Scribd
Upload
367 views2 pages

SATIP-A-114-01 Earthworks: Site Preparation, Excavation and Backfilling During Construction

This document outlines inspection requirements for various construction activities including earthworks, cast-in-place concrete, coating of concrete surfaces, asphalt paving, and precast/prestressed concrete. It lists over 30 separate inspection procedures covering materials receiving, installation, testing, and final acceptance for each construction process. The inspections are intended to ensure specifications are followed and quality is maintained throughout the project.

Uploaded by

Nino Celso Astillero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
367 views2 pages

SATIP-A-114-01 Earthworks: Site Preparation, Excavation and Backfilling During Construction

This document outlines inspection requirements for various construction activities including earthworks, cast-in-place concrete, coating of concrete surfaces, asphalt paving, and precast/prestressed concrete. It lists over 30 separate inspection procedures covering materials receiving, installation, testing, and final acceptance for each construction process. The inspections are intended to ensure specifications are followed and quality is maintained throughout the project.

Uploaded by

Nino Celso Astillero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SATIP-A-114-01 EARTHWORKS : SITE PREPARATION, EXCAVATION AND BACKFILLING DURING CONSTRUCTION

DOCUMENT REVIEW
SAIC-A-1001 SOIL SAMPLING, TESTING AND REVIEW OF TEST REPORT
SAIC-A-1007 GEOTECHNICAL INVESTIGATION REQUIREMENTS
RECEIVING INSPECTION
SAIC-A-1002 FILL, SELECT FILL AND MARL CAP MATERIALS RECEIVING INSPECTION
INSTALLATION
SAIC-A-1003 SOIL PROTECTION AND CONTROL, DRAINAGE AND DEWATERING INSPECTION
SAIC-A-1004 FILL, PLACEMENT AND COMPACTION INSPECTION
SAIC-A-1005 COMPACTION TESTING
SAIC-A-1006 FIINAL FILL INSPECTION

SATIP-Q-001-02 CAST-IN PLACE PORTLAND CEMENT CONCRETE


DOCUMENT REVIEW
SAIC-Q-1006 RAW MATERIALS SAMPLING TESTING AND CONCRETE MIX DESIGN APPROVAL
RECEIVING INSPECTION
SAIC-Q-1007 EPOXY COATED STEEL BARS AND EMBEEDED ITEMS RECEIVING INSPECTION
SAIC-Q-1008 HANDLING, STORAGE & PRESERVATION OF EPOXY COATED STEEL BARS INSPECTION
SAIC-Q-1010 CONCRETE PUMP / TRANSIT MIXER INSPECTION
SAIC-M-2021 BOLTS, NUT & WASHER INSPECTION
INSTALLATION
SAIC-Q-1011 GRADE AND SITE PREPARATION INSPECTION
SAIC-Q-1012 FORMWORK INSPECTION
SAIC-Q-1013 INSTALLATION OF EPOXY COATED STEEL BARS, EMBEEDED ITEMS AND FORM CLOUSURE INSPECTION
SAIC-Q-1060 CONCRETE SAMPLING, TESTING AND PLACEMENT INSPECTION
SAIC-Q-1015 CONRETER FINISHING AND CURING INSPECTION
SAIC-Q-1016 FORMWORK STRIPPING INSPECTION
SAIC-Q-1017 CONCRETE TESTING AND FINAL ACCEPTANCE INSPECTION

SATIP-H-003-01 COATING APPLICATION FOR CONCRETE SURFACES


DOCUMENT REVIEW
SAIC-H-2023 REVIEW OF PROCEDURE FOR LIQUID COATINGS ON INDUSTRIAL SERVICES
SAIC-H-2026 COATING EQUIPMENT INSPECTION
SAIC-H-2010 REVIEW OF COATING PERSONNEL QUALIFICATION AND CERTIFICATION
RECEIVING INSPECTION
SAIC-H-1002 CONCRETE COATING AND REPAIR MATERIALS RECEIVING, STORAGE AND PRESERVATION INSPECTION
INSTALLATION
SAIC-H-1003 CONCRETE COATINGS AND PRE-INSTALLATION INSPECTION
SAIC-H-1004 COATING AND FINAL INSTALLATION INSPECTION
SATIP-Q-006-02 CONVENTIONAL AND SULFUR EXTENDED ASPHALT PAVING
DOCUMENT REVIEW
SAIC-Q-1035 AGGREGATE SUBBASE AND BASECOURSE SAMPLING, TESTING AND REVIEW OF TEST REPORT
SAIC-Q-1036 RAW MATERIALS SAMPLING TESTING AND APPROVAL OF ASPHALT MIX DESIGN
RECEIVING INSPECTION
SAIC-Q-1037 AGGREGATE SUBBASE AND BASECOURSE MATERIALS RECEIVING INSPECTION
INSTALLATION
SAIC-Q-1039 GRADE, ELEVATION AND SITE PREPARATION INSPECTION
SAIC-Q-1040 PLACEMENT AND COMPACTION OF SUBBASE AND AGGREGATE BASECOURSE INSPECTION
SAIC-A-1005 COMPACTION TESTING
SAIC-Q-1041 PRIME COATING AND TACK COATING INSPECTION

SAIC-Q-1061 CONVENTIONAL AND SULFUR EXTENDED ASPHALT CONCRETE, RECEIVING, PLACEMENT TESTING INSPECTION
SAIC-Q-1043 ASPHALT CORE DENSITY TESTING
SAIC-Q-1044 ASPHALT PAVING FINAL INSPECTION

SATIP-Q-001-04 STRUCTURAL PRECAST AND PRESTRESSED CONCRETE AT FABRICATION YARDS


DOCUMENT REVIEW
SAIC-Q-1006 CONCRETE DESIGN APPROVAL
RECEIVING INSPECTION
SAIC-Q-1010 CHECK DELIVERY TICKET OR PRINT OUT FOR APPROVED CONCRETE MIX DESIGN
INSTALLATION
SAIC-Q-1022 PRECAST AND PRESTRESSED PRE-CONCRETING INSPECTION
SAIC-Q-1023 PRECAST, PRESTRESSED CONCRETE CASTING BEDS SET-UP INSPECTION
SAIC-Q-1024 TENSIONING AND RELEASING INSPECTION FOR PRESTRESSED / PRE-TENSION CONCRETE
SAIC-Q-1025 PRECAST AND PRESTRESSED CONCRETE PLACEMENT, SAMPLING AND TESTING INSPECTION
SAIC-Q-1026 TENSIONING AND GROUTING INSPECTION FOR PRESTRESSED / POST TENSION CONCRETE
SAIC-Q-1028 PRECAST POST-CONCRETING AND FINAL INSPETION
SAIC-Q-1062 REPAIR OF MAJOR DEFECTS INSPECTION

You might also like