Quidway S5300 Series

Gigabit Switches

Realize Your Potential

Product Brochure

2
Quidway S5300 Series Gigabit Switches
Product Overview

Quidway S5300 series gigabit switches (hereinafter referred to as the S5300s) are new generation Ethernet

Quidway S5300 Series Gigabit Switches

Product Brochure
gigabit switches developed by Huawei to meet the requirements for high-bandwidth access and Ethernet multi-

service convergence, providing powerful Ethernet functions for carriers and enterprise customers. Based on the new

generation high-performance hardware and Huawei Versatile Routing Platform (VRP) software, the S5300 features

large capacity and gigabit interfaces of high density, provides 10G uplinks, meeting customers' requirements for

the 1G and 10G uplink devices of high density. The S5300 can meet the requirements of multiple scenarios such

as service convergence on campus networks and intranets, the access to the IDC at a rate of 1000 Mbit/s, and the

access to computers at a rate of 1000 Mbit/s on intranets.

The S5300 is a case-shaped device with a chassis of 1 U high. The S5300 series are classified into SI (standard)

and EI (enhanced) models. The S5300 of the SI version supports Layer 2 functions and basic Layer 3 functions, and

the S5300 of the EI version supports complicated routing protocols and rich service features. The models of the

S5300 consist of S5324TP-SI, S5328C-SI, S5328C-EI, S5328C-EI-24S, S5348TP-SI, S5352C-SI, S5352C-EI, S5324TP-

PWR-SI, S5328C-PWR-SI, S5328C-PWR-EI, S5348TP-PWR-SI, S5352C-PWR-SI, and S5352C-PWR-EI.

Appearance of the S5300

The S5300 series consist of the following models.

S5324TP-SI S5324TP-PWR-SI S5348TP-SI

S5324TP-SI: It provides twenty- S5324TP-PWR-SI: It provides S5348TP-SI: It provides forty-

four 10/100/1000Base-T ports and twenty-four 10/100/1000Base-T eight 10/100/1000Base-T ports

four 1000Base-X combo ports. It ports and four 1000Base-X and four 1000Base-X combo ports.

has two models: one uses DC power combo ports. It supports two hot- It has two models: one uses DC

modules and the other uses AC swappable AC power modules, power modules and the other uses

power modules. It supports RPS 12 V PoE, and USB interfaces. AC power modules. It supports RPS

power modules in backup mode and 12 V power modules in backup

USB interfaces. mode and USB interfaces.

1
 S5348TP-PWR-SI S5328C-SI S5328C-PWR-SI
Quidway S5300 Series Gigabit Switches

Product Brochure

S5348TP-PWR-SI: It provides S5328C-SI: It provides twenty- S5328C-PWR-SI: It provides

forty-eight 10/100/1000Base-T ports four 10/100/1000Base-T ports, twenty-four 10/100/1000Base-T

and four 1000Base-X combo ports. and supports four 100/1000Base-X ports, and supports four

It supports AC power modules, PoE, combo ports, two 10GE XFP uplink 100/1000Base-X combo ports,

and USB interfaces. ports, four 1000Base-X SFP uplink two 10GE XFP uplink ports, four

ports, two 10GE SFP+ uplink 1000Base-X SFP uplink ports, two

ports, or four 10GE SFP+ ports. 10GE SFP+ uplink ports, or four

The S5328C-SI supports two hot- 10GE SFP+ ports. The S5328C-PWR-

swappable power modules, PoE, SI supports two hot-swappable

and USB interfaces. AC power modules, PoE, and USB

interfaces.

S5352C-SI S5352C-PWR-SI S5328C-EI

S5352C-SI: It provides forty- S5352C-PWR-SI: It provides S5328C-EI: It provides twenty-

eight 10/100/1000Base-T ports, and forty-eight 10/100/1000Base-T four 10/100/1000Base-T ports,

supports two 10GE XFP uplink ports, ports, and supports two 10GE XFP and supports two 10GE XFP uplink

four 1000Base-X SFP uplink ports, two uplink ports, four 1000Base-X SFP ports, four 1000Base-X SFP uplink

10GE SFP+ ports, or four 10GE SFP+ uplink ports, two 10GE SFP+ uplink ports, two 10GE SFP+ uplink

ports. The S5352C-SI supports two hot- ports, or four 10GE SFP+ ports. The ports, or four 10GE SFP+ ports. It

swappable power modules, PoE, and S5352C-PWR-SI supports two hot- supports two hot-swappable power

USB interfaces. swappable AC power modules, modules.

