grout and mortar mixtures. Due to the compact and functional
arrangement of the individual components, the equipment can easily be handled by only one operator. A central
lifting eye makes the loading and unloading of the unit extremely easy. Simple operation, easy maintenance and
cleaning, high quality and safety standards are some of the outstanding features of this unit.

HIGH-SHEAR MIXER HCM 300


The mixer consists of a mixing tank and a high-speed mixing pump. The special mixing effect is achieved by an
extremely high turbulence created in the pump casing. This turbulence with its high shear forces separates the
cement or bentonite particles which results in a fully hydrated suspension. For the mixing of suspensions with low
water/cement ratios or mortar, a high performance mixing pump TMP 22 and/or an additional mixing unit (option)
can be installed in the mixing tank to guarantee efficient pre-wetting of the dry admixtures.

AGITATOR HRW 350


The slow stirring paddle prevents the grout from settling out of suspension and removes any air bubbles from the
mix. The slanting paddle together with a special arrangement of the paddle blades ensure complete circulation of
the tank content. A safety switch stops the agitator whenever the tank cover is removed.

GROUT PUMP ZMP 712V


The ZMP 712V is a vertical single acting plunger pump powered by a special hydraulic system. Due to the unique
design of this system, the back or suction stroke is always carried out at high speed. Therefore the pressure drop
resembles that of a double acting pump and is minimal. The advantage of the fast suction stroke is that the grout
passes the suction valve of the pump at relatively high velocity. Thus, heavy particles which tend to settle on the
suction valve during the working stroke will be flushed away and the valve is always kept clear. Mixes with low water/
cement ratios and sand particles of up to 8 mm in size do not create any problems.

The ZMP 712V is equipped with precise pressure and flow control valves which allow stepless pre-setting of both
maximum pressure and flow independently. Whenever the pre-set pressure is reached, the pump automatically
stops and maintains that pressure without fluctuations to ensure complete filling of the grout hole. For continuous
operation and warm climatic conditions the hydraulic power pack is provided with a water connection for the cooling
of the hydraulic oil.

Häny AG · Buechstrasse 20 · CH-8645 Jona / Switzerland


Tel. +41 44 925 41 11 · Fax +41 44 923 62 45 · www.haeny.com

You might also like