PoE, and USB interfaces.

2
 S5328C-PWR-EI S5328C-EI-24S S5352C-EI

Quidway S5300 Series Gigabit Switches

Product Brochure
S5328C-PWR-EI: It provides S5328C-EI-24S: It provides S5352C-EI: It provides forty-

twenty-four 10/100/1000Base-T twenty-four 100/1000Base-X ports, eight 10/100/1000Base-T ports, and

ports, and supports two 10GE XFP four 10/100/1000Base-T combo supports two 10GE XFP uplink ports,

uplink ports, four 1000Base-X SFP ports, and supports two 10GE four 1000Base-X SFP uplink ports,

uplink ports, or two 10GE SFP+ XFP uplink ports, four 1000Base-X or two 10GE SFP+ ports. It supports

ports. It supports two hot-swappable SFP uplink ports, two 10GE SFP+ two hot-swappable power modules.

AC power modules and PoE. ports, or four 10GE SFP+ ports.

It supports two hot-swappable

power modules.

S5352C-PWR-EI: It provides forty-

S5352C-PWR-EI
eight 10/100/1000Base-T ports, and

supports two 10GE XFP uplink ports,

four 1000Base-X SFP uplink ports, or two

10GE SFP+ ports. It supports two hot-

swappable AC power modules and PoE.

Product Characteristics

Powerful Service Support

The S5300 provides the enhanced selective QinQ function to add outer VLAN tags to packets, without occupying
ACL resources. The S5300 can map the CoS value in the inner VLAN tag of a packet to the outer VLAN tag or
change the CoS value in the outer VLAN tag. In addition, the S5300 can flexibly mark the QoS classes of different
services to carry various services.
The S5300 supports IGMP snooping, IGMPv3 snooping, IGMP filter, IGMP fast leave, and IGMP proxy. The S5300
supports line-speed replication of multicast packets between VLANs, multicast load balancing among member
interfaces of a trunk, and controllable multicast, meeting requirements for IPTV services and other multicast
services.
The S5300 provides the MCE function to isolate users of different VPNs on a device, thus ensuring the security of
user data and reducing the investments of users.

3
 High Reliability
In addition to traditional STP, RSTP, and MSTP, the S5300 supports enhanced Ethernet technologies such as Smart
Link and RRPP, implements millisecond-level protection switchover for links, and ensures the network quality.
Quidway S5300 Series Gigabit Switches

Product Brochure

Smart Link and RRPP both support multi-instance to implement load balancing among links, further improving
bandwidth usage.
The S5300 supports E-Trunk. With this function, a CE can be dual-homed to two PEs through an E-Trunk. E-Trunk
greatly enhances link reliability between devices and implements link aggregation and load balancing between
devices. Reliability of access devices is thus improved.
The S5300 supports SEP, a ring network protocol applied to the link layer of an Ethernet network. SEP is
applicable to open ring networks and can be deployed on upper-layer aggregation devices to provide fast
switchover within 50 ms without interrupting services. Huawei devices have implemented Ethernet link
management through SEP. SEP features simplicity, high reliability, high switchover performance, convenient
maintenance, and flexible topology and enables you to mange and plan networks conveniently.
The S5300 supports dual power modules for backup, and supports AC power input and DC power input at the
same time. Users can select the operation mode of the power supply module, that is, single power supply or
dual power modules, which improves the reliability of devices.
The S5300 EI series support VRRP, and can set up VRRP backup groups with other Layer 3 switches. The
S5300 can set up the backup topology structure when faults occur and keeps the continuity and reliability
of communications, which effectively ensures the stability of networks. Multiple equal-cost routes can be
configured on the S5300 to implement uplink route redundancy. When the active uplink route is faulty, traffic is
automatically switched to a standby route. Thus, multi-level backup is implemented for uplink routes.
The S5300 supports BFD and provides millisecond-level detection for protocols such as OSPF, IS-IS, VRRP, and
PIM to improve network reliability. Conforming to IEEE 802.3ah and 802.1ag, the S5300 supports point-to-
point Ethernet fault management. It can detect faults in the last mile of a direct link on the user side. Ethernet
OAM improves network management and maintenance capabilities on Ethernet and guarantees the stability of
networks.
Perfect QoS Policies and Security Mechanism
The S5300 can implement complex traffic classification based on the information such as the quintuple
information, IP preference, ToS, DSCP, IP protocol type, ICMP type, TCP source interface, VLAN ID, the protocol
type of an Ethernet frame, and CoS. The S5300 supports inbound and outbound ACLs. The S5300 supports
the flow-based two rate and three color CAR. Each interface supports eight priority queues and multiple queue
scheduling algorithms such as WRR, DRR, SP, WRR+SP, and DRR+SP, which effectively ensures the quality of voice,
video and data services.
The S5300 provides multiple security measures to protect information security. It can defend against DoS attacks,
attacks to networks, and attacks to users. DoS attacks include SYN Flood attacks, Land attacks, Smurf attacks,
and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root attacks. Attacks to users include bogus
DHCP serer attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, DHCP request flood attacks, and DoS
attacks that change the CHADDR values of packets.
The S5300 listens to information about the MAC or IP address of an access user, lease, VLAN ID, and interface
by establishing and maintaining a DHCP snooping binding table. In this manner, the problem of locating IP
addresses and interfaces of DHCP users is solved. The S5300 directly discards invalid packets that do not match
binding entries, such as ARP spoofing packets and packets with tampered IP addresses, to prevent man-in-the-

4 middle attacks to campus networks that hackers initiate by using ARP packets. The trusted interface can also be
 configured to ensure validity of the DHCP server.
The S5300 supports strict learning of ARP entries to prevent ARP spoofing attackers from exhausting ARP entries
so that users can access the Internet normally. It also supports IP source check to prevent DoS attacks caused by

Quidway S5300 Series Gigabit Switches

Product Brochure
MAC address spoofing, IP address spoofing, and MAC/IP spoofing.
User information such as the user name, IP address, MAC address, VLAN, access interface, and flag indicating
whether anti-virus software is installed on the client can be bound statically or dynamically, and policies (VLAN,
QoS, ACL) can be delivered dynamically.
The S5300 can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting
MAC address entries by using bogus source MAC address. In this way, MAC addresses of normal users can be
learned and flooding is prevented.
Easy Deployment Without Maintenance
The S5300 supports automatic configuration, plug-and-play, deployment through USB interfaces, and batch
remote upgrade. Upgrade and service delivery of the S5300 can be completed at one time, which simplifies
management and performance in the future. The maintenance costs are thus greatly reduced. The S5300
supports diversified management and maintenance modes such as SNMPv1/v2/v3, CLI, Web network
management, and HGMP, which makes device management more flexible. In addition, the S5300 supports NTP,
SSHv2.0, TACACS+, RMON, multi-log host, interface-based traffic statistics, and NQA, which helps to better plan
and adjust networks.
PoE Function
The S5300 can use PoE power modules with different power levels to provide the PoE function. Powered devices
(PDs) such as IP Phone, WLAN AP, Security, and Buletooth AP can be connected to the S5300 through ethernet
cable. The S5300 provides –48V DC power for the connected PDs. As the power sourcing equipment (PSE), the
S5300 complies with IEEE 802.3af and 802.3at (PoE+) and is compatible with PDs that are incompatible with
802.3af or 802.3at. Each port provides a maximum power of 30 W, complying with IEEE 802.3at. The PoE+
function increases the maximum power of each port and implements intelligent power management in high-
power applications, which helps you use PDs conveniently. In addition, the S5300 can work in power-saving
mode. The S5300 PWR series support improved PoE solutions and you can determine whether a PoE port
provides power and the time a PoE port provides power.
Good Expansibility
The S5300 series switches support iStack. Multiple S5300s start to construct a virtual chassis-shaped structure
immediately after stacking cables are connected. Stack members are classified into master, slave, and backup
switches. The backup switch reduces the duration of service interruption when the master switch fails. The S5300
supports intelligent upgrade. Therefore, the software version of a new switch does not need to be changed
when it is added to a stack. The stacking technology enables you to connect multiple switches through cables to
expand the system capacity and manage switches in a stack by using a single IP address, which greatly reduces
costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, the
iStack stacking technology has advantages in extensibility, reliability, and system architecture.
Simple Manageability
The S5300 supports GVRP, which dynamically assigns, registers, and propagates VLAN attributes to reduce the
network administrator's workload and ensure correct configuration of VLANs. The GVRP technology implements
dynamic configuration of VLANs. On a complicated network, GVRP can simplify VLAN configuration and reduce
network communication faults caused by incorrect configuration of VLANs.
5
 The S5300 supports MUX VLAN. The MUX VLAN function is used to isolate Layer 2 traffic between interfaces on
a VLAN. Subordinate VLANs can communicate with the MUX VLAN but cannot communicate with each other.
MUX VLAN is usually applied to enterprise intranets. With this function, a user interface can communicate with
Quidway S5300 Series Gigabit Switches

Product Brochure

a server interface but cannot communicate with other user interfaces. MUX VLAN prevents communication
between network devices connected to some interfaces or interface group but allows these devices to
communicate with the default gateway.
Abundant IPv6 Features
The S5300 provides dual protocol stacks and supports smooth upgrade. The S5300 hardware supports the IPv6/
IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4 tunnels, and ISATAP tunnels), and Layer
3 line-speed forwarding. Therefore, the S5300 can be deployed on IPv4 networks, IPv6 networks, and networks
that run both IPv4 and IPv6. This makes networking flexible and enables a network to migrate from IPv4 to IPv6.

Product Specification
S5300-SI S5300-EI
S5324TP-SI/ S5328C S5348TP S5352C S5328C S5352C
Item S5328C
S5324TP -SI/S5328C -SI/S5348TP -SI/S5352C -EI/S5328C -EI/S5352C
-EI-24S
-PWR-SI -PWR-SI -PWR-SI -PWR-SI -PWR-EI -PWR-EI
24*100/
48*10/100/ 1000
1000 1000Base-TX, 48*10/ 24*10/100 Base-X, 48*10/100
24*10/100/1000Base-TX,
M 4*100/1000 100/1000 /1000 4*10/100 /1000
4*100/1000Base-X Combo
port Base-X Base-TX Base-TX /1000 Base-TX
Port
Combo Base-
TCombo
S53TP Series have an extended slot
Extended
The S53C series have two extended slots，which can be installed with
slot
uplink subcard and stacking card respectively.
Forwarding
performance 36 Mpps 96 Mpps 72 Mpps 132 Mpps 96 Mpps 96 Mpps 132 Mpps
(pps)
Port
switching
48 Gbit/s 128 Gbit/s 96 Gbit/s 176 Gbit/s 128 Gbit/s 128 Gbit/s 176 Gbit/s
capacity
(bit/s)
Board
switching 256 Gbit/s
capacity
Complies with IEEE 802.1d.
EI series support 32 K MAC addresses and SI series support 16 K MAC addresses.
MAC address
Supports dynamic learning and aging of MAC addresses.
table
Supports static, dynamic, and blackhole MAC address entries.
Filters packets based on source MAC addresses.
Supports 4 K VLANs.
Supports guest VLANs and voice VLANs.
VLAN Supports VLANs based on MAC addresses, protocols, IP subnets, policies, and interfaces.
Supports 1:1 and N:1 VLAN switching.
Supports QinQ and selective QinQ.

6
 Quidway S5300 Series Gigabit Switches

Product Brochure
S5300-SI S5300-EI
S5324TP-SI/ S5328C S5348TP S5352C S5328C S5352C
Item S5328C
S5324TP -SI/S5328C -SI/S5348TP -SI/S5352C -EI/S5328C -EI/S5352C
-EI-24S
-PWR-SI -PWR-SI -PWR-SI -PWR-SI -PWR-EI -PWR-EI
Supports the RRPP topology and RRPP multi-instance.
Supports the Smart Link tree topology and Smart Link multi-instance and provides the millisecond-
level protection.
Supports SEP.
Reliability
EI series support BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM.
Supports STP, RSTP, and MSTP.
Supports BPDU protection, root protection, and loop protection.
Supports E-Trunk.
Supports static routes, RIPv1, RIPv2,
IP routing Supports static route, RIPv1, RIPv2, and ECMP.
OSPF, IS-IS, BGP, and ECMP
Supports Neighbor Discovery (ND).
Supports PMTU.
Supports IPv6 Ping, IPv6 Tracert, and IP v6 Telnet.
IPv6 features Supports 6to4 tunnels, ISATAP tunnels, and manually configured tunnels.
Supports ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or
protocol type.
Supports MLDv1/v2 snooping.
Supports IGMPv1/v2/v3 snooping and
IGMP fast leave.
Supports IGMPv1/v2/v3 snooping and IGMP fast leave. Supports multicast forwarding in a VLAN
Supports multicast forwarding in a VLAN and multicast and multicast replication across VLANs.
replication across VLANs Supports multicast load balancing
Multicast Supports multicast load balancing among member among member interfaces of a trunk.
interfaces of a trunk. Supports controllable multicast.
Supports controllable multicast. Supports port-based multicast traffic
Supports port-based multicast traffic statistics. statistics.
Supports IGMPv1/v2/v3, PIM-SM, and
PIM-DM.
Supports rate limit on packets sent and received by an interface.
Supports packet redirection.
Supports interface-based traffic policing and two-rate and three-color CAR.
Supports eight queues on each interface.
Supports WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms.
QoS/ACL
Supports re-marking of the 802.1p priority and DSCP priority.
Supports packet filtering on Layer 2 to Layer 4, filtering out invalid frames based on the source
MAC address, destination MAC address, source IP address, destination IP address, port number,
protocol, and VLAN ID.
Support queue-based rate limit and traffic shaping on interfaces.
7
 S5300-SI S5300-EI
S5324TP-SI/ S5328C S5348TP S5352C S5328C S5352C
Item S5328C
S5324TP -SI/S5328C -SI/S5348TP -SI/S5352C -EI/S5328C -EI/S5352C
-EI-24S
Quidway S5300 Series Gigabit Switches

Product Brochure

-PWR-SI -PWR-SI -PWR-SI -PWR-SI -PWR-EI -PWR-EI

Supports hierarchical user management and password protection.
Supports DoS attack defense and ARP attack defense.
Supports the binding of the IP address, MAC address, interface, and VLAN.
Supports interface isolation, interface security, and sticky MAC.
Supports blackhole MAC addresses.
Security Supports the limit on the number of learned MAC addresses.
Supports IEEE 802.1x authentication and the limit on the number of users on an interface.
Supports multiple authentication methods including AAA authentication, RADIUS authentication,
HWTACACS+ authentication, and NAC.
Supports SSH v2.0.
Supports CPU protection.
Supports iStack;
Supports MFF.
Supports the virtual cable test.
Supports Ethernet OAM (802.3ah and 802.1ag).
Supports interface mirroring and RSPAN.
Management Supports remote configuration and maintenance through Telnet.
and Supports SNMPv1/v2/v3.
maintenance Supports RMON.
Supports the iManager NMS and Web management.
Supports HGMP.
Supports the system log and hierarchical alarm.
Supports GVRP.
Supports MUX VLAN.
Working Working temperature: 0℃–50℃ (long term); -5℃–55℃ (short term); relative humidity: 10%–90%
environment (non-condensing)
AC:
Rated voltage: 100 V to 240 V AC, 50/60 Hz
Maximum voltage: 90 to 264 V AC, 50/60 Hz
Input voltage DC:
Rated voltage range: –48 V to –60 V, DC
Maximum voltage: –36 to –72 V DC
Note: POE hosts do not support DC power modules.
Dimensions
(width x 442×220
442×420×43.6
depth x ×43.6
height)

8
 S5300-SI S5300-EI
S5324TP-SI/ S5328C S5348TP S5352C S5328C S5352C
Item S5328C
S5324TP -SI/S5328C -SI/S5348TP -SI/S5352C -EI/S5328C -EI/S5352C
-EI-24S

Quidway S5300 Series Gigabit Switches

Product Brochure
-PWR-SI -PWR-SI -PWR-SI -PWR-SI -PWR-EI -PWR-EI
Non-PoE: Non-PoE: Non-PoE:
Non-PoE: < 56 W Non-PoE: < 78 W < 60 W Non-PoE:
< 40 W PoE: < 64 W POE: POE: < 88 W
Power
PoE: Max: PoE: Max: Max: <63W POE:
consumption
Max: 455 W 891 W Max: 907 W 917 W 472 W Max: 930 W
(PoE: 370 W) (PoE: (PoE: 740 W) (PoE: (PoE: (PoE: 740 W)
740 W) 740 W) 370 W)

Application scenario

Application in the access/convergent layer of large enterprise/campus network

The S5300 can function as the convergence device of large-scale enterprise networks and improves network reliability

through link aggregation and dual-homing.

Collaborator Ｂｒａｎｃｈ
Internet ISP WAN

Internet

DMZ

Intranet
Web Email, DNS
Server

S5300

S5300

Office Training Center Manufactory IT Center

9
 Application in IDC
The S5300 can be used in the data center to access the 1000M server and connect to upper-layer devices
Quidway S5300 Series Gigabit Switches

Product Brochure

through link aggregation. If multiple servers are available, you can use the stacking technology. The stacking

technology can improve network reliability.

Internet WAN

M*10GE
LAG

CSS

GE to desktop
Through the stacking technology, the S5300 can be connected to computers at a rate of 1000 Mbit/s. In this

case, only four pairs of fibers are required. Thus, the uplink fibers and interfaces of upper-layer devices are saved and

network reliability is improved.

10
Order Information

1. List of S5300 series Ethernet switches and optical modules

Quidway S5300 Series Gigabit Switches

Product Brochure
Product Description

S5324TP-SI-AC (input voltage: 220 V AC)

S5324TP-SI-DC (input voltage: –48 V DC)

S5328C-SI (supports two hot-swappable AC power modules, with the input voltage being 220 V or –48 V DC)

S5328C-EI (supports two hot-swappable AC power modules, with the input voltage being 220 V or –48 V DC)

S5328C-EI-24S (supports two hot-swappable AC power modules, with the input voltage being 220 V or –48 V DC)

S5348TP-SI-AC (input voltage: 220 V AC)

S5348TP-SI-DC (input voltage: –48 V DC)

S5352C-SI (supports two hot-swappable AC power modules, with the input voltage being 220 V or –48 V DC)

S5352C-EI (supports two hot-swappable AC power modules, with the input voltage being 220 V or –48 V DC)

S5324TP-PWR-S (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

S5348TP-PWR-SI (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

S5328C-PWR-SI (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

S5328C-PWR-EI (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

S5352C-PWR-SI (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

S5352C-PWR-EI (supports two hot-swappable AC power modules and PoE, with the input voltage being 220 V)

4*GE SFP uplink subcard

2*10GE XFP uplink subcard

2*10GE SFP + uplink subcard

4*10GE SFP + uplink subcard

11
 10G optical module

Optical Transceiver,XFP,10G,Multi-mode Module(850nm,0.3km,LC)

Quidway S5300 Series Gigabit Switches

Product Brochure

Optical Transceiver,XFP,10G,Single-mode Module(1310nm,10km,LC)

Optical Transceiver,XFP,10G,Single-mode Module(1550nm,40km,LC)

Optical Transceiver,XFP,10G Single-mode Module(1550nm,80km,LC)

Optical Transceiver ,SFP+,10G Multi-mode Module (850nm,0.3km,LC)

Optical Transceiver ,SFP+,10G Single-mode Module (1310nm,10km,LC)

GE-SFP optical module

Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)

Optical Transceiver,ESFP,GE,Multi-mode Module(850nm,0.5km,LC)

Optical Transceiver,SFP,GE,Single-mode Module(1310nm,10km,LC)

Optical Transceiver,eSFP,GE,Single-mode Module(1310nm,40km,LC)

Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,40km,LC)

Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,80km,LC)

Optical Transceiver,ESFP,GE,Single-mode Module(1550nm,100km,LC)

FE/STM-1-SFP optical module

Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC)

Optical Transceiver,ESFP,100M/155M,Single-mode Module(1310nm,15km,LC)

Optical Transceiver,eSFP,FE,Single-mode Module(1310nm,40km,LC)

Optical Transceiver,eSFP,FE,Single-mode Module(1550nm,80km,LC)

BIDI-SFP optical module

Optical Transceiver,SFP,GE,BIDI Single-mode Module(TX1490/RX1310,10km,LC)

Optical Transceiver,SFP,GE,BIDI Single-mode Module(TX1310/RX1490,10km,LC)

Optical Transceiver,SFP,FE,BIDI Single-mode Module(TX1310/RX1550,15km,LC)

Optical Transceiver,SFP,FE,BIDI Single-mode Module(TX1550/RX1310,15km,LC)

CWDM-SFP optical module

Optical Transceiver-eSFP-1571nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1591nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1551nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1511nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1611nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1491nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1531nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

Optical Transceiver-eSFP-1471nm-100M~2.67Gbps-0dBm-5dBm--28dBm-LC-80km

For more information, visit www.huawei.com or contact the Huawei local sale office.

12
Product Brochure
Quidway S5300 Series Gigabit Switches

13
 Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademark Notice
Realize Your Potential
Realize Your Potential

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.

HUAWEI TECHNOLOGIES CO., LTD.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE Huawei Industrial Base
LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED Bantian Longgang
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL. Shenzhen 518129, P.R. China
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL HUAWEI Tel: +86-755-28780808
TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS
ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS MANUAL. www.huawei.